pet blow moulding used for sale

We offer a refurbished rotary piston blower brand: RKR / Robuschi Type: K70R. See pictures. All our refurbished blowers are equipped with new bearings and sealing elements. If you have any questions, please call.

We offer a refurbished rotary piston blower brand: RKR / Robuschi Type: K80R. See pictures. All our refurbished blowers are equipped with new bearings and sealing elements. If you have any questions, please call.

The blower level is completely overhauled. All our refurbished blowers are equipped with new bearings and sealing elements. If you have any questions, please call us.

Aerzener VM 9 R Delta Screw Screw Compressor with soundproofing hood Suction pressure: 1 bar Suction volume: 600m3/h Engine power: 55 kW Very good condition, directly from production!

Aerzen GMA 13.6 Rotary piston blower with soundproofing hood Engine power 30 kW Very good condition, directly from production!

This pharmaceutical grade bottle washing machine has been designed to meet the needs of the most demanding customers and to comply with international standards in order to provide high level performance along with easy access to components, all in a small footprint. This rotary washing system was developed and designed keeping in mind the high level of cleanliness required in the pharmaceutical industry. High washing and rinsing performance. Small footprint, size and utility consumption. The washing chamber is made entirely of stainless steel and is surrounded by a Plexiglass cover. Presence of an electrical panel for easy control management.

The rotary piston blower is completely overhauled. All our refurbished blowers are equipped with new bearings and sealing elements. If you have any questions, please call us.

Side channel blower SIEMENS type ELMO-G 2BH1510-7HC56. Power 4 kw. With intake and exhaust silencer Diameter inlet 50 mm. Diameter outlet 60 mm. The machine got checked, a test drive hes been done.

Blow gun

Side channel blower, side channel blower, ring blower, vacuum pump, blower -Manufacturer: Siemens, side channel blower side channel blower -Drive: 0.3 KW -Speed: 2800 rpm -Connection input: Ø 280 mm -Dimensions: Ø 280 x 280 mm -Weight: 12 kg

Side channel blower, side channel blower, ring blower, vacuum pump -Drive: 0.25 kW -Voltage: 220 V -Volume flow rate: 25 m³/h -Pressure height: 1500 mm WS -Dimensions: Ø 330 / 425 mm -Weight: 13 kg

Blow-through lock, supply, cell lock, cell wheel lock, cell wheel lock, dosing lock used AZO Ltd. Type: Z100/2P Inlet approx.: 250 mm Height approx. 450 mm Cell wheel approx. 320 mm Cell wheel width approx. 250 mm approx. 8 cells Hole circle flange approx. 335 mm with suction filter Geared motor with variable speed LENZE 11.342.13.12 0.5 kW 3.3 to 50 rpm 220/380 V Total dimensions approx.: 1500 x 600 x 450 mm The lock was used in the food industry. Probably for transport and dosage of sugar. Subject to changes and errors in the technical data, dates and prices as well as intermediate sale.

High Pressure Centrifugal Fan, Pressure Blower, Ventilation Fan, Centrifugal Blower, Blower -Manufacturer: Bauknecht, ventilation fan -Type: P900 02 90S NF 1.1/2-5m -Power: 1.5kw -Speed: 2850 rpm -further data: not available -Dimensions: 360/355/H240 mm -Weight: 29kg

High pressure radial fan, dust extractor fan, exhaust gas extractor, welding smoke extractor, extractor fan, pressure fan, vacuum fan, ventilation fan -Motor power: 0.29 kW -Speed: 1800 rpm -Volume output: unknown -Connection air duct: 164 x 95 mm -Dimensions: 465/325/H230 mm -Weight: 11 kg

radial fan, dust extraction blower, fan, extraction, dust blower -Motor power: 0.37 kW -Speed: 2800 rpm -Max. volume flow: m³/h -Max. pressure: Pa -Inlet connection: Ø 190 mm -Outlet connection: Ø 190 mm -Impeller: Ø mm -Dimensions: 700/580/H560 mm -Weight: 37 kg

High-pressure radial fan, dust extractor, exhaust gas extractor, welding smoke extractor, extractor, fan, pressure fan, vacuum fan, ventilation fan -Motor power: 0.175 kW -Speed: 1310 rpm -Volume output: unknown -Connection air duct: 130 x 135 mm -Dimensions: 340/290/H130 mm -Weight: 6 kg

Blower filter device, welding smoke filter, welding smoke extractor, breathing apparatus -filters -in the suitcase -with out battery -Dimensions: 420/165/H335 mm -Weight: 3.2 kg

Radial fan, chip extraction blower, fan, extraction, chip blower -Motor power: 15 kW -Inlet connection: Ø 350 mm -Outlet connection: Ø 250 mm -Dimensions: 1050/1060/H1240 mm -Weight: 276 kg

Radial fan, chip extraction blower, fan, extraction, chip blower -Engine power: 37 kW -Speed: 1470 rpm -Inlet connection: Ø 600 mm -Outlet connection: Ø 600 mm -Dimensions: 1600/1400/H1800 mm -Weight: 800 kg

Radial fan, chip extraction blower, fan, extraction, chip blower -Engine power: 18.5 kW -Speed: - rpm -Volume flow rate: approx. 7000 m³/h -Total pressure: approx. 2800 Pa -Inlet connection: Ø 280 mm -Outlet connection: Ø 350 mm -Dimensions: 1120/840/H930 mm -Weight: 284 kg

Radial fan, chip extraction blower, fan, extraction, chip blower -Engine power: 37 kW -Speed: 1470 rpm -Volume flow: unfortunately not visible -Total pressure: - da Pa -Inlet connection: Ø 700 mm -Outlet connection: Ø 700 mm -Dimensions: 1750/1700/H2460 mm -Weight: 900 kg

Radial fan, chip extraction blower, fan, extraction, chip blower -Engine power: approx. 22 kW -Speed: not visible -Volume flow: not visible -Inlet connection: Ø 280 mm -Outlet connection: Ø 450 mm -Dimensions: 1050/900/H920 mm -Weight: 280 kg

The blower is installed in a soundproof hood with base frame, safety valve, check valve and attachments. The drive motor can be designed according to customer specifications. The compressor stage has been overhauled. You can also purchase only the GM 80 L stage. If you have any questions, please do not hesitate to call.

CNC - Sheet Metal Parts - Roll Straightening Machine for plane straightening and relaxing of thermally cut sheet metal parts, for stamped parts, for sheet metal parts that have been cut to size with the sheet shear. Our roller straightening machine is a purely electric machine, not hydraulics, the electronically controlled servo motors enable automatic CNC – controlled face straightening in the continuous process. CNC – controlled precision sheet metal parts roll straightening machine for sheets from 0.7 mm to a maximum of 14 mm sheet thickness at 500 mm sheet width Largest sheet width 1,500 mm Guideline power over the full width - - Steel sheet quality SR235 from 0.7 mm to 10 mm - Stainless steel sheet from 1 mm to 6 mm Planning by - 19 piece straightening rollers with Ø 50 mm 21 pieces of intermediate rollers with Ø 30 mm 13 pieces of support roller sets with ...

Refurbished blower Werner & Pfleiderer RC 2 4260 RB Power 37 kw, 50 m³/min, 1270 mm water column Air intake 160 mm ø, GL 180° 115 mm ø blow-out, New bearings, V-belt new, With basic frame and vibration damper New engine installed (Solan )

Offer here various spare parts from a SIG Blomax 20 Series 3 yoc. 2006. 220. Transport mandrels z. Teil neu. Conversion kit to PCO 1881. Mother moulds, Kpl. blowing stations. Heating box etc. see also pictures

radial fan, dust extraction blower, fan, extraction, dust blower -Motor power: 0.4 kW -Speed: 1276 rpm -Total pressure: 260 Pa -Volume flow rate: 3200 m³/h -Inlet connection: Ø 400 mm -Outlet connection: 360/470 mm -Dimensions: 1130/560/H780 mm -Weight: 106 kg

The blower is sold overhauled. The photos show the blower before the overhaul. All our refurbished blowers are equipped with new bearings and sealing elements. If you have any questions, please do not hesitate to call.

A refurbished positive displacement blower is offered Brand: Aerzener Maschinenfabrik Type: GMB 039.0 See pictures. All our refurbished blowers are equipped with new bearings and sealing elements. If you have any questions, please do not hesitate to call.

Original wrestler holders (Bekum) - Completely overhauled - Quick change function - Immediately available Original blow pin holders (Bekum) - Completely refurbished - Quick change funcion - Immediately available

Side channel blower, ring blower, vacuum pump -Drive: 0.75 kW -Feed rate: 130 m3 / h -Max. Compression pressure: 195 mbar -Speed: 2800 rpm -Number: 2x pumps available -Price per piece -Dimensions: 320/280 / H420 mm -Weight: 16 kg / piece

radial fan, dust extraction blower, fan, extraction, dust blower -Motor power: approx. 3 kW -Inlet connection: Ø 230 mm -Output connection: 335 x 290 mm -Impeller: Ø 340 mm -Dimensions: 540/580/H660 mm -Weight: 80 kg

Original Brass Thorn Shots (Bekum) - New - Screw thread - Immediately available - Thread M22x1 Original blow pin holders (Bekum) - New - Screw thread# - Immediately available - Thread M22x1

Various used blow molds in great condition Size: Up to 1 liter 1-2 compartment cavity Various used blow molds in super condition Size: Up to 1 liter 1-2 compartment cavity

fan, ventilator, blower -Manufacturer: Prein fan, fan ventilator, radial fan -Type: RES 85/42 -Voltage: 80 V / 40 W -Fan wheel: Ø 90 x 45 mm -Number: 2x blowers available -Price: per piece -Dimensions: 180/160/H140mm -Weight: 1.6 kg/pc.

fan, ventilator, blower, duct fan, tube fan -Manufacturer: VEM, fan type 2N611 -Voltage: 220 V / 30 W -Fan wheel: Ø 90 x 45 mm -Dimensions: Ø 205 x 110 mm -Weight: 1.1 kg

fan, blower, fan wheel, cross-flow fan, cross-flow blower, cross-flow ventilator, roller fan -Fan blower cross-flow fan -Engine: EMI 105B-50110/3 -Voltage: 230V / 110/300 W / 1100 rpm -Fan wheel: both sides Ø 150 x 240 mm -Dimensions: 1040/220/H200 mm -Weight: 10 kg

Side channel compressor, side channel blower, ring blower, vacuum pump, blower -Manufacturer: VEB, side channel vacuum pump side channel compressor -Type: GR2HVX-40/290-P -Drive: VEM 1.5 kW 2840 rpm -technical data: see photo type plate -Dimensions: 400/330/H430mm -Weight: 32 kg/piece

Fan, blower, radial fan -Manufacturer: AMA, fan, radial fan -Type: Motor 25105109 -Power: 0.6 kW / 2800 rpm -Voltage: 220/380 V -Fan wheel: Ø 225 x 70 mm -Dimensions: Ø 300 x 370 mm -Weight: 13.2 kg

Side channel compressor, side channel blower, ring blower, vacuum pump, blower -Manufacturer: Siemens, side channel blower side channel compressor -Type: Elmo-G 2 BH2 000-0AH02 -Drive: 0.2 kW -Speed: 2800 rpm -Dimensions: 250/235/H255 mm -Weight: 8.6 kg

Fan, ventilator, blower, duct fan, pipe fan -Manufacturer: SEW-Eurodrive ebmpapst, fan blower ventilator -Type: A4S 200-AA 02-01 0.042 kW / 1350 rpm -Voltage: 230 V -Dimensions: 225/210/H210 mm -Weight: 2.9 kg

Vacuum cleaner motor, radial blower for sweeper, radial blower, fan, blower -Manufacturer: SPAL, radial fan from sweeper Hako Hamster 500 E -Type: 008-B37/C-42D -Voltage: 24 V -Connection input: Ø 70 mm -Connection output: 100 x 45 mm -Dimensions: 150/120/H145 mm -Weight: 0.7 kg

Side channel compressor, side channel blower, ring blower, vacuum pump, blower -Manufacturer: Leister, side channel vacuum pump side channel compressor -Type: G63A2 -Drive: 0.25 kW -Speed: 2850 rpm -Dimensions: 310/220/H270 mm -Weight: 8.2 kg

Blowing machine SIDEL SBO 20 Series II year of manufacturing: 2000 capacity: up to 28.000 bph neck size: PCO 28-1881 inclusive: Preform feeding system and chiller The machine is still installed and in production in Germany until approx. November / December 2022

Side channel compressor, side channel blower, ring blower, vacuum pump, blower -Manufacturer: Leister, side channel vacuum pump side channel compressor -Type: G63A2 ID -Drive: 0.25 kW -Speed: 2850 rpm -Dimensions: 370/220/H225 mm -Weight: 7.9 kg

Side channel compressor, side channel blower, ring blower, vacuum pump, blower -Manufacturer: Siemens, side channel blower, side channel compressor -Type: Elmo-G 2BH1 807-1AC17 -Drive: 5.50 kW -Speed: 2920 rpm -Dimensions: 680/500/H520 mm -Weight: 122 kg

A refurbished positive displacement blower is offered Brand: Aerzener Maschinenfabrik Type: GMB 16f13 All our refurbished blowers are equipped with new bearings and sealing elements. If you have any questions, please do not hesitate to call.

Side channel blower, side channel blower, ring blower, vacuum pump -Drive: 1.1 kW -Speed: 2880 rpm -Connection: 1 1/2 inch -Dimensions: 420/280/H340 mm -Weight: 20 kg

radial fan, dust extraction blower, fan, extraction, dust blower -Type: HL8-355/595-A -Motor power: 15 kW -Speed: 2900 rpm -Volume flow rate: 10,000 m³/h -Total pressure: 3500 Pa -Inlet connection: Ø 350 mm -Outlet connection: Ø 350 mm -Dimensions: 2000/1000/H1350 mm -Weight: 260 kg