perske d used for sale

General SKU033H111 MakeDinnissen Machinefabriek B.V. Sevenum No.1970 Year of construction1976 Mounted on framecheck Main Features MaterialStainless steel Volume2000 Ltr. Motor7.5 KW Specified Features - Ribbon blender Ribbon blender(1x) Capacity2000 Ltr. Trough sizesDia. 1000 x 2500mm With covercheck Inlet740x200mm + Dia. 125mm + Dia. 600mm Manholecheck inspection hatch 500x470mm (3x) OutletDia. 140mm With adjustable packing glandscheck Motor7,5 KW, 380 Volt (Ex) Speed mixing shaft± 26 Rpm MaterialStainless steel 1.4301 (304) Information LocationBarneveld With switchcheck Floor space1,7 x 3 m Total height2,3 m Weight2500 kg ATEX compatiblecheck Extra Specifications- Bag dump cabinet with lump breaker on top DiscountRibbon blendersDinnissenDiscountMixers > Ribbon blendersBrand > Dinnissen What you can expect from Foeth: -- Machine is in working condition --  ...

General SKU043R200 MakeEngelsmann TypeMFL 85N/80-E1 No.30223/88 LocationBarneveld Main Features Motor24 KW Inlet diameter300 mm Width150 mm Specified Features - Hammer Mill MaterialStainless steel 2.4602 (Hastelloy C-22) Hammer Mills Hammer mill(1x) Rotor sizeDia. 300x150mm Fixed hammers(6x4) Motor24 KW, 380/660 Volt, Ex Speed2300 Rpm Information Floor space1,7x0,7 m Total height1,2 m Weight800 KgDiscountHammer MillsEngelsmannDiscountMills > Hammer MillsBrand > Engelsmann What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU034F278 LocationBarneveld MakeLeiblein GmbH Hardheim TypeIR-Verdampfer IR-T 1200-3000 E No.104-0001 Main Features MaterialStainless steel Motor0.37 KW Surface11 m2 Specified Features - Roll dryer Roll dryerInfrared-drying drum/evaporator (1x) Roll surface11 m2 Roll sizesdia. 1200x3000mm With knife dischargecheck With variable speed drivecheck Roll speed0,1-1,0 Rpm With jacketcheck Motor0,37 KW, 230/400 Volt MaterialStainless steel 1.4301 (304) Information Year of construction2003 Mounted on frameElectric heating (27x 8 KW) With switchgearcheck Floorspace5,6x1,5 M Total height2,6 M Weight3500 KGDiscountRoll dryersLeibleinDiscountDryers > Roll dryersBrand > Leiblein What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the ...

Offer 26118 Technical data: - Possible working range with options 0.3 - 30 mm - Max. disc diameter 164 mm - Point angle infinitely adjustable 118 - 150 ° - Speed at the disc surface 29 m/s - Speed 2800 rpm - Drive 230 V / 0.2 kW - Space requirement approx. W 450 x H 300 x D 450 mm - Weight approx. 30 kg - Clamping holders 3.0 - 12 mm - Clamping holders 12 - 21 mm - Grinding device for 3-dashing countersinks - Cross table

- Produzione: 1 - 15 Kg/h

- Produzione: 1 - 15 kg/h

- Produzione: 1 - 15 kg/h

Macchina composta da: deumidificatore Moretto D204 + Frame Moretto CRC 2S con 2 tramogge Moretto TC75 dotate di esseccatori Moretto HG2 S50 + Frame Moretto CR 250 con tramoggia TC75 dotata di essiccatore Moretto HG2 S50 TASTIERINO NON INCLUSO

- Produzione: 1 - 15 kg/h

Macchina composta da deumidificatore Moretto D205 anno 2001 + frame Moretto CRC 3S con 3 tramogge moretto TC75 + 3 essiccatori Moretto HG2 del 2003 a bordo di ogni tramoggia

General2-axes universal turning center with driven tools and C-axis; Control: Control Fanuc 0i-F Plus with iHMI and Manual Guide i Working areaSwing diameter over bed650 mmMax machining diameter460 mmSwing diameter over X linear guideways520 mmClamping chuck Ø254 mmX travel300 mmZ travel730 mmMain drive 1Type of main driveAC Drive power (100% DC)15 kWDrive power (40% DC)19,5 kWSpeed range-3500 rpmTorque (100% DC)246 NmMax. torque (40% DC)319 NmWork spindleSpindle noseA2-8 Spindle diametre on front bearing140 mmSpindle bore91 mmBar diameter max.80 mmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.4000 rpmPower max. (40% DC)5,44 kWTropical PackageTropenpaket für Maschine Option beinhaltet: - aktives Kühlaggregat für Schaltschrank - zusätzlicher Ventilator im Bedienpult Empfohlen ab 35°C bis max. 40°C Umgebungstemper ...

General2-axes universal turning center with driven tools and C-axis; Control: Control Fanuc 0i-F Plus with iHMI and Manual Guide i Main drive 1Type of main driveAC Drive power (100% DC)15 kWDrive power (40% DC)19,5 kWSpeed range-3500 rpmTorque (100% DC)246 NmMax. torque (40% DC)319 NmWorking areaSwing diameter over bed650 mmSwing diameter over X linear guideways520 mmMax machining diameter460 mmClamping chuck Ø254 mmX travel300 mmZ travel730 mmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.4000 rpmPower max. (40% DC)5,44 kWWork spindleSpindle noseA2-8 Spindle diametre on front bearing140 mmSpindle bore91 mmBar diameter max.80 mmDouble cartridge filter for coolantDouble Cartridge Filter for Coolant Options includes two filters placed on the coolant distributor. When one filter is stocked, operator can manually switched  ...

General2-axes universal turning center with fixed tools; Control: Control Fanuc 0i-F Plus with iHMI and Manual Guide i Working areaSwing diameter over bed650 mmSwing diameter over X linear guideways520 mmMax machining diameter460 mmClamping chuck Ø254 mmX travel300 mmZ travel730 mmMain drive 1Type of main driveAC Drive power (100% DC)15 kWDrive power (40% DC)19,5 kWSpeed range-3500 rpmTorque (100% DC)246 NmMax. torque (40% DC)319 NmWork spindleSpindle noseA2-8 Spindle diametre on front bearing140 mmSpindle bore91 mmBar diameter max.80 mmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmSignal lamp with 4 colours standardSignal lamp with 4 colours Red: general error Yellow: intervention necessary Green: automatic mode Blue: setup modeAlternative Speed TurningTechnology cycle Alternate Spindle Speed (Turning) for the application of an alternate speed for vib ...

General2-axes universal turning center with fixed tools; Control: Control SIEMENS SINUMERIK ONE Working areaSwing diameter over bed650 mmSwing diameter over X linear guideways520 mmMax machining diameter460 mmClamping chuck Ø254 mmX travel300 mmZ travel730 mmMain drive 1Type of main driveAC Drive power (100% DC)15 kWDrive power (40% DC)19,5 kWSpeed range-3500 rpmTorque (100% DC)246 NmMax. torque (40% DC)319 NmWork spindleSpindle noseA2-8 Spindle diametre on front bearing140 mmSpindle bore91 mmBar diameter max.80 mmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mm

General2-axes universal turning center with fixed tools; Control: Control SIEMENS SINUMERIK ONE Main drive 1Type of main driveAC Drive power (100% DC)15 kWDrive power (40% DC)19,5 kWSpeed range-3500 rpmTorque (100% DC)246 NmMax. torque (40% DC)319 NmWorking areaSwing diameter over bed650 mmSwing diameter over X linear guideways520 mmMax machining diameter460 mmClamping chuck Ø254 mmZ travel730 mmX travel300 mmWork spindleSpindle noseA2-8 Spindle diametre on front bearing140 mmSpindle bore91 mmBar diameter max.80 mmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mm

General2-axes universal turning center with fixed tools; Control: Control SIEMENS SINUMERIK ONE Working areaSwing diameter over bed650 mmSwing diameter over X linear guideways520 mmMax machining diameter460 mmClamping chuck Ø254 mmX travel300 mmZ travel730 mmMain drive 1Type of main driveAC Drive power (100% DC)15 kWDrive power (40% DC)19,5 kWSpeed range-3500 rpmTorque (100% DC)246 NmMax. torque (40% DC)319 NmWork spindleSpindle noseA2-8 Spindle diametre on front bearing140 mmSpindle bore91 mmBar diameter max.80 mmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mm

General2-axes universal turning center with fixed tools; Control: Control SIEMENS SINUMERIK ONE Working areaSwing diameter over bed650 mmSwing diameter over X linear guideways520 mmMax machining diameter460 mmClamping chuck Ø254 mmX travel300 mmZ travel705 mmMain drive 1Type of main driveAC Drive power (100% DC)15 kWDrive power (40% DC)19,5 kWSpeed range-3500 rpmTorque (100% DC)246 NmMax. torque (40% DC)319 NmWork spindleSpindle noseA2-8 Spindle diametre on front bearing140 mmSpindle bore91 mmBar diameter max.80 mmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmSignal lamp with 4 colours standardSignal lamp with 4 colours Red: general error Yellow: intervention necessary Green: automatic mode Blue: setup mode

Working areaSwing diameter over bed650 mmSwing diameter over X linear guideways520 mmMax machining diameter460 mmClamping chuck Ø254 mmX travel300 mmZ travel730 mmGeneral2-axes universal turning center with fixed tools; Control: Control SIEMENS SINUMERIK ONE Main drive 1Type of main driveAC Drive power (100% DC)15 kWDrive power (40% DC)19,5 kWSpeed range-3500 rpmTorque (100% DC)246 NmMax. torque (40% DC)319 NmWork spindleSpindle noseA2-8 Spindle diametre on front bearing140 mmSpindle bore91 mmBar diameter max.80 mmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mm

General2-axes universal turning center with fixed tools; Control: Control SIEMENS SINUMERIK ONE Working areaSwing diameter over bed650 mmSwing diameter over X linear guideways520 mmMax machining diameter460 mmClamping chuck Ø254 mmX travel300 mmZ travel730 mmMain drive 1Type of main driveAC Drive power (100% DC)15 kWDrive power (40% DC)19,5 kWSpeed range-3500 rpmTorque (100% DC)246 NmMax. torque (40% DC)319 NmWork spindleSpindle noseA2-8 Spindle diametre on front bearing140 mmSpindle bore91 mmBar diameter max.80 mmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmSignal lamp with 4 colours standardSignal lamp with 4 colours Red: general error Yellow: intervention necessary Green: automatic mode Blue: setup mode

General2-axes universal turning center with fixed tools; Control: Control SIEMENS SINUMERIK ONE Working areaSwing diameter over bed650 mmSwing diameter over X linear guideways520 mmMax machining diameter460 mmClamping chuck Ø254 mmX travel300 mmZ travel730 mmMain drive 1Drive power (100% DC)15 kWType of main driveAC Drive power (40% DC)19,5 kWSpeed range-3500 rpmTorque (100% DC)246 NmMax. torque (40% DC)319 NmWork spindleSpindle noseA2-8 Spindle diametre on front bearing140 mmSpindle bore91 mmBar diameter max.80 mmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mm

General2-axes universal turning center with fixed tools; Control: Control SIEMENS SINUMERIK ONE Working areaSwing diameter over bed650 mmMax machining diameter460 mmSwing diameter over X linear guideways520 mmClamping chuck Ø254 mmX travel300 mmZ travel730 mmMain drive 1Type of main driveAC Drive power (100% DC)15 kWSpeed range-3500 rpmDrive power (40% DC)19,5 kWTorque (100% DC)246 NmMax. torque (40% DC)319 NmWork spindleSpindle noseA2-8 Spindle diametre on front bearing140 mmSpindle bore91 mmBar diameter max.80 mmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmTropical PackageTropenpaket für Maschine Option beinhaltet: - aktives Kühlaggregat für Schaltschrank - zusätzlicher Ventilator im Bedienpult Empfohlen ab 35°C bis max. 40°C Umgebungstemperatur.Signal lamp with 4 colours standardSignal lamp with 4 colours Red: general error Yellow: interventi ...

General2-axes universal turning center with fixed tools; Control: Control SIEMENS SINUMERIK ONE Working areaSwing diameter over bed650 mmSwing diameter over X linear guideways520 mmMax machining diameter460 mmClamping chuck Ø254 mmX travel300 mmZ travel730 mmMain drive 1Type of main driveAC Drive power (100% DC)15 kWDrive power (40% DC)19,5 kWSpeed range-3500 rpmTorque (100% DC)246 NmMax. torque (40% DC)319 NmWork spindleSpindle noseA2-8 Spindle diametre on front bearing140 mmSpindle bore91 mmBar diameter max.80 mmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmSignal lamp with 4 colours standardSignal lamp with 4 colours Red: general error Yellow: intervention necessary Green: automatic mode Blue: setup mode

On offer is a flour storage and dosing system from professional bakery production, used. It is an interconnected industrial plant for the storage, dosing and weighing of flour. The plant is designed as a functional system and is suitable for bakeries, food production and industrial dough production. Extensive documentation available (including manufacturer's documentation, explosion protection documentation). Plant components: - 3 flour silos (REIMELT/ Daxner) outdoor area, metal version) - 2 REIMELT flour dosing and weighing systems - Hoppers, dosing devices, discharge units - Pneumatics, pipes, valve technology - Weighing units and controls Modernization: Extensive technical overhaul and investment in the plant (piping, components, etc.). The plant is currently located at our customer's site in Pasewalk and is being sold due to restructuring. A viewing is expressly recom ...

Key data: 1600 KW, 2000 kVA, 400 V

Brand: Caterpillar Inc. Model: 3516 Year: 1990 Type: Industrial diesel engine Configuration: V16 (16 cylinders) Cycle: 4-stroke Displacement: approx. 69 liters Turbocharged: Yes (twin turbo) Cooling system: Water-cooled Power output: approx. 1,600 – 2,000+ HP Operating speed: approx. 1,200 – 1,800 RPM

Overview: Manufactured in 2004 by the German company Dr. Datz Maschinenbau GmbH, this reliable 24-head wire bail capper is designed for securely sealing wire bail closures on bottles. A high-quality German-built machine, ideal for efficient and precise capping operations in bottling lines. Technical Details: Manufacturer: Dr. Datz Maschinenbau GmbH Type: BVM 24R Year of Manufacture: 2004 Number of Capping Stations: 24 Closure Type: Wire bail closures Machine Direction: Left to right

Paper drill Dürselen Corta PB 04 N; cleaned and tested; 4 drill heads; Drilling lubrication and cooling; Speed regulation; Speed table stroke adjustable; max. Stack height 50mm; Insertion depth behind drill 42mm; Sliding table; Hole spacing 31.7-293mm; Endless drill belt; Optionally with Filofax 7-fold drill head. Paper driller Dürselen Corta PB 04 N; cleaned and checked; 4 heads; lubrication and cooling system; adjustable drilling speed; adjustable table hub speed; max.pile hight 50mm; depht behind the driller 42mm; slide table; distance between the holes 31,7-293mm; endless drill band.

Working areaSwing diameter over guide ways330 mmSwing diameter over transverse guideway260 mmTurning diameter200 mmTransverse stroke182,5 mmLongitudinal stroke455 mmClamping chuck diameter max.210 mmGeneralUniversal Turning Machines; Control: Siemens 840D SL Main drive 1Type of main driveAC Drive power (100% DC)11 kWDrive power (40% DC)16,5 kWSpeed range- 5000 rpmTorque (100% DC)112 NmWork spindleSpindle noseFlat flange Diametre of spindle nose140h5 mmSpindle bore74 mmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988030 mmFloor space/WeightDimensions (L x W x H)4,47 x 2,01 x 1,75 mWeight approx.3800 KgPROGRESSlinePROGRESSline Digital Cycle-time Graphic Rest Time Product Counter12 stations servo-tool turret reception VDI 3012 stations tool turret (servo) reception VDI 30, make Sauter Note: option available only for machine in V1 versionConnection for oil mist ext ...

GeneralCNC Turning Centre with C axis and tool drive; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways700 mmTurning diameter410 mmTransverse stroke300 mmLongitudinal stroke850 mmMax. Turning Length800 mmClamping chuck diameter max.315 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWSpeed range25 - 5000 rpmTorque (100% DC)280 NmC-Axis Speed-200 rpmTorque of C-Axis (holding torque)225 NmAccuracy at point stopping0,01 degreeTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-4000 rpmPower max. (40% DC)11,3 kWFloor space/WeightWeight approx.6500 KgDimensions (L x W x H)3,99 x 2,69 x 1,99 mTechnologie cycle alternating speedTechnology cycle for the  ...

GeneralCNC Turning Centre with C axis and tool drive; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways700 mmTurning diameter410 mmTransverse stroke300 mmLongitudinal stroke850 mmMax. Turning Length800 mmClamping chuck diameter max.315 mmBar diameter max.65 mmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose170h5 mmSpindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)25 kWSpeed range25 - 5000 rpmTorque (100% DC)280 NmAccuracy at point stopping0,01 degreeTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-4000 rpmPower max. (40% DC)11,3 kWFloor space/WeightDimensions (L x W x H)3,99 x 2,69 x 1,99 mWeight approx.6500 KgPlug-in board with 2x4 free in-/outputsInputs / outputs programmable via M-functions, consisting of: 8 inputs 4 outputs ...

General SKU204Y005 MakeFlottweg Serial009.006.01 Magento base g_extra_specificationsDia 620mm, drum material 1.4463, drum drive 75kW , screw drive 22kW, 500 volt motors, with spare screw angle inclination 8 degrees. Information LocationBarneveld CEcheck Main Features MaterialStainless steel Motor75 KW Specified Features - Decanter Decantercheck Screw diameter600 mm Screw length2500 mm InletDN65 Liquid outletcheck 250x800 mm Solids outletcheck 700x800 mm Motor75 kW, 500 V 1483 rpm With hydraulic unitcheck Motor22 kW, 500 V 1465 rpm Max. rotor speed3000 rpm MaterialStainless steel 1.4463 Information TypeZ6E-4/454 No.009.006.01 Year of construction1996 With switchgearcheck Control panel (as is): No Electrical panel included Floorspace4,90x1,80 m Total height1,30 m Weight9750 kg Extra SpecificationsDrum speed 3000 rpm, screw differential speed 1-31 rpm, : We ...

General SKU223T197 MakeFlottweg-Dekanters (DE) TypeZ 32-3/401 No.902336 Year of construction1991 LocationBarneveld Main Features MaterialStainless steel Motor20 KW Specified Features - Decanter Decantercheck Screw diameter320 mm Screw length934 Inletø 45 mm Liquid outletcheck Solids outletcheck Motor20 kW (400 V, 2940 rpm) Max. rotor speed5000 rpm MaterialStainless steel 1.4408 Information Floorspace2,1 x 1,3 m Total height0,8 m Weight1400 kgDecantersNew arrivalsFlottwegCentrifuges > DecantersNew arrivalsBrand > Flottweg What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU223T196 MakeFlottweg Dekanter (DE) TypeZ3L No.F 831 Year of construction1981 LocationBarneveld Main Features MaterialStainless steel Motor22 KW Specified Features - Decanter Decantercheck Screw diametermax. 420 / min. 226 mm Screw length900 mm Inletdia. 46 mm Liquid outletcheck Solids outletcheck Motor22 kW (400 V, 2940 rpm) Max. rotor speed4000 rpm MaterialStainless steel 1.4307 (304L) Information With switchcheck With switchgearcheck (as is) Floorspace2,3x1,3 m Total height1,9 m Weight2350 kgDecantersNew arrivalsFlottwegCentrifuges > DecantersNew arrivalsBrand > Flottweg What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU241P262 LocationBarneveld MakeLEWA TypeLCA Pressure Working pressure30 Bar Main Features MaterialStainless steel Volume3.33 Ltr. Motor0.18 KW Specified Features - Dosing pump Pumpecosmart diaphragm metering pump Capacity3,33 Ltr/h With motor0.18 KW, 230/400 Volt (EX II2G c IIC T1-T4) With variable speed drivecheck Inletdia.8mm Outletdia.8mm Information Mach.No.533537-010.002 Year of construction2011 Floorspace0,4 x 0,3 M Total height0,5 M Weight30 KG Extra SpecificationsPistondia.6mmDosing pumpsFood additivesLewaPumps > Dosing pumpsIndustries > Food & Feed > Food additivesBrand > Lewa What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more  ...

Machine : Grinding Wheel Flange Make : Grinding wheels and grinding wheels Type: Inner cone holder Pos. Text pcs. φ φ H- Schleifsφ Schl. B φ A 3 58 74 83 400 approx. 320 B ELB 4 50 62 60 127 30-50 170 C ELB 4 44 60 68 127 20-40 180 D 1 45 60 70 127 30-60 190 E 2 27 34 44 approx. 85 -30 130 F 1 45 60 75 127 -50 190 G 1 29 35 44 Ca.85 -30 146 H 1 45 60 75 Ca.135 -60 180 I 2 45 60 75 127 30-60 180/190 J 2 27 43 56 127 -40 175 K 3 32 32 55 127 20 158 S Grinding wheel : NEW – for a centerless cylindrical grinding machine, Dilvmit+Kircher D- 10C 100/8 hp V03 , 406x200x203mm ( 270x25x25) Price: € 200,-

We are looking for all models of Doosan, Daewoo, Hyundai and Hitachi wheeled excavators for export

This beer drive delivery station is designed for efficient liquid transfer in breweries and beverage factories. The device is mounted on a frame with integrated forklift pockets to ensure easy mobility and handling. It features a pump, an inductive flow meter, a control cabinet with a totalizer and two toggle switches, and a 20 m long DN40 hose (hose replacement recommended) with a hose reel. Other features include a pneumatically controlled flap valve, a compressed air connection, and three manual flap valve connections, making it a versatile and practical solution for controlled beverage dispensing. Our team at VBW Asset Trade will be happy to answer your questions., Hose: 20 m DN40, Length: 2,2 m, Width: 1,2 m, Height: 1,62 m, Base construction: mounted on rack with forklift shoes integrated, Features: pump, inductive flow meter, control cabinet with summation counter and two flip swi ...

Sevenchefs DC-203 dicer dicing machine. Blade assembly included with spare parts included. This item was purchased brand new and only used for 2 months. This is in impeccable like new condition.

used Dräco coil carriage, smooth-running spindle, optimal tension, very easy to drive Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is being carried out Belt width :1000 mm Coil weight load capacity: 1000 kg Colour: blue Weight: 110 kg Dimensions: 1300 x 750 x 1000 mm Coil inner diameter (min.): 250 mm Coil inner diameter (max.): 515 mm Coil outer diameter (max.): 1100 mm Coil width (min.): 1000 mm Clamping range :280 - 510 mm

Key data: 30 t

DURENDUS 30 T Heating Press – Double Column Press – 700 × 500 mm Heating Plates, Sliding Table The machine shown here has already been built and delivered on behalf of a customer. We can manufacture this machine for you at very short notice – gladly taking individual options into account. It is a hydraulic heating press with electrically heated plates and manual sliding table for pressing, laminating and forming processes under the influence of temperature. Base price: 23.500 € net Options (on request): The options listed are based on completed customer projects and enable the machine to be specifically adapted to the respective application. The basic machine represents a functional basic design – in practice, in most cases it is expanded with additional equipment and configured accordingly for the specific project. Technical data + information: General i ...

General SKUR1308 MakeAnhydro TypeSFP-59 (Spin Flash Dryer) No.E-866.219C Year of construction2006 Mounted on framecheck Main Features MaterialStainless steel Motor18.5 KW Inlet diameter400 mm Specified Features - Spray dryer Spray dryerSpin Flash Dryer Drying tower dia.800 mm Cylindrical height± 2200 mm OutletDN 315 Motor11 kW 380-400-415/660-690 Volt Evaporation capacity347 kg/h (water) Air heating (gas)check With fancheck (2x) Capacity1: 3154 m³/h: 2: 6000 m³/h Motor1: 11 kW: 2: 18,5 kW MaterialStainless steel 1.4301 (304) Information LocationBarneveld Floorspace2,1x2,1 m Total height4,5 m Extra Specificationswith: - feed vat Ø1000 mm, motor: 11kW 1500 rpm, RECONDITIONED Spray dryersReconditionedAnhydroDryers > Spray dryersReconditionedBrand > Anhydro What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new ...

General SKU075B490 MakeGEA Westfalia Separator AG TypeSCA 220-02-33 No.8001 242 Year of construction1998 Mounted on framecheck Main Features MaterialStainless steel Motor15 KW Specified Features - Decanter DecanterThree phase twin drive decanter (1x) 3-Phase decantercheck Screw diameter220/125mm Motor15 kW, 400Volt + 4,0 kW, 400Volt With variable speed drive(2x frequency inverter) Max. rotor speed2700-5500 Rpm MaterialStainless steel Information LocationBarneveld With switchgearcheck Floorspace2,4x2,4 m Total height2,3 m Weight2800 kgDiscountDecantersGEA WestfaliaDiscountCentrifuges > DecantersBrand > GEA Westfalia What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barne ...

General SKU103Y799 MakeBaker Perkins, Stoke on Trent TypeMPC/V30 Mach.No.65034 Year of construction19856 Sizes Screw diameter30 mm Main Features Motor3 KW Inlet diameter30 mm L/D14 Specified Features - Double screw extruder Double screw extrudercheck Screw diameter30mm, Screw length 420mm L/D14 Co-rotatingcheck Number of heating zones:3 (6x 200 Watt per zone) + die heater Electric heatingcheck Water coolingcheck DC-motor3,0 KW, 180 Volt With variable speed drivecheck Feeding with metering screwdia. 32mm Used ontoner Information LocationBarneveld Floorspace2,0 x 0,9 m Total height2,0 m Weight820 kg Technical specs Extra informationMoC: screw housing The material 1.0762 or 44SMn28 is an unalloyed quenched and tempered steel.Double screw extrudersBaker PerkinsExtruders > Double screw extrudersBrand > Baker Perkins What you can expect from Foeth: -- Machine is  ...

A double-sided glass drilling machine Schraml (Lisec-Group) is available. Glass inclination: 8°, max. processing height: 1300mm, max. glass length: 2500mm, max. glass thickness: 40mm, max. drilling diameter: 100mm, speed: 5000rpm, machine dimensions X/Y/Z: approx. 3000mm/900mm/2000mm, weight: approx. 1500kg. An on-site inspection is possible.

Deboning belt, s/s frame, plastic belt, belt width: 500 mm, total dimensions: 5400 mm x 1400 mm x 2550 mm. Missing cutting plates.

A refrigeration system / drinking water storage tank from the companies DK-Kälteanlagen / Daxner is offered Technical data: Manufacturer: DK-Kälteanlagen GmbH Emsdetten/ Daxner Model/ Type: KWE 950 with Aggr. SIL AGD 4590 ZTZ Year of Make: 2022 Capacity: 950 ltr. Max. operating overpressure: 6 bar Max. operating temperature: 95 degrees C Standards: DIN 4753, DIN 1988 Refrigerant: R 449A Corrosion protection: Two-layer enamelling The device is part of a complete sourdough plant, which is offered in a separate advertisement. It is currently with our customer in Pasewalk and is being sold due to restructuring. Only the offered assets are expressly sold, any items that can be seen in the photos are expressly not part of the scope of the offer. We sell the assets on behalf of our customers. The offer prices are net prices in EURO ex works. Since these are used assets, w ...

Dosing and mixing plant Dekumed Unidos 300-3K. More information on request. Immediately available.

Key data: 333 KW, 1500 1/min

Was used as a power generator. The generator broke, the customer bought a new one! Built in 2015. Hours : 4600 Normal state No sardines ! More pictures by mail.