pet blow mould used for sale

HS451, built in 1993, retrofit 2021 Available with 1-fold/2-fold head/3-fold, bottle test Optionally with E-extruder

HW551, Extruder 55mm HDPE Single Head Up to 300cm3

HS451, built in 1993, Available with 1-fold/2-fold head/3-fold Optionally retrofit to PLC and E-extruder

For containers up to 30 ltr. Continuous extrusion. Clamping force 30 tons. With waste punch and handover

Single-station machine for containers up to 1 ltr. Extruder S 50/20D. Single head, programmed. 380V 50 Hz. Available now!

Lock cylinders, carriage cylinders, WDS cylinders, holding arms for punching tools, screw S 30/24D, and much more

Bekum BA 52 Blow Moulding Machine Stations: Single Clamping Force: 450 kN Control: Original Bekum Extruder: S 701 Head: 6 Litre Accumulator-Head new Max. Bottle volume: 60 Litres Mold Dimensions (Length/Width/Depth):1200/750/2150-300 (mm)

1 piece new, S 80/24D, for PUR 1 piece little used, S 80/24D, with maddock and mixed part

Extruder S 45/22D. Single head, machine can also be equipped with double or triple head. With external leak tester. Very good condition

Stretch blow moulding machine from EtekISBM Line = Injection stretch blow moulding Stretch blow moulding machine for disposable PET bottles made from PET preform blanksStretch blow moulding machine for production in rotary transfer processManufacturer: ETEK / GF-Industries Type Supra 800 sv 1Serial number: 22000225Year of construction: 2012Power: 90 kWNet connection: 400 volts, 50 HzNet weight approx. 6000 kgas good as new; used

Extruder S 36/22D. Double head, can also be supplied with single or triple head. Good condition

overhauled in 2012 and equipped with a new Beckhoff control system with touchscreen. Extruder S 50/22D for HDPE single head with Moog servo valve and WDS. Steffes lekstester is there. Very good condition. Available from stock immediately, subject to prior sale

Extruder S 50/22D, Doppelkopf 100 Stich. Machine can also be equipped with single or triple head. Good condition

Extruder S 45/22D. Double head 70mm stitch, machine can be equipped with single head. Good condition

Extruder S 55/22D. Single head with WDR. With Beckhoff control and touch screen. Very good condition

HESTA HK 453 Year of manufacture 2002 - completely overhauled in 2021 Extruder 45 mm, 22 D Control Beckhoff New quill head, a new wall thickness control and new hybrid pump Denison The machine has been in operation for less than 50 hours since the overhaul in 2021, and in almost mint condition.

Used Revised Sipa Rotary Blow Molding Machine 2008: A Comprehensive Overview Are you in the market for a reliable blow molding machine? Look no further than the used Sipa Rotary Blow Molding Machine 2008. In this article, we will delve into the details of this machine, exploring its features, specifications, and benefits. Whether you are a seasoned professional or just starting in the industry, this article will provide you with valuable insights into the Sipa SFR8. 1. Introduction Blow molding machines play a crucial role in the production of various plastic containers. The Sipa Rotary Blow Molding Machine 2008, also known as the SFR8, is a popular choice in the industry. It offers efficiency, precision, and versatility, making it an excellent investment for manufacturers. Let's explore its features in detail. 2. Overview of the Sipa Rotary Blow Molding Machine 2008 The Sipa Ro ...

Container Size With Actual Configuration: 1 l // Number Of Heads: 1

Neck: PCO 1881 // Output: 12000 U/h

Neck: 1881 // Output: 25000 U/h

Neck: PCO1881 // Output: 27000 U/h

Neck: PCO1880, 1881 // Output: 24000 U/h

Accumulation Head Capacity : 4 l // Number Of Heads: 1

Container Size With Actual Configuration: 2 l // Number Of Heads: 8

Container Size With Actual Configuration: 2 l // Number Of Heads: 5

Accumulation Head Capacity : 1,8 l // Number Of Heads: 1

Neuweriger Doppelkopf make W. Müller. With WDS and filter

Single-station machine up to 8 ltr. Extruder S 90/20D. Single head with viewing strip. With leak tester and conveyor belts. Good condition

Year of manufacture: 1989 / 2018 overhauled Single head max nozzle 180 mm PWDS (Feuerherm) Control: Beckhoff Operating hours: since overhaul 2018

Year of Make: 2004 Clamping force: 60to (588kN) Working hours: 48,930 h Accumulation head - BFKS 6.3 Climbing Unit Max Opening: 1,450 mm Column passage: 900x1200 mm

Year of Make: 1999 Clamping force: 80kN Volume: 5 liters

Year of Make: 1998 Extruder 60/24D incl. integrated test device Double blowing head 85 mm pitch size, incl. bottle discharge

Year of Make: 1991 Clamping force: 20kN Volume: 1 litre Double station

Year of Make: 1986 Clamping force: 40 kN Double station

used extruder motor 135 kW

used extruder in good condition. Complete with motor, gearbox and heating bands

1.0 St. gebr. Blow Molding Machine Manufacturer: Fischer - W. Müller Type: FMB 3-120 Year of Make: 1999 Clamping force: 120 tons Extruder Type: 120/24 WT Storage head: BFKS25 corresponds to approx. 17.75 kg The machine can hold drums of up to a size 200 liters. Video available!

PROCREA INJECTION BLOW MACHINE TYPE : Rev 100 This PROCREA REV 100 injection blow molding machine can produce fully finished, waste-free hollow containers, similar to injection molding, using various plastics. It features fully automatic cycles, with capacities ranging from 5 cc to 750 cc and weights from 5 g to 100 g. This machine is designed to work with molds of 1 to 4 cavities, and its high production rate is achieved thanks to the turret system, which performs all injection, blow molding, and finished part ejection operations in a single step. Mold construction for the Rev 100 is very simple thanks to the automatic extraction system applied to the turret.

Two-station machine for containers up to 5 ltr. With double head 180 mm center to center. 2 extruders - one for each side. With integrated leak tester, mill with feed belts, bottle belt. Material feeder and mixer.

BEKUM BA52 Blow Molding machine Type : BA 52 / S 801 Year: 1993 1 station Clamping force : 450 kN Original BEKUM control Extruder type : S 701 Refurbished 6-liter head with accumulator Head and screws reconstructed Max.bottle volume: 60 Litres Mold dimensions (L x W x H): 1200/750/2 x 150-300 (mm)

BEKUM BA 200 Blow Molding Extrusion Machine Type: BA 200/ S123 Year: 1990 8L Accumulator Head 1 Head and 1 Station Material Processed: PE Production Capacity: 500 kg/h Extruder Type: Accumulator Number of Extruders: 1 Screw Diameter: 120 mm L/D Ratio: 24 Thickness Control: Yes Material Feed Opening Stroke: 710 mm Clamping Force: 800 kN There are 2 machines

PET BLOW MOLDING - MAG PLASTIC - Blow molding solution for PET bottles Year: 1994 Type: SSB 40 Input voltage: balanced three-phase 400 V Frequency: 50 or 60 Hz +- 5% Total installed power: 86 kW (Option 102 kW) Weight: Approx. 5,000 kg Number of molds: 4 Clamping force: 250 KN Total opening stroke: 120 mm

Machine Type: PB1E/S E42/24 (Electric) Year: 2008 Extruder Screw Diameter: 42mm Screw L/D Ratio: 24 Capacity : 1L Extruder Motor Power: 22kW Extruder Heater Power: 4.1kW Heating Zones on Plasticizing Cylinder: 3 Extruder Cooling Fans: 2 Plasticizing Capacity with PE: 24kg/h Plasticizing Capacity with BFPE: 26kg/h Working hours : 8000h Simple station Double head with 100 mm center distance. (2 x 500ml)

PLASTIBLOW Machine type: PB1E/D E60/25 (Electric) Year: 2007 Extruder screw diameter: 60mm Screw L/D ratio: 25 Molds: 2 Stroke: 260mm Clamping force: 35 Capacity : 3L Extruder motor power: 30kW Extruder heater power: 9.6kW Heating zones on laminating cylinder: 4 Extruder cooling fans: 3 Laminating capacity with PE: 58kg/h Laminating capacity with BFPE: 75kg/h Working hours : 24,000h Double station Dual head with 100mm center distance. Head modified from the original (3 heads with 85mm center distance => 2 heads with 100mm center distance) in 2021.

Manufacturer: Krupp-Kautex Machine Type: KB50 Year of Make: 1987 Guard Locking 500kN Blowing volume 120 litres Max. WZ weight: 2x750kg Panel size horizontal x vertical: 700mm x 800mm Opening path: 2x 350mm Max. opening width: 1300mm Minimum tool installation height: 2x 320mm Connections for pneumatic functions: 6 Connections for hydraulic functions: 4 Blowing head: Battery head 5 liters Nozzle diameter min/max: 30/200mm (nozzle assortment available) Extruder: Helibar Screw diameter: 80mm L/D Ratio: 20 Plasticizing capacity: 175kg/h at 40 1/min, 350kg/h at 84 1/min Control: MOOG TMC4 Accessories: Debutzstation with linear device and various conveyor belts (incl.) • Machine fully functional • Demonstration in wet or dry running possible • Availability: immediately

Manufacturer: Kautex Machine Type: KBS2-120 Year of Make: 2004 Guard locking 1,000 kN Blowing volume 220 litres Max. WZ weight: 2x 2500kg Railbar spacing horizontal/vertical: 1500 / 1600 mm Panel size horizontal x vertical: 1200mm x 1200mm Opening path: 2x 400mm Max. opening width: 1600mm Minimum tool installation height: 2x 400mm Die head: Battery head 8 liters Nozzle diameter min/max: 100/300mm (nozzle assortment available) Extruder: Helibar Screw diameter: 100mm L/D Ratio: 24 Control: SIG Kautex Accessories: various technology on request • Machine fully functional • Demonstration in wet or dry running possible

KAUTEX KB 150 Blow Molding Machine Year: 1981 Max. blow volume (dm³): 220 L Clamping force: 70 t Screw diameter (mm): 120/20 mm Hourly output (kg/h) (with PE): 420 kg/h Accumulator head volume (dm³): 20 L Approx. shot weight (kg): 15.2 kg Min. die diameter (mm): 100 mm Max. die diameter (mm): 350 mm Platen dimensions H x W (mm): 1200 x 1200 mm Max. platen opening (mm): 1500 mm Min. platen opening (mm): 700 mm Longitudinal head offset: 0 to +200 mm Transverse head offset: ± 10 mm False platens (mm): 150 x 2 mm Mold opening stroke (mm): 2 x 400 mm Dimensions (L x W x H): 9200 x 6000 x 5200 mm Max. tooling weight (kg): 3000 kg Max. blow pressure: 7 bar Max. hydraulic auxiliary pressure: 200 bar Number and type of hydraulic auxiliaries: 2 (5/3) Number of pneumatic auxiliaries: 2 (3/2) Unscrewing: Yes, 2 (VB2 carriage)

Overview The KSB4000 blowing machine was manufactured in 2003 by the Austrian machine builder KOSME. For capacity reasons the blow moulder is now for sale and can be visited at side. Technical details  Capacity: 4.000 bph  4 cavities Dimensions (LxWxH): 4.500 mm x 1.600 mm x 3.250 mm  space requirement approx. 22 m² (incl. preform feeding system) Bottles 1,0 l PET 0,5 l PET 0,33 l PET Scope of delivery  Blow molding machine is completely equipped with the system for preform feeding (the silo, the preform elevator, the preform aligner and the preform infeed). Also included is the air conveyor with a length of approx. 25 meter and 5 blower motor.

Single-station machine for containers up to 2 ltr. Extruder S 633/24D. Original condition, built around 1995

Single-station machine for containers up to 2 ltr. Extruder S 633/24D. Partial retrofit in 2019. Control system, control cabinet, cabling, frequency converter renewed. Very good condition