129,484 used machines on RESALE, but how to find them? Machine Search
Machine type: TIG inverter welding system gas-cooled direct current system Make Eurotronic Type TIG 1501 - DCi Connection voltage 1 x 230 volts Setting range 5 – 150 amps Duty cycle 35 % d.c. at 150 amps 60% d.c. at 120 amps 100% d.c. at 100 amps Current adjustment infinitely variable max. weldable material thickness 4 mm Cooling inverter by built-in fan Cooling burner gas-cooled Portable assembly line design Fuse 16 amps Dimensions L x W x H 400 x 170 x 250 mm Weight 9 kg Age approx. 10 years Condition workshop-tested, very good, incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece ME-TIG burner TH 161 G, 4 m 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 piece spare parts box cpl. Equipped 12 Months Warranty 1 Piece Instruction Manu ...
Material: Stainless steel 1.4571 Drive: 15 KW / 400-4000 RPM Weight: 1100 kg Mixer: Turbulent - mixing plant Speed mixing plant: approx. 400-4000 RPM Operating voltage: 400 V Control voltage: 230 V Frequency: 50 Hz Protection class: IP 54; Additionally available: --> Cabinet --> Documentation.
Durchlauf - Schneidegatter, Fabr. Delta
The Trivac D65B rotary vane vacuum pump is: absolutely as good as new checked according to the manufacturer's specifications, so that all games and dimensions are in the tolerances equipped with new wear parts Available at short notice includes one year warranty After refurbishing, our Leybold Trivac D65B Rotary Vane Pump wants: be good as new be checked after the manufacturer's specifications, for example its tolerances be fitted with new wear parts be available at short notice included one-year warranty
Block vane vacuum pump LEYBOLD DK200 is after the overhaul: absolutely mint condition According to manufacturer specifications verified so all games and mass in the tolerances are with new wear parts available at short includes one year warranty LEYBOLD DK200 rotary piston pump pumps will: be good as new be checked after the manufacturer's specifications, for example its tolerances be fitted with new wear parts be available at short notice included a one-year warranty
1 of un-used! column-mounted, industrial manipulator / lifting device (balancer), make Dalmec, type Posifil PFC, new 1998. Standard column 2.300 mm tall. Designed for a maximum lifting load of 30 kgs. Maximum radius 3.000 mm. Vertical stroke 1.500 mm. With special gripper designed to lift, lower and tilt products approx. 45 degrees. Assumed application was handling storage bins 470 x 350 mm (pictures show example only, not necessarily the exact product handled). Could of course be used for various products. Width and depth of gripper can be adjusted. CE-marked but no operating manual available. Pneumatic diagram and spare parts list in German available. Two identical balancers available. Visible mobile foot-plate NOT included (used for our own internal transport and demo purposes).
Various sizes Control Panel for refrigeration installations. Container load batches, mixed models and types. We have hundreds available, please see pics for some examples
IMMEDIATELY AVAILABLE - video link on request KA 550 CNC-DRILL CNC-controlled 3-axis sawing and drilling center for sophisticated production technology Encapsulated, compact machine - designed as a closed production island - no noise and no chips in the machine environment - large extraction connection for efficient chip extraction. (The machine is also supplied as a two-axis sawing center without drilling unit). Dimensionally accurate 90° saw cuts both in small series and in large series production. CNC control based on Windows® with touch screen and color screen, simple menu-driven programming with symbols, remote maintenance module. Absolutely burr-free precision sawing of all materials such as - various plastics such as PVC and polyamide - GRP (glass fibre reinforced plastics) - aluminium - bronze - wood - copper - brass and . Drilling (through holes and blin ...
IMMEDIATELY AVAILABLE - video link on request CNC-controlled 3-axis sawing and drilling center for sophisticated production technology Encapsulated, compact machine - designed as a closed production island - no noise and no chips in the machine environment - large extraction connection for efficient chip extraction. (The machine is also supplied as a two-axis sawing center without drilling unit). Dimensionally accurate 90° saw cuts both in small series and in large series production. CNC control based on Windows® with touch screen and color screen, simple menu-driven programming with symbols, remote maintenance module. Absolutely burr-free precision sawing of all materials such as - aluminum - bronze - GRP (glass fiber reinforced plastics) - wood - copper - brass and various plastics such as PVC and polyamide. Drilling (through holes and blind holes – step drills ...
Qty. 1 Second-hand extrusion press including log furnace Mfc.: SMS Built: 1986 Force: 960 MT (9.3 MN) Press jaw: Wide: 155 mm Height: 140 mm Max. inlet: 130 mm (144 mm block, 5 mm protection per side) Recipient: 149,9 mm Extras: Heatable tool cassette from Marx (installed 2016) Conversion of recipient to resistance heating (beginning of 2016) Punch press disc: 149,2 mm Broaching disc: 150 mm Billet Ø: 144 mm Length: 265 – 540 mm Log length: 3000-4800 mm Log Furnace Mfc.: Extrutec GmbH Built: Temperature: 480-520 °C Zone 1: 460-490 °C Zone 2: 440-470 °C Zone 3: 400-450 °C Table weight: Max. 1350 g/m Min. 80 g/m Electrical control cabinet Puller Exhausting system Cooling device Spare parts for furnace combustion air Spare parts head burner Spare parts oven stove bo ...
Tribloc (rinser-filler-capper), pressure filler, isobaric, with vacuum pump pre-evacuation, manufacturer: Cimec Italy, type AM DPS 12-12-1, 12 rinsing nozzles, 12 filling valves, 1 head crown corker, year of construction: 2013, with height adjustment, approx. 1,500 operating hours, set to current bottle diameters 67 mm and 85 mm. Tribloc (Rinser-Filler-Crowner), counter pressure, isobaric, with vacuum pump, pre-evacuation, Made by: Cimec Italy, Type: AM DPS 12-12-1, 12 head rinser nozzles , 12 filling valves, 1 head crown corker, Year: 2013, with hight adjustment, total operating hours approx. 1.500 hours, adjusted to bottle diameter 67 mm and 85 mm.
Cutting Lenght 6000 mm Cutting Thickness 16 mm Stroke per Min 10
Universal tool milling machine DECKEL FP 1 with 3 axis active digital display Heidenhain TNC 113 Year of construction: 1987 Travel: X 300 Y 160 Z 340 Speed range: 40 – 2000 rpm With the following accessories: Universal table 600 mm x 250 mm clamping surface Movable vertical milling head Extendable drill quill Infinitely variable feed via potentiometer 1 machine vice 1 counter holder with counter bearing 1 pc. milling mandrel long 0 22 mm Various tool holders S 22 x 2 Bellows Z Axis Machine light Automatic central lubrication pump Chip collection plate Coolant system Operating instructions THE MACHINE IS IN VERY GOOD CONDITION
X-AXIS STROKE MM 2,400 Y-AXIS STROKE MM 960 AXLE STROKE Z MM 800 TABLE SIZE MM 2600X900 ATTACK: BT50 SPEED ROTATION REVOLUTIONS/MIN 12,000 TOOLS N ° 30 FANUC 31I MODEL A CONTROL YEAR: 2012
Key data: 600 mm, 1250 mm, 3000 1/min
Machine Details Stock-No. 1105-03939 Type of machine CNC Lathe - Inclined Bed Type Make GILDEMEISTER DMG Type NEF 600 Year of manufacture 2006 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Germany Delivery time immediately Freight basis EX WORK Price Technical details turning diameter 600 mm turning length 1250 mm control SIEMENS 840 D greates pass round over bed 600 mm centre height 350 mm Spindle Bore 92 mm turning speed range 3500 rpm Rapid Travel - Longitudinal/Face 20 m/min face stroke 400 mm tailstock quill diameter 100 mm Tailstock Quill Stroke 1150 mm tailstock taper MT 5 Turret (X-Stations) 12 turning diameter over slide 410 mm Additional information Acc. 3-Jaw Chuck 315 mm, tailstok turret 8 P ,chip conveyor, coolant CNC Siemens 840 D
CDL VERT. DAHLIH MODEL: DL-MCV 610 X-AXIS STROKE: 520 mm Y-AXIS STROKE: 330 mm Z-AXIS STROKE: 460 mm TABLE SIZE: 760 x 330 mm SPINDLE SPEED: 5,000 RPM FAST SPEED: 32 m/min ATTACO: BT 40 TOOL NUMBER: 16 CONTROL: FANUC 10M
used
We sell large post steel raw DN1200, coated on the outside, coated on the inside, wall thickness 20mm, lengths up to 12 m, To this end, we also have new arcs, different degrees.
OMSO DM144/ 6 LIDS, 6-Color Lid Printer, only used for 26,000 hrs ! Infeed Conveyor for feeding Vertical Lid Stacks Robotic removal of Lids from stack to Print Conveyor Auto-Denester Unit No Lid no Ink and No Lid no Print System ARCOTEC CG20-2 Pretreatment station Main 6-Color Print Unit Speed Control for Ink Fountain Rollers Printing Roller self-cleaning device Max. speed 30,000 Lids/ hr (depending on Lid size & shape) Max. Lid dia. Ø 200 mm Min. Lid dia. Ø 50 mm Max. Lid Height 25 mm Max. Rectangular Lid size: 200 x 200 mm Max. Printing dimensions: 180 x 180 mm No. of Printing Blankets 4 UV Tunnel TUV 0077-99 UV-Tunnel power rating : 8 kW Main printer power rating: 20kW Polytype Counter/ Stacker unit delivers Counted Lid Stacks. 400 V 3phase, 50 Hz, Printing Plate Pre-registration Unit. with Monitor Display
Web guider ElGuider, DRB1402, Erhardt+Leimer, new -40% Special price ! We still have several identical and other such devices, but the quantity is ending. Buy more than 1 piece there is still a great discount. The current new price of a similar product is about € 4.300. If you have an UID number, we will gladly issue an invoice without VAT Top condition like a demonstration unit The part was removed from a new machine, which can be proven to have run only about 100 hours. ELGUIDER - DRB1402 Rotary frame system Profinet with rotary frame DR 1401 in compact version for the control of a running web, with digital position controller and brushless actuator, Control frame for D100 rollers, - Size: Size 2, - Nominal width NB: 250 mm, - transfer length LUE: 250 mm - Sensor: FX 46 ultrasonic sensor, - Incl. existing cables - Sensor adjustment: Manual, Standard, - F ...
Paper boring machine Dürselen Corta PB 04; Cleaned and tested; 4 drill heads (up to 6 stick.usable); Drill cooling and lubrication; Sliding table; Endless drilling tape; Inlay depth behind the holes 65mm; Max. Stack height 50mm; Sliding table size before the drills 300mm; Max. Drilling distance over sliding table 420mm. Paper drilling machine Dürselen Corta PB 04; The cleaned and checked; Four heads (up to 6 heads); Driller cooling and lubrication; Sliding table; endless drilling band; size behind drillers 65mm; Max.pile hight 50mm; Seft of table in front of the drillers 300mm; max.drilling distance over the table 420mm.
Automatic labeller for the application of one vignette label on the upper panel of carton. Mechanical speed 400 cartons per minute
LeoMat Digitakt 330 SFR – Slitter/Rewinder/UV-Flexo/Laminating Year of manufacture: 2011 Servo drive Job memory up to 50 jobs Register control: Semi- and fully rotary electronic motor control Electronic web edge control Waste and misprint stop Unwind shaft: d=76mm Unwind diameter: 700mm Rewind shaft: d=76mm Rewind diameter: 550mm Automatic web stop at machine stop Flexo printing unit GALLUS EM 340 Web width: 340mmm Cliché 1.14mm Fully rotary register control including servo drive Die-cutting and printing of materials UV drying Web width: 410mm Laminating Pressure station mounted on printing cylinder Punching unit LeoMat L Adaptation of the GALLUS R250 magnetic cylinder Rotometrics impression cylinder Grid rewind servo driven Integrated edge trim sucti ...
Double door autoclave De Lama model DLOV year of manufacturing 1998. Useful capacity 4990 liters. Supply voltage 380 V - 50 Hz Tri - phase. Installed power 6 kW. Maximum working pressure 2.5 bar. Maximum working temperature 138.2 C °. Installed cycles: A sterilization + drying B for vials C For closed containers I test cold vacuum machine J sterilization air filter in situ
Cordon bleu cutter -Manufacturer: DIL -Condition: used -Width: 400 mm -Transfer belt from the upper half of the meat
Key data: 500 , 94 , 30
Manufacturer/Manufacturer Manufacturer: Demag Typ/Type: Ergotech 50-270 per Bau-year year: 1997 Control/Controller: NC 4 Clothing Power/Clamping Force: 500 kN Schliessart/Clamping Type: Hydraulisch/Hydraulic Holmabstand/Dist.Betw.Tiebars: 355 mm x 355 mm Plate Groesse/Platen Size: 540 mm x 540 mm WZ Einbauhoehe/Mould hight: min 210 mm Oeff-weg/opening stroke: 400 mm Plate distance max/Max. Open Daylight: 610 mm Snail/Screw size: 30 mm Lifting volume/shot volume: 144 cc/128 gram hp Spez. Spray./injection pressure: 1890 bar General General Motor/Motor Power: 11 kW Heating/heating power: 7.5 kW Dimensions: 3.6 m x 1.2 m x 1.8 m Weicht/Weight: 2500 kg Screen text/Language: Deutsch/German Additional equipment/Additional equipment Euromap Core train x1 Air valve x1
Key data: 500 , 95 , 30
Manufacturer/Manufacturer Manufacturer: Demag Typ/Type: Ergotech 50-270 viva Bau-year year: 1997 Control/Controller: NC 4 Clothing Power/Clamping Force: 500 kN Schliessart/Clamping Type: Hydraulisch/Hydraulic Holmabstand/Dist.Betw.Tiebars: 355 mm x 355 mm Plate Groesse/Platen Size: 540 mm x 540 mm WZ Einbauhoehe/Mould hight: min 210 mm Oeff-weg/opening stroke: 400 mm Plate distance max/Max. Open Daylight: 610 mm Snail/Screw size: 30 mm Lifting volume/Shot volume: 106.5 cc/95 gram hp Spez. Spray./injection pressure: 2573 bar General General Motor/Motor Power: 11 kW Heating/heating power: 7.5 kW Dimensions: 3.6 m x 1.2 m x 1.8 m Weicht/Weight: 2500 kg Screen text/Language: Deutsch/German Additional equipment/Additional equipment Air valve x1
Key data: 600 , 52 , 25
Manufacturer/Manufacturer Manufacturer: Demag Typ/Type: Ergotech 60/420-200 Bau-year year: 1999 Control/Controller: NC 4 Control Clothing Power/Clamping Force: 600 kN Schliessart/Clamping Type: Hydraulisch/Hydraulic Holmabstand/Dist.Betw.Tiebars: 420 mm x 420 mm Plate Groesse/Platen Size: 570 mm x 600 mm WZ Einbauhoehe/Mould hight: min 210 mm Oeff-weg/opening stroke: 400 mm Plate distance max/Max. Open Daylight: 610 mm Snail/Screw size: 25 mm Lifting volume/shot volume: 61 cc/52 gram hp Spez. Spray./injection pressure: 2740 bar General General Motor/Motor Power: 22 kW Heating/heating power: 8.3 kW Dimensions: 3.7 m x 1.6 m x 2.1 m Weichtt/Weight: 3900 kg Screen text/Language: Deutsch/German Additional equipment/Additional equipment Core train x1 Air valve x3
used
Qty. 1 Second-hand billet foundry plant Mfc.: Cometal SA Built: 1989-2008 Stopped: 2014 Billet size: Dia. 145 – 152 – 178 – 203 – 228 – 254 mm Length: 7.0 m Tolerances: Dia. + 0, -2 mm Length: +/- 30 mm Deflection: 2 mm per 1000 mm
Key data: 500 mm, 160 mm
Optimisation cross-cut saw OptiCut S 90 Speed - Left-hand version Max. wood entrance length 7.2 m Wood dimensions to be processed Sawing unit for large wood cross-sections with saw blade diameter Ø 500 mm Saw blade made of tungsten carbide, Z=144, WZ 20° Saw Blade Drilling 30 mm Saw blade speed max. 3600 rpm. Input lengths min./max. Widths min./max. Thicknesses/thicknesses min./max. Nominal cross-sections (without board curvature) Min. 500 - 7200 mm 23 - 160 mm 12 - 100 mm 23 x 12 mm .max. 160 x 100 mm Package size at max.9 strips per package Packet Ratio Width and Length to Thickness 160x100 mm 2:1 Fixed length min. 60 mm Performance / Positioning Moving speed of the positioning slide infinitely variable max. approx. 240 m/min. Cutting time / cutting height Adjustable The practical daily output depends to a large extent on the production ...
Used machine for production of shortbread cookies with filling model MAX DROP CNC DUO Manufacturer HASBORG Rakszawa Poland Year of production 2009 CE mark Installed power: 2 kW power supply: 3 x 400V two-head - head 1 = two rollers, shortcrust / gingerbread / sponge-fatty pastry - head 2 = two rollers, mobile station attached optionally, fruit fillings, cream fillings, sprinkles 9 nozzles for exchange of dozens of tips squeeze cakes (plus with lowering) curly extruded cookies (plus with lowering) curly cookies curly cookies with lowering, filled cookies long cookies continuous pouring optional: string cut cookies With this compact machine, a very wide range of different pastries can be produced, including filled pastries in the center. The MAX DROP CNC DUO is equipped with two tanks for dough (e.g., two colors) or dough and filling. It includes a bar with ...
Dornier Opus with the following device components: generator Hofmann Selector D tube Comet DI 97 HS-33/81-150 0.6/1.2 Image amplifier 40cm complete and in good technical and cosmetic condition • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do not offer or imply any guarantees or warranties on any equipment sold. It is the responsibility of the buyer to ensure that all equipment is thoroughly inspected and refurbished by qu ...
Used MAX DROP single head shortcake machine. IMPORTANT: the machine was equipped with a bar for lubricating the tops of the dough with fruit filling. Manufacturer HASBORG Rakszawa Poland Year of production 2007 CE mark MAXDROP is a technologically advanced, multifunctional and single-head machine designed for the production of cakes. The machine is adapted to work with steamed, shortcrust, coconut, meringue, sponge cake or muffins with pieces of fruit. Its purpose is to dispense many types of cakes, such as single-color cakes, meringue, spice cakes, coconut cakes, dumplings, matzahs or puff straw and sponge cake tops. MAXDROP is equipped with a head that allows working with semi-liquid and hard cakes. Special rollers, which have milled notches, are mounted in the head. The speed of the rollers is adjustable. Part of the standard equipment of the machine is a bar with rotatin ...
MAX DIAMETER OF ROTATION: 750 MM MAX DIAMETER SWITCHABLE: 680 MM SWITCHABLE LENGTH: 1195 MM CNC: FANUC 18i-TB MAIN SPINDLE: MAX SPEED. OF ROTATION: 2800 RPM DIN 55026 8 ' ' CHUCK NOSE BAR PASS: 95 MM MOTOR POWER: 30 KW SELF-CENTRING DIAMETER: 315 MM Tailstock: POSITIONING STROKE: 1310 MM RACEWAY: 150 MM TUBE DIAMETER: 115 MM TORRETA TOOLHOLDER: MOTOR POWER: 10-17.5 KW TOOL DIMENSIONS: 25X25 MM BARENI DIA DIMENSIONS: 32-40 MM
Key data: 626
Pro2 container unit with 626kW el. Performance for power generation - 40 ft normal container (L x W x H in metres) 12.2 x 2.55 x 2.55 metres with lighting - MWM genset TBG 616V16K - 626kW for landfill gas, biogas or natural gas with gas control system and control cabinets for plant control, auxiliary drive supply and GCB - Current Bh number only exactly 90.000 - Soundproofed design as a plant container - Separation of containers into engine room / electrical room with connecting door - Access door to the engine room on the longitudinal side and electrical room on the front side - Gas detector and smoke detector - Supply and exhaust air system with backdrop silencer and supply air filtration - Engine cooling water circuit with circulation pump, warm-up control via 3-way mixer - Emergency cooling for HT circuit integrated into the engine cooling water circuit, designed for the c ...
With 48 filling valves 12head crown corker 12head screw capper
all stainless steel max. load 1.000 kg (depending on the product) with new control Variotronic with new vacuum pump Busch 63m³ 3 speed engine : 1 / 2,8 / 3,4 rp/min dimensions (l x dpt x h) : ± 2.080 x 1.560 x 1.920 mm
used
-X-Way-700mm -Y-way-700mm -Z-way-700mm -Control-ITNC 530 -Spindle holder HSK A63 -Spindle speed-12000rpm -Plate changer with 7 pallets -Tool magasin with 120 -Internal cooling feeder-40bar -Spindle motor-20kW -Pallet size 500x500mm -Machine weight approx.16t -Top condition,to be visited under electricity
Eurolux - Pressure Filler for glas bottles with 12 stations – Capacity 0,5l: to 650 bottles/h - NEW Technical data: - Capacity 0,5l: to 650 bottles/h, it is also possible for : 0,33l, 0,7l, 1,0l, 1,5l /other capacity - Installed power 0,37 kW - Weight: 240 kg - Measurement: HxWxD: 200 x 1000 x 1000 mm - With 12 stations - Max. pressure tank: 4 Bar - Power supply: • Supply voltage 220/50Hz • Voltage control 24V 50Hz • Current Consumption 2A • Handling 1 Person • Operating Manual and Spare Parts List available. Video available All prices are valid Ex-Works, excl.VAT Freight Charges: depending on dimensions and destination Delivery: from 97753 Karlstadt-Karlburg Subject to prior sale
Eurolux - Pressure Filler for PET - bottles 12 stations with dosing pump – Capacity: up to 650 bottles/h - NEW Technical data: - Capacity 0,5l; 1,0l; 1,5l : to 650 bottles/h – for PET bottles for syrup, water, drinks with / without gas - Installed power 0,37 kW - Weight: 240 kg - Measurement: H x W x D: 200 x 1150 x 1100 mm - With 12 stations - With dosing pump - Max. pressure tank: 4 Bar - Power supply: • Supply voltage 220/50Hz • Voltage control 24V 50Hz • Current Consumption 2A - Handling 1 Person - semiautomatic Operating Manual and Spare Parts List available. All prices are valid Ex-Works, excl. VAT Freight Charges: depending on dimensions and destination Delivery: from 97753 Karlstadt-Karlburg Subject to prior sale
maximum number of results exceeded
please refine your search
