pet blow mould used for sale

1 of used blow-moulder, make Krones, type Contiform S12, new 2006. With generic moulds for 2.0, 2.5 and 3.0 liter PET bottles with 1881 neck finish. Capacity 18.000 bph on 2.0 liter. With pre-form feeder and Gardner Denver Belliss Morcom high-pressure compressor type WH29H3N with air dryer and receiver. Operating hours approx. 40.000. In operation through August 2026. Also available from the same line: pneumatic conveyors, Krones rinser/filler/capper tribloc, Ocme Vega film-only shrinkwrapper, interconnecting bottle and pack conveyors.

Dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower, radial fan, ventilation blower, radial blower, blower -Fan: Radial fan, unfortunately without type designation -Voltage: 220/380 V -Speed: 2830 rpm -technical data: see photo type plate -Fan wheel: Ø 200 x 70 mm -Connection input: Ø 68 mm -Connection output: Ø 50 mm -Dimensions: 295/250/H320mm -Weight: 9.1 kg

Dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower, radial fan, ventilation blower, radial blower, blower -Manufacturer: Meidinger, blower radial fan with support frame -Engine power: 0.55 kW -Speed: 2850 rpm -Volume output: 42 m³/min -Protection class: IP 44 -Fan wheel: Ø 300 x 110 mm -Connection input: Ø 190 mm -Connection output: Ø 190 mm -Dimensions: 630/530/H560mm -Weight: 48 kg

Side channel compressor, side channel blower, ring blower, vacuum pump, blower -Manufacturer: Becker, side channel vacuum pump side channel compressor -Type: SKG 340-2V.02 -Drive: Dietz 3.0 kW 2870 rpm -Speed: 2850 rpm -Flow rate: 250 m³/h -Compression pressure: 240 mbar -Dimensions: Ø 480 x 560 mm -Weight: 67 kg/piece

Side channel compressor, side channel blower, ring blower, vacuum pump, blower, dry suction -Manufacturer: Dürr-Dental, side channel vacuum pump side channel compressor for dry suction -Type: 9000.102.09 -Drive: 220 V / 370 W -Connection input: Ø 32 mm -Connection output: Ø 32 mm -Dimensions: 310/260/H270 mm -Weight: 14.8 kg

Side channel compressor, side channel blower, ring blower, vacuum pump, blower -Manufacturer: Siemens, side channel blower side channel compressor with reversing valve -Type: Elmo-G 2BH6 000-0AC12 -Drive: 2.2 kW -Speed: 2860 rpm -Reversing valve: Wachenhausen GHDM7 -Dimensions total: 430/370/H380 mm -Weight: 38 kg

Dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower, radial fan, ventilation blower, radial blower, blower -Manufacturer: Karl Klein, blower radial fan type DNG 6-18 L -Engine power: 0.155 kW -Speed: 1400 rpm -Volume output: 18.5 m³/min -Fan wheel: Ø 160 x 80 mm -Connection input: Ø 145 mm -Connection output: 120 x 110 mm -Number: 3x blowers available -Price: per piece -Dimensions: 370/340/H320 mm -Weight: 8.1 kg/piece

Dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower, radial fan, ventilation blower, radial blower, blower, fan -Manufacturer: MA-VIB, fan blower radial fan type OS.120.201.4 -Engine power: kW -Speed: 2950 rpm -Volume output: /min -Fan wheel: Ø 120 x 30 mm -Connection input: Ø 135 mm -Connection output: 80 x 55 mm -Dimensions: 210/190/H200 mm -Weight: 3.1 kg

Dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower, radial fan, ventilation blower, radial blower, blower, fan -Manufacturer: Ziehl-Abegg, fan blower radial fan type MK085-4EK.10N -Engine power: 0.16 kW -Speed: 1330 rpm -Volume output: /min -Fan wheel: Ø 315 mm -Connection input: Ø 215 mm -Dimensions: Ø 315 x 180 mm -Weight: 6.7 kg

Dust extraction blower, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower, radial fan, ventilation blower, radial blower, blower, fan -Fan: Blower, radial fan -Engine: Katt type 806 419 0.25 kW -Speed: 2840 rpm -Volume output: /min -Fan wheel: Ø 175 x 130 mm -Inlet connection: Ø 125 mm -Air duct connection: Pipe connection 135 x 60 mm -Dimensions: 360/290/H265 mm -Weight: 9.3 kg

Dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower, radial fan, ventilation blower, radial blower, blower, fan -Fan: Radial fan -Motor: Besel type SKG71-2B 0.55 kW -Speed: 2810 rpm -Volume output: 18.5 m³/min -Fan wheel: Ø 170 x 50 mm -Connection input: Ø 85 mm -Connection output: 60 x 75 mm -Dimensions: 350/300/H260 mm -Weight: 11.5 kg

Dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower, radial fan, ventilation blower, radial blower, blower, fan -Fan: Radial fan -Type: unfortunately no type designation -Motor: 220/380 V -Fan wheel: Ø 120 x 50 mm -Connection input: Ø 130 mm -Connection output: 65 x 80 mm -Dimensions: 220/200/H210 mm -Weight: 3.5 kg

Dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower, radial fan, ventilation blower, radial blower, blower, fan -Fan: Radial fan -Type: unfortunately no type designation -Engine designation: 1994.12.26 BB61B698H VDO36SB -Total dimensions: Ø 287 x 135 mm -Weight: 4.6 kg

Dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower, radial fan, ventilation blower, radial blower, blower, fan -Fan: Radial fan Ø 340 mm -Type: unfortunately no type designation -Engine designation: SGV-35D-TF BB61B811H98 SEK 96.02.16 NSCE -Voltage: 220 V -Total dimensions: Ø 340 x 195 mm -Weight: 4.1 kg/pc.

Dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower, radial fan, ventilation blower, radial blower, blower, fan -Manufacturer: Haier, fan blower for air conditioning -Type: lKFD-35-1 -Voltage: 220 V / 35 W -Fan wheel: Ø 400 mm -Total dimensions: 400/190/H530 mm -Weight: 3.3 kg

Dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower, radial fan, ventilation blower, radial blower, blower, fan -Fan: blower for air conditioning -Type: lFW25K (YDK25-6) -Voltage: 220 V / 25 W -Fan wheel: Ø 400 mm -Total dimensions: 400/190/H530 mm -Weight: 3.2 kg

Dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower, radial fan, ventilation blower, radial blower, blower, fan -Fan: Blower for air conditioning -Type: l2HO2294D AMR075E1 -Voltage: 220-240 V -Fan wheel: Ø 350/215 mm -Total dimensions: Ø 350 x 370 mm -Weight: 5.0 kg

Radial fan, high-pressure radial fan, pressure blower, vacuum blower, ventilation blower, blower, radial blower, side channel blower -Manufacturer: Piller, radial fan double -Type: 2 E 10 1800 -Engine power: 11 kW / 2965 rpm -Volume flow: 0.27 m³/s -Connection input: Ø 62 mm -Connection: Ø 100 mm -Protection class: IP 44 -Dimensions: 1150/890/H1280 mm -Weight: 410 kg

Radial fan, high-pressure radial fan, pressure blower, vacuum blower, ventilation blower, blower, radial blower, side channel blower -Manufacturer: Piller, double radial fan. -Type: 2 M 10 1800 -Engine power: 15 kW / 2965 rpm -Volume flow: 0.27 m³/s -Connection input: Ø 160 mm -Connection: Ø 100 mm -Protection class: IP 44 -Dimensions: 900/1150/H1275 mm -Weight: 367 kg

Radial fan, high-pressure radial fan, pressure blower, vacuum blower, ventilation blower, blower, radial blower, side channel blower -Manufacturer: Piller, radial fan pressure blower -Type: R08 800 -Engine power: 5.5 kW / 2880 rpm -Volume flow: 12 m³/min -Connection input: Ø 140 mm -Connection output: Ø 75 mm -Protection class: -Dimensions: 1290/470/H1040 mm -Weight: 150 kg

Radial fan, high-pressure radial fan, pressure blower, vacuum blower, ventilation blower, blower, radial blower, side channel blower -Manufacturer: Reitz, Radialventilator -Type: MXE 100-010030-00 -Engine power: 22 kW / 3000 rpm -Volume flow: 100 m³/min -Pressure increase: 1000 daPa -Connection input: Ø 275 mm -Connection: Ø 220 mm -Dimensions: 870/1220/H1210 mm -Weight: 370 kg

Side channel compressor, side channel blower, ring blower, vacuum pump, blower, radial fan, pressure blower -Manufacturer: Elektror, pressure blower radial fan type HRD 2/4T -Drive: 2.6 kW -Speed: 2860 rpm -Volume flow: 17.0 m³/min -Connection input: Ø 150 mm -Connection output: Ø 150 mm -Protection class: IP 54 -Dimensions: 580/510/H515 mm -Weight: 38 kg

Side channel compressor, side channel blower, ring blower, vacuum pump, blower, radial fan, pressure blower -Manufacturer: Elektror, pressure blower radial fan type RD 92 -Drive: 15 kW -Speed: 2950 rpm -Volume flow rate: 7500 m³/h -Pressure: 8300 Pa -Inlet connection: Ø 220 mm -Outlet connection: Ø 220 mm -Protection class: IP 54 -Fan wheel: Ø 720 x 60 mm Quantity: 1 piece available -Dimensions: 960/910/H1075 mm -Weight: 210 kg

Side channel compressor, side channel blower, ring blower, vacuum pump, blower -Manufacturer: FPZ effepizeta, side channel blower side channel compressor -Type: SCL 70 SH -Drive shaft: Ø 35 x 90 mm -Bolt circle: Ø 160 x 10 mm -Drive motor: can be supplied at an additional cost -Dimensions total: 545/520/H565 mm -Weight: 37 kg

Radial fan, radial blower, radial fan, chip extraction blower, fan, extraction, chip blower, high-performance fan -Manufacturer: Krämer, Radial fan, chip extraction blower, fan type VFM-K -Volume flow rate: 4500 m³/h -Motor: AEG 4 kW 2870 rpm -Inlet connection: Ø 250 mm -Output connection: 235 x 210 mm -Fan wheel: Ø 400 x 160 mm -Overall dimensions: 705/610/H785 mm -Weight: 95 kg

Side channel compressor, side channel blower, ring blower, vacuum pump, blower -Manufacturer: Elektror, side channel blower side channel compressor -Type: SD-4N/S892 -Drive: 1.2 kW -Speed: 2800 rpm -Flow rate: 2.8 m³/min / 168 m³/h -Compression pressure: 180 mbar -Dimensions total: 450/360/H370 mm -Weight: 24.7 kg

Dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower, radial fan, ventilation blower, radial blower, blower, fan -Manufacturer: Karl Klein, blower radial fan -Type: DNG3-9.8/S WS L -Motor power: 0.07-0.16 kW -Speed: 2580 - 2810 rpm -Volume output: 445 -485 m³/h -Fan wheel: Ø 135 x 60 mm -Connection input: Ø 100 mm -Connection output: 80 x 65 mm -Quantity: 5 pieces available -Price: per piece -Dimensions: 430/200(H265 mm -Weight: 5.8 kg

Radial fan, dust extraction fan, fan, extraction, dust blower, blower, exhaust fan -Exhaust fan: heat-resistant -Dust extraction fan: radial fan -Motor: 7.5 kW 1465 rpm -Connection: Inlet Ø 600 mm -Connection: Outlet Ø 400 mm -Volume flow: m³/h -Dimensions: 1985/1570/H1780 mm -Weight: 442 kg

Radial fan, dust extraction fan, fan, extraction, dust blower, blower, exhaust fan, low-pressure radial fan, blower, pressure blower, side channel blower, side channel blower, ring blower, vacuum pump, blower, radial fan -Manufacturer: cimme, dust extraction fan radial fan type CBJ G06330 E4 RD -Engine: 9.2 kW 2925 rpm -Volume flow: 35/63 m³/min -Connection: Inlet Ø 250 mm -Connection: Outlet Ø 250 mm -Fan wheel: Ø 660 x 70 mm -Protection class: IP55 -Dimensions: 1090/780/H1330 mm -Weight: 245 kg

Side channel compressor, side channel blower, ring blower, vacuum pump, blower -Manufacturer: DEGA, side channel blower/side channel compressor with filter -Type: 2XHB510H26 -Drive: 1.6 kW -Speed: 2850 rpm -Flow rate: m³/h -Compaction pressure: 200 mbar -Overall dimensions: 570/800/H830 mm -Weight: 57 kg

Dust extraction blower, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower, radial fan, ventilation blower, radial blower, blower, fan -Fan: Blower radial fan, double version without drive -Fan wheel: 2x Ø 400 x 380 mm -Axle length: approx. 1230 mm -Motor power: designed for 0.55 to 7.5 kW -Drive shaft: Ø 30 mm, V-belt pulley 2-groove Ø 235 mm see photos -Number: 2x blowers available Price: per piece -Dimensions: 1470/600/H690 mm -Weight: 65 kg/unit

Dust extraction blower, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower, radial fan, ventilation blower, radial blower, blower, fan -Fan: Radial fan blower, without drive -Type: Fan wheel Ø 265 x 35 mm -Drive shaft: V-belt pulley Ø 75 mm, see photos -Inlet connection: Ø 95 mm -Outlet connection: Ø 95 mm -Dimensions: 355/200/H490 mm -Weight: 7 kg

Dust extraction blower, exhaust gas extraction, welding fume extraction, extraction, fan, pressure blower, vacuum blower, radial fan, ventilation blower, radial blower, blower, fan -Fan: Blower radial fan, double version without drive -Fan wheel: 2x Ø 400 x 380 mm -Drive shaft: Ø 30 mm, V-belt pulley 2-groove Ø 231 mm see photos -Outlet: 470 x 275 mm -Dimensions: 1400/660/H615 mm -Weight: 47 kg

Rotary lobe compressor, rotary lobe blower, rotary piston pump, Roots pump, compressor, vacuum pump, pressure blower, pressure compressor -Manufacturer: Shandong Huadong Blower Co., Ltd. -Brand: XinHuadong -Model: HDSR2608 -Pressure increase: 90 kPa -Main shaft speed: 1150 rpm -Blower No.: 20062006621 -Engine power: 90KW -Flow rate: 41 m³/min -Date of manufacture: June 22, 2020 -Production number: 2006-128 -Dimensions: 1170/1820/H1460 mm -Weight: 1440 kg

radial fan, dust extraction blower, fan, extraction, dust blower, blower, exhaust fan -Exhaust exhaust fan: heat-resistant -Dust extraction fan: radial fan -Engine: 90 kW 1480 rpm -Connection: Inlet Ø 390 mm -Connection: Output Ø 390 mm -Fan wheel: Ø 1220 mm (drawing in the pictures) -Volume flow rate: m³/h -Dimensions: 2610/2030/H2080 mm -Weight: 1950 kg

Blower/fan Buehler design GR 360 degrees 240 m³/min, 210 mm water column Power 11 kw V-belt drive Output 455 x 355 mm Suction 450 mm Good condition, test run in our specialist workshop

Souffleuse KAUTEX H10-3 S80 2D/3D Diamètre vis : 140 mm ?Machine retrofitée en 2005

Fan / blower from ABB Solyvent-Ventec design 90 degrees m³/min 367 mm Water column 800 Power kw 75 Suction diameter 550 mm Output 480 x 360 mm Good condition, test run carried out

Older, but powerful MIAG fan type GL360° 106 m³ /min 730 mm water column 22 kw V-belt drive Suction ø 329 mm In: Transition ø 400 mm with air flap From: 280 x 210 mm Transition ø 400 mm Maintenance and test run carried out in our specialist workshop

Fan / blower CARTER Howden design Gr360° m³/min 250 mm WS 160 Fan wheel ø 550 x140 mm 11 kw V-belt drive, n= 2400 rpm, , From 500 x 440 mm

Bottle blowing machine from Sidel type SB 012 ROUE. Capacity up to 15,000 bottles/h. Year of manufacture 2001.

The blow moulding stations are new and have never been used.

material width: 0300 mm material thickness: 2,50 mm no. of straightening rolls: 11 feed rolls: 2 exit pinch rolls: 2 diam. of the rolls ca.: 60 mm straightening speed: 5 - 30 mm/min sheet thickness - min.: 0,40 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Features: • All upper rollers manually adjustable • All lower rollers interconnected via gears • Speed manually adjustable via handwheel • Strip guide at the infeed • Roller basket at the outfeed • Sensor arm for loop control The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, extraction blower, radial fan, ventilation fan, radial blower, blower, fan -Manufacturer: Nicotra, fan, blower, radial fan -Type: 12/9 DD -Motor: Aertenica 1.5 kW 1360 rpm -Fan wheel: Ø 235 x 240 mm -Inlet connection: Ø 260 mm -Output connection: 300 x 215 mm -Dimensions: 520/490/H400 mm -Weight: 25 kg

Dust extraction fan, exhaust gas extraction, welding fume extraction, extraction, fan, extraction blower, radial fan, ventilation fan, radial blower, blower, fan -Manufacturer: Aertenica Nicotra, fan, blower, radial fan -Type: 12/9 DD -Motor: 1.5 kW 1360 rpm -Fan wheel: Ø 225 x 240 mm -Inlet connection: Ø 260 mm -Output connection: 300 x 200 mm -Dimensions: 520/490/H400 mm -Weight: 25 kg

Rotary Lobe Blower High Vacuum Blower Unused Manufacturer: Aerzener Maschinenfabrik GmbH Type: GLB 17.14 Year: 1977 Volume flow: 100 m³/min P1: 1.0 atü (bar) P2: 0.5 atm (bar) ΔH: 5 mWS (0.5 bar) at 100 kW and 890 rpm Dimensions approx. 1500 x 1000 x 1100 mm Areas of application: central dust extraction, vacuum coating, packaging industry, chemical processes, steel degassing Changes and errors in the technical data, specifications and prices as well as prior sale reserved.

Krones Contiform S 12 with 12 cavities Capacity: approx. 18.000 bottles/hour on 2,0 litre bottles Year of manufacturing: 2006 Operating hours: only approx. 38.000 hours Including Gardner Denver Belliss & Morcom compressor WH29H3N with dryer and air receiver Bottle neck finish: 1881 The machine is currently still in production and will run until August 2026 Dismantling and removal must take place at the beginning of September 2026 Location: United Kingdom

Speed: 8.000 bph with 0,5 liter bottle. Different formats are possible optionaly. Dismanteling is made by Seegräber GmbH on begining februar 2018. List of machines included: -SIDEL SBO 6 Blowing machine. Completly overhault by SIDEL in 2006. -Preform magazin and preform elevator Compressor, cooling, moulds not included

Blowing machine Kosme KSB 4000 year of manufacturing: 2003 capacity: 4.700 bph incl. preform feeding system neck type: PCO 1810 The machine is out of production since October 2025 and it is already dismantled:

material width: 1650 mm material thickness: 3,00 mm no. of straightening rolls: 21 Control: sheet thickness - min.: 0,50 mm diam. of the rolls ca.: 50 mm between stands ca.: 1720 mm run-in height: 1250 mm total power requirement: 45 kW weight of the machine ca.: 24,50 t dimensions of the machine ca.: m 6-HIGH LEVELER / Strip Leveler / with Quick-Change System - 18 Back-up Supports - Digital Roll Adjustment (0.01 mm resolution) - Gearbox renewed in 2021 - Quick-Change System The quick-change system is mounted on a sliding plate. This sliding plate—on which the leveling rolls as well as the entire back-up support assembly are mounted—can be extended, allowing for quick and easy roll replacement in an easily accessible position. The extension and retraction of the sliding plate are hydraulically actuated. Connection to the drive mechanism is automatic. - Intermediate Rolls The intermed ...