perske d used for sale

Bezel moving, moving bezel, steady rest, Lynette -max. passage: Ø 170 mm -Support: ball bearing -Tip height: 345 mm -Hole spacing: 550 mm -Hole diameter: Ø 21 mm -Drawings: in the photos -Quantity: 1 piece available -Dimensions: 605/80/H670 mm -Weight: 59 kg

Bezel, steady rest, lynette -max. passage: Ø 190 mm -Tip height: 390 mm -Support: ball bearing rollers -technical drawing: in the photos -Quantity: 1 piece available -Dimensions: 600/140/H800mm -Weight: 79 kg

Bezel, stick, lynette -Transfer in current condition as seen -Max. Passage: Ø 260 mm -Tip height: 370 mm -without: quills -Technical drawing: in the photos -Dimensions: 680/135/H830 mm -Weight: 92 kg

Bezel, stick, lynette -Max. Passage: Ø 212 mm -Tip height: 319 mm -Edition: gray cast iron -Technical drawing: in the photos -Dimensions: 610/120/H650 mm -Weight: 59 kg

Moving steady rest, moving steady rest, steady rest, lynette -Max. Passage: Ø 74 mm -Edition: gunmetal -Tip height: 185 mm -Drawings: with the photos -Price: per piece -Number: 1x available -Dimensions: 370/75/H385 mm -Weight: 11.1 kg

Inv. Num. : 7386 Type: Dimension Elite Producer: Eden Praine Created: 2015 Parameters: Weight: 128 kg Equipment: Cartridges with print cartridges

Electric motor, three-phase motor -Volt: 415 V. -Power: 0.063/0.4 kW -Speed: 460/2840 rpm -Shaft: Ø 17 x 35 mm -Construction: B14 -Protection class: IP 65 -Price: per piece -Number: 3x available -Dimensions: 395/210/H190 mm -Weight: 7 kg

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 100 mm -Piston diameter: 40 mm -Piston rod: 14 mm -Connection piston rod: M12x1.75 -End position cushioning: adjustable on both sides -Number: 1x available -Price: per piece -Dimensions: 45/H310 mm -Weight: 1.2 kg

Round cylinder, pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 80 mm -Piston: Ø 40 mm -Piston rod: Ø 16 mm -Total length: 305 mm -Total length extended: 385 mm -End position cushioning: adjustable on both sides -Dimensions: 52/H305 mm -Weight: 2.75 kg

Inv. Num. : 1607 Type: CB90VZB SL 6600 Producer: DYNOBEND B.V. Created: 2011 Parameters: 3 CNC-controlled axes Programmable speed Network Connection Windows Novell and Linux Software for work preparation Standard Specifications: Bending angle max: 200° Adjustment accuracy: 1/10° Tube torsion: 360° Booster power: 70kN Software IGES Centerline without marking Pipe length max. 6.3m Tube pre- and post-carriage 300mm Max. tube diameter 90mm Crushed tubes twisted 100 x 12 x 1 5 Min. radius over rolling process with or without mandrel > 1000mm Smallest radius with fixed tool not running and not torsional > 1 5D Repeat accuracy of machine 0.1mm 3-D bends

Inv. Num. : 1609 Type: CB90VZB SL 6000 Producer: DYNOBEND B.V. Created: 2013 Parameters: Control system: IGES Maximum tube diameter: 100 mm Maximum bending angle: 200 h Precise bending: 1/10 st Number of axles: 3 pieces Maximum bending length: 6300 mm Tube rotation: 360 pcs Strength: 70 kN Repeatability: 0.1 mm Programmable speed Compatible with systems: Windows. Novell and Linux Process Planning Software 3D bends Tools for bending pipes with a diameter of 76 and 70 mm

Bezel moving, moving bezel, steady rest, lynette -Max. Passage: Ø 175 mm -Condition: Gunmetal -Center height: 310 mm -Drawings with the photos -Number: 1 piece available -Dimensions: 590/70/H540 mm -Weight: 36kg

Winding motor, drum winder for crane, trailing cable motor, gear motor, electric motor -Speed: 22.5 rpm -Performance: TA = 120 Ncm -Shaft: Ø 30 x 105 mm -Protection class: IP 54 -Number: 1x available -Price: per piece -Dimensions: 350/290/H195 mm -Weight: 22 kg

Used 250 L dough mixer by Diosna type W 402 A with three tanks. The machine has one speed.

We sell a refurbished Diosna SP120D spiral mixer.

Used Thermal Oil Ovens DAUB - 2 ThermoRoll trolley ovens for trolleys 60x80cm - 1 deck oven thermal oil - incl. boiler More information on request. Ask us for dismantling and assembly including commissioning.

Pneumatic cylinder, flat cylinder, pneumatic drive, stamp -Stroke: 50 mm -Piston: Ø 40 mm -Piston rod: Ø 16 mm -Pneumatic damping: adjustable on both sides -Dimensions: 38/61/H210 mm -Weight: 1.05 kg

Winding motor, drum winder for crane, trailing cable motor, gear motor, electric motor -Performance: TA 2.0 Nm -Speed: 500 rpm -Shaft: Ø 24 mm -Construction: B3 -Number: 1x available -Price: per piece -Dimensions: 285/235/H176 mm -Weight: 16.5 kg

Key data: 3200 , 60

Screw diameter: 60 mm Injectable volume: Injection Pressure: Passage between columns: 735 x 735 Mould thickness: min: 330mm- max: 680 Opening stroke: 660 mm Number Of Cores :2 Robot interface: E67

Round cylinder, pneumatic cylinder, standard cylinder, air cylinder, pneumatic stamp, air stamp -Stroke: 300 mm -Piston: Ø 40 mm -Piston rod: Ø 16 mm -Total length: 522 mm -Total length extended: 822 mm -End position cushioning: adjustable on both sides -Dimensions: 70/64/H522 mm -Weight: 4.65 kg

Key data: 13000 , 4200 , 110

Screw diameter; 110 mm Injectable volume: 4370 cm3 Injection pressure: 1815 bar Column width: 1500 x 1200 mm Mould thickness min: 700 mm max: 1400 mm Opening stroke: 1500 mm Cores: 4 Robot Interface: Yes Options: Retractable column

Pneumatic cylinder, air cylinder, standard cylinder -Stroke: 80 mm -Piston: Ø 80 mm -Piston rod: Ø 25 mm -Price: per piece -Number: 3 pieces -Dimensions: 94/94/H350 mm -Weight: 5 kg

Amplifier unit, amplifier -Type: DT110-U15-A-C2 -Series: multiNCDT -Dimensions: 65/170/H40 mm -Weight: 0.38 kg

Key data: 5500

Screw diameter; H3500 - 85 mm / H2000- 65 mm Injectable volume: H3500 - 946 cm3 / H2000- 511 cm3 Injection pressure: H3500 - 1509 bar / H2000-2228 bar Column width: 930 x 930 mm Minimum mould thickness: 300 mm max: 1000 mm Opening stroke: 1100 mm Cores: 4 Robot Interface: Yes Options: Automatic clamping 24 heated zones

Key data: 2000

Nozzle spacing: 100 mm Screw diameter: H260: 38 H470: 45 mm Injectable volume:H260: 168 H470: 278 cm3 Injection Pressure: H260: 1564 H470: 1659 Column width: 610 x 610 mm Mould thickness: 280-760 mm Opening stroke: 560 mm Cores:: 2 Robot Interface: Yes Possibility of a GROSFILLEY swivel base

Used glass lined reactor with capacity 100 L. Manufacturer DeDietrich. Year of manufacturing 1986. Technical parameters: 1. Working pressure: - tank -1/6 - jacket -1/6 2. Working temperature: - tank -25/+250 - jacket -25/+250 3. Capacity: - 105 L tank - jacket 24 L

Dynomill Multilab Bead mill 2006, 3.3Kw, tabletop bead mill, ideal for wet ultrafine grinding and dispersion, 3Ph

Switching power supply, control, modem, power supply -Type: SNT 25 -Dimensions: 97/100/H36 mm -Weight: 0.35 kg

Guide cylinder, guide pneumatic cylinder, pneumatic cylinder, compact cylinder -Type: DFM-63-80-B-PPV-A-GF -Piston: Ø 63 mm -Stroke: 80 mm -pneumatic: cushioning -both sides: adjustable -Gliding guide -Weight: 7.34 kg

Used spiral mixer DIOSNA / OASE, type: SPK 15 -in very good condition- - Use only in vocational school - for 15 kg of dough - Technical condition: very good - Machine inspected and cleaned, ready for immediate use -El. Connection: 380 V, 50 Hz, 6 A 1.1/2.2 kW - Boiler speed: 710 and 1,425 rpm Viewing and test run are possible by arrangement.

Three-phase motor, electric motor -Power: 1.5 kW -Speed: 920 rpm -Shaft: Ø 24 x 50 mm -Construction: B34 -Flange: Ø 160 mm -Number: 3 motors available -Price: per piece -Dimensions: 350/246/H205 mm -Weight: 31 kg

three-phase motor, electric motor -Power: 1.5 kW -Speed: 900 rpm -Shaft: Ø 28 x 60 mm -Design: B14 -Flange: Ø 160 mm -Protection class: IP 54 -Dimensions: 330/255/H190 mm -Weight: 25 kg

New Part Number: 0206 5542 ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!

Three-phase motor, electric motor -Power: 1.6 kW -Speed: 930 rpm -Shaft: Ø 22x70 mm -Construction: B3 -Protection class: - -Price: per piece -Number: 2x available -Dimensions: 400/320/H260 mm -Weight each: 47 kg

Three-phase motor, electric motor -Power: 1.1 kW -Speed: 1420 rpm -Shaft: Ø 24 mm -Construction: B3 -Protection class: IP 33 -Dimensions: 300/235/H181 mm -Weight: 16 kg

New Part Number: 0291 6480 not reversible ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!

x-travel: 885 mm y-travel: 600 mm z-travel: 600 mm control: iTNC 530 Heidenhain Main spindle:: Max. rpm: 1 - 28.000 min/-1 power capacity - main spindel: 35 / 25 kW max. Torque: 119 / 85 Nm tool taper: HSK A63 Swivel range milling spindle: B: -10° / +110° ° spindle bearing diameter: 80 mm rotary table:: table diameter: 750 mm rotation range: C: 360 ° rotary speed: max. 100 min/-1 max. table load: 600 kg feeds:: feed speeds: 1 - 90.000 mm/min rapid traverse: 90 m/min Feed force: X/Y: 13,8 kN Feed force: Z: 10,35 kN tool magazin:: number of toolpositions: 30 pos. max. tool diameter: 80 mm max. tool-dia with free toolbox: 140 mm max. tool length: 300 mm max. tool weight: 10 kg Workpiece dimension: max. workpiece height: 460 mm Max. Workpiece Area: ca. 750 x 600 mm passage: max. 600 mm total power requirement: 60 kVA weight of the machine ca.: 12 t dimensions of the machine ca.: 4,5 ...

Three-phase motor, electric motor -Power: 1.1/1.6 kW -Speed: 1400/2800 rpm -Shaft: Ø 25 mm -Construction: B3 -Protection class: - -Dimensions: 350/290/H260 mm -Weight: 42 kg

Electric motor, three-phase motor -Power: 0.15/0.22 kW -Speed: 690/1400 rpm -Shaft: Ø 18 mm -Wave length: 50 mm -Construction: B3 -Protection class: - -Dimensions: 295/225/H180 mm -Weight: 17 kg

Catalog No. : 7418 Type: Concept 420/810-2300 Producer: Demag Made in: 2006 Characteristic: Clamping force: 420 t Closing force: 4200 kN Screw diameter: 70 mm Injection capacity: 891 cm³ Injection weight: 800 g Height of the plate for mounting the mold: 1200 mm Width of the plate for mounting the mold: 1100 mm Distance between the columns (horizontal): 800 mm Distance between the columns (vertical): 710 mm Maximum injection pressure: 1877 bar Mold height: 820 mm Machine length: 7800 mm Machine width: 2200 mm Machine height: 2400 mm Weight of the injection molding machine: 20000 kg

Three-phase motor, electric motor -Power: 1.5 kW -Speed: 1410 rpm -Shaft: Ø 25 mm -Construction: B5 -Protection class: - -Dimensions: 355/265/H250 mm -Weight: 28 kg

electric motor, three-phase motor -Power: 0.18 kW -Speed: 2800 rpm -Shaft: Ø 14 mm -Design: 14 -Protection class: IP 54 -Quantity: 1 available -Dimensions: 245/163/H155 mm -Weight: 5 kg

X-axis: 2500 mm Y-axis: 920 mm Z-axis: 820 mm Work table: 3100 x 900 mm Spindle Exception: SK/ISO40 Spindle speeds: 20 - 18,000 rpm. Tool changer: 30 pcs. Control: Heidenhain iTNC 530 Equipped with: -Conveyor - Cooling by spindle 40 bar - ISO40 tools -Operating instructions Country of origin: Germany Motor power: 35 KW Machine LxWxH: 6000 x 3800 x 2950 mm (transport dimensions) Machine weight: 25.000 kg

Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws: with plastic insert -Span width: 0 to 10 mm -Load capacity: 500 kg -Number: 2x terminals available -Price: per piece -Weight: 6 kg/piece

Three-phase motor, electric motor -Power: 0.25 kW -Speed: 1380 rpm -Shaft: Ø 14 mm -Design: B5 -Protection class: IP 44 -Dimensions: 295/205/H160 mm -Weight: 11 kg

Three-phase motor, electric motor -Power: 3 kW -Speed: 940 rpm -Shaft: Ø 35 mm -Design: B3 -Protection rating: - -Dimensions: 440/350/H300 mm -Weight: 60 kg

90 m pallet rack Jungheinrich Heavy Duty New, very good condition, see pictures Height 5 m Depth 110 cm Beam length 3.7 m Load/compartment 3800 kg Load 18000 kg Frame blue Carrier white Year of construction 2023 Negotiation price: € 15.490,-- net from stock Offer consists of: + 25 pcs. frame pre-assembled, new, depth 110 cm, height 5 m + 144 pcs. carriers, used goods, length 3.7 m, 3800 kg ballast/compartment + 288 pcs. Suspension locks + 100 concrete anchors Load plates Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. Further information on request. More than 5000 linear metres of pallet racks from numerous manufacturers are always in stock. (Subject to changes and errors in the technical data, specifications and prices as well as prior sale! See our terms and conditions, all price ...

Three-phase motor, electric motor -Power: 3 kW -Speed: 950 rpm -Shaft: Ø 28 mm -Design: B3 -Dimensions: 445/317/H260 mm -Weight: 60 kg

Ransomes - Parts // also Agria Iseki Jacobsen SABO Shibaura Toro Used parts and components available from stock for: 213 D, 350 D, Commander 3510, Fairway 405, MK IV, MK 11, Rider J74: mowing spindles, hydraulic components, engines, axles, wheel drives, hydrostats, hydraulic pumps, wheels and tires, steering parts, steering orbit rollers, etc. Other miscellaneous parts of Agria 9300, Jacobsen HR5111; 1471, Gutbrod 2850DA, Iseki div., Hako 1800-2750, John-Deere div., Sabo 1203; 1500; 1502D; RS84 Senior, Shibaura SP1840; CM364, Toro Pro81 etc. ... Complete spindle units and 3-fold cylinder mowers Bucher, Loipfinger, Jacobsen as well as Ransomes and SABO Info and offers on request. No sending of package deals or lists.

Inv. Num. : 7446 Type: DYNAMIC FC 3000 CNC Producer: SAHOS Created: 2011 Parameters: Control system: HEIDENHAIN Spindle drive power: 18 kW X-axis travel: 3000 mm Y-axis travel: 1500 mm Z-axis travel: 1070 mm