perske d used for sale

Water Dosing Unit, Deltamatic, Type D 60 - 80

Rheon Free divider

A refrigeration system / drinking water storage tank from the companies DK-Kälteanlagen / Daxner is offered Technical data: Manufacturer: DK-Kälteanlagen GmbH Emsdetten/ Daxner Model/ Type: KWE 950 with Aggr. SIL AGD 4590 ZTZ Year of Make: 2022 Capacity: 950 ltr. Max. operating overpressure: 6 bar Max. operating temperature: 95 degrees C Standards: DIN 4753, DIN 1988 Refrigerant: R 449A Corrosion protection: Two-layer enamelling The device is part of a complete sourdough plant, which is offered in a separate advertisement. It is currently with our customer in Pasewalk and is being sold due to restructuring. Only the offered assets are expressly sold, any items that can be seen in the photos are expressly not part of the scope of the offer. We sell the assets on behalf of our customers. The offer prices are net prices in EURO ex works. Since these are used assets, w ...

Key data: 333 KW, 1500 1/min

Was used as a power generator. The generator broke, the customer bought a new one! Built in 2015. Hours : 4600 Normal state No sardines ! More pictures by mail.

Key data: 130 mm

Stock# UG6397 Used line for WPC (wood plastic composite) acoustic panels production. Line had been working on acustic panels with width 600 mm x length up to 6 m. Maximal possible width up to 900 mm. Line consist of: - Twin screw, co-rotating extruder by Weber (D) model DS 13.27. Machine has twin screws, each with diameter 130 mm. Working length LD = 27. Extruder is driven by el. motor 145 kW. Barrel has 12 heating zones, each with el. heaters 5.5 kW. Includes Transi-Tec mixing and dosing device and unused spare barrel. - Calibrating table by Techno-Plast with 4 pcs of vacuum pumps (each power 4 kW) and one blower with power 1.1 kW. - Pull-off with a saw by Techno-Plast, driven with motor 5.7 kW - Profile collection table - Vacuum pump (Busch) - ONI water cooling exchanger Line new in 2010.

Key data: 57900 KW, 11000 V

Diesel Power Plant MAN 57.9 MW / 50 Hz – year 2014 This diesel power plant consists of three identical 19.3 MW MAN 18V48/60 TS diesel generating units with auxiliaries. The engines are 500 rpm turbo charged with intercooling and they are installed on base frame forming a wet oil sump for engines. Diesel generators have been operated only approx. 5000 hours since new. Alternators are ABB made synchronous generators which are air-cooled, and they have their own lubrication oil system installed on concrete foundation and connected to the engines with flexible couplings. Engines are cooled with two separate cooling circuits connected to radiator cooling system. The control system is MAN SaCoS One. 11 kV breakers are Siemens SF6 type. The plant is still installed and fully operational and in good technical condition. Main technical data Manufacturer MAN Augsburg, Germany Manufa ...

CNC unit for boring, routing and sawing Brand: Atemag Type: Function Line Duo With two tool interfaces, angle 90° Max. drive speed 10,000 R.P.M. Max. tool spindle speed 15,000 R.P.M Gear ratio i = 1:1,5 Turning direction left/right Torque max. 20 Nm Tool interfaces: ER25, ER 32, saw blade flange 30 mm, sawblade dia. max. 180 mm or modular

Automatic dough divider and rounder Fortuna Automat A3-30 is a reliable and efficient solution for fast and precise dividing and rounding of dough. This machine processes up to 30 dough pieces per cycle, significantly improving production efficiency and ensuring consistent results. The dough weight range of 32 to 70 g allows flexibility for various bakery products. The machine is equipped with three plates and an automatic head tilting function, making operation easier and increasing productivity. Robust construction and high-quality manufacturing ensure stable operation, long service life and easy maintenance, making this machine ideal for professional use. Technical specifications: Manufacturer: Fortuna Model: Automat A3-30 Machine type: Automatic dough divider and rounder Capacity: 30 pieces per cycle Dough weight range: 32 – 70 g Number of plates: 3 Functions: Automatic h ...

Key data: 4000 KW, 11000 V

Diesel Generator Niigata 4 MWe / 50 Hz HFO Never Installed Never used medium speed Niigata HFO / Diesel fuel generator with Nishibhiba made air cooled 11 kV synchronous alternator with auxiliaries. All equipment was manufactured in year 2017 and they were never installed. Engine can run with normal diesel fuel of 180 cSt heavy fuel oil. Engine has two intercooled turbo chargers, on built lubrication fuel filter and engine driven cooling and lubrication pumps. Auxiliaries includes control panel, fuel booster unit for 180 cSt HFO, fuel oil filter, tools and spares. Delivery don’t include synchronization module and neither 11 kV breaker switch. Engine and alternator will be bolted on to a concrete foundation. Techncial characteristics Manufacturer Niigata, Japan Engine type 12V28 AHX Manufacturing year 2017 Operating hours since new Zero (only FAT) Electric ouput 4000 kWe ...

PREALPINA CDM EXTRUSION LINE 105 mm strand, loading hopper for hard plastics (possible addition of feeding screw on request), extruder with screw Ø 105 mm 35 L/D, n.1 vacuum degassing pump, d.c. motor 117 kw 400 V 3Ph.50 Hz, semi-automatic, non-stop, hydraulic screen changer, hydraulic pack, strand die, cooling bath, air drying tunnel, strand pelletizer, vibro classifier, The line is offered reconditioned, availability: 6 weeks from confirmation, options available: different cutting, different screen, upstream and downstream equipment, capacity: 400 kg/h, conditions: reconditioned with warranty, type: single screw

Very clean and brand-new 110 kVA diesel generator set in a high-quality silent canopy. Suitable for a wide range of applications including construction sites, industrial use, events, agricultural operations, backup power systems, and business continuity solutions. This generator is built in a robust sound-attenuated enclosure and delivers reliable performance under demanding conditions. Thanks to its compact design and professional finish, the unit is ready for immediate operation. Specifications Standby power: 110 kVA Prime power: 100 kVA Frequency: 50 Hz Voltage: 400/230V Speed: 1500 RPM 3-phase configuration Silent canopy / soundproof enclosure Large integrated fuel tank New condition Year of manufacture: 2025 Applications: Backup power supply Construction and infrastructure projects Agricultural sector Warehouses and workshops Events and temporary power supply ...

Very clean and brand-new 170 kVA diesel generator set in a high-quality silent canopy. Suitable for a wide range of applications including construction sites, industrial use, events, agricultural operations, backup power systems, and business continuity solutions. This generator is built in a robust sound-attenuated enclosure and delivers reliable performance under demanding conditions. Thanks to its compact design and professional finish, the unit is ready for immediate operation. Specifications Standby power: 170 kVA Prime power: 155 kVA Frequency: 50 Hz Voltage: 400/231V Speed: 1500 RPM 3-phase configuration Silent canopy / soundproof enclosure Integrated fuel tank – 380L New condition Year of manufacture: 2026 Applications Backup power supply Construction and infrastructure projects Agricultural sector Warehouses and workshops Events and temporary power supp ...

ACME 8 Dough Sheeter Model 8 115V Includes: 9' and 12" Plates, Light and Heavy Moulding Chains Full Refurbished All New: Bearings, Belt, Drive Belt, Idler Gears, Molding Rails, Paint

The Rondo SSO 617 reversible dough sheeter is a high-quality commercial kitchen equipment designed for rolling and cutting dough in a professional setting. This durable and reliable machine from the trusted brand Rondo is specifically built for restaurant and food service establishments, making it a valuable addition to any baking and dough equipment collection.

Cleaned and tested, it has new belts and new scrapers overall in perfect condition.

The AM Manufacturing S300 Scale-O-Matic Combination Dough Divider Rounder is a commercial kitchen equipment designed for baking and dough preparation. This electric floor model, made in the United States by AM Manufacturing, combines dough dividing and rounding capabilities in a single machine. Perfect for restaurants and food service establishments, this product efficiently helps in creating consistent and precise dough portions for various baking needs. Comes complete and in great condition.

A Haffner double mitre saw with robust construction is available. Saw units: 2, indexing positions: 90°/45°/22.5°, unit inclination: 45°, saw blade diameter: 330mm, motor power: 1.1kW, max. cutting length: 3000mm, max. cutting width: 130mm, max. cutting height: 120mm. An on-site inspection is possible.

Complete, well-preserved log yard. Completely inclusive round timber feed for short and long logs, with long timber cutting and sorting, log turner, metal detector, debarking system Esterer ER 90, Bruks root reducer, and sorting line, very robustly built. Complete disposal and including the complete steel substructure and all cabling up to the switchgear. Complete control system as well as operating cab with operator station as a container solution. Simply complete Dismantling on your own

0.5 KW 380 V 16 A Discs D 200 mm Swivelling sanding pads Length 0.30 m Width 0.78 m Height 1.10 m Weight 40 kg Color: Green

1.2 HP 0.9 KW 380 V 16 A 2900 rpm Discs D 200 mm Swivelling sanding pads Coolant Setup Length 0.52 m Width 0.90 m Height 1.20 m Color: Green Weight 50 kg

The drying/conveying system for plastics - Piovan DP615 The drying/conveying system for plastics with 2 molecular sieves, 3 silos Warm air generator with a doubled molecular sieve Sieves work alternately, during the drying process, one sieve works and the second sieve regenerates Silos are hermetically insulated, with a capacity of 150 liters, with their own control system Silos can work separately and independently with different materials and temperatures. Silos have a heating and temperature maintenance function 3x Piovan Easy3 vacuum conveyors

A CNC radial drilling machine overhauled in 2018 is offered. Working range X/Y: 1050mm/1800mm, drilling capacity steel: 40mm, drilling capacity cast iron: 50mm, thread cutting: M36-M45, tool holder: SK40, speed range: 15rpm-2800rpm, quill stroke Z: 200mm, column stroke W: 410mm, table clamping surface X/Y: 1800mm/600mm, feed speed: 5mm/min-2000mm/min, rapid traverse X/Y: 7.5m/min, control: CNC control. Equipped with 360° swivel device, motorized tool clamping, three-jaw chuck for round parts, modernized LCD monitor, extensive tooling package. Weight: approx. 2900kg, overall dimensions X/Y/Z: approx. 2600mm/1900mm/2950mm. Inspection possible by arrangement.

Display Diane PP450.0571-K01 | Jenbacher original 541065 - NEW OPTIONAL ITEM: Interface card 3IF779.9 B&R -Jenbacher original 442076 - NEW = 740,00 €

Glass scale, glass measuring rod, scale, digital display, measuring rod, length measuring system, length measuring device, linear scale, positioning display, digital scales, digital scale for digital display -Manufacturer: Heidenhain, Digital scale -Type: LS 703 ML 1140 mm -Id.No.: 216 750 15 -Quantity: 1x length measuring device available -Dimensions: 1305/80/H45 mm -Weight: 2.5 kg

Glass scale, glass measuring rod, scale, digital display, measuring rod, length measuring system, length measuring device, linear scale, positioning display, digital scales, digital scale for digital display -Manufacturer: Heidenhain, Digital scale -Type: LS 703 ML 520 mm -Id.No.: 216 750 08 -Quantity: 1x length measuring device available -Dimensions: 680/80/H45 mm -Weight: 1.7 kg

Dough dividing machine Benier Doughmaster Year of Make: 2009 Number of chambers: 5 Weight range: approx. 170 to 840 g Hourly output: approx. 8000 pieces Siemens Touch Control Motorized weight adjustment

Biscuit dosing machines Comas DLV 450 Year of Make: 2008 Condition: very good Siemens control system Working width: 450 mm

Dosing unit Gorreri DVG 500 Year of Make: 2011 Condition: functional Suitable for filling, spraying or decorating various types of products from doughs, creams, jams and other liquid products Output: max. 40 strokes per min Compressed air: 250 l/min (6 bar) Dimensions LxWxH: 1200 x 600 x 1850 mm Weight: 80 kg

Double spiral mixer DIOSNA, type: DSP 300 AF -In very good condition- - Extendable dough bowls for a maximum of 300 kg of dough or 185 kg of flour - A total of 8 tank cars are available - Condition: very good used condition - Dough bowl size: for 300 kg of dough or 185 kg of flour - El. Connection: 50 Hz, 400 V, 49.2 kW, 90 A Viewing and test run are possible.

Lifting kneader in stainless steel version DIOSNA, type: S 35 -In good used condition- - for 35 kg dough - Footswitch - with protective grille - Technically everything tested and cleaned - Machine runs very smoothly - Good condition - a video can be sent - Weight: approx. 250 kg - El. Connection: 380 V, 50 Hz Visits and test runs are possible.

General SKU241P262 LocationBarneveld MakeLEWA TypeLCA Pressure Working pressure30 Bar Main Features MaterialStainless steel Volume3.33 Ltr. Motor0.18 KW Specified Features - Dosing pump Pump:ecosmart diaphragm metering pump: Capacity3,33 Ltr/h With motor0.18 KW, 230/400 Volt (EX II2G c IIC T1-T4) With variable speed drivecheck Inletdia.8mm Outletdia.8mm General Mach.No.533537-010.002 Year of construction2011 Floorspace0,4 x 0,3 M Total height0,5 M Weight30 KG Extra SpecificationsPistondia.6mmDosing pumpsFood additivesLewaPumps > Dosing pumpsIndustries > Food & Feed > Food additivesBrand > Lewa What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more ma ...

Lifting mixer DIOSNA, type: S120 -In good condition- - for 120 kg rye dough and 90 kg wheat dough or 75 kg rye flour and 58 kg wheat flour - With foot switch - Protective grille - Machine has wheels and is drivable - Condition: technically good, everything checked - The machine runs very smoothly - We are happy to send a video - Ready for immediate use Visits and test runs are possible.

Spiral mixer DIOSNA, type: SP 24 -Very good condition- - Kneader suitable for up to 24 kg dough - With timer - 2 speeds - Rideable - El. Connection: 380 V, 3ph, 50 Hz, 6 A - Condition: Very good, ready to use - Very smooth running Inspection and test run are of course possible by arrangement.

Key data: 1844 KW, 2300 kVA, 400 V

Deutz MWM Diesel Emergency Power Unit TBD 620 V16 Diesel generator from 1997, 1,157 operating hours, Engine has leaks. With control, soundproof hood and table cooler. 1,600 KWel x 1,500 rpm, 6,000 V/50 Hz. AC Generator: Leroy Somer LSA 51 L8-4P, 2,000 KVA Manufacturer: Deutz MWM Model: TBD 620 V16 Type: Emergency Power Diesel Serial Number: S28 16 001053 Capacity [KVA]: 2,300 Power [KW]: 1,844 Power [KWel]: 1,600 Year of Make: 1997 Hours: 1,157 AC Generator Leroy Somer LSA 51 L8-4P Manufacturer: Leroy Somer Model: LSA 51 L8-4P Type: AC Synchronous Generator Serial number: 165071-1 Power [KVA]: 2,000 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 2.886 Speed [1/min]: 1,500 Year of Make: 1997 Weight [kg]: 4.270

For sale Doosan Multi Task CNC turning center type MX2100LST with a Fanuc 31i-A controller. This Doosan MX2100LST is a high-quality, multifunctional 9-axis CNC turning/milling center. The machine combines the functions of a CNC turning and machining centre in a single clamping (turning-milling). Capacity & Working Area Maximum turning diameter: 540 mm Maximum turning length: 1,540 mm Maximum diameter over bed: 750 mm Maximum diameter over thrust axis: 650 mm Spindles (main and counter spindle) Both spindles offer identical performance and thus enable the symmetrical transfer and machining of workpieces: Lift Plate Size: 8 inches (optional 10 inches) Maximum speed: 5,000 rpm Spindle motor power: 22 kW Spindle bore / Maximum rod diameter: 65 mm. C-axis resolution: 0.001 degrees (on both spindles) Milling spindle (B-axis head) The upper processing head is a fully controll ...

Manufacturer: Sandvik Model: Leopard DI650i Type of Machine : DTH Surface Drill Rig UNIT 1 - Year of manufacture: 2020 - Total engine hours: 19,041 - Engine replaced | Hours on new engine: 7,700 - Drilling hours: 7,355 UNIT 2 - Year of manufacture: 2021 - Total engine hours: 18,608 - Engine replaced | Hours on new engine: approx. 5,422 - Drilling hours: 7,443 Technical Details : - Drilling method: Down-The-Hole (DTH) - Hole diameter range: 115 to 229 mm (4.5 to 9.0 in.) - DTH hammer: Sandvik RH570 (4, 5 and 6 in.) - Flushing air capacity: 28.3 m3/min at 24 bar - Drill rod/tube diameter: 89, 102, 114, 127 and 140 mm (3.5, 4, 4.5, 5 and 5.5 in.) - Rotary head: MRH6 - Engine type: Caterpillar C15 (Tier 3 / Stage 5, Tier 4F) - Engine output power: 403 kW at 1,800 rpm - Cabin: iCab - Production capacity: 2.1 Mt/a (one shift) - Transport height: 3.5 m (11.5 ft) - Weight: 25,100 kg (55, ...

Manufacturer: Epiroc Model: FlexiRoc D65 Type of Machine : DTH Surface Drill Rig UNIT 1 - Year of manufacture: 2019 - Total engine hours: 29,346 - Engine replaced | Hours on new engine: 10,288 - Drilling hours: 10,523 UNIT 2 - Year of manufacture: 2020 - Total engine hours: 26,274 - Engine replaced | Hours on new engine: 8,967 - Drilling hours: 10,000 UNIT 3 - Year of manufacture: 2020 - Total engine hours: 25,005 - Engine replaced | Hours on new engine: approx. 6,500 - Drilling hours: 9,372 Find more here - .ucymachines/ Contact us at - sales@ucymachines

Standard: IEC 34-1, rated power: 114.7kW, rated speed: 1,885rpm, duty type: S1 (continuous duty), insulation class: H-RISE F, armature voltage (Arm.): 460V, armature current (Arm.): 271A, excitation voltage (Exc.): 340V, excitation current (Exc.): 5.43A, protection class: IP23S (drip-proof, open ventilated), cooling: IC06 (forced ventilation by mounted fan), mounting arrangement: IM1001 (B3 foot-mounted design), weight: 455kg, standardized dimensions (IEC frame size 180), shaft height (H): 180mm, foot mounting hole spacing width (A): 279mm, foot mounting hole spacing length (B): 279mm (L version), shaft diameter (D): 48mm (optional 55mm reinforced version), shaft extension length (E): 110mm, mounting hole diameter (K): 15mm, CE marking available. An on-site inspection is possible.

Clamping force: 3150kN, opening force: 10,000daN, closing stroke: 500mm, ejector force/retraction force: 159/82kN, ejector stroke: 120mm, mould height: 300-700mm, platen dimensions: 900x900mm, tie bar spacing: 550x550mm, tie bar diameter: 110mm, injection position: 0/-80/-160mm, max. injection force: 350kN, injection stroke: 430mm, injection plunger diameter: 50/60/70/80mm, shot volume: 563/811/1103/1441cm³, specific injection pressure: 1783/1238/909/696daN/cm², corresponding projected area: 177/254/347/453cm², max. projected area: 1050cm² at 300daN/cm², operating pressure: 140bar, dry cycle time (DIN 24480): 500, drive motor: 22kW, control: Datacontrol, length: 6900mm, width: 2000mm, height: 2800mm, weight: 14t, operating hours: 77,185h, shot count: at least 1,147,108, however not guaranteed due to a hardware replacement, adjustable opening stroke, with Striko Westofen W455 holding ...

hobbing length: 1750 mm milling width: 260 mm max. module: 10 mm table size incl. water gutter: 460 x 2100 mm table clamping surface:: 250 x 1850 mm cutter width - max.: 100 mm feed of the milling slide, stepless: 0 - 500 mm/min. rapid traverse feeds: 3000 mm/min milling head -swivable +/-: 30 ° Rotation speed range of milling head, in 9 steps: 29 - 178 rpm Milling head swivable 2 sides helical gearcutting: 30 ° total power requirement: kW weight of the machine ca.: 4 t dimensions of the machine ca.: 4 x 1,85 x 1,85 m Equipment/accessories - 7 vices - change wheels - Clamping devices - Documentation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Gildemeister GMX 250S Linear Turning/Milling Center CNC Cover Maho DMG Hersteller [manufacturer]: Gildemeister Deckel Maho DMG Type [ type]: GMX 250S Linear Control [control unit]: Heidenhain Plus IT 3D CNC Pliot 4290 plus it Baujahr[construction year]: 12/2008 the premier class of turning and milling! Important key data of the GMX 250S Linear: • 7 Axis Turn-Mill Center • Main and counter spindle • B-axis up to 240° • Milling spindle up to 12,000 rpm • Tool magazine up to 80 places • Siemens 840D or Heidenhain control • Linear actuators for high dynamics and accuracy • Machining diameter approx. 520–640 mm • Turning length up to approx. 1,185 mm Typical equipment: • Y-axis • Powered tools • Bar feeder • High-pressure cooling • Probes • Chip conveyor • HSK-A63 milling spindle • Sub-spindle for complete machinin ...

The Florin Mini Compact Dryer is a compact drying system for applications where residual moisture must be removed or products must be blown off specifically. The system was developed as an energy-efficient alternative to classic compressed-air blow-offs and operates without a compressed-air supply., Typical application areas are blowing off coded surfaces before labeling, removal of residual moisture after washing or filling processes, drying of closures, cap feeding, and ejection of empty bottles. The compact design allows the system to be integrated into existing production lines even in confined spaces., With a power consumption of up to 180 watts and an air flow rate of 52 m³/h, the Mini Compact Dryer offers an energy-efficient solution for numerous applications in the beverage, food, and packaging industries. The IP67 protection rating enables use in demanding production environmen ...

Vibration damper, compensator, damper, expansion compensator, expansion piece, axial compensators, rubber expansion compensator, rubber compensator, rubber compensator -Manufacturer: Elaflex, rubber compensator -Type: ERV-DN125 PN16 -Nominal diameter: Ø 120 mm -Material: Bellows rubber -Bolt circle: Ø 210 / 19 mm -Number: 2x compensators available -Price: per piece -Dimensions: Ø 252 x 130 mm -Weight: 8.7 kg/pc.

Vibration damper, compensator, damper, expansion compensator, expansion piece, axial compensators, rubber expansion compensator, rubber compensator, rubber compensator -Manufacturer: Elaflex, rubber compensator -Type: DN200 PN16 BL 160 -Nominal diameter: Ø 200 mm -Material: Bellows rubber -Bolt circle: Ø 295 / 22 mm -Number: 5x compensators available -Price: per piece -Dimensions: Ø 340 x 150 mm -Weight: 19.4 kg/pc.

Vibration damper, compensator, damper, expansion compensator, expansion piece, axial compensators, rubber expansion compensator, rubber compensator, rubber compensator -Manufacturer: Elaflex, rubber compensator -Type: ERV-DN65 PN16 -Nominal diameter: Ø 60 mm -Material: Bellows rubber -Bolt circle: Ø 145 / 18 mm -Number: 2x compensators available -Price: per piece -Dimensions: Ø 185 x 125 mm -Weight: 4.8 kg/pc.

Overview  This semi-automatic new glass pusher was built in 2017 by the German manufacturer Alwid. The machine is professionally stored and can be viewed in person at any time. Technical details Semi-automatic new glass pusher with interchangeable gripper units 4 heads: adjustable depending on the layer pattern ALWID FEEDING TABLE + ALWID DEPALLETIZER

General SKU312X492 MakeALLGAIER PROCESS TECHNOLOGY GmbH TypeWS-R-V-T-2.80-0.50-0.30 No.380 Year of construction2013 LocationBarneveld Main Features MaterialStainless steel Motor11 KW Surface0.75 m2 Specified Features - Fluid bed dryer continuous Continuous fluidbed dryerContinuous operation, pressure/suction mode Surface0,75 m² Bed sizes300 x 2500 mm Product inletø 150 Product outletø 200 Number of sections:3 Air inlet2x ø 400: 2x ø 80 (warm air blending) Air outlet3x ø 250 Vibro motorcheck Motor11 kW (400 V 1475/477 rpm) With variable speed drivecheck With fancheck Motorcheck Capacity500 kg/h wet product With cyclonecheck Heating unit (oil)(Thermal oil: Heat Exchanger) Max. temperatureApprox. 170 °C: inlet air MaterialStainless steel 1.4301 (304) General Mounted on mild steel framecheck Floorspace3,9 x 2,25 m Total height2,9 m CEcheck Extra Spe ...

General SKU327W690 MakeDrais Mannheim LocationBarneveld TypeTR400 E PS EMS 180 Pressure Working pressure40 Bar Vacuum possiblecheck Working pressure jacket6 Bar Vacuum possible jacketcheck Technical specs Max. temperature165 °C Main Features MaterialStainless steel Volume540 Ltr. Specified Features - Paddle dryer Paddle dryercheck Capacity550 l (netto 400 l ) Trough sizes± 700x800 mm Manholedia. 700 mm OutletDN125 With jacket29 l Max. temperature165°C With mechanical sealcheck Motorcheck Speed mixing shaft45-135 rpm With lump breaker1500 rpm Motorcheck MaterialStainless steel With jacketcheck General No.5700 Year of construction1998 Floorspace3,1 x1,9 m Total height3,2 m Weight5800 kg Extra SpecificationsShaft seal: double-acting mechanical sealsHeating/cooling double jacket (max. 6 bar) and head condenser (vapor dome)Paddle dryersFood additivesDra ...

Travel X/Y/Z: 380mm/280mm/300mm, working dimensions X/Y/Z: 580mm/450mm/340mm, max. electrode weight: 50kg. Machine dimensions X/Y/Z: approx. 2100mm/1650mm/1750mm, weight: approx. 3500kg. An on-site inspection is possible.

Spiral mixer with extendable tank wagon DIOSNA, type: SP 200 AF -In bakery condition- - Digital control - for 200 kg of dough and 125 kg of flour - El. Connection: 400 V, 50 Hz, 12.7 kW, 33 A - Several tank cars available There are 4 machines available. Inspection and test run possible.