perske d used for sale

- Maximum paper size: 674 mm x 365 mm - Minimum paper size: 140 mm x 148 mm - Maximum paper weight: 240 g/m² (depending on material) - Minimum paper weight: 60 g/m² - Speed: Up to 27,000 A4 sheets per hour (depending on material and fold type) - Load capacity: Up to 500 sheets - Electrical requirements: 240V, 50/60 Hz - Dimensions: 1240 mm x 555 mm x 1360 mm - Weight: 118 kg

Bottle Leak Detection System – WILCO Wilcomat R18 SQ/FS High-performance bottle leak detection system designed for quality control in beverage and liquid packaging lines. The WILCO Wilcomat R18 SQ/FS ensures reliable inspection of bottles to detect leaks and maintain product integrity during high-speed production. General Information - Manufacturer: WILCO - Model: Wilcomat R18 SQ/FS - Year of Manufacture: 2006 Technical Specifications - Production Capacity: 35,000 bottles per hour Application - The system is designed for automatic leak detection of bottles in high-speed packaging lines, ensuring that only properly sealed containers continue through the production process. Typical applications include: - Bottled water - Soft drinks - Dairy beverages - Juices and other liquid products Key Advantages - Reliable WILCO leak detection technology - Suitable for hi ...

turning diameter over bed: 360 mm turning diameter over slide rest: 220 mm turning length: 1000 mm turning diameter in the gap: 380 mm turning speeds: 70 - 2000 U/min centre height: 180 mm spindle bore: 50 mm tailstock quill taper MT: 3 MK connected load frequency: 230 oder 400 V total power requirement: 1,8 kW weight of the machine ca.: 0.65 t dimensions of the machine ca.: 2,0 x 0,8 x 1,56 m Professional industrial machine 3-axis digital display 3-jaw chuck 180 mm. 4-jaw chuck 200 mm. Faceplate 280mm Bezel fixed Bezel rotating 4-fold steel holder. Halogen machine light Machine light Foot brake removable chip tray, chip protection wall Hardened and ground bed rails Complete coolant system Feed protection Machine tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

I/01 MODUL CAMBUS RS - 12404580

; Gross weight [kg]: 2600; Inspection Date: 2025-10-22; Amount of previous owners: 1; Maximum lift capacity [kg]: 200

Roller quills 40 mm

plate thickness: 4 mm blade length: 250 mm angle adjustable from - to: fest 90 Grad table surface area: 900 x 800 mm total power requirement: kW weight of the machine ca.: 0,65 t dimensions: 1,2 x 0,9 x 1,1 m Hydraulic notching machine - Footswitch - 2 pcs. sheet metal stop The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 19013 Specifications: - Rated power at 50% ED 16 kVA - Continuous power 13.5 kVA - Max. welding power 63 kVA - Weld values sheet steel 3.0 + 3.0 mm - Projection approx. 100 mm - Arm spacing 130 mm - Electrode force 280 daN - Air consumption at full load of the pliers approx. 6 l/min - Cooling water volume approx. 8 l/min - Connection / connected load 400 V / 63 kVA - Space requirement approx. W 500 x D 1000 x H 500 mm - Weight approx. 50 kg - with: - separate control unit AKZENT T 504-1 - Hanging bracket with gimbal

Key data: 400 mm, 620 mm

Machine Details Stock-No. 1105-04057 Type of machine CNC Lathe - Inclined Bed Type Make DMG MORI Type CLX 450 V4 Year of manufacture 2020 Type of control CNC Storage location FRANCE Country of origin - Delivery time to be agreed Freight basis ex site Technical details turning diameter 680 mm turning length 600 mm control Sinumerik 840 SLIMLINE turning diameter 680 mm Greates Pass Round Over Bed 650 mm Spindle diameter in front bearing 130 mm Spindle Bore 80 mm Spindle Taper 140H5 X-AXIS 220 mm Z-AXIS 810 mm tool taper VDI 40 Tailstock Adjustment 600 mm tension force 4 kN total power requirement 21 kW weight of the machine approx. 5.3 t dimensions of the machine approx. 3.8 x 3.0 x 2.1 m Accessories Documents Chip conveyor Coolant system Turret Additional information CNC Turning and Milling Center DMG MORI -CLX 450 V4 CNC DMG MORI SIEMENS SLIMLINE ...

The machine is visible in our warehouse in Gussago BS. Mimu Machine Tools Gussago BS Italy The machining center is a machine tool equipped with a numerical control capable of performing multiple mechanical operations with a single set-up on multiple surfaces of the same work piece. It is generally equipped with several motion axles and one automatic tool exchange system and sometimes multiple pallets

Key data: 1000 mm, 450 mm, 600 mm

Universal Milling Machine DUFOUR type F250 Travel X: 1000 mm Travel Y: 450 mm Travel Z: 600 mm Spindle SA 40 Table size: Length 1400 mm x Width 400 mm Horizontally + vertically swivel head Spindle speed: from 24 to 1500 RPM Scale 3 axes MITUTOYO Horizontally + Vertically spindle Rapid X - Y - Z Lubricant pump Centralized lubrication pump Voltage: 380 V Width: 2000 mm Depth: 2400 mm Total height: 2200 mm Weight: approx 3,5 T

Dematic conveyor system Roller conveyors 20370-600-540 RA2369 Further information Manufacturer: Dematic Type: Roller conveyor Year of manufacture: 1987 Condition: good (used) Conveyor length (NL):20370 mm, 7 elements between 2620 and 3000 mm, Roller width (RB): 540 mm Nominal/outer width (NB): 600 mm Roller width (RB): 540 mm Frame height: 140 mm Overall height including motor: 240 Roller pitch: 62.5 Drive types: Head Load weight: up to 30 kg recommended Electrical data: 3x 300-500V Gear motor: SEW Conveying speed: 0.7m/s Optionally available Frequency inverter for infinitely variable speed control Supports side guides Price: plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 1987 Electric data: 380-415 condition: gut Conveying length in mm: 20370 Nominal / outside width in mm: 600 Roll width in mm: 540 Roll division in mm: 62,5 Driven:  ...

Dematic conveyor system Roller conveyors 19500-600-540 RA2370 Further information Manufacturer: Dematic Type: Roller conveyor Year of manufacture: 1987 Condition: good (used) Conveyor length (NL): 19500mm, 7 elements between 2620 and 3000 mm, Roller width (RB): 540 mm Nominal/outer width (NB): 600 mm Roller width (RB): 540 mm Frame height: 140 mm Overall height including motor: 240 Roller pitch: 62.5 Drive types: Head Load weight: up to 30 kg recommended Electrical data: 3x 300-500V Gear motor: SEW Conveying speed: 0.7m/s Optionally available Frequency inverter for infinitely variable speed control Supports side guides Price: plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 1987 Electric data: 380-415 condition: gut Conveying length in mm: 19500 Nominal / outside width in mm: 600 Roll width in mm: 540 Roll division in mm: 62,5 Driven:  ...

x-travel: 2.600 mm y-travel: 700 mm z-travel: 700 mm control: iTNC 530 Heidenhain Main spindle:: turning speed range - main spindle: 20 - 18.000 min/-1 power capacity - main spindel: 35 / 25 kW tool taper: SK 40 work table:: table surface area: 2.900 x 700 mm max. table load: 2.150 kg tool magazin:: number of toolpositions: 30 pos. tool taper: SK 40 max. tool diameter: 80 mm max. tool-dia with free toolbox: 130 mm max. tool length: 300 mm max. tool weight: 6,0 kg feeds:: rapid traverse ( X / Y / Z ): 40 m/min feed speeds: max. 40.000 mm/min feed power: max. 8 kN total power requirement: 54 kVA weight of the machine ca.: 14,4 t dimensions of the machine ca.: 8,0 x 5,6 x 2,8 m Chip conveyor: Coolantsystem: high pressure coolant: 40 bar through spindle coolant: Rotary screen: 2x Signal-Light: paper band filter: interface 4. axis: indexing attachment: Hofmann - RWNC-220L tool setti ...

- Manufacturer: Bürkle - Type DAL 1-1300 R - Year of construction approx. 1990 - 1993 - Working width 1300 mm - Machine is overhauled, then very good condition - Working height 870 mm - Part height 3 - 80 mm - Operating side on the right - Paint application roller 50 Shore - Dosing roller hard chrome-plated approx. 174 mm - Rubberized counterpressure cylinder - Belt transport - Length 1050 mm - Feed adjustable via handwheel 6 - 30 m/min - Total connection approx. 2 kW - Weight 3250 kg - With control cabinet - Volts, Hz 400 / 50 - Machine number 4610.17 - Commodity code 8479 8997 - Voltage fluctuations max. +/- 5 % - Images only sample images

Continuous mixer in stainless steel As good as new Motor drive 7.5 KW Capacity up to 15 t/h Fluid addition up to 3%

Diosna dough machine Model: S 20 Stainless steel boiler for max. 20 kg dough Flour dust hood with protective circuit 3 gears with timer Kneading arm newly coated Machine mobile with locking foot DGUV V3 tested E-system NEW Connection 400V, 3 kW, 16A-CEE plug Used machine overhauled 3 months warranty Option: Service Package E-Box Maintenance contract Instruction & Commissioning Many more lifting kneaders in stock!

I am pleased to offer for sale the complete Heat Recovery Steam Boiler with gas burner. Please see below key details about the power plant: Boiler Manufacturer: GEA - DELTAK Capacity: 20 ton / hour at 25 bar Year of Manufacture: 2006

Offer 24177 Specifications: - Tip height 180 mm - Center width 1000 mm - larger circulation – Ø over bed 355 mm - via flat sleds approx. 200 mm - Spindle bore 36 mm - Pick-up cone of the tailstock quill MK 5 - Travel of the tailstock quill 260 mm - Spindle speeds 18 - 1800 rpm -Feeds - Travel of the cross slide approx. 200 mm - Travel of the upper slide approx. 115 mm - Drive 400 V / 5.8 kW - with: - Tailstock, 3-jaw lining, bezel - Steel holder, moving center punch, - Chip tray - Space requirement approx. W 2500 x H 1500 x D 1200 mm - Weight approx. 2100 kg

Unused, complete automatic filling system with heating tank and conveyor belt. manufacture Danish Candle Machinery. Intended for wax-based candle production, but can be used for many other types of filling work. Everything made to order in 2021 in Denmark. Supplied with instructions and EU declaration of conformity. Filling system for filling five units at a time • 1 x 6 kW / 3 x 400 v • Pump, pump bracket, hose • The nozzles are replaceable and come in sizes ø2, ø4 and ø6 mm Heating tank 2000 liters • Heating element: 1 x 9 kW / 3 x 400 v / 30 - 110 ° C • Dimensions: 220 x 120 x 134 cm • Inner and outer tank in stainless steel • Insulation cover in galvanized steel • Lid in aluminum Conveyor • Motor-driven and sensor-controlled • Dimensions: 5 x 0.5 m Find more here - /

1. Process Engineering Equipment - Glycol Tank (B617) Partial system, 1 glycol tank, fully functional, built in 1990 Complete system (control, pumps), cleaned System Installer: DSD Dillinger Stahlbau GmbH Technical Data: Tank – Sheet steel construction, diameter approx. 2m; Length approx. 4m; Weight 4.0 t; Volume 4800 l Find more here - / Contact us at -

Sell some machines from our warehouse

1. Process Engineering Equipment - VA VA-02. Glycol Regeneration System (C 612) 2 double-tank systems, type DPC160-27/5.0/35k/A, built in 1991 Fully functional, cleaned, skid-mounted system - complete unit Manufacturer: Klöpper Therm Dortmund Unterste Wilms Str. 21 44143 Dortmund Tanks: Dillinger Steel Construction Technical Data: Each system consists of 2 tanks – sheet steel construction, diameter approx. 0.88m; length approx. 5.60m; weight per tank approx. 2.80 t; volume per system approx. 4700 l; Motors: SCHORCH KE 9132 M BA014-7; 6.8 kW; 380/660 V; 13.6A; 14400/min; SCHORCH KE3160C-HB012-Z; 5.5/7.5 kW; built in 1991; 380 V; 13.4/14.4 A; 720/14400/min; Find more here - / Contact us at -

System Installer: DSD Dillinger Stahlbau GmbH Technical Data: - F612 - 2 units each, diameter approx. 0.54m; length approx. 1.5m; volume 155l, built in 1990 - W613 - 1 unit each, diameter approx. 0.46m; length approx. 2.30m; volume approx. 280l, built in 1990 - B613 - 1 unit each, diameter approx. 2.30m; length approx. 2.62m; volume approx. 120l, built in 1990 - 612.3 and 4 - 2 glycol filters each, diameter approx. 0.4m; length approx. 1.6m; weight 0.3t; volume 100l Find more here - / Contact us at -

VA-04. Gas Drying – Absorber Systems (T610 Partial system, 2 absorber tanks, functional, Built: 1990 Complete system (control, etc.), cleaned System Manufacturer: DSD Dillinger Stahlbau GmbH Technical Data: Tank – Steel sheet construction, Diameter approx. 1.6m; Length approx. 6.9m; Mass 19.0 t; Volume 9000 l Find more here - / Contact us at -

Pharma mixer for mixing, granulating, and chopping powders and liquid mixtures, for batch sizes in wet granulation up to max. 100 kg, with a total volume of 250L. The mixer was completely overhauled in 2012.

VA-07. Residual Gas Compression/Process Water (B660) 1 process water tank type BALRG 998 Partial system, 1 process water tank type BALRG 998, Built: 1991 System incl. pipeline system, functional, cleaned Manufacturer: DEHOUST GmbH Technical Data: Tank – Steel sheet construction, Diameter approx. 2.0m; Length 8.0m; Mass 5.0t; Volume 24,000 l; Test pressure 2 bar Find more here - / Contact us at -

Key data: 1020 mm, 510 mm, 510 mm

Machine Details Stock number 1105-04058 Machine Type Machining Center - Vertical Make DOOSAN DAEWOO Type MYNX 540 Year of construction 2002 Condition Control type: CNC Storage location HAGUENAU FRANCE Country of origin KORREA Delivery time IMMEDIATELY Ex-works freight base Technical details longitudinal 1020 mm landscape 510 mm vertical 625 mm Tool Changer 30 Pos. max. tool length 250 mm max. tool diameter 80 mm max. tool diameter. with a free neighboring box. 130 mm Rapid traverse 30 m/min Machine weight approx. 7 t Drive power 100% ED 15 kW Drive power 40 % ED 13 kW Speed range 8000 1/min Tool holder SK 40 Table surface 1200 x 500 mm Permissible load (centre of the table) 800 kg Information FANUC 21 M B El. Handwheel Conveyor 8000 RPM 30 SPEED ATC BT 40

VA-06. Gas HD – Separator Systems (F 603) Partial system, 4 HD separators, functional, Built: 1990 Complete system (control, etc.), cleaned System Manufacturer: DSD Dillinger Stahlbau GmbH Technical Data: Tank – Steel sheet construction, Diameter approx. 0.8m; Length approx. 3.4m; Mass per unit 2.5 t; Total volume 1128 l Find more here - / Contact us at -

For sale: Powerful Doosan vertical machining center type Mynx 7500/40, equipped with the well-known control system of the Fanuc i-series including Fanuc Manual Guide i dialog area. This model, with a net weight of 13,500 kilograms, has an X, Y and Z axis displacement of 1,525 x 762 x 625 mm each. The table size is 1,600 x 750 mm. The machine is fully equipped with block guides. The pivot shot is an ISO 40 shot. The machine has a so-called arm changer with 32 positions and is also equipped with cooling through the spindle. As an extra, the machine is equipped with an integrated fourth Nikken axle with counter center. The machine also has a right-hand discharge chip conveyor. On request, you can purchase additional tool holders for the machine. The machine is in excellent condition and for more information please send an email to chrismachinematch.nl

Key data: 200 KW, 225 kVA, 400 V

1 emergency generator with Deutz diesel engine and Siemens generator, Power 225 kVA = 200 kW, 400V/3PH/50Hz, Start with 20 bar compressed air, complete with 2 pressure vessels and matching compressor, approx. 1,000 operating hours, still completely operational

TO WHOM IT MAY CONCERN; WE VE 2 PCS USED REPORTED EXHAUST GAS TURBOCHARGERS ABB TPS 57 - D01 AT STOCK PLS FIND DETAILS ON BELOW TYPE TPL 57-D01 HT 466584 & 466585 N MAX 718 TMAX 650 nMAX 682 620 PLS FIND SERVICE REPORT ON FILES SECTIONS IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US With Kind Regards ; Aliaga Marine Services E-mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 85 Mobile: +905556084850 abc.aliagamarine.com TURKEY

ID3502 OMAG Plant for large-diameter pipes  / Großrohranlage OMAG large pipe system (all hydraulic) including molds, bases, support rings, various accessories and forklift with turning tongs OMAG large-diameter pipe system (all hydraulic) including moulds, lower sleeves, support rings, various accessories and forklift with turning pliers

x-travel: 730 mm y-travel: 730 mm z-travel: 880 mm total power requirement: 46 kW weight of the machine ca.: 15 t required space: 5.5x3.0x2.8 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Inv. Num. : 8243 Type: DMU 60 P Producer: DMG Generated: Parameters: Work table length: 1000 mm Work table width: 600 mm Number of axles: 5 pieces X-axis travel: 600 mm Y-axis travel: 525 mm Travel Z axis: 500 mm Speed: 12000 1/min Machine weight: 4000 kg

Key data: 500 mm, 600 mm

Machine Details Stock-No. 1105-04060 Type of machine CNC Lathe Make MONFORTS Type DNC 5 Year of manufacture 1995 Type of control CNC Storage location HAGUENAU Country of origin Germany Delivery time immediately Freight basis ex works Price Technical details turning diameter 520 mm turning length 600 mm control Siemens type 840 C Spindle Passage 85 mm Spindle diameter 130 mm swing diameter 560 mm Tool changer 12 Tool changer 12 turning speeds 32-4000 rpm weight of the machine approx. 13 t dimensions of the machine approx. 4.5x5.5x2.1 m Additional information Machine is equipped with a counter spindle. lots of accessories CNC SIEMENS 840 C

Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. You have a first idea or even a concrete plan? It does not matter how far your project is, we support you in every phase! Or do you want to sell or market your machine? We also buy machines or provide you with a marketing concept. Ask for your individual offer or visit us in Knetzgau. Concerning bigger projects we can of course also visit you in your company to do an on-site survey. Our DRINK technicians are working worldwide for our customers! We are looking forward to hearing from you. All information is supplied without guarantee.

Diosna HK224 Lifting tipper for Diosna SP240AD / SPV240AD boiler - Manufacturer: Diosna - Type: HK224 - for Diosna SP240AD and SPV240AD boiler - Load capacity 600Kg - Year of construction 2009 - With boiler scraper - with boiler drive - 400V / 50Hz - 1.7 kW Metrics: Height approx. 405cm Dumping height approx.: 220cm

Manufacturer: DMG GILDEMEISTER Model: CTX 310 ECOline Year of Manufacture: 2009 Control System - Siemens Sinumerik 810 D Application - Precision machining of workpieces with a maximum diameter of 200 mm. Features - 12-station turret - Integrated chip conveyor - Workplace lighting - Foot switch - Documentation: DTR Technical Data:  Max. turning diameter: 200 mm Max. pass-through diameter: 330 mm Max. pass-through diameter over cross slide: 260 mm Feed rate in X/Z axis: 160/450 mm Speed in X and Z: 24 mm/min Max. spindle speed: 5000 rpm Spindle bore: 51 mm Spindle drive power (40%/100% DC): 16.5/11 kW Max. spindle torque (40%/100% DC): 166.5/112 Nm Tailstock stroke: 400 mm Tailstock force: 400 daN Operating hours (as of 06.03.2025, still in operation): 48,066 h Installed power: 21 kVA Power supply: 400 V; 50/60 Hz Dimensions (L x W x H): approx. 4150 x 1700 x  ...

Tool diameter: mm sanding disc diameter: mm Motor output: 3 kW total power requirement: 3 kw Weight: 1.400 kg Overall size: mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 25079 Specifications: - max. working width 3100 mm - max. cutting capacity - at 400 N/m² strength 13 mm - at 700 N/m² strength 10 mm - Cutting angle 1°30' - Cutting gap adjustment via hand lever - Number of hydraulic hold-downs 14 pcs - Engine backgauge - E. footswitch - Front angle stop - Stroke rate 15 rpm - Drive 380 V / 22 kW - Table height 800 mm - Space required including back gauge, without front support arms -ca. W 3400 x H 2250 x D 2150 mm - Weight approx. 12000 kg

Veneer press Brand: ORMA Type: NPC/DIGIT 6/90 New machine Technical datas: Press area: 2500x1300 mm Amount cylinder: 6 Lift & max. press opening: 400 mm Total pressure: 90t Electro-heater 18 kW for thermo-oil (up to 120°C) Optional: - Aluminium coating - 650 mm stroke - Parallelism control by sensor - Extra charge for down stroke design - Extra charge for temperature up to 150°C - Extra charge for temperature up to 200°C - Mylar protection foil 350,00 ? per panel - Pressure plate covered with glass fiber fabric Teflon - Hardware for Industry 4.0

Edge magazine IMA - 6x - 24x fold magazine - 550 or 800 mm coil diameter Several versions available from stock. Price on request.

Hot press Make: ORMA Type: NPC/DIGIT 6/95 New machine Technical datas: Press area: 3000x1300 mm Amount cylinder: 6 Lift & max. press opening: 400 mm Total pressure: 90t Electro-heater 18 kW for thermo-oil (120°C) Optional: - Aluminium coating for panels - 650 mm stroke - Parallelism control by sensor - Extra charge for down stroke design - 4 side loading - Max. temperature up to 150°C - Max. temperature up to 200°C - Mylar protection foil - Pressure plate covered with glass fier fabric Teflon - Hardware for Industry 4.0

various pressure zones IMA - from stock - price on request

Single sided postforming edge processing machine Brand: WEHRMANN   Type: Combima DPF New with 12 months warranty Example with typical equipment; almost each equipment is possible.  Please discuss your requirements with us  Technical data: Machine control: BECKHOFF route control with 15? Touch-Screen for pre-selection of units and for saving programs.  The workpiece transport via precision roller chain R75 with height adjustable top pressure.  Feed speed: max. V=6-30 m/min.  frequency controlled drive,  Top pressure: Motorical height adjustment via axis adjustment in program Right hand site equipped with 1 unit, width adjustment via NC axis: 1 Pre-milling unit With 1 motor with vertical shaft,  400 V, 12,5 KW, 100 Hz, 6000 rpm. Motor shaft Hydro D40 Swivable 90 - 180 degrees, move in/out for use Left hand site Seite: 1 Infeed fence  Infee ...

Unit for grooving / precision cutting Make: IMA

electric motor, three-phase motor -Power: 0.55 kW -Speed: 1410 rpm -Shaft: Ø 19 x 40 mm -Design: B3, explosion-proof -Protection class: IP 55 -Quantity: 1 available -Dimensions: 320/163/H255 mm -Weight: 24.1 kg

Reference ID: PP-58435 Category: Folder Gluer Manufacturer: Bobst Model: DOMINO 145 MATIC A4 Year Built: 1993 Impression: - Working Hours: - Condition: Good Location: Europe Availability: Immediately Machine Description: Machine Options: • Straight-line gluing • Straight-line upper gluing • Straight-line gluing + EUR lock • Crash lock / crash lock with partition • Special – conical construction Workable Materials: • Solid board • Flute N • Flute F • Flute E • Flute B Machine Equipment: • HHS Xtend2 gluing system • LNT 300 gluing check, 1x under wheel • PL500 gluing nozzles, 4 pieces • Prefolding tool for gluing flap • Under gluing wheels width: 5 mm and 10 mm