pet blow mould used for sale

Workpiece dimensions up to approx. 5 m. length, 250 mm width Sliding blocks for possible loading with singulator Transverse transport with 5 parallel driven belts, approx. 1.5 m in length, motor 0.37 kW Intermediate distance x 1m25 x 0m80 x 0m80 x 1m00 x 4 perpendicular stop rollers 4 non-driven feed rollers 1 Interroll driven feed roller, built-in motor 0.37 kW, speed 0.20 m/s Working height 70 cm Electrical cabinet not included

This 3-axis DEMAG ERGOTECH 1500-840 was manufactured in 1999. It features a clamping force of 1500 kN and a screw diameter of 45 mm, making it suitable for processing various materials such as PA, PP, PE, and ABS. The machine has a maximum pressure of 190 bar and a stroke volume of 358 cm³. If you are looking to get high-quality injection moulding capabilities, consider the DEMAG ERGOTECH 1500-840 hydraulic injection moulding machine we have for sale. Contact us for further details.

This DEMAG SYSTEC 80/420-310 was manufactured in 2008. It features a clamping force of 800 kN and a screw diameter of 35 mm, making it suitable for processing various materials such as PA, PP, PE, and ABS. The machine includes a Wittmann linear robot and a Gravimax 14R gravimetric blender. If you are looking to get high-quality injection moulding capabilities, consider the DEMAG SYSTEC 80/420-310 hydraulic injection moulding machine we have for sale. Contact us for further details.

This 6-axis Arburg Allrounder 520 S 1600-290 / 290 was manufactured in 2015. It features a highly wear-resistant thermoplastic cylinder with a 30 mm diameter and a drive unit powered by a 30 kW motor. The machine is equipped with advanced control systems for both injection units and supports multi-component processing. If you are looking to get high-quality injection moulding capabilities, consider the Arburg Allrounder 520 S 1600-290 / 290 hydraulic injection moulding machine we have for sale. Contact us for further details.

This 6-axis Krauss Maffei 1000-8000 M hydraulic injection moulding machine was manufactured in 1997. It features a maximum X-axis travel of 1000 mm, Y-axis travel of 1400 mm, and Z-axis travel of 3500 mm. The machine includes an injection pressure limit of 185 bar and a metering stroke of approximately 465 mm. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei 1000-8000 M machine we have for sale. Contact us for further details.

This Krauss Maffei KM 800-6100MX was manufactured in 2007. It features a clamping force of 8000 kN and an injection volume of 2695 cm³, making it suitable for various materials such as PA, PP, PE, and ABS. The machine is equipped with a Wittmann Robot System for enhanced handling capabilities. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei KM 800-6100MX hydraulic injection moulding machine we have for sale. Contact us for further details.

Code: 0364 Brand: SAC Model: TS 110 - CE Standard Spindle moulder for milling and jointing operations on wood, plastics, composite materials, and various - CE Standard Technical specifications: Table dimensions mm 1100 x 900 Table height mm 860 Spindle diameter mm 40 Max applicable tool diameter mm 240 Spindle vertical stroke 2900-4500-6000-10000 rpm Motor power 5,5 Hp Overall dimensions mm 1100 x 900 x 1100 h Weight kg 780

Gomad FD-2 Low Spindle Milling Machine Spindle Diameter 25mm Spindle length 140mm Main motor 2 speed with a power of 5.9/4.4kw Replacement spindle Rotation speed change on the belt 3000/4500/6000/9000

The blower is with side admittance completely with impulse.

Kosme KSB 3000, with 3 tools, achievement approx. 3300 Fl/h with 1.5 l

Material conveying stations for powdered materials, on movable base, with material dropler in V2A (dimensions 700 mm x 700 mm, incl. protective grille inside), blow-through cell wheel lock in V2A (200 mm , 0.55 kW drive) Fabr. Seeger, AerzenER GMA rotary piston blower incl. drive, air filter, compensating vessel and control cabinet.

The blower level is completely overhauled. All our refurbished blowers are equipped with new bearings and sealing elements. If you have any questions, please feel free to call.

; ready for operation

The blowers are fully incorporated into a soundproof cover with base frame, safety valve, check valve and mounting parts. The motor can be installed according to customer specifications. The stage will be overhauled on request.

AERZEN rotary blower GMB 14.8 - used, reconditioned - DESCRIPTION 3-bladed fan speed with integrated pulsation reduction Basic rack with integrated discharge silencer Tensioning device for the belt drive Pressure / vacuum valve Connection box with built-in non-return valve and flange for valve and starting discharge Drive motor (three phase motor) MANUFACTURER'S SPECIFICATIONS Manufacturer: Aerzen, Germany Type: GMB 14.8 YOM: 1976 TECHNICAL DATA Intake rate: 15,5 m ³/min Flow pressure: 0,73bar (max. 1,0 bar) Delta p: 730mbar Blower rev: 1.337rpm Motor: VEM 37kW 380Volts 50Hertz 1.460rpm CONDITION used, reconditioned, ready for operation SERVICE/RECONDITIONING New pulsation silencer box, new oil, new spray painting VISIT Please visit us at any time for an inspection. Test run is possible. REMARK Large stock of used machinery and equ ...

mould set 0.5 lt for blow moulding machine SIDEL SBO 16 series 2

see pictures

The fan speed is refurbished, can be supplied as a complete unit.

; ready for operation

; ready for operation

The injection blow molding machine VICTOR MACHINERY MSZ 30 for the production of bottles was built in 2015. Technical parameters : - screw diameter: 40 mm - screw L / D: 22: 1 - injection weight (HDPE): 190 g - maximum speed of the screw: 10-225 rpm. - heating power: 8.3 kW - injection clamping force: 292 kN - blow clamping force: 46.7 kN - maximum plate size (L x W): 400 × 270 mm - minimum mold thickness (H): 180 mm - mold heating capacity: 3 kW - opening: 220 mm - drying cycle: 3.5 sec. - engine power: 15 kW - hydraulic pressure: 15 MPa - suitable bottle range: 3-800 ml - maximum bottle height: ≤190 mm - maximum bottle diameter: ≤100 mm - minimum air pressure: 1MPa - compressed air discharge rate: ≥0.7 M3 / mm - water flow: 3 M3 / h - total rated power with mold heating: 26.3 kW - dimensions (L x W x H): 3.26 x 1.2 x 2.2 m - net weight: 4 tons

Industry - fan / blower manufacturer: DSD air Division (today: Ferrostaal air technology GmbH) Type: Dara 1000 R Year of construction: 1992 Flow rate: 35,000 m ³/h Pressure: 6,500 PA Speed min.: 2,035 U/min Speed max.: 2,160 rpm Power: 75 kW Air density: 1.1222 kg / m ³ Maximum temperature: 90 ° C Original price: 68.000,00 € net In very good condition!

Blow-through lock, all-out lock, cell lock, rotary valve, cell wheel lock, dosing lock used AZO GmbH Type: Z100/5 F 4.6 Inlet approx.: Ø 250 mm Height approx. 450 mm Cell wheel Ø approx. 300 mm Rotary wheel width approx. 250 mm Wing height approx. 15 mm approx. 8 cells Hole circle flange Ø approx. 335 mm with intake filter NW 100 EIT-4181 geared motor Sew 0.18/0.66 kW 7.3/30 rpm 380 V Total dimensions approx.: 1800 x 400 x 450 mm The lock was used in the food industry. Presumably for transport and dosage of flour. used Rotary Valve, Rotary Airlock, Dosing Valve, Dosing System Changes and errors in the technical data, information and prices as well as intermediate sale reserved.

Lock valve vacuum pump Status: used, tested, functional Manufacturer: Kinney Type: KT-300 D Engine: 400V equipment: mineraloil nominal suction digesters: 25 m3/h End pressure: <0.008 mbar (abs.) Including: user manual o elfilling (

Hammer muehle with blower, filler hopper and easily changeable sieves for the wuenschte fineness of the grinding material. Hammermuehle KH3 11 kW

Waelz Piston Pump (Rootsblowesis) Status: Generalueberholt Manufacturer: Leybold Type: WA 251 Gewaehrleitung: 12 months Zubehoer: User Manual; Spare parts list; Oil filling delivery time: from stock

Waelz Piston Pump (Rootsblowesis) Status: Generalueberholt Manufacturer: Leybold Type: WA 501 Gewaehrleitung: 12 months from delivery Zubehoer: User Manual; Spare parts list; Oil filling delivery time: from stock; ready for use

wire diameter: 3,0 - 5,5 mm nail length: 15 - 80 mm output: 150/300 St./min. -for steel pins-; very good

Waelz piston pump (rootsblowesis) Status: Generalueberholt Manufacturer: Leybold Type: Ruvac WS 501 Gewaehrleitung: 12 months Spare parts list; Oil filling delivery time: from stock; ready for use

Auxillary blower for Wichmann WX12V28 Allweiler SNBA-M280GR43C9.2/1w12

Waelz piston pump (roots blow- Manufacturer: Pfeiffer Type: WKP 500 A Suction moulds: approx. 500 m3/h Cat. Nr.: PP W31 001 Status: Generalueberholt Gewaehrleitung: 12 months Including: oil filling, operating instructions; ready to use

Waelz piston pump (rootsblowesis) Manufacturer: Pfeiffer Type: WKP 2000 A Suction suction systems: approx. 2065 m3/h engine: 5.5 KW Cat. Nr.: PP W61 000 Status: Generalueberholt Gewaehrleitung: 12 months Including: oil filling, user manual; ready to use

The fan speed is refurbished, can be offered as a complete unit.

Manufacturer: Busch Type: Mink MI 1502 BP Engine: 18.5 KW ; DS 400V Status: Used, partial performance: 6 months Volume flow: 500 m3/h compression pressure: +1.2 bar Accessory: additional suction filter (changed) ; Operating manual delivery time: approx. 1-2 Where.; ready for use

Rotary vane vacuum pump (roots blowers) Manufacturer: Pfeiffer Type: WKP 500 A Suction capacity: approx. 500 m ³/h Cat. No.: PP W31 001 Status: Rebuilt Warranty: 12 months Including: oil, manual; ready for operation

Rotary vane vacuum pump (roots blowers) Manufacturer: Pfeiffer Type: WKP 2000 A Suction capacity: 2065 m ³/h Engine: 5.5 KW Cat. No.: PP W61 000 Status: Rebuilt Warranty: 12 months Including: oil, manual; ready for operation

Manufacturer: Bush type: mink MI 1502 BP Motor: 18,5 KW; DS 400V status: used, without Warranty: 6 months Flow rate: 500 m ³/h discharge pressure: + 1,2 bar Accessories: additional intake filter (changed); Manual delivery time: approx. 1-2 where.; ready for operation

Block vane vacuum pump status: used, tested, working Manufacturer: Kinney Type: KT-300 D Engine: 400V Resources: Mineral oil Nominal: 25 m ³/h Discharge pressure: < 0.008 mbar (ABS.) Includes: user manual Oil (mineral oil) delivery: ex works; ready for operation

Rotary vane vacuum pump (roots blowers) Status: Rebuilt Manufacturer: Leybold Type: WA 251 Warranty: 12 months Accessories: manual; Spare parts list; Oil filling Delivery time: In stock

Key data: 300 , 4

Bandwidth - up to 460 mm Band thickness - 0,5-4 mm Motor drive - 6 kW together with Reel 1.5 T - non-powered

Rotary vane vacuum pump (roots blowers) Status: Rebuilt Manufacturer: Leybold Type: WA 501 Warranty: 12 months after delivery Accessories: owner's manual; Spare parts list; Oil filling Delivery time: In stock; ready for operation

The blower is refurbished and can be supplied as a complete unit.

Blowing machine Sidel Model SBO 18 Built in 2001 Power: 26,500 B/H Engine hours approx 44,000

The fan speed is refurbished, all wear parts are new, can be offered as a complete unit.

Centrifugal compressor in landfill gas use. Technical data sheet located as an attachment. The compressor is located in a very good condition, is until end of July 2018 in the operation and is very robust (casing). Pressure difference 180mbar and 15 kW drive motor. Radial blower used for landfill gas utilization. Technical specification see attached data sheet. The blower is in good technical condition and still in operation on a bio-gas plant in Germany untill end of July 2018. Pressure drop 180 mbar with 15kW electrical drive.

High pressure axial tube fan 1000mm 7.5 kW Nuaire SC1000LC4KGX-0JM6 several pieces for sale Air volume 32000m³/h at 420 Pa delivery head Several pieces for sale, high pressure duct fans, excellent for various cooling and ventilation applications. manufacturer: NUAIRE Type: SC1000LC4KGX-0JM6 year of manufacture: 2021. completely NEW! several pcs Technical data: glass fiber reinforced polyamide blades Adjustable blade angle diameter Ø 1000 mm Anodized aluminum motor motor power 7.5 kW / 400/50Hz/ 1460 rpm, 17.76 amp -50/+60ºC (Stop/Start) minimum operating temperature in standard version Anchored housing Plastic blades Dimensions external size 1106 mm / depth 570 mm including motor weight: 136kg

The fan is installed in a soundproofing hood completely, the stage is refurbished.

The fan speed is refurbished, can be supplied as a complete unit.

The fan speeds are reconditioned, can be supplied as a complete unit, performance data according to customer specifications.

The fan speeds are reconditioned, can be supplied as a complete unit.