perske d used for sale

Cutting depth:70 mm engine output:12.4 A, 220/380 V , 2 x 6 kW working length:2500 mm dimensions of the machine ca.:3900 x 1100 x 1000 mm weight:1500 kg

turning diameter over bed:3800 mm turning diameter over slide rest:3200 mm turning length:12000 mm faceplate turning speed range -stepless-:2 - 200 U/min max. workpiece weight:90.000 kg bed width:4000 mm 2 steadies

Printing technology: piezo DOD printheads: Xaar 1001, resolution: 720x360dpi, drying: 1xUV GOZ and 1xUV FOZ Höhnle with 7,2kW, pinning system (LED) after printing unit 1+5, extraction: in the drying unit for cooling the UV lamps and for odor minimization and improvement of sensory conditions, inert gas system: oxygen-reduced curing unit (inert gas system), consumption: under 6m³/h, printing: roll-to-roll, web width: 350mm, print width: 330mm, repeat length: min./max. printable section length 10-1000mm, print tolerance: single spacing +/-0,2mm, cumulative spacing: +/-1,5mm (over one meter), register: register accuracy +/-50μm, max. speed: 48m/min with 4 colors depending on ink coverage, white at 30m/min, speed must be preselected from 18 to 48m/min, print pre-treatment: corona with 1500VA, web cleaning: polymer rollers LC 350, air shafts: for cores with 76mm diameter for unwinding and  ...

; Gross weight [kg]: 14250; Engine: Caterpillar 3512B

Offered is a rapid radial/column drilling machine. Drilling capacity: up to approx. Ø50mm. Speed range: 58-1275rpm. Thread cutting device: available, outreach: 920mm, machine lamp: available, baseplate/table size X/Y: approx. 1100mm/400mm, T-slots: 2 at the rear left, motor power: approx. 1.5kW without coolant system, machine weight: approx. 1200kg. Inspection under power by arrangement possible.

Dimensions (L/W/H): 1300x1100x1350 mm Weight: 500 kg Total power requirement: 3,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1200x930x1080 mm Weight: 390 kg Total power requirement: 1,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 1300x800x1350 mm Weight: 370 kg Total power requirement: 0 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Reference Num.: 4168 Brand: Xerox Type: D136 Construction year: 2014 Impressions: 11 mio Available: directly Status: In production Location: Deutschland Equipment: - Doppelbogenkontrolle - Duplexdruck

Operating pressure: 500 bar, Year of construction 2019 Flow rate: 15 l/min, hot water, Drive: Deutz Diesel 15 kW, Operating hours: approx.: 195 h, Trailer incl. accessories, HD pistol + lance

Boge DS2-DS30 Diesel-oil (1) -- Naphte (2) -- Electr (3): Elektr Max output: 10 bar voltage: 3 x 400V Volume flow rate: 0,50–0,54 m³/min Power imput: 4 kW Length: 480 mm Width: 907 mm Height: 955 mm Weight: 200 kg

The T 4.40 DSK is an oil-free combined pressure/vacuum pump for blowing and suction air. It is a robust and durable pump that is designed for continuous operation. This dry-running positive displacement pump works with self-lubricating gate valves made of a graphite composite and requires minimal maintenance. Volume flow 50 Hz 35 m³/h Pressure/vacuum relative 50 Hz ±0.6 bar Power 50 Hz 1.85 kW Sound level 50 Hz 68 dB(A) Volume flow 60 Hz 43 m³/h Pressure/vacuum relative 60 Hz ±0.6 bar Power 60 Hz 2.2 kW Sound level 60 Hz 68 dB(A) Weight 46... 49.5 kg with motor

Arburg A10VSO 18 DFR1/31R-VRA12KB2-S2761 Rexroth Axialkolbenpumpe Hydraulikpumpe Hersteller: Arburg / Rexroth Teilenummer: MNR: R902475215 Type: A10VSO 18 DFR1/31R-VRA12KB2-S2761 Anwendung: Ersatzteil für Spritzgussmaschinen Zustand: gebraucht, geprüft, voll funktionsfähig Referenznummer: 3100218

Amut Vertical centrifugal dryer under refurbishing, mm.400 rotor diameter,, length mm.1.900 mm.,, 120 mm.long paddles on the whole length,, AISI 304 steel basket from diam.mm.650,, height : 1.975 mm., mm.3,0 holes,, self-cleaning system through water sprays., Rolling type bearings., 55 kw, 1.550 tpm engine., About 1.000 kg./hr. with film and depending on material and water content (less with LLDPE, more with rigid plastics), Construction year 1998., Machine is offered totally reconditioned, feeding auger and discharging cyclon are included in this offer, See how a similar machine was refurbished, [here](.germanplast/pages/photo-gallery#&gid=1&pid=2), installed power - used power in work: about 60-65% : 55 kW, availability: 5 weeks ca, options available: loading auger à discharging cyclon, capacity: 1.000 kg/h depending on material and water %, conditions: reconditioned with warranty, ty ...

Manufacturer: ESC Model: Continuous Dryer Perfecton S with UV Year of Manufacture: 2020 Technical Specifications Heating Chamber 80°C - Galvanized nozzle plate - Process fan: TRZ 250-3 - Indirect air intake from process room - Recirculated air volume: 3,400 m³/h at 510 Pa - RRH heating register: 18 kW at max. 80°C - Drive motor: 2.2 kW / B3 / 1,410 rpm / insulation class F - Length: 2,000 mm Cooling Chamber - Process fan: TRE 250-3 - Supply and exhaust air volume: 3,400 m³/h at 800 Pa - Stainless steel drip tray for process fan - Drive motor: 2.2 kW / B3 / 1,500 rpm / insulation class F - Without cooling register and refrigeration unit - Length: 2,000 mm Discharge Element - Steel drive roller with rubber coating - Mounting for belt drive - Length: 500 mm Construction Details - All hoods and cladding panels made of electrolytically galvanized steel sheet - Heating chamber h ...

Manufacturer: ESC Model: Continuous Dryer Perfecton S Year of Manufacture: 2021 Technical Specifications Heating Chamber 80°C - Galvanized nozzle plate - Process fan TRZ 250-3 - Indirect air intake from process room - Air circulation volume: 3,400 m³/h at 510 Pa - Electric heating register: 18 kW at max. 80°C - Drive motor: 2.2 kW / B3 / 1,410 rpm / ISO F - Length: 2,000 mm Cooling Chamber - Process fan TRE 250-3 - Supply and exhaust air volume: 3,400 m³/h at 800 Pa - Stainless steel drip tray for process fan - Drive motor: 2.2 kW / B3 / 1,500 rpm / ISO F - Without cooling register and chiller - Length: 2,000 mm Discharge Element - Rubber-coated steel drive roller - Mounting for belt drive - Length: 500 mm General Construction - All hoods and cladding panels made of electro-galvanized steel sheet - Heating chamber hoods are insulated DIMENSIONS - Belt width: 1,700 mm - B ...

Dissolver Drais RSV 19.1 Power 14.5 kW Speed range 0-1850 1/min Complete with control cabinet Very good ready-to-use condition, straight from production

Caterpillar 3516 Diesel Generator Set – CAT 3516-DITA Manufacturer: Caterpillar Generator Set Type: Diesel Generator Set Engine Model: CAT 3516-DITA Alternator: Caterpillar SR4B Year of Manufacture: 1995 Engine Serial Number: 25Z04872 Arrangement Number: 107-7350 Frequency: 50 Hz Phase: 3 Phase Speed: 1500 RPM Duty: Suitable for Prime / Standby / Continuous applications Condition: Used – fully serviceable and suitable for immediate deployment This Caterpillar 3516-DITA diesel generator set is a robust, industrial-grade power solution built around Caterpillar’s proven V16 engine platform. Manufactured in 1995, the unit features a non-electronic mechanical control system, making it especially attractive for applications where reliability, simplicity, and ease of maintenance are critical. Coupled with a Caterpillar SR4B alternator, this ge ...

Dissolver Pendraulik Disperlux LD 50 Explosion-proof design Power 0.37 kW Speed range 930-9400 1/min Toothed pulley 50 mm

Dissolver ATP Dispermill LD 50 Explosion-proof design Power 0.37 kW Speed range 930-8400 1/min Toothed pulley 50 mm Very good condition, straight from the production

We are offering for sale 3 Drying Chambers manufactured by Trockenkammer Lauber /Mühlböck Industrial drying chamber system with 3 chambers. Each chamber has a gross stack volume of 162 m³. Hot water heating with 780 kW heating capacity per chamber, operating at 95 °C flow temperature. Water flow rate 45 m³/h, DN100 connections. Equipped with circulation and exhaust/fresh air fans. Suitable for high-capacity industrial drying applications.. Chamber 1 Manufacturer: Trockenkammer Lauber /Mühlböck Wood Drying System Model: ZLSM 2120-3120-1252-11-0606-5.0 Year of Manufacture: 2012 Type of Machine : Wood Drying System Heating capacity : 410 kW Maximum flow temperature : 95 °C Water flow rate : 24 m³/h Pressure loss : 3 mWS Electrical supply voltage: 230 / 400 V Installed electrical power : 28 kW Fans : 7 units, 3.0 kW each Chamber 2 Manufacturer: Trockenkammer Lauber /M ...

Engine Brand: JOHN DEERE, Condition: USED, Engine Cooling Type: External Exchanger (eg. Keel Cooled) , Engine Color: White , Engine Condition: Used , Exhaust System: Watercooled , Starter Voltage: 24 Volt , Rated Power: 75 Kw, Rated Speed: 1800 Rpm, Generator KVA: 75 , Generator Hz: 60 , Generator Fases: 3 Fases + Nul (4 totaal) , , https://www.hamofa.com/stock/generators/john-deere-4045tf120-generator -60-kva-used/42277, , = More information =, , Type number: 4045TF120 GENERATOR 60 KVA

Spindle-to-table distance min./max.: 81mm/481mm, counter support spindle center distance: 195mm, spindle head swivel: 360°, milling spindle diameter: 70mm, spindle adjustment: 100mm, headstock adjustment: 300mm, table dimensions X/Y: 480mm/820mm, travel X/Y/Z: 500mm/200mm/400mm, max. workpiece length: 400mm, spindle speed: 1600rpm, feed X/Y: 500mm/min, feed Z: 250mm/min, spindle head swivel: +/-30°, machine dimensions X/Y/Z: approx. 1600mm/2550mm/1700mm, weight: approx. 2300kg. The machine was electrically tested at the end of 2025 and a defect of the emergency stop switch was discovered. Documentation available. On-site inspection is possible.

Holac Industrial Dicing Machine – VA Series (VA 90 / VA 120), Manufacturer: Holac, Type: Industrial Dicing / Cubing Machine, Model: VA Series (exact model to be confirmed), Availability: Direct, Description, This Holac industrial dicing machine is designed for high-capacity and precise cutting of a wide range of food products. The machine is equipped with a robust worm feed system, ensuring consistent product flow and uniform cutting results., Suitable for cutting products into cubes, strips or slices, depending on the installed knife set. Ideal for meat, cheese, vegetables and plant-based products., The machine is fully stainless steel, hygienically designed and easy to clean. Equipped with an original Holac Panelware control panel., Key Features, - High-capacity industrial dicing machine, - Continuous worm feed system, - Interchangeable knife grids for different cutting sizes, - Suit ...

Width 76 cm Year of construction 2009 Mobile stacking delivery for marking-free laying Banding display with max. 3 panels Vibrating device Pressing station max. infeed width 760 mm - 1 panel max. infeed width 235 mm - 3 panels Small format device for stacking height 3 - 20 mm Output up to 600 stacks / h Steel / HD - Interface / Interface Price on request. Worldwide delivery & installation.

The Kinsley Extruder & Dough Machine Pretzel Stringer KPM W0-9288-1 Model 985.612F is a commercial-grade baking and dough equipment designed for restaurant and food service establishments. This electric-powered floor model features a unique design for creating pretzel strings with ease and efficiency. With the trusted Kinsley brand, this dough machine is ideal for professional bakeries looking to streamline their production process and produce high-quality baked goods.

Dissolver VMA Getzmann Dispermat LC 30 Power 0.3 kW Speed range 0-20000 1/min Toothed pulley 50 mm Accessories on request Very good condition, straight from production

2 units and 1 large drying cabin made of stainless steel incl. piping, for gentle drying of food (herbs, tea, wheatgrass), low-temperature drying. Drying below 40°C, only permitted for indoor use. Very solidly built. Dimensions: Aggregates - 1.95 x 1.25 x 2.00 m, Drying cabin: 7.40 x 2.67 x 2.50 m, Stainless steel: 1.4301 Aggregate 1 : Built in 2012, Aggregate 2 : Built in 2014, Drying cab: Built in 2015. The Blue Evolution XL steam cleaning device from Beam can also be purchased. We will be happy to send you the data sheet. Price VB

REF-2563 METTLER TOLEDO SAFELINE METAL DETECTOR WITH REJECT SYSTEM Model: Signature. Year: 1999. Aperture: width 500 mm, height 350 mm. Overall dimensions: width 1,500 mm, length 3,200 mm, height 1,250 mm. OTHER SAFELINE MODELS ARE ALSO AVAILABLE. INQUIRE FOR MORE INFORMATION.

compressor air refrigeration dryer air dryer Brand: KAESER TE141 Year of manufacture: 2013 Motor voltage Pgebmsyfpbtsrc H Dlsg 400V/50Hz 3 phases 4.5 a/min Max. pressure: 16.00 bar Delivery capacity 14.32 m3/min Operating pressure max: 16bar Refrigerant: R134A 2.1kg Air-cooled dryer Refrigeration dryer Connection: Compressed air G2 (internal thread) Connection: Condensate drain: DN10 Dimensions: Length: 1530mm Width: 1060mm Height: 1513mm Weight: 660

- Rheon dough weigher - Twin Divider 400 VX202 - Year of construction 2004

ILLIG RDM70K Mold, dia. Ø70 mm, for PP Cups, 21 Cavities, age 1995, with 1 set of inserts and Stacker basket with Rods with Brushes. Missing engraved Cup bottom discs, as these are the intellectual property of the previous owner.

: 6000 kg length: 3000 mm width: 1600 mm height: 570 mm : fest : lenkbar size of tyres: 406 x 127 mm weight of the machine ca.: t dimensions of the machine ca.: 3,99 x 1600 x 570 mm Heavy-duty trailer with - turntable steering - robust, low maintenance - 30mm impregnated wooden platform - Standard paint finish varies. Available in your RAL color upon request. Need other load capacities and dimensions? Please contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

inner diam. 350 mm.

Dissolver Pendraulik Disperlux IP green 037 Power 0.37 kW Speed range 0-12000 1/min Very good ready-to-use condition, straight from production

Manufacturer: DONAU Model: DR 50 Find more here - .ucymachines/ Contact us at - sales@ucymachines

cutting width: 3.400 mm Motor output: 2 x 1,1 kw kW weight of the machine ca.: ca. 400 kg saw blade diameter: 330 mm swivellable: -45, 90, +45 ° : 45, 90 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Plant for the production of caustic soda PROMINENT SYSTEMS Tank and dosing system for cleaning systems in the food sector, such as bottling plants - Storage tank DVS 2205 made of PE-100 - Fall arrester - Dosing system - Container diameter: 1,640 mm - Container height: 2,000 mm - Net volume: 4 m³ - Everything regularly maintained and TÜV tested - Condition: Mint Viewing by arrangement

PP-Drinking Cup Mold for ILLIG RDM75Kc, manufactured by TERMOSTAMPI, age 2022 with Inmold Forming and Trimmimg, for PP-Cups Ø98 mm dia. for the ILLIG RDM 75Kc, consists of:, 24 cavities (6 x 4 arrangement), complete with Trimming Knives, Cavity Inserts, Ejectors, Down Holders., and 4 series of inserts for the following PP drinking cups:-, 24 oz, 20 oz, 16 oz, 12/ 14 oz, Complete with Stacker Parts for the ILLIG PH75 counter/ stacker

A Datron dosing and dispensing system for adhesive and sealing materials is available. Design: gantry design, Y-axis drive: double-sided, travel X/Y/Z: 520mm/650mm/240mm, gantry clearance: 200mm, dosing and positioning speed: 16m/min, repeatability: +/-0.02mm. Machine dimensions X/Y/Z: approx. 1300mm/1300mm/1950mm, weight: approx. 600kg. Documentation available. On-site inspection is possible.

quantity: 1 STK -> 117015.16128 -> R1=600/2.9 -> KR=0°15/2.0 -> m=0.9-1.6/18.5 -> DP=28-16 Various diamond dressing wheels from Fässler available. Application: Dressing grinding wheels / precision machining Price per piece, discount for multiple purchases The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

quantity: 1 STK -> 116710.15664 -> R1=2000/2.5 -> m=1.4-2.5/17.5° -> DP=18-10 Various diamond dressing wheels from Fässler available. Application: Dressing grinding wheels / precision machining Price per piece, discount for multiple purchases The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

quantity: 1 STK -> 80018.16854 -> R1=550/5.0 -> m=1.5-5.0/18° -> DP=17-5 Verschiedene Diamant-Abrichtscheiben von Fässler verfügbar. Anwendung: Abrichten von Schleifscheiben / Präzisionsbearbeitung Preis pro Stück, bei Mehrabnahme Rabatt The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

quantity: 1 STK -> 80018.15979 -> R1=320/5.0 -> m=1.5-5.0/18° -> DP=17-5 Various diamond dressing wheels from Fässler available. Application: Dressing grinding wheels / precision machining Price per piece, discount for multiple purchases The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

quantity: 2 STK -> 116924.15833 -> R1=1500/4.6 -> KR=0°08/3.2 -> m=1.0-3.0/17.5° -> DP=25-8.5 Various diamond dressing wheels from Fässler available. Application: Dressing grinding wheels / precision machining Discount for multiple purchases The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Paper drill Dürselen Corta PB 04 N; very good condition; cleaned and tested; 4 drill heads; Drilling lubrication and cooling; Speed regulation; speed table stroke adjustable; max. Stacking height 50mm; insertion depth behind drill 42mm; Sliding table; Hole spacing 31.7-293mm; Endless drilling belt. Paper driller Dürselen Corta PB 04 N; good condition; cleaned and checked; 4 heads; lubrication and cooling system; adjustable drilling speed; adjustable table hub speed; max.pile hight 50mm; depht behind the driller 42mm; slide table; distance between the holes 31,7-293mm; Endless Drill Band.

Offered is a used Donau DR 32 rapid radial drilling machine series 731. Tool holder: MK4, spindle stroke: 200mm, outreach: approx. 900mm-1050mm, height adjustment: approx. 400-600mm, speed range: 40-2000rpm, feeds: 0.1/0.2/0.3/0.4mm per revolution, integrated coolant system, equipped with swiveling arm, large T-slot table, weight approx. 1500kg-1800kg, machine dimensions X/Y/Z approx. 1800mm/1000mm/2200mm. Inspection is possible by appointment.

General SKU210T078 LocationBarneveld MakeAlfa Laval Main Features MaterialStainless steel Motor30 KW Specified Features - Decanter Decantercheck Screw length1250 mm InletDN80 Liquid outletDN150 Solids outlet500x300 mm Motor30 kW (400 V) Hydraulic drivecheck With hydraulic unitcheck Motor0,22 kW (400 V) Max. rotor speed3150 rpm MaterialStainless steel 1.4552 General TypeSharples NX A4230 No.A91-115381 A Mounted on framecheck Floorspace2,9x1,9 m Total height2,9 m Weight2700 kgDecantersNew arrivalsAlfa LavalCentrifuges > DecantersNew arrivalsBrand > Alfa Laval What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

EOS EOSINT M280 mit Developer-Lizenz, Baujahr 2012 DMLS-Anlage für das direkte Metall-Lasersintern in gutem Gesamtzustand. Der Laser wurde gewechselt und erreicht aktuell 367,6 W bei 100 % Output (gemessen Januar 2026 mit Primes Laserleistungsmessgerät). Aufgrund der Laserleistung nur bedingt für Aluminium- und Kupferwerkstoffe geeignet. Technische Daten: Laserstunden: ca. 34.000 h (Februar 2026) Maschinenstunden: ca. 45.700 h (Februar 2026) PSW Version 3.7 200°-Heizung verbaut Keine Undichtigkeiten, geringer Gasverbrauch, O₂-Gehalt

Unused alubit grinding balls (alumina ceramic) designed for dry grinding (batch and continuous operation), available in the following sizes and quantities: 1 1/4'' (32 mm) [960 kg]; 1 3/4'' (45 mm) [1,580 kg]; 1 1/2'' (38 mm) [940 kg]; 2'' (50 mm) [410 kg]; 2 1/2'' (64 mm) [580 kg]. All balls made in Italy, packed in 25 kg bags.