129,249 used machines on RESALE, but how to find them? Machine Search
Double Mitre Saw Manufacturer: Duespohl Model: DGK 400 B Built: 2000 Cutting width: 100mm Cutting height: 100mm Saw aggregates Swivel: -45° - + 45°
Machine grinds in linear pass, Extremely robust design. Specifications: Workspace: Largest sanding width 150 mm Highest working height for new grinding tool (workpiece passage) 50 mm Diameter of the grinding wheels 600 mm Speed upper grinding wheel 765 rpm Lower grinding wheel 765 rpm Circumferential speed: upper grinding wheel 24 m/s Lower grinding wheel 24 m/s Dimensions of the abrasive tools: Ø 600 x 75 x Ø 50 mm Workpiece feed speed infinitely adjustable from 35 to 350 mm/s Grinding wheel infeed: Total travel per grinding wheel 150 mm Grinding wheel feed servo motor controlled Dressing Unit: Servo Motor Controlled Grinding motors: 30KW Ges. Power requirement approx. 62KW Dimensions of the machine: Length approx. 2750 mm Width approx. 2050 mm Height: approx. 3000 mm Footprint: Length: approx. 4350 mm Width: approx. 5020 mm Weight: 6500 kg The m ...
AFT Single shot depositor Stainless height adjustable frame, 25Kg hopper, fill range 25g - 100g, mobile, 1Ph
AFT Single shot depositor Mini depositor Serial: 101001-01 2010, Stainless height adjustable frame, 25Kg hopper, fill range 10g - 100g, mobile, 1Ph
Engine is completely Overhölt with all schleißteile new running bushes piston valves uzw uzw
Reference number 20127 Brand Gearbox TWIN DISC Model Gearbox MG 514 C Ratio 5,16:1 Power 380 HP RPM 1800 RPM General condition USED RUNNING CONDITION Status AVAILABLE SPECIFIC INFORMATION Sae housing SAE 1 Flexible coupling YES Controls MECHANICAL SPECIFIC FEATURES Brackets NO Oil cooler NO
The "floor" of the dryer cooler consists of a nationwide, often special ventilation hopper system with downstream forced discharge. Depending on the customer application and products, this hopper system is additionally created with anumable fixtures. The roof-shaped design prevents the products from flowing freely. The filling and emptying of the cooler can be carried out continuously, fully automatically or in set / circulation. The standard cooler dimensions are 3x3 m and up to 18 meters high, depending on the number of superstructures, depending on the customer's requirements. for maize, cereals, rice, granules and other free-flowing products
EiMa double cross-cut saw DKS 123 and accessories, built in 2010, very good condition (has been regularly serviced). New price at that time - approx. € 55,000.00 saw, € 15,000.00 accessories Specifications: Manufacturer: EiMa Maschinenbau GmbH, Frickenhausen Type: GKS 123 Type of current: 230/ 400V / 50 Hz Operating voltage: 400 V Control voltage: DC 24V Machine power: 23 kW Rated current: 44 A Dimensions approx. Length: 6.40 meters Width: 5.37 meters Height: 1.10 meters Weight: 2.2 tons The accessories consist of the photos, various replacement profile cutter heads (partly from Leitz-Variform and as good as new in original packaging) etc. The double deflection saw is currently still at our customer in Gerolstein and was taken out of service on 23.10.2024 - due to a restructuring. Only the offered machine and accessories are expressly sold, any things th ...
; Power [PS]: 54; Gross weight [kg]: 889; Engine: Caterpillar C3.3; Accessories: Tanker, Battery, Control Panel, Stahldach, Caterpillar DE50GC Generator Set specifically designed for stand-by duty.; Water Tank Volume [l]: 103
Key data: 32 KW, 40 kVA, 400 V
Net price: 12.500,- € Gross price: €14,875.- - - - - - John Deere Emergency Power Generator Set 40 kVA - NEW + + with 400 litre large tank + + - - - - - Engine: - John Deere - Model: D3029 -Diesel - 1500 rpm - - - - - Generator: - Manufacturer: Leroy & Somer (France) - 40 / 44 kVA - 230 / 400 volts - 50 Hertz - AVR regulator - - - - - Control / Start Unit: - Digital ComAp Start Unit - Manual start at the touch of a button - Automatic start function - Generator monitoring: volts, amps, hertz, kW - Engine monitoring - Hour meter - Maintenance timer - - - - - Other data: - Dimensions: 210 x 87 cm - Weight: approx. 1120 kg - Tank volume: 400 litres large tank - - - - - Other: - An integrated socket package can be ordered for an extra charge - This is expected to include: 1x 400V 16A, 1x 400V 32A, 1x 400V 63A + RCD - - - - - ...
Key data: 48 KW, 60 kVA, 400 V
John Deere Emergency Power Generator Set 60 kVA - NEW + + with 600 litre large tank + + - - - - - Engine: - John Deere - Model: D3029 -Diesel - 1500 rpm - - - - - Generator: - Manufacturer: Leroy & Somer (France) - 60 / 66 kVA - 230 / 400 volts - 50 Hertz - AVR regulator - - - - - Control / Start Unit: - Digital ComAp Start Unit - Manual start at the touch of a button - Automatic start function - Generator monitoring: volts, amps, hertz, kW - Engine monitoring - Hour meter - Maintenance timer - - - - - Other data: - Dimensions: 250 x 100 cm - Weight: approx. 1300 kg - Tank volume: 600 litres large tank - - - - - Other: - An integrated socket package can be ordered for an extra charge - This is expected to include: 1x 400V 16A, 1x 400V 32A, 1x 400V 63A + RCD - - - - - Scope of delivery: - John Deere generator set 60 kVA - In a so ...
Key data: 80 KW, 100 kVA, 400 V
Net price: 25.200,- € Gross price: €29,988.- - - - - - John Deere Emergency Power Generator Set 100 kVA - NEW + + with 600 litre large tank + + - - - - - Engine: - John Deere - Model: D4045 -Diesel - 1500 rpm - - - - - Generator: - Manufacturer: Leroy & Somer (France) - 100 / 110 kVA - 230 / 400 volts - 50 Hertz - AVR regulator - - - - - Control / Start Unit: - Digital ComAp Start Unit - Manual start at the touch of a button - Automatic start function - Generator monitoring: volts, amps, hertz, kW - Engine monitoring - Hour meter - Maintenance timer - - - - - Other data: - Dimensions: 285 x 100 cm - Weight: approx. 1660 kg - Tank volume: 600 litres large tank - - - - - Other: - An integrated socket package can be ordered for an extra charge - This is expected to include: 1x 400V 32A, 1x 400V 63A + 1x 400V 125A + RCD - - - ...
Key data: 120 KW, 150 kVA, 400 V
Net price: 22.800,- € Gross price: €27,132.- - - - - - John Deere Emergency Power Generator Set 150 / 165 kVA - NEW + + with 950 litre large tank + + - - - - - Engine: - John Deere - Model: D6068 -Diesel - 1500 rpm - - - - - Generator: - Manufacturer: Leroy & Somer (France) - 150 / 165 kVA - 230 / 400 volts - 50 Hertz - AVR regulator - - - - - Control / Start Unit: - Digital ComAp Start Unit - Manual start at the touch of a button - Automatic start function - Generator monitoring: volts, amps, hertz, kW - Engine monitoring - Hour meter - Maintenance timer - - - - - Other data: - Dimensions: 330 x 110 cm - Weight: approx. 2060 kg - Tank volume: 950 litres large tank - - - - - Other: - An integrated socket package can be ordered for an extra charge - This is expected to include: 1x 400V 32A, 1x 400V 63A + 1x 400V 125A + RCD ...
Key data: 160 KW, 200 kVA, 400 V
Net price: 25.200,- € Gross price: €29,988.- - - - - - John Deere Emergency Power Generator Set 180 / 200 kVA - NEW + + with 950 litre large tank + + - - - - - Engine: - John Deere - Model: D6068 -Diesel - 1500 rpm - - - - - Generator: - Manufacturer: Leroy & Somer (France) - 180 / 200 kVA - 230 / 400 volts - 50 Hertz - AVR regulator - - - - - Control / Start Unit: - Digital ComAp Start Unit - Manual start at the touch of a button - Automatic start function - Generator monitoring: volts, amps, hertz, kW - Engine monitoring - Hour meter - Maintenance timer - - - - - Other data: - Dimensions: 330 x 110 cm - Weight: approx. 2140 kg - Tank volume: 950 litres large tank - - - - - Other: - An integrated socket package can be ordered for an extra charge - This is expected to include: 1x 400V 32A, 1x 400V 63A + 1x 400V 125A + RCD ...
Properties: + Semi-automatic + very good value for money + already as standard: mobile machine, optimal for quick ground wiping + Stainless steel partial knife + coated knife head + even division of the dough + excellent round inges, the dough pieces + ergonomic knife cleaning position (head swivelable 90 degrees forward) + easy and fast adjustment of the chamber height + side bracket for actuator, immediately at hand SERIES equipment: + 3 impact plates included SPECIAL accessories, available at an extra cost: - additional impact plates for DivObun Size 4-30: EUR 93,-- net / Pcs Technical data: Pieces: 30 dough pieces Unit weight: 40 - 120 grams (dough/ product dependent) Dough insert: 1,200 - 3,600 grams (dough/ product dependent) Power: 0.75 kW Connection values: 400V - 3Ph - 50Hz Fuse: 16A-CEE plug Dimensions: 60 x 70 x 152 cm (WxDxH) Height with lever: 2 ...
New machine 24-month warranty Benefits: + TOP value for money + robust hydraulic dough divider with rectangular stainless steel boiler frame + mobile machine + teflon-coated cutting & punching grille, easy to replace + food-safe plastic press segments + Stainless steel knife for splitting pieces of dough up to max. 19 kg dough insert, 20-piece division) + Artisan, traditional sharing and moulding of the dough possible + Punching grille: profiled POM plastic knife, food-safe, for excellent side closure of the dough + ideal for very soft doughs (baguettes, ciabatta, focaccia, root breads, corntip) + smooth and dust-proof motor + easy and quick to clean + fast spare parts supply within 1-2 business days SERIES accessories, included in the price: + 2x Teflon grid (see PDF / grid catalogue) OR instead + 1x plastic grid (see PDF / grid catalogue) for dough-gentle punching ...
STARTMOTOR DELCO REMY - 50 MT - 400 - MODEL 10479339 - SN M13514A
M. No.: 111208990B // Age: NEW // Binding speed: 300 bindings/hour Paper format: DIN A4 Cover spine width: 3.5 - 28 mm Binding capacity: max. 280 pages (80 g / m²) Equipment / Additional information: 11 packages of materials
Doser, manufacturer unknown, in a good used and functional condition. Dosing machine for liquid, pasty and chunky products. Metal parts made entirely of stainless steel. 50 litre funnels. Filling head height infinitely adjustable. Dosing quantities and filling speed infinitely adjustable, control line for external pulse generators. Pneumatic drive, external compressed air supply 6 bar required. Dimensions B/T/H 130/70/190 cm. Workshop-tested, ready to use. Further on request.
ELKOMAK ERD 312 Compressed air dryer 312m3/h Bj 2013,
Robust, high-quality rotary device for cylindrical workpieces (boiler rollers), steel rollers coated with polyurethane, infinitely adjustable rotation speed, high frequency protected, right and left run, maximum load capacity of the two units together 14,000 kg, Workpiece diameter 600 mm to 5,500 mm, drive power 2 x 0.55 kW, steel drive rollers of 400 x 100 mm, rotation speed 120 – 1,200 mm/min, maximum temperature load capacity of the rollers up to 110° C, dimensions see illustrations, weight of the set (driven and non-driven unit approx. 870 kg
Robust, high-quality rotary device for cylindrical workpieces (boiler roller set), steel rollers coated with polyurethane, infinitely adjustable rotation speed, high frequency protected, right and left run Largest load capacity of the two units together 5,000 kg, workpiece diameter 200 mm to 3,000 mm, drive power 2 x 0.37 kW, drive rollers made of steel of 250 x 80 mm, rotation speed 80 – 1,200 mm/min, maximum temperature load capacity of the rollers up to 110° C, dimensions see figures, weight of the set (driven and non-driven unit together) approx. 230 kg
Hose pump for conveying corrosive, abrasive, highly viscous or highly dense liquids. Due to its simple design, the pump is self-priming, low-wear and dry-running. Manufacturer: Delasco Type: DSC65PA1S Y.O.M.: 10/2001 Q= 3.1 a / 14.95 m3/h P= 15 bar with geared motor SEW-Usocome 220/380 V; 11 kW; 1440/ 7.2/44.0 rpm Inlet opening approx. 55/100 mm Total approx. 1400 x 1300 H 1150 mm
Glue dosing station MAYER AND MAYER DXR R2020R L-P-PUB PDX20 40-100 P manufactured in 2015 in Germany by MAYER & MAYER HANDELS GMBH. The station was in use for about 3 months in the process. After this time, it was shut down, cleaned and properly secured. All gaskets in the station were replaced with new ones. It is a charging station for manual dispensing / application guns for two-component adhesives. The gun is included for free. Spare parts are offered for the station. Price of the parts to be individually agreed.
Type: Engine, Type number: 12V71 7123-7305 GENERATOR 438KVA
Replacement columns for die-casting machine OL1500, D250x12, Oleopress, used - overhauled Special price! Attention: The current new price is certainly twice as high. In addition, we also have a new spar nut and 2 adjusting nuts in separate adverts. If you have a VAT number, we will be happy to issue you with an invoice without VAT. Second hand! The part was bought from a spare parts store of a company, it was overhouled by a specialist company, is in a very good condition and fully functional. Attention: We have not cleaned the column yet, as the fat layer is optimal for storage. Material 25CrMo4 Manufacturer Olepress / O.P. DIE Casting Thread 250 x 12mm Thread fixed end 300mm lg Thread adjustable end 1160mm lg Weight approx. 2300 kg Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250 ...
Replacement columns for die-casting machine OL1600, D250x14, Idra, new -50% Special price! Attention: The current new price is certainly twice as high. If you have a VAT number, we will be happy to issue you an invoice without VAT. As good as new in original packaging! The part was bought from a spare parts store of a company and has never been in use, is completely as new and in the original packaging. Material 25CrMo4 Manufacturer Olepress / O.P. DIE Casting Thread 250 x 14 mm, L 5908 mm, Thread fixed end 290mm lg Thread adjustable end ca. 1160mm lg Weight approx. 2300 kg Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300
Replacement columns for aluminium die-casting machine OL2000, D285x10, Oleopress, new -50% Special price! Attention: The current new price is certainly twice as high. In addition, we also have a spar nut and 2 adjusting nuts in separate adverts. If you have a VAT number, we will be happy to issue you with an invoice without VAT. As good as new in original packaging! The part was bought from a spare parts store of a company and has never been in use, is completely new and in ist original packaging. Material 25CrMo4 Manufacturer Olepress / O.P. DIE Casting Thread 285 x 10mm, L 6830mm Weight approx. 3400 kg Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300
; Power [PS]: 1822; Gross weight [kg]: 10293; Engine: Cummins KTA50-GS8; Accessories: Battery, Control Panel, Cummins C1675 D5A, Cummins KTA50G, , Incl. Coolant Heater and Battery Charger
Shot piston to die casting machine OL, D225 mm x 510 mm, Oleopress, used - overhauled Special price! If you have a VAT number, we will gladly issue an invoice without VAT. As good as new condition The part was bought from a spare parts store of a company, was overhauled by a specialist company and is in mint condition. - Piston bronze D225 x 190 mm incl. 5 piston rings - Piston rod D 113 mm - Total length 510 mm - Weight 60 kg
2500 heavy-duty grids various variants Used goods, very good condition, see pictures Material: Hot-dip galvanized Weight load: approx. 450 kg/m² Bearing rod runs over the long side The following variants are currently available: Dimensions Mesh size Bearing bar height Material thickness Bearing bar 1000x1000mm 19x30mm 45mm 3mm 1410x1000mm 19x30mm 45mm 3mm 1335x1000mm 19x30mm 45mm 3mm 1335x485mm 19x30mm 45mm 3mm 1335x720mm 19x30mm 45mm 3mm 1410x720mm 19x30mm 45mm 3mm 1410x670mm 19x30mm 45mm 3mm 1335x885mm 19x30mm 45mm 3mm 1410x870mm 19x30mm 45mm 3mm 1410x885mm 19x30mm 45mm 3mm 1140x1000mm 19x30mm 45mm 3mm Negotiation price: € 45,- per m³ net from stock P10267 Larger quantities on request! Numerous gratings with different mesh sizes and support rods are available! Goods are in stock. Transport and assembly possible on request. Viewing possible at ...
; Gross weight [kg]: 4832; Engine: Caterpillar C15; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 910
Goring Kerr DSP2 Metal detector Stainless frame, belt dimension 2400mm x 200mm, aperture 300mm x 100mm, pneumatic blow reject into reject bin, 3Ph
Goring Kerr Metal detector Model: DSP2 Serial: 56692 Stainless frame, variable speed, belt dimension 1950mm x 260mm, aperture 350mm x 130mm, pneumatic push arm reject into reject bin, 3Ph
; Gross weight [kg]: 5033; Engine: Caterpillar C15; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 842
This brand new machine is part of Caterpillars rebuild program, Ask us for more information., , Available in 50Hz - 400V , Prime rating 1.500 kVA, Standby rating 1.600, , Controls: EMCP4.2 / ADEM 3; Power [PS]: 1740; Gross weight [kg]: 14000; Engine: Caterpillar 3512B; Accessories: Battery, Control Panel
; Gross weight [kg]: 2016; Engine: Caterpillar C7.1; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 349
; Gross weight [kg]: 5300; Engine: Volvo TWD1683GE-SV; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 985
; Gross weight [kg]: 5370; Engine: Volvo TAD1381GE; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 534
; Gross weight [kg]: 3100; Engine: Deutz TCD6.1L6-SV; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Sockets: (400V) 63A, 32A, 16A, Sockets: (230V) 2x 16A; Water Tank Volume [l]: 1100
; Power [PS]: 24; Gross weight [kg]: 757; Engine: X2.5-G2; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 55
; Power [PS]: 41; Gross weight [kg]: 842; Engine: X3.3-G1; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 55
; Gross weight [kg]: 5245; Engine: Volvo TAD1382GE-SV; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 1000
GeneralCNC Turning Centre; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways620 mmTransverse stroke260 mmLongitudinal stroke795 mmClamping chuck diameter max.315 mmWork spindle (left)Spindle bore91 mmSpindle diametre on front bearing140 mmMain drive 1Drive power (100% DC)22 kWSpeed range- 4000 rpmMax. torque (40% DC)525 NmTorque (100% DC)410 NmAccuracy at point stopping0,001 degreeTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-6000 rpmPower max. (100% DC)10 kWFloor space/WeightDimensions (L x W x H)3,99 x 2,03 x 2,2 mWeight approx.6500 KgTechnologie cycle alternating speedTechnology cycle for the application of an alternating speed for vibration sensitive set-ups (Only in conjunction with Siemens control)Y-Axis PartingTechnology cycle to parting off the workpiece by the Y-axis to ac ...
GeneralMilling Specification; Control: Control M730UM with CELOS CharacteristicsMax machining diameter278 mmDimensions (L x W x H)2,82 x 2,09 x 2,15 mDrive power tool spindle5,5/5,5/3,7 kWDrive power main spindle11/15/15 kWRapid feed X / Z30/30 m/minInput precision of C-axis on Mainspindle0,001 degreeRotary tool spindle speed10000 rpmMovements X / Z260/590 mmNumber of tool stations12 Speed max.6000 rpmBar diameter max.52 mmSwing- Ø, max.755 mmMax. Turning Length192 mmWeight approx.4900 KgCELOS - ERGOline TouchCELOS - ERGOline Touch to facilitate machine operation incl. 21.5 ERGOline Touch ® control with multi touch screens Uniform management, documentation and visualization of order, process - and machine data Networkable with CAD / CAM User friendly and pHigh-output spindle (Left Spindle) 15/ 11 kW, 6,000 min-1(Left Spindle) High-Output Spindle 15/11 kW (20/15 HP), 6,000 min-1 The NLX ...
GeneralCNC Turning Centre with C axis and tool drive; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways700 mmTurning diameter410 mmLongitudinal stroke850 mmTransverse stroke300 mmMax. Turning Length800 mmClamping chuck diameter max.315 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle diametre on front bearing130 mmSpindle bore87 mmMain drive 1Drive power (100% DC)33 kWSpeed range20 - 4000 rpmTorque (100% DC)580 NmC-Axis Speed-200 rpmTorque of C-Axis (holding torque)225 NmAccuracy at point stopping0,01 degreeTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-4000 rpmPower max. (40% DC)11,3 kWFloor space/WeightDimensions (L x W x H)3,99 x 2,69 x 1,99 mWeight approx.6500 KgTechnologie cycle alternating speedTechnology cycle for the ...
GeneralCNC Turning Centre with C axis and tool drive; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways700 mmTurning diameter410 mmTransverse stroke300 mmLongitudinal stroke850 mmMax. Turning Length800 mmClamping chuck diameter max.315 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWSpeed range25 - 5000 rpmTorque (100% DC)280 NmC-Axis Speed-200 rpmTorque of C-Axis (holding torque)225 NmAccuracy at point stopping0,01 degreeTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-4000 rpmPower max. (40% DC)11,3 kWFloor space/WeightDimensions (L x W x H)4,46 x 1,88 x 2,30 mWeight approx.6500 KgTechnologie cycle alternating speedTechnology cycle for the ...
; Gross weight [kg]: 2960; Engine: Deutz TCD4.1L4; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 1100
maximum number of results exceeded
please refine your search
