perske d used for sale

I sell a bus machine Prochera DSB. Year of construction 2005. 2-sided spindle fi.30 x max. 220mm. Main motor 1.1 kW. Buerste included. Weight 90 kg. Available the same.

Key data: 1140 °C

Continious Brazing/Sintering furnace manufactured by Mahler. Type: Humpback (lower H2 consumption). Belt width: 450mm Clearance above belt: 200 mm Heating length: 5000mm Gross throughput: 600 kg/h Electric heating power: 198 kW Service temperature: 1140 Adjustable range of belt speed: 100-1000 mm/min Temperature cotroul groups: 5x Total length: 30m width: 1,8m height: 2,8m Hydrogen connection: 0,1bar 30Nm3/h (type 3.0) Nitrogen connection: 0,1 bar 60 Nm3/h (type 5.0) Exhaust gas : 300 m3/h Furnace is in use, and was regularly serviced. In 12. 2024 brick lining, heating elements, thermocouples, mesh belt and muffle was replaced . Spare parts are available, in case of interest, can be subject of seperate agreement. Offer includes: - Water cooling system with glicol base heat exchanger - Exhaust tubes (2x around 5m Stainless steel) - 5x sensor system to detect ex ...

FRASCOLD SA 210 BY / MCL 80 Brand:FRASCOLD, DELTA TECHNICS Type:SA 210 BY / MCL 80 Stock number:M21-6073 Cooling capacity:5.8 kW Number of fans:1 + 4 Fin spacing:6,35 mm Refrigerant:HFC Voltage:400 / 230 Volts Dimensions:706 x700 x 512 / 2250 x 700 x 250 mm Weight:65 + 59 kg Year:2004 Number in stock:1 piece(s) Price: Quotation request Description: Complete Frascold system with 1 piston compressor. Equipped with a Delta Technics evaporator (MCL 80) and an Eliwell ID 974 controller. Mentioned capacity at an evaporating temperature of -5°C and an ambient temperature of +32°C. Visit also our website: used-refrigeration

Thermo-Combinator Crystallizer Schab Heat Exchanger / Cooler with scraped surface used Manufacturer: Schröder&Co Type: UTK 18/200-DH2A Stainless steel The system was used to heat, maintain temperature and cool ketchup. Hourly output approx. 1800 - 2000 kg 1 dosing pump with two pump heads for water/spice paste and tomato paste Capacity tomato paste 0-868 l/h Total dimensions approx. 3.5 x 1 x 1.5 m. Original price was approx. 270,000 DM The plant comes from a plant where canned food was produced. Changes and errors in the technical data and information excepted.

DYNAJET 350th HELI high pressure hot water cleaner. Including 1st UVV WITH arrival and maintenance (plus spare parts) on the same date (value approx. 1,500 net). The mobile and universally applicable dynaJET cold and hot water high-pressure cleaner 350th with up to 350 bar working pressure stands out in addition to its ease of use in particular due to its low weight, its compact dimensions and its high performance and safety level. Construction - 1-axle chassis for easy manoeuvring - Self-supporting and indestructible framework for weight optimization - Crane eyelet for easy transport and handling - Operating hours counter for optimal post-calculation - Underrun protection for additional safety - Frame in dip painting technology for high corrosion protection and highest surface quality - Targa concept with separation between the unit side and the operating side for eno ...

DURMA MS 2504 mechanical guillotine shears were built in 2014 in Turkey by DURMAZLAR MAKİNA SANAYİ ve TİCARET A.Ş. The machine, designed for precision cutting of workpieces with a maximum thickness of 4 mm, offers high reliability, precision and efficiency. Sheets made of among others stainless steel, copper or aluminium, are machined using high-quality cutting knives with adjustable gap between blades. Daily operation of the machine, on the other hand, is facilitated by the convenient foot switch and intuitive NC control. The DURMA guillotine shears weight 3230 kg. Technical specifications of the DURMA MS 2504 guillotine shears - NC control - maximum sheet metal length: 2550 mm - maximum sheet metal thickness: 4 mm - cutting angle: 1°30′ - number of strokes: 42/min - back stop stroke: 1000 mm - foot switch control - motor power: 7.5 kW - power supply: 3x 400 V; 50 Hz  ...

Diesel forklift 2.5-ton load capacity with a Kubota engine offers impressive performance and is super maneuverable, even in tight spaces. Thanks to its efficient fuel consumption and robust drive, it is ideal for flexible use in warehouses and confined work areas. Specifications: - Engine: Kubota V2607-CR-E5B - Power: 38 kW (50.9 hp) at 2400 rpm - Torque: 174.1 Nm at 1500 rpm - Emission standard: EU Stage V / EPA Tier 4 - Displacement: 2,615 L - Fuel tank: 60 L - Transmission: 1-1 Powershift - Load capacity: 2500 kg - Max. lifting height (standard fork): 3000 mm - Fork dimensions: 1070 x 100 x 40 mm - Total weight: 3680 kg - Vehicle width: 1170 mm - Total length with fork: 3646 mm - Total length without fork: 2576 mm Powerful Kubota diesel engine - Compact design for tight applications - Environmentally friendly & efficient according to EU Stage V - Ideal for w ...

The "Epoch TM" extrusion casting apparatus (wide slot nozzle) has been designed and constructed for the thermoforming of polypropylene (heavy films). Operating fluids PA12, PP For other materials, contact must be made in advance with the manufacturer in order to check the processability. Specifications: Weight 839 kg. ; Power supply 230 V; number of zones cast body 14; Encapsulation block 2; KW total: cast body 21.9 KW; Auto Gauge 730 KW; Cast lip heating 3.4 KW; Additional equipment: internal edge boundaries with fixed length

Diesel forklift with a load capacity of 3,000 kg and a Kubota engine offers impressive performance and manoeuvrability. It is ideal for tight warehouses and confined work areas, as it ensures low fuel consumption and high reliability. With its robust construction and strong pulling force, this forklift is perfect for versatile applications in different environments. We offer a wide range of electric, gas and four-wheel drive forklifts with load capacities from 1 to 10 tonnes. If you need any further information, please do not hesitate to contact us. Specifications: - Load capacity: 3,000 kg - Engine: Kubota 4-cylinder diesel engine - Lifting height: up to 4,500 mm - Steering: Hydrostatic - Travel speed: max. 20 km/h - Tyres: pneumatic tyres, front: 6.00-9, rear: 6.00-9 - Total weight: approx. 4,800 kg - Tilt angle: 6° Tyres: - Front tire: 6.00-9 (pneumatic tire) - ...

Diesel forklift with a load capacity of 3,500 kg offers impressive performance and manoeuvrability, ideal for warehouses and tight work areas. With a powerful engine, hydrostatic steering, pneumatic tyres and high-lift equipment, it ensures efficient fuel consumption and high tractive force. We also offer electric forklifts, gas forklifts and four-wheel drive forklifts in various capacities and options, including chassis adjustment, double telescopic mast and an ergonomic cab for comfortable operation. - Load capacity: 3500 kg - Emission standards: EU Stage V, EPA Tier 4 - Engine: Kubota V2607-CR-EW03 - Power: 38 kW / 50.9 hp at 2200 rpm - Torque: 174.1 Nm at 1500 rpm - Displacement: 2,615 L - Fuel tank: 70 L - Transmission: 1-1 Powershift - Max. lifting height: 3000 mm (standard fork) - Fork dimensions: 1070 x 125 x 45 mm - Total weight: 4700 kg - Vehicle width: 1225 mm - ...

This rugged diesel forklift with a load capacity of 4,000 kg (8,818 lbs) is the perfect choice for demanding applications in tight storage areas. Equipped with a powerful engine, hydrostatic steering, pneumatic tyres and high-lift equipment, it offers excellent manoeuvrability and energy efficiency. In addition, we also have electric, gas and four-wheel drive forklifts in various designs and options such as chassis adjustment, double telescopic mast and ergonomic cab to meet all your special requirements. - Engine: Kubota V2607-CR-E5B - Power: 38 kW (50.9 hp) at 2400 rpm - Torque: 174.1 Nm at 1500 rpm - Emission standard: EU Stage V / EPA Tier 4 - Displacement: 2,615 L - Fuel tank: 70 L - Transmission: 1-1 Powershift - Load capacity: 4000 kg - Max. lifting height (standard fork): 3000 mm - Fork dimensions: 1070 x 130 x 50 mm - Total weight: 5310 kg - Vehicle width: 1410 mm  ...

Diesel forklift 5.0 tons (5,000 kg, 11,023 lbs) is perfect for intensive use in large warehouses and when lifting heavy loads. Equipped with a powerful four-cylinder engine, hydrostatic steering, pneumatic tyres and a high-lift mast, it ensures fast and efficient transport of goods. In addition, we also offer electric forklifts that enable emission-free work in confined spaces, gas forklifts for balanced performance in various applications, and four-wheel drive forklifts that are ideal for outdoor use. Features: - Load capacity: 5000 kg - Engine: Cummins F3.8 - Power: 55 kW / 73.7 hp at 2500 rpm - Torque: 400 Nm at 1300 rpm - Displacement: 3.8 liters - Fuel tank: 140 liters - Emission standards: EU Stage V / EPA Tier 4 - Transmission: 2-2 Powershift - Maximum lifting height: 3000 mm (with standard fork) - Fork dimensions: 1220 x 150 x 55 mm - Total weight: 8160 kg - Vehi ...

Diesel forklift with a load capacity of 6,000 kg (6,000 kg, 13,228 lbs) offers reliable performance, even with heavy loads and challenging working conditions. Thanks to the hydrostatic steering, pneumatic tyres, high-lift equipment and dual-circuit braking systems, the truck remains manoeuvrable and safe even under extreme loads. If you're looking for a more environmentally friendly alternative, we also have electric forklifts for zero-emission operations, gas forklifts for greater flexibility, and four-wheel drive forklifts that are ideal for rugged use on construction sites and rough terrain. Specifications: - Engine: Cummins F3.8 - Power: 55 kW (73.7 hp) at 2500 rpm - Torque: 400 Nm at 1300 rpm - Emission standard: EU Stage V / EPA Tier 4 - Displacement: 3.8 L - Fuel tank: 140 L - Transmission: 2-2 Powershift - Load capacity: 6000 kg - Max. lifting height (standard fork) ...

Powerful forklift for demanding journeys with 7.0T to lifting capacity (7,000 kg, 15,432 lbs). Cummins diesel direct injection, hydrostatic steering, pneumatic tyres, tilt. Ideal for lifting up and tilting! Also available in electric for zero-emission transport, in gas for medium distances, in transports and in all-wheel drive for difficult off-road models. Specifications: - Load capacity: 7000 kg; - Engine: Cummins F3.8; - Power: 55 kW / 73.7 hp at 2500 rpm; - Torque: 400 Nm at 1300 rpm; - Displacement: 3.8 l; - Fuel tank: 140 liters; - Emission standards: EU Stage V / EPA Stage 4; - Transmission: 2-2 Powershift; - Maximum height of the construction: 3000 mm ; Fork dimensions: 1220 x 150 x 70 mm; - Vehicle width: 1995 mm; Overall length: 4800 mm – with fork / 3580 mm – without fork; Control: steering wheel and precise joystick; - Tires: front: 8.25-14-14PR, rear: 8.1 ...

DEUTZ 1015 Connecting rod Part number: 0422 6240 Condition: refurbished (RECON) Attention: We also have various other RECON parts of different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Diesel Forklift Capacity 8.0 T (8,000 kg, 17,637 lbs) is just the right thing for real heavy work. A powerful Cummins diesel engine, hydrostatic steering, pneumatic tires and rough terrain stabilizers ensure maximum comfort and efficiency, especially with heavy loads. In addition to diesel forklift trucks, Jungheinrich also offers electric forklifts for a clean and emission-free solution, gas forklifts for versatile use and all-wheel drive forklifts for universal use in multi-vehicle depots. Specifications: - Engine: Cummins F3.8 - Power: 90 kW (120.6 hp) at 2200 rpm - Torque: 500 Nm at 1500 rpm - Emission standard: EU Stage V / EPA Tier 4 - Displacement: 3.8 L - Fuel tank: 140 L - Transmission: 2-2 Powershift - Load capacity: 8000 kg - Max. lifting height (standard fork): 3000 mm - Fork dimensions: 1220 x 150 x 75 mm - Total weight: 9850 kg - Vehicle width: 1995 mm -  ...

The diesel forklift with a load capacity of 10.0 tons (10,000 kg, 22,046 lbs) has been specially developed for the transport of particularly heavy loads. Equipped with a modern Cummins diesel engine, hydrostatic steering, pneumatic tires and a closed hydraulic system, it offers the highest performance and efficiency. For special requirements, we also have electric forklifts for zero-emission solutions, gas forklifts for versatile applications and four-wheel forklifts that are great for difficult off-road conditions. Specifications: - Engine: Cummins F3.8 - Power: 90 kW (120.6 hp) at 2200 rpm - Torque: 500 Nm at 1500 rpm - Emission standard: EU Stage V / EPA Tier 4 - Displacement: 3.8 L - Fuel tank: 140 L - Transmission: 2-2 Powershift - Load capacity: 10,000 kg - Max. lifting height (standard fork): 3000 mm - Fork dimensions: 1220 x 175 x 80 mm - Total weight: 12,900 kg  ...

Diosna Wendelkneter Type: W240 A Completely overhauled and repainted Spiral kneader extendable for max. 240 kg dough or for max. 150 kg flour 2 speeds slow and fast 2 automatic timers 2 spiral spiral steel / nickel-plated Spirals are made of steel and completely nickel-plated with plier lock Boiler is driven by friction wheel drive Head hydraulically lifting and lowering with switch box with 3 stainless steel boilers / Refurbished Vat capacity 355 litres Machine and boiler were completely overhauled and repainted Height: 180cm Width: 110cm depth: 150cm

Treif Diskus Smart Circular Knife Machine digital control Circular knife Cutting width adjustable from 4mm to 15mm 400V 50Hz Stainless steel cladding Weight approx. 150 kg Operating voltage 400 volts Control voltage 24V/DC V AC Rated power 0.9 kW Height: 110cm Width: 65cm Depth: 70cm

BUHLER Polishing / pearling machine DSRH 15 1V 5S for seeds, groats LIKE NEW For rice, barley, wheat, spelt... Bargain..

Recon Part number: 0208 8696 (with acceptance) / 0407 9093 (without acceptance) Attention: We also have various other RECON parts of different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

Recon Part number: 0208 9754 Complete standard dimensions: 210/175mm incl. counterweights and gear incl. DNV-GL test Attention: We also have various other RECON parts of different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

The machine is in good technical condition, a test run is possible by prior arrangement. Hours: 8,981 Upper driven tool turrets with Y-axis, lower driven turret, double slide with two spindles. Control: FANUC 31i-B. Max. circumferential diameter above the bed: 300 mm Max. circumferential diameter over the support: 230 mm Max. turning diameter above the bed with upper turret: 230 mm Max. turning diameter above the bed with lower turret: 230 mm Max. turning length: 600 mm Max. distance between the ends of the right and left spindle: 980 mm Milling area outside the axis of rotation due to Y-axis: 100 mm (+/- 50 mm) Max. rod diameter (left spindle): 65 mm Max. rod diameter (right spindle): 65 mm Max. permissible workpiece weight without sub-spindle (incl. chuck weight = 23 kg): 12 kg Total weight: 7,800 kg Accessories: SS 2500 bar feeder, length 200–1 ...

Recon Complete, left and right variant with exhaust valve Part number right: 1243 1318 Part number left: 1243 1319 Attention: We also have various other RECON parts of different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ------------ Sale only to commercial customers! ---------------------------------------------------------------------- ------------- If you have any further questions, please do not hesitate to contact us!

Baler Dixi 80 SLD, with lift/tilt device, semi-automatic, year 2016 Manufacturer: Dixi Type: Dixi 80 SLD Year of Make: 2016 Hours: 1030 Drive power: 11 kW, 400 V / 32 A Filling opening: 1,040 x 1,110 mm (WxL) Press force: 80 t Pressing cycle: approx. 35 s Capacity: approx. 1000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (WxHxL) Bale weight: approx. 500-600 kg Binding: 3-fold, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (LxWxH) Machine weight: approx. 8,000 kg Materials: paper, cardboard, cardboard Note: The press is in very good condition. The hydraulic hoses were to be replaced. The operating instructions are available. Viewings, also under power, are possible at any time by arrangement. On request, we also carry out tests with your material for an expense allowance. We will also be happy to answer any questions you may have about the machine by pho ...

DEMAG Crane Chain Hoist DCM-Pro 2 80 1/1 H2.8 V16/4 80 kg with Crane Headliner (2x3m) The Manulift DCM-Pro has been developed for safe and fast load handling with one-handed operation. The DCM-Pro is based on the lifting unit of the DC-Pro chain hoist and the DSM-C control unit. Thanks to the control unit, which is rigidly connected to the load handling device, the operator only needs one hand to operate the chain hoist as well as to guide the load. Manufacturer: DEMAG Type: Crane Chain Hoist Model: DCM-Pro 2 80 1/1 H2.8 V16/4 Load capacity: 80 kg Control: GSA Type 4 Movement radius: laterally 3 meters and forward/backward 2 meters Steel beams: included in the offer Condition: used Complete plant closure, large selection of mezzanines, pallet racks, shelving racks, paternosters. High Quality Industrial Machinery, Lathes, Grinding Machines, Hand Machinery Su ...

a well-preserved CNC portal milling machine Dörries Scharmann] type FZ 25, built in 1994, table 6000 x 2500 mm, travel distances X/Y/Z 6000/2500/2000 mm, portal passage 3000 mm, table load approx. 40 tons, with automatic milling head change. CNC control Heidenhain TNC426, dimensions approx. 18 x 8 x 7 m, weight approx. 174 to.

Recording for lifting tippers for Diosna or Kemper lifting tipper models Dimensions: 120x110x125cm W/D/H

Maximize the power and efficiency of your machinery with the DENISON M3B Series Hydraulic Motor, specifically engineered to convert hydraulic pressure into rotary motion for heavy-duty industrial applications. The M3B 012 1N00 B102 model delivers exceptional torque and precision, ideal for applications requiring high performance and reliability. Type: Fixed Displacement Rotary Hydraulic Motor Max Pressure: Up to 350 bar Speed Range: Up to 4000 RPM Nsbmsv D H Nney Ex Ipocu Applications: Industrial machinery, hydraulic systems, mobile equipment Made In: France Features: 1. Rotary Motion: Converts hydraulic energy into rotational power for driving mechanical systems 2. Durability: Built to withstand high torque and pressure in demanding environments 3. Efficient Operation: Suitable for continuous, high-load applications 4. Compact Design: Space-efficient for easy integ ...

Diosna Spiral Kneader Type: SP 160 AD extendable spiral kneader for a maximum of 160kg of dough or for a maximum of 100kg of flour with 2 timers Automatic switching on and off via clocks Stainless steel flour dust cover 2 speeds (gears) slow and fast Boiler locking via pliers operated with hydraulics suitable for almost all doughs robust and strong Trade-in, delivery and assembly on request Vat capacity 260 litres

The machine is in good technical condition, an inspection by prior arrangement is possible. Max. turning diameter: 465 mm Max. circumferential diameter: 680 mm Max. rotation diameter via cross slide: 465 mm Max. width of the cross-section: 315 mm Travel in X/Z: 300/1050 mm 315mm 3-Jaw Hydraulic Chuck Max. spindle speed: 3250 rpm Spindle bore: 76 mm Spindle drive power (40%/100% ED): 33/22 kW Max. spindle torque (40%/100% ED): 630/420 Nm Max. speed driven tools: 4000 rpm Programmable tailstock, tool measurement, chip conveyor S/No. 8045000336E (2011) Installed power: 50 kVA Power supply: 400 V; 50/60 Hz Dimensions (L x W x H): 5250 x 2300 x 2000 mm Machine weight: 8000 kg

fully functioning used 3 axis milling machine, brand lid, type FP2, with vice, and many accessories.

Copeland compressor unit Type: D6DT5-320X-AWM/D (x4) Volume: 4 x 126.9 m3/h Cooling capacity: 220 kW przy -10°C/40°C, 56 kW przy -35°C/40°C Refrigerant: R404A Reference number: Z17 Pieces in stock: 1 Condition: Used Price on request, We have many other kealte plants and meat and fish processing machines : Bitzer,Copeland,Frascold,Lunite,Kueba,Guentner,Eco,Alfa-Laval,Goedhart ,Helpman

for frozen meat blocks

The STIGAL DYNAMIC SPEED HQ 1500X3000 plasma cutter was manufactured in 2013 by the Polish company Stigal. A computer-controlled thermal cutter is designed for cutting out shapes from a sheet of metal. It is equipped with, among others in: CNC G-CODE control, CAD / CAM WRYKRYS software, CEBORA PROF 165 HQC aggregate, or a cover protecting the operator's eyesight. The cutter's cutting width is 1500 mm, length is 3000 mm and the thickness is 20 mm. The machine's torch moves at a speed of 330 mm / s and cuts metal sheets with a maximum thickness of 20 mm. The total weight of the machine is 3 tons. Technical data of the STIGAL DYNAMIC SPEED HQ 1500X3000 cutter - cutting length: 3000 mm - cutting width: 1500 mm - maximum material thickness: 20 mm - maximum cutting thickness: 20 mm - permissible table load: 150 kg / m2 - maximum travel speed: 90 m / min - type of burner height adju ...

Wintersteiger DSG 150/200 Thin-cutting creel with center cut device and planing device Cutting width: 150 mm | Cutting height: 200 mm For sale is a professional thin-cutting creel of the type Wintersteiger DSG 150/200, equipped with a center cutting device and integrated planing unit. The machine is ideal for precise slat production with minimal material loss – especially in the parquet, furniture and solid wood processing sectors. Specifications: • Cutting width: up to 150 mm • Cutting height: up to 200 mm • Minimum fin thickness: approx. 1.5 mm • Kerf: from approx. 0.9–1.2 mm (depending on the tool) • Stroke rate: up to 450 strokes/min • Feed speed: approx. 0.3 – 1.8 m/min • Main motor power: 11 kW • Cutting accuracy: ± 0.1 mm Equipment: • Center incision device for centric incisions • Integrated planing device (double planer)  ...

Specifications: - max. Load capacity 10000 kg - Flat discs 1400 x 1400 mm - Flat disc hydr. swivel 0 - 90 / 135 ° - Rotary movement infinitely variable 0.05 - 1.2 rpm - Right - + left-hand running controllable - Welding current transmission approx. 500 A - Drive 400 V - Table height at horiz. Position approx. 2500 mm - E. handheld remote button - Space requirement approx. W 2000 x H 2500 x D 2700 mm - Weight approx. 5200 kg

; Gross weight [kg]: 13500; Accessories: 40FT HC Unused Genset Container

Control: Dialog 11 with new MCP card Travel range: x-800 y-600 z-550 mm Spindle speeds: 18 – 6300 rpm Pinole by hand: 80 mm Recording: SK 40 Feed: 2 to 10000 mm/min Rapid response: 10000 mm/min Weight: approx. 4050 kg With full cab, chip conveyor, electr. Handwheel Installation dimensions: L: With controller and chip conveyor approx. 4200 mm (without conveyor approx. 3200 mm) B: approx. 3800 mm (With space to open door E-cabinet approx. 4600 mm) H: approx. 2400 mm Can be visited under electricity.

The CE08 series is an electrically driven high-pressure cleaner. This model is the ideal tool for general cleaning work. Built into a stainless steel frame, this robust high-pressure cleaner is easy to move and can be equipped with various accessories, such as rotor nozzles, chemical injectors and a sandblasting kit. Similar but no Dynajet, Falch, Kärcher, Oertzen, etc. Available models: ----- CE08-200 50Hz 200 bar 16 l/min. CE08-200 60Hz 200 bar 16 l/min. General Specifications: ----- Power of the drive motor: 6.0 kW Volts: 400V (50Hz) - 440V (60Hz) Amp: 12.8A (50Hz) - 12.3A (60Hz) Dimensions: 690 mm x 560 mm x 900 mm Weight: 70 kg Includes standard accessories.

Diosna Dough Machine Model: Laboratory Kneader Stainless steel boiler and kneading arm for max. 6 kg dough Protective grille with protection circuit 2 gears Machine base mobile DGUV V3 tested E-system NEW Connection 400V, 3 Amp, 16A-CEE plug Used machine overhauled with 6 months warranty

Demag 250 kg crane system Payload: 250 kg Control GSA Type 4 Drive: Side: 3m Forward 2m Crane system has already been dismantled. Complete plant closure, large selection of mezzanine, pallet racks, shelves, paternosters. High-quality industrial machines, lathes, grinding machines, manual machines

-Boiler Hebekiper Diosna HKV 224 -with Boku stage -suitable for boilers with metal pipes on the sides -Tilt height approx. 120cm -Height 245cm -Footprint approx. 170x107cm -Year of construction 2015

Stone slab oven Quail Piccolo I-6 DMS 3 Master Year: 2011 Shared oven -6 floors each 80x60 -each floor fits 2 sheets 60x40cm next to each other long ago -each floor fits a sheet metal 60x80cm transversely -each floor with separate control -Above us bottom heat separately adjustable -each floor with separate swath box -Floor entrance height: 14cm -with base including sheet metal shelf -with exhaust air hood -Control from the oven on the left -Year of construction 06 / 2011 -Electrical connected value: 26.4 kW -Voltage: 400V AC/3Ph/N/PE/50Hz External dimensions: 117cm wide 110cm deep without hood 227cm high

-6 floors each 80x60 -each floor with separate control -Above us bottom heat separately adjustable -each floor with separate swath box -Floor entrance height: 14cm -with base including sheet metal shelf -with exhaust air hood -Year of construction 06/2011 -Electrical connected value: 26.4 kW -Voltage: 400V AC/3Ph/N/PE/50Hz -External dimensions approx. 110cm deep without hood 117cm wide 227cm high

For sale: Diosna spiral kneader W 240 - 3 boilers - Program memory - Speed control with an inverter - with the possibility to change the speed of the spiral/tool - boiler with tilting possibility - perfect condition Contact: damianborucki@anbox.pl or +48 692 345 660 (also WhatsApp)