pet blow molding used for sale

Lock cylinders, carriage cylinders, WDS cylinders, holding arms for punching tools, screw S 30/24D, and much more

Vibratory Spiral Conveyor / Sorting Device / Spiral Conveyor / Vibratory Conveyor WEBERVibratory Bowl, Sorting Device / Screw Feeder with Vibratory Conveyor for Screwdriving TechnologyFeeding System, Feeding DeviceType: ZEM 360Masch.- No.: 1113557 Year of Construction: 2004Pot Diameter Top: 360 mmPot Diameter Bottom: 250 mmPot Inner Height: approx. 110 mmSorting Lane Width: approx. 20 mmFilling Weight: approx. 12 kgFilling Quantity: approx. 3 LitresControl Voltage: 24 Volts DC (external power supply is required)Mains connection: 230 Volts, 50 Hz. Operating pressure: 6 bar control unit

Vibratory Spiral Conveyor / Sorting Device / Spiral Conveyor / Vibratory Conveyor RNA Vibrating Bowl, Sorting Device / Screw Feeder with Vibratory Conveyor for Screwing TechnologyFeeding System, Feeding DeviceManufacturer: RNA Rhein-Nadel Automation GmbHTyp: SRC-N 250-2LSer.- No: 03613 Year of Construction: approx. 2000Pot Diameter Bottom: 250 mmPot Diameter Top: 380 mmPot Inner Height: approx. 70 mmSorting Lane Width: 30 mmTotal Height (Drive + Pot with Sorting Path): 390 mmOscillation Frequency: 100 Hz / 6000 min-1Power supply: 230 volts, 50 Hz control unit

Vibratory Spiral Conveyor / Sorting Device / Spiral Conveyor / Vibratory Conveyor RNA Shaking Bowl, Sorting Device / Screw Feeder with Vibratory Conveyor for Screwing TechnologyFeeding System, Feeding DeviceManufacturer: RNA Rhein-Nadel Automation GmbHTtype: SRC-N 250-2LSer.- No: 03609 Year of Construction: approx. 2000Pot Diameter Bottom: 300 mmPot Diameter Top: 350 mmPot Inner Height: approx. 25 mmSorting Track Width: approx. 30 mmTotal Height (Drive + Pot with Sorting Track): 380 mmOscillation Frequency: 100 Hz / 6000 min-1Power supply: 230 volts, 50 Hz

Vibratory Spiral Conveyor / Sorting Device / Spiral Conveyor / Vibratory Conveyor RNAVibrating Bowl, Sorting Device / Screw Feeder with Vibratory Conveyor for Screwdriving TechnologyFeeding System, Feeding DeviceManufacturer: RNA Rhein-Nadel Automation GmbHType SRC-B200-2RBeauguration: approx. 2000Pot diameter top: 300 mmPot diameter bottom: 180 mmPot inner height: approx. 45 mmSorting lane width: approx. 5 mmTotal height (drive + pot with sorting track): 260 mmPower supply: 230 volts, 50 Hz.- RNA control device, type ESG 90 for Adjustable

A complete 5-layer coextrusion blown film line with 5 extruders and all peripheral equipment is available. Total line dimensions X/Y/Z: 14m/22m/11m, blow head: Kiefel Worms FSBK 500 with IBC, die diameter: 500mm, film width range: 700mm-2000mm, haul-off width: 2000mm, winding width: 2000mm, line speed: 120m/min, melting capacity: 500kg/h, total power requirement: approx. 300kW. 1) Double winder Wintech, winding width: 2000mm, film thickness range: 35µm-150µm, max. roll diameter: 1000mm, max. roll weight: 1900kg, core inner diameter: 152mm/6inch. 2) Extruder Kiefel Worms 70.29D, power: 89kW, screw: 5-zone barrier screw, speed: 125rpm, renewed: 2010. 3) Adhesive extruder Kiefel Worms 50.25D, power: 34kW, screw: 3-zone barrier screw, speed: 200rpm. 4) Center extruder Kiefel Worms 50.25D, power: 34kW, screw: 3-zone core progressive screw, speed: 175rpm. 5) Adhesion promoting extruder Kiefe ...

The rotary lobe blower has been completely overhauled. All our refurbished blowers are equipped with new bearings and sealing elements. If you have any questions, please feel free to call.

A SIG Corpoplast blow molding machine is available. Output: 21600 bottles/h, bottle formats: 500ml/750ml/1000ml/1500ml, max. blowing air pressure: 40bar, dimensions X/Y/Z: approx. 7000mm/4300mm/3100mm, weight: approx. 20000kg. Including preform feeder Transver AG, year of construction: 2008, silo, elevator, sorting and chute. Documentation available. On-site inspection is possible.

Key data: 60 mm, 25

Blown Film Extrusion Line: Manufacturer: Reifenhäuser / Troisdorf Type: S 100.060 Connection: 220 / 380 Volt Total connected load: approx. 100 amps Film thickness range: 30 - 80 microns max. winding width: 1200 mm Material: LDPE Extruder: Type: S60 Power: 7 to 28 kw Screw diameter: 60mm Screw length: 25D Max. output capacity: 50 kg/h Drive: Elektra Faurndau GmbH Granulate feed via vacuum conveyor Die head: rotating Type: BSR 100 - 250 mm Die insert: 150 mm and 200 mm diameter Heating capacity: 11.2 kW Cooling ring: Cooling ring inserts: 150mm and 200mm diameter Air volume control, lip adjustment Flattening and pull off device: Adjustable side boards for foil flattening Side gusset insertion device Pull-off rollers Winder: 2 digits - tandem wrapper manual winding shaft insertion device Winding System: Tangential Winder pneumatic roller lifter Max ...

Bekum BA 52 Blow Moulding Machine Stations: Single Clamping Force: 450 kN Control: Original Bekum Extruder: S 701 Head: 6 Litre Accumulator-Head new Max. Bottle volume: 60 Litres Mold Dimensions (Length/Width/Depth):1200/750/2150-300 (mm)

For sale is an Aerzen GM 4 S rotary lobe blower. Can be purchased as a complete unit or separately as shown in the pictures. Year of Make: 2004 Condition: Blower overhauled - all wear parts renewed, immediately ready for use The blower has been professionally overhauled and is in perfect technical condition.

For sale is an Aerzen GMA 10.2 rotary lobe blower. Can also be used as a replacement for a GM 7 L. Year of Make: 2000 Condition: Refurbished - all wear parts renewed, immediately ready for use The blower has been professionally overhauled and is in perfect technical condition.

For sale is an Aerzen GMA 11.3 rotary lobe blower. Can also be used as a replacement for a GM 10 S. Year of Make: 1990 Condition: Refurbished - all wear parts renewed, immediately ready for use The blower has been professionally overhauled and is in perfect technical condition.

For sale is an Aerzen GMA 11.3 rotary lobe blower. Can also be used as a replacement for a GM 10 S. Year of Make: 1990 Condition: Refurbished - all wear parts renewed, immediately ready for use The blower has been professionally overhauled and is in perfect technical condition.

TECOM BLOWN FILM EXTRUDER, for LDPE-RLDPE blends, Contrex feeding, 2 gravimetric components + 1 volumetric dosing units, Screw diam.70 mm 30 L/D, Rotating head, Low neck, 1.600 mm pull off unit, gusseting unit, Cason corona treatment, single color printer (for marks), 1.600 mm double collection frame, BRA 36+ Eurochiller, working width: 1600, availability: February 2026

TECOM BLOWN FILM EXTRUDER, for LDPE -BIO - RLDPE, Contrex feeding, 2 gravimetric + 1 volumetric components, screw diam. 65 mm.30 L/D, Rotating head, Low neck, pull off unit, gusseting units, Cason corona treatment, single color printing unit (for marks), 1.100 mm. double collection frame, BRA 25+ Eurochiller, working width: 1.100 mm., availability: February 2026, PRESENT CONDITIONS: running and testable

Venti Oelde High Performance Centrifugal Fan Manufacturer: Venti Oelde Type: HRV 45-224 / R GL 360 Type: High Performance Centrifugal Fan V: 2559 m³/h 12 bar t: 300 C P: 0.608 kg/m³ Pw: 0.9 kW NV: 2840 1/min Weight: 180 kg Year of Make: 2017 More items - new and used - can be found in our shop! International shipping costs on request!

PET Blow Moulding Machine - MAG PLASTIC The ideal blowing solution for PET bottles Year : 1994 Type : SSB 40 Input voltage : three-phase 400 V Frequency : 50 or 60 Hz ± 5% Total installed power : 86 kW (Option 102 kW) Weight: Approximately 5000 kg Number of molds: 4 Clamping force : 250 KN Total opening stroke : 120 mm

Stretch blow moulding machine from EtekISBM Line = Injection stretch blow moulding Stretch blow moulding machine for disposable PET bottles made from PET preform blanksStretch blow moulding machine for production in rotary transfer processManufacturer: ETEK / GF-Industries Type Supra 800 sv 1Serial number: 22000225Year of construction: 2012Power: 90 kWNet connection: 400 volts, 50 HzNet weight approx. 6000 kgas good as new; used

MACHINE À INJECTION - SOUFFLAGE PROCREA TYPE Rev 300 Cette machine d’injection soufflage PROCREA REV 300 peut produire des récipients à corps creux complètement finis, sans déchets comme moulés en injection avec différentes matières plastiques, avec des cycles complètement automatique, capacité de 50 cc. à 15 litres et poids de 20 gr. à 700 gr. Cette machine est prédisposée pour fonctionner avec des moules de 1 à 8 empreintes et la production est très élevée grâce au système à revolver qui accomplit toutes les opérations d'injection, soufflage et éjection de la pièce finie dans un seul stade. La construction des moules pour la Rev 300 est très simple grâce au système automatique d'extraction appliqué au revolver.

1 piece new, S 80/24D, for PUR 1 piece little used, S 80/24D, with maddock and mixed part

overhauled in 2012 and equipped with a new Beckhoff control system with touchscreen. Extruder S 50/22D for HDPE single head with Moog servo valve and WDS. Steffes lekstester is there. Very good condition. Available from stock immediately, subject to prior sale

Extruder S 45/22D. Single head, machine can also be equipped with double or triple head. With external leak tester. Very good condition

Extruder S 36/22D. Double head, can also be supplied with single or triple head. Good condition

Extruder S 50/22D, Doppelkopf 100 Stich. Machine can also be equipped with single or triple head. Good condition

Extruder S 45/22D. Double head 70mm stitch, machine can be equipped with single head. Good condition

Extruder S 55/22D. Single head with WDR. With Beckhoff control and touch screen. Very good condition

A 13-layer blown film line Kuhne for the production of biaxially oriented high-barrier films is available. Film thickness range: 20µm-80µm, max. film width: 1400mm, max. output capacity: 400kg/h, extruders: 13 units, max. die head pressure: 500bar, flex ring die: 250mm/300mm, calibration tools: 200mm/225mm/250mm/280mm/300mm, yield: 80%-90%. Laminating films: sealing layer thickness: 25µm-35µm, printing layer thickness: 25µm-45µm. Monofilms: shrink lid thickness: 23µm-28µm, AF lid film thickness: 25µm-45µm, top and bottom film thickness: 75µm, balloon film thickness: 25µm-31µm. Documentation available. An on-site inspection is possible.

HESTA HK 453 Year of manufacture 2002 - completely overhauled in 2021 Extruder 45 mm, 22 D Control Beckhoff New quill head, a new wall thickness control and new hybrid pump Denison The machine has been in operation for less than 50 hours since the overhaul in 2021, and in almost mint condition.

Manufacturer: Aerzener Model: GM60S Year of Manufacture: 2017 Type of Machine : Positive Displacement Blower Suction Pressure (max., abs.): 1.013 bar Discharge Pressure (max., abs.): 2.013 bar Nominal Motor Power: 132.00 kW Unit Weight: 2548 kg Certifications: CE, EAC Find more here - / Contact us at -

Manufacturer: Aerzener Model: GM7L Year of Manufacture: 2019 Type of Machine : Positive Displacement Blower Max. Suction Pressure (abs): 1.013 bar Max. Discharge Pressure (abs): 1.413 bar Nominal Motor Power: 7.50 kW Unit Weight: 294 kg Find more here - / Contact us at -

Used Revised Sipa Rotary Blow Molding Machine 2008: A Comprehensive Overview Are you in the market for a reliable blow molding machine? Look no further than the used Sipa Rotary Blow Molding Machine 2008. In this article, we will delve into the details of this machine, exploring its features, specifications, and benefits. Whether you are a seasoned professional or just starting in the industry, this article will provide you with valuable insights into the Sipa SFR8. 1. Introduction Blow molding machines play a crucial role in the production of various plastic containers. The Sipa Rotary Blow Molding Machine 2008, also known as the SFR8, is a popular choice in the industry. It offers efficiency, precision, and versatility, making it an excellent investment for manufacturers. Let's explore its features in detail. 2. Overview of the Sipa Rotary Blow Molding Machine 2008 The Sipa Ro ...

Industrial axial fan 800mm diameter ZIEHL-ABEGG fn80-sdi.6n.v7 NEW! Sold in a box of several pieces manufacturer: ZIEHLL-ABEGG type: FN080-SDI.6N.V7 Axial fan with sickle-shaped aluminum blades Diameter: 800mm Ø airflow: 10000-21000m3/h nominal airflow: 15800m3/h at 140pa air pressure motor power: 1.15kw/0.53kw Nominal values 3. phase~400V D/Y 50Hz 1.55/0.95kW 3.3/1.7A rpm:850/650/min Protection type:IP54 sound level:70 dB COSY 0.69 max temperature range:80°C Motor protection: thermal contact Protective grid type: mesh grid Dimensions (w x h x d) mm: 861 x 861 x 273

Item : 3Hp Class H Air KNife Blower Motor Quantity: 4 Units Centrifugal Fan FCV 105 CW 90 3HP 2Pole 3Phase 64cmm(max), 60mmag(max) Motor : H series Impeller body material : Cast Iron Casing body material : Cast Aluminium c/w :- - Base height adjustable Project: F40 Air Knife System PIC: Ainaa +60 17-303 9528 Nurin +60 17-577 3739 FULL ADDRESS F40: Lot 67330, Off Jalan Meru, Batu 5 1/2, 41050, Mukim Kapar, Daerah Klang, Selangor

Blowing machine Krones Contiform 308 year of manufacturing: 2015 capacity: 18.000 bph neck size: PCO 28 - 1881 only 20.000 working hours with preform feeding system and chiller immediately available in Germany

SIDEL SBO10- blowing machine, SBO10 is intended to manufacture PET bottles. Its production rate can be up to 10.000 bottles per hourdepending on the capacity., As first step, the operator puts the preform bin, via trans pallet or forklift, in the hoisting and tipping unit (SAMETO brand) and the preforms inserts in the hopper., After that, the elevator transfers the preforms to the horizontal elevator, the unscrambler and the final gravity guide (infeed rails).The below schematic diagram describes the general process of SBO10 machine:, which consists of:, 1. Preform infeed rails, 2. Preform infeed wheel, 3. Infrared oven, 4. Preform transfer wheel, 5. Blow wheel, 6. Bottle transfer wheel, 7. Bottle evacuation, GENERAL Presentation, 1. Infeed of cold preforms, Cold preforms are inserted by an inclined ramp. They are hung by the neck and are guided by two rails between which they are lowere ...

Material type: LDPE, LLDPE, mLLDPE, HDPE, PP, regranulates Machine dimensions (LxWxH): 16 X 5 X 10.5 m Min/Max final Film width: 900 / 1700 mm Film thickness: 27–200 μm Capacity: Up to 240 kg/h Line speed: 0–150 m/min Screw diameter: 55/65/55 Layer ratio: Up to 25/50/25 % L/D ratio: 30/1 Number of heating zones: 3 for 55 mm and 4 for 65 mm (1 zone per screen) Dosing system: Doteco Grado; 3 units with 4 components each; centralized vacuum pump (added later); all scales fully serviced last year; new software and external touch screen; neck (before extruder) with additional magnets Electronics: Siemens, ABB Software: Macchi's; full control via touch screen (replaced 3–4 years ago) Die head with IBC: 280 mm; 2.4 mm gap (3 heating zones); TE502 model with air ring extension Internal cooling balloon diameter control (IBC) Ultrasonic sensor (1 unit); JET  ...

Subject to prior sale - errors possible! Internal reference number: D-1143-7

Overview The BLOMAX 4 blow molder was manufactured by the German company SIG Corpoplast (now KHS) in 2006. It has been overhauled by a machine builder and can be inspected in dry operation. Blow molds are not included, but can be obtained.  Technical details  Output: up to 7,200 bph 4 cavities Dimensions: 4960 mm x 3900 mm x 3000 mm  Weight: 15 t  Operating hours: 44.736  Bottles Volume: 200 ml - 2000 ml   Max. Diameter: 115 mm  Max. Length: 350 mm Preforms  Length: 60 - 200 mm Max. Support ring diameter: 35 mm  Scope of delivery  Blow molder is completely equipped with the system for preform feeding (silo, elevator, sorting, chute)

Container Size With Actual Configuration: 1 l // Number Of Heads: 1

Neck: PCO 1881 // Output: 12000 U/h

Neck: 1881 // Output: 25000 U/h

Neck: PCO1881 // Output: 27000 U/h

Neck: PCO1880, 1881 // Output: 24000 U/h

Accumulation Head Capacity : 4 l // Number Of Heads: 1

Container Size With Actual Configuration: 2 l // Number Of Heads: 8

Container Size With Actual Configuration: 2 l // Number Of Heads: 5

Accumulation Head Capacity : 1,8 l // Number Of Heads: 1

Neuweriger Doppelkopf make W. Müller. With WDS and filter