pet blow molding used for sale

material width: 100 mm material thickness: 15 mm no. of straightening rolls: 9 straightening feed: 7 m/min total power requirement: 0,75 kW weight of the machine ca.: 380 kg dimensions of the machine ca.: 710 x 920 x 1360 mm Features: - 5x driven lower rollers - 4x adjustable upper rollers - Max. cross-section approx. 800 mm² - Mobile use on casters - Operating instructions The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

radial fan, dust extraction blower, fan, extraction, dust blower -Manufacturer: TEKA, radial fan in soundproof container -Motor: 22 kW -Speed: 1460 rpm -Volume flow rate: 20,000 m³/h -Pressure: 3,000 Pa -Fan wheel: Ø 720 mm -Inlet connection: Ø 500 mm -Outlet connection: Ø 500 mm -Dimensions: 2150/1770/H2300 mm -Weight: 1051 kg

Overview This SIPA SFR 8 is an 8-cavity rotary stretch-blow moulding machine for PET bottles, built in 2009 by SIPA (Italy). It processes PET preforms into bottles of 0.5 l, 0.75 l and 1.5 l at an output of up to 12,400 bottles per hour. The blowing station is fully enclosed by safety guarding with viewing windows, and the machine is operated from a machine-mounted touchscreen control panel. It has been running as the stretch-blow moulder of a PET bottling line for mineral water and soft drinks, and is still installed and under power, so it can be inspected in production. Technical data Manufacturer: SIPA (Italy) Model: SFR 8 Year of manufacture: 2009 Machine type: rotary stretch-blow moulder for PET bottles Number of cavities: 8 Output: up to 12,400 bottles/hour Bottle formats: 0.5 l, 0.75 l and 1.5 l Neck finish: 28 mm / 1881 (short neck) Electrical connection: 400 V, three-phase Total ...

Set including various electrical equipment and accessories including an AL-KO Hurricane blower, an Einhell RG-DP 4525 submersible pump, a mobile electrical distribution box, cables, fasteners, components and various technical supplies. This set is an interesting solution for maintenance, DIY, reuse, recovery of parts or additional equipment. Sold in a single lot with all the elements visible in the photographs. Auction-ID: A1-48554-256

Voltage: 230V/50Hz Power: 3000W Rotation speed: 14000 rpm Air speed: 275 km/h Maximum efficiency: 12.5 m³/min Collection bag: 45 L Auction-ID: A7-49495-293

Voltage: 230V/50Hz Power: 3000W Rotation speed: 14000 rpm Air speed: 275 km/h Maximum efficiency: 12.5 m³/min Collection bag: 45 L Auction-ID: A7-49495-193

Voltage: 230V/50Hz Power: 3000W Rotation speed: 14000 rpm Air speed: 275 km/h Maximum efficiency: 12.5 m³/min Collection bag: 45 L Auction-ID: A7-49495-93

TAWI blower model SA350/Z Motor 3 kw 2900 rpm 50 hz 220 v Transportation Information Length 750 mm Width 500 mm Height 600 mm No documentation In your state

Single-station machine for containers up to max 8 ltr. Extruder S 90. Single head with viewing strips. Other accessories, such as conveyor belts

radial fan, dust extraction blower, fan, extraction, dust blower, blower -Manufacturer: Airheat, radial fan with soundproof housing -Type: RDH-500-11.0 -Volume flow rate: 20000 m³/h -Motor: Hoyer 15 kW 1460 rpm -Dimensions: see technical drawing in the photos -Overall dimensions: 1800/1110/H2900 mm -Weight: 584 kg

Equipped with 11kW fan. Auction-ID: A1-49552-131

Fluid: P-Glycol. Volume 34 dm3. Maximum working pressure: 15 bar. Working temperatures: +50/0 degrees. Auction-ID: A1-49552-32

Unused. Capacity: 36 m3/min. TechTop Electric Motor 75kW. Rpm 2960/min. P = 1000-1800 Bar. Connection diameter: 150mm. With accessories and documentation. Auction-ID: A1-49552-91

Fluid: P-Glycol. Volume 34 dm3. Maximum working pressure: 15 bar. Working temperatures: +50/0 degrees. Auction-ID: A1-49552-31

For sale is a highly automated BBM 2500 CoEx3 extrusion blow molding line, built in 2019. The plant is in very good technical condition, is fully functional and immediately available. A tour under power is possible by appointment. The plant is designed for the cost-effective production of large-volume HDPE hollow bodies and sophisticated technical blow molded parts. It is a discontinuous 3-layer extrusion blow molding line with a storage head. Included in the total scope offered: - Piovan GMS-160 high-performance plastic granulator, built in 2023 - Piovan VM 500 extraction system - GWK/Technotrans refrigeration system The listed peripheral components are included in the offer price. If individual components or all accessories are not required, they can be removed from the scope of delivery and taken into account accordingly in the pricing. Main technical data:  ...

Powerplus Electric leaf blower POWEG4030 - 3300 W Electric leaf blower - maximum air speed 250 km/h - garden tool Auction-ID: A1-40897-58

This machine is delivered without battery and charger. The Makita UB002GZ01 is the ultimate addition to your tool arsenal when vacuuming is just not enough. This powerful 40V Max XGT cordless leaf blower offers three settings – high, mid and low – so you can always choose the right blowing power, from coarse dirt to fine dust particles. Thanks to the ergonomic design, you can work comfortably in an upright posture, without straining your back. The rubber discharge nozzle prevents electrical conduction and thus contributes to extra safety at the workplace. In addition, you can also use this blower as a vacuum cleaner with an optional dust bag, which makes it even more versatile. With a runtime of up to 192 minutes on the lowest setting (when using a 4.0 Ah battery), this tool is ideal for long-term, efficient cleaning without interruptions. (body) Auction-ID: A1-40897-1052

This machine is delivered without battery and charger. The Makita UB002GZ01 is the ultimate addition to your tool arsenal when vacuuming is just not enough. This powerful 40V Max XGT cordless leaf blower offers three settings – high, mid and low – so you can always choose the right blowing power, from coarse dirt to fine dust particles. Thanks to the ergonomic design, you can work comfortably in an upright posture, without straining your back. The rubber discharge nozzle prevents electrical conduction and thus contributes to extra safety at the workplace. In addition, you can also use this blower as a vacuum cleaner with an optional dust bag, which makes it even more versatile. With a runtime of up to 192 minutes on the lowest setting (when using a 4.0 Ah battery), this tool is ideal for long-term, efficient cleaning without interruptions. (body) Auction-ID: A1-40897-1015

This machine is delivered without battery and charger. The Makita UB002GZ01 is the ultimate addition to your tool arsenal when vacuuming is just not enough. This powerful 40V Max XGT cordless leaf blower offers three settings – high, mid and low – so you can always choose the right blowing power, from coarse dirt to fine dust particles. Thanks to the ergonomic design, you can work comfortably in an upright posture, without straining your back. The rubber discharge nozzle prevents electrical conduction and thus contributes to extra safety at the workplace. In addition, you can also use this blower as a vacuum cleaner with an optional dust bag, which makes it even more versatile. With a runtime of up to 192 minutes on the lowest setting (when using a 4.0 Ah battery), this tool is ideal for long-term, efficient cleaning without interruptions. (body) Auction-ID: A1-40897-1053

material width: 1500 mm material thickness: 3,00 mm no. of straightening rolls: 23 between stands ca.: 1530 mm thickness min. approx.: 0,50 mm diam. of the rolls ca.: 47 mm straight. speed ca.: 0-18 m/ min barrel length ca.: 1560 mm run-in height: 1150 mm total power requirement: 23 kW weight of the machine ca.: 9,00 t dimensions of the machine ca.: 4,30 x 1,80 x 2,60 m Specifications: - Max. vertical roll gap: 20 mm (Note: scale only goes up to 15 mm) - Lower support assembly: 5-point configuration with support rollers (individually adjustable) - Upper support assembly: 5-point configuration with support rollers - Bottom roll crowning - Circulating lubrication system for gearbox and drive shafts - Infeed table and outside table included - Reversible operation - Centralized grease lubrication for leveling roll bearings - MITSUBISHI ELECTRIC frequency converter (Type A800) - 22 kW drive m ...

This machine is delivered without battery and charger. The Makita UB002GZ01 is the ultimate addition to your tool arsenal when vacuuming is just not enough. This powerful 40V Max XGT cordless leaf blower offers three settings – high, mid and low – so you can always choose the right blowing power, from coarse dirt to fine dust particles. Thanks to the ergonomic design, you can work comfortably in an upright posture, without straining your back. The rubber discharge nozzle prevents electrical conduction and thus contributes to extra safety at the workplace. In addition, you can also use this blower as a vacuum cleaner with an optional dust bag, which makes it even more versatile. With a runtime of up to 192 minutes on the lowest setting (when using a 4.0 Ah battery), this tool is ideal for long-term, efficient cleaning without interruptions. (body) Auction-ID: A1-40897-1051

Votex Whirlwind 750-M Year of construction 2011 Sourced from weedtrac Machine has been put away in working order, no longer tested Auction-ID: A1-47389-348

mileage: km, track width: 1720mm, equipped with: Leitwolf Snow blower (4400mm), front slide (folds out to 5300mm), front linkage, rear linkage, 3-person cab, automatic track tensioner, hydraulic functions on rear, MAN D2876 LE 103 6-cylinder turbo diesel engine, digital display, (hour reading not readable, staggered to 0, estimated hour reading: 6000), Auction-ID: A1-47389-57

Votex Whirlwind 760E Year of construction 2007 Sourced from weedtrac Machine is working, any videos available! Auction-ID: A1-47389-347

KWH Whirlwind 760 leaf blower – 1998 – Honda GX240 8 hp – lot 301 Specifications: Brand: KWH Type: Whirlwind 760 Year of construction: 1998 Serial Number: 7042 Engine: Honda GX240 Fuel: Petrol Engine type: 1-cylinder 4-stroke Displacement: approx. 242 cm³ Power: 8.0 hp / approx. 5.9 kW Cooling: air-cooled Ignition: electronic Starting system: manual start / pull starter Fan: centrifugal fan Air capacity: approx. 70–75 m³/min (approx. 4,200–4,500 m³/h) Fan housing: steel Version: hand-guided Own weight: approx. 72 kg Dimensions: approx. 151 × 70 × 92 cm (L × W × H) Features: Honda GX240 petrol engine Centrifugal fan Steel fan housing Low-set discharge opening Long handle with controls at your fingertips 2 pneumatic tires Particularities: Used condition with signs of wear and age. Paint damage and localized superficial corrosion pres ...

With QCC330 charging station and 2x 36V Li-ion batteries. Auction-ID: A1-49793-1014

With QC330 charging station and 2x 36V Li-ion batteries. Auction-ID: A1-49793-55

Holmes HR32 Blower Positive displacement air blower, HR32, with Brook Crompton 45Kw motor, RPM 1470, all mounted on frame, 3Ph

Auction-ID: A1-49968-45

Voltage: 230V/50Hz Power: 3000W Rotation speed: 14000 rpm Air speed: 275 km/h Maximum efficiency: 12.5 m³/min Collection bag: 45 L Auction-ID: A7-50066-193

Voltage: 230V/50Hz Power: 3000W Rotation speed: 14000 rpm Air speed: 275 km/h Maximum efficiency: 12.5 m³/min Collection bag: 45 L Auction-ID: A7-50066-93

Voltage: 230V/50Hz Power: 3000W Rotation speed: 14000 rpm Air speed: 275 km/h Maximum efficiency: 12.5 m³/min Collection bag: 45 L Auction-ID: A7-50065-193

Voltage: 230V/50Hz Power: 3000W Rotation speed: 14000 rpm Air speed: 275 km/h Maximum efficiency: 12.5 m³/min Collection bag: 45 L Auction-ID: A7-50065-93

Voltage: 230V/50Hz Power: 3000W Rotation speed: 14000 rpm Air speed: 275 km/h Maximum efficiency: 12.5 m³/min Collection bag: 45 L Auction-ID: A7-50065-293

Voltage: 230V/50Hz Power: 3000W Rotation speed: 14000 rpm Air speed: 275 km/h Maximum efficiency: 12.5 m³/min Collection bag: 45 L Auction-ID: A7-50066-293

Suitable for wool-like blowing materials Auction-ID: A1-47363-55

Used injection molding machine, Manufacturer of Husky Injection Systems Ltd. Type: GL225RS60/50 Year of constr.: 23.04.1998 400 V, 96 A greatest engine, 42 A total load heating Functional The machine can be visited like us. Price: 8.000,00 plus VAT, from stock Sale even after parts possible

Used injection molding machine with Siemens controller, Manufacturer of Husky Data plate: Load supply no. 1 400V 207 A, 50 Hz, 3 p + N + PE system Biggest motor 110 A Total load heating 90 A Short circuit intermittent performance 35 kA Load supply Nr 2 Type of machine: LX225 RS60/50 Relay individually on request. The machine can be visited like after consultation with us.

Ersatzteile für Spritzgießmaschinen Arburg, Demag, Krauss Maffei, Battenfeld, Ferromatik, Boy, Engel Die Teile sind 100 % original und funktionsfähig und vor allem deutlich günstiger als Neuteile Proportionalventile: Proportionalventil, Bosch No. B810026625 Proportionalventil, Bosch No. B811101179 Proportionalventil, Bosch No. B811301059 Proportionalventil, Bosch Nr. B811301099, Staudruckventil Proportionalventil, Moog Nr. D662Z2768D Type F02HX3MGNEA2 + Moog Nr. D061-7000D Type J15H08MEVAR Proportionalventil, Moog Nr. D662Z2768D Type F02HX8MGNEA2 + Moog Nr. D061-7000D Proportionalventil, Moog Nr. D662Z4704 Type D02HXBM5NEA2-M + Moog Nr. D061-9330 Type J15K0BM4HM1 Proportionalventil, Rexroth Nr. 4WRPE10W80SJ-2X/G24K0/B5M (Bosch Nr. 0811404776) Proportionalventil, Rexroth Nr. 5WRSE10F1B60-34/G24K0/B5V Proportionalventil, SN. 106374, Bosch No. 0811404057 Proportionalven ...

Ersatzteile für Spritzgießmaschinen Arburg, Demag, Krauss Maffei, Battenfeld, Ferromatik, Boy, Engel Die Teile sind 100 % original und funktionsfähig und vor allem deutlich günstiger als Neuteile Wegeventile Rexroth 3/2 4/2 5/2 Rexroth Valves 3/2 4/2 5/2 Rexroth SN. 177897 No. RSE25BV6T2WX3/S Rexroth No. 3WE6B4-52/BG24NK4 Rexroth No. 3WE6B4-62/EG24N9K4 Rexroth No. 3WE6B61/EG24N9K4 Rexroth Nr. 3WE6B73-62/EG24N9K4 Rexroth No. 5-3WE10A33/CG24N9K4 Rexroth Nr. 5-3WE10B32=CG24N9K4 Rexroth No. 5-3WE10B33/CG24N9K4 Rexroth SN. 141289 No. 3WE6B73-61/EG24N9K4 Rexroth SN. 141574 No. 3WE6B62/EG24N9K4 Rexroth No. 3WE6A4-62/EG24N9K4 Rexroth No. 3WE6B9-62/EG24N9K4 Rexroth No. 4WE10D50/EG24N9K4 Rexroth No. 4WE6D6-62/EG24N9K4 Rexroth No. 4WE6D62/EG24N9K4 Rexroth No. 4WE6E67-62/EG24N9K4 Rexroth No. 4WE6E67A62/EG24N9K4 Rexroth Nr. 4WE6G11A62/EG24N9K4 Rexroth No. 4WE6Y2-62/EG1 ...

Ersatzteile für Spritzgießmaschinen Arburg, Demag, Krauss Maffei, Battenfeld, Ferromatik, Boy, Engel Die Teile sind 100 % original und funktionsfähig und vor allem deutlich günstiger als Neuteile Proportionalventile Bosch Proportional Bosch Bosch proportional valves Bosch No. B810026625 Bosch No. B811101179 Bosch No. B811301059 Bosch No. B811301099 Bosch SN. 106374 No. 0811404057 Bosch SN. 196385 No. 0811402201 Bosch SN. 29796 Bosch No. 0811300053 Bosch SN. 29796, Bosch No. 0811403018 Bosch SN. 29796 Bosch No. B811301002 Bosch SN. 29798 No. 0811402012 Bosch SN. 64252 No. 0811402102 Bosch SN. 64253 No. 0811404040 Bosch SN. 134687 No. 0811402169 Bosch SN. 106374 No. 0811404900 Bosch SN. 106374 No. B810006097 Bosch SN. 117724 No. 0811402114 Bosch SN. 117766 No. 0811402163 Rexroth No. ZDREE10VP3X-1X/250YG24-K0B5M Bosch SN. 117766 No. 0811402163 Bosch SN. 11776 ...

Complete control CC 90 for ENGEL injection moulding machines

Ersatzteile für Spritzgießmaschinen Arburg, Demag, Krauss Maffei, Battenfeld, Ferromatik, Boy, Engel Die Teile sind 100 % original und funktionsfähig und vor allem deutlich günstiger als Neuteile Proportionalventile Rexroth Proportional Rexroth Rexroth proportional valves Rexroth No. ZDREE10VP3X-1X/250YG24-K0B5M Rexroth No. ZDREE10VP3X-1X/250YG24-K0B5M Rexroth No. 4WRPE10W80SJ-2X/G24K0/B5M Bosch No. 0811404776 Rexroth No. 5WRSE10F1B60-34/G24K0/B5V Rexroth SN. 106374 No. 4WRP10KB130P-2X 0811404900 Rexroth SN. 117724 Rexroth Nr. 5WRPE10F1B70L-2X/G24K0/B5M Bosch Nr. 0811402114 Rexroth SN. 134686 No. 0811402167 Rexroth SN. 134687 No. ZDBEBE10VT1X-10/80G24K0B5M Bosch No. 0811402169 Rexroth SN. 29796 No. 4WRP10EA32S-10/G24Z4/M-796 Bosch No. 0811403018 Rexroth SN. 29796 No. 4WRP10EA32S-1X/G24Z4/M-796 Bosch No. 0811403018 Rexroth SN. 29796 No. 4WRP10EAA32S-1X/G24Z4/M-796 B ...

Ersatzteile für Spritzgießmaschinen Arburg, Demag, Krauss Maffei, Battenfeld, Ferromatik, Boy, Engel Die Teile sind 100 % original und funktionsfähig und vor allem deutlich günstiger als Neuteile Wegaufnehmer für Spritzgießmaschinen Position sensors for injection molding machines Scales Position Sensors for Injection Molding Machines Novotechnik LWH 100 100 mm Novotechnik LWH 127 127 mm Novotechnik LWH 130 130 mm Novotechnik LWH 150 150 mm Novotechnik LWH 151 151 mm Novotechnik LWH 225 225 mm Novotechnik LWH 300 300 mm Novotechnik LWH 353 353 mm Novotechnik LWH 360 360 mm Novotechnik LWH 450 450 mm Novotechnik LWH 452 452 mm Novotechnik LWH 500 500 mm Novotechnik LWH 500 500 mm Novotechnik LWH 503 503 mm Novotechnik LWH 600 600 mm Novotechnik LWH 75 75 mm Novotechnik LWH 900 900 mm Novotechnik TL 225 225 mm Novote ...

various spare parts incl.

Ersatzteile für Spritzgießmaschinen Krauss Maffei Die Teile sind 100 % original und funktionsfähig und vor allem deutlich günstiger als Neuteile Krauss Maffei Ersatzteile Elektronik Elektronikkarten Module Ferromatik B&R PC 900 KXNO168510 B&R 5AP953.1043-K01 Ferromatik B&R 2003 DM465 7DM465.7 Ferromatik B&R 2005 3BP150.4 Ferromatik B&R 2005 AI375 3AI375.6 Ferromatik B&R 2005 AM050 3AM050.6 Ferromatik B&R 2005 AO350 3AO350.6 Ferromatik B&R 2005 AO350 3AO350.6 Ferromatik B&R 2005 DI450 3DI450.60-9 Ferromatik B&R 2005 DI450 3DI450.60-9 Ferromatik B&R 2005 DI475 3DI475.6 Ferromatik B&R 2005 DI476 3DI476.6 Ferromatik B&R 2005 DI486 3DI486.6 Ferromatik B&R 2005 DM476 3DM476.6 Ferromatik B&R 2005 DM476 3DM476.6 Ferromatik B&R 2005 DM476 3DM476.6 Ferromatik B&R 2005 DM486 3D ...

many moldes available for Husky Glines and Hypets Husky Moog Servo Valve HPN 4952777 Compatible with Later Hypet & Hylectric injection molding machines, Hypets 4.0 & 5.0, Used in working order 6 Months Warranty (1) Piece available