perske d used for sale

1999 WEBER LC 2000 DDP-600 Working width max. 600 mm Workpiece thickness max. 150 mm automatic measurement of the workpiece thickness Feed continuously adjustable 2 - 12 m/min. Aggregate equipment: 1) Contact roller unit with smooth steel roller Drive motor 15 KW, pole-changing for 2 grinding speeds 2) Rubber contact roller assembly with corrugated rubber roller Hardness 60 Shore drive motor 15 KW, pole-changing, this one The motor also drives the subsequent sanding shoe unit 3) Sanding shoe unit pneumatically controlled Machine complete with small parts return, designed as a transport curve, as a plate conveyor transport Machine weight approx. 1,800 kg Connection values: 400 V, 50 Hz, 3 Ph. Find more here - / Contact us at -

2022 Diebels RMH Con Sort III Wet cutting table Technical data: Drive power [kW]: 2.6/32 CEE plug Separating area LxW [mm]: 1270 x 710 Lightweight discharge area [mm]: 1270 x 710 Number of water pipes [pcs]: 5 Number of water nozzles [pcs.]: 18 Water tank volume [litres]: 400 Electrical connection [V/A]: 400 / 32 CEE plug Weight [kg]: 750 Dimensions (without tank) LxWxH [mm]: 2500x1010x1120 Speed control in 3 stages via potentiometer on the control cabinet VA water tank with waste water pump Automatic water level control via Quick stop Operational hours: 100 hours. The separate water tank with filter was adapted by us to this system and would also be included in the sale if desired. This also applies to the table frame. Find more here - / Contact us at -

DOOSAN LYNX2100LMB (installed new in 2021). Model: LYNX 2100LMB Power Connection: AC 380V, 3-phase, PE, 50/60 Hz Rated Power: 27.07 kVA Interruption Capacity: 5 kA Full Load Current: 41.14 A Short-Circuit Capacity: 10 kA Control System Output: L22SYH404A05 Weight: 3000 kg Manufacturing Date: November 2020 (2020.11) Machine has the following list of toolholders ; A. Turning Holder - OD Tool Holder (Right & Left) - Quantity: 2 pieces - Face Tool Holder (Right & Left) - Quantity: 1 piece - Double OD Tool Holder (Right) - SUB- Quantity: 1 piece - Cut-off Tool Holder (Right Hand) - Quantity: 1 piece B. Boring Holder - ID Tool Holder - Quantity: 2 pieces - Triple ID Tool Holder - Quantity: 1 piece - U-Drill Cap - Quantity: 1 each C. Milling Tool Unit - Straight (Short) - Quantity: 2 pieces - Angular - Quantity: 2 pieces D. Tool Sleeves - Boring Sleeves (Main) - Quantity: 1 ki ...

DOOSAN LYNX2100LSYA (installed new in 2021) Model: LYNX 2100LSYA Power Connection: AC 380V, 3-phase, PE, 50/60 Hz Rated Power: 37.43 kVA Interruption Capacity: 5 kA Full Load Current: 56.87 A Short-Circuit Capacity: 10 kA Control System Output: L220SYH840A05 Weight: 4150 kg Manufacturing Date: November 2020 (2020.11) Machine has the following list toolholders ; Turret Type (Mechanism/Station): Servo/24ST Holder Mounting Type Tool Size (Turning/Boring): BMT-45P 20/32 mm Tooling Parts Detail A. Turret Head/Tool Table - - Quantity: 1 ea B. Turning Holder - OD Tool Holder (Right & Left) _MAIN - Quantity: 1st - Face Tool Holder (Right & Left) _MAIN - Quantity: 1st - Double OD Tool Holder (Right & Left) _MAIN/SUB - Quantity: 1st - Double OD Tool Holder (Right & Left) _MAIN - Quantity: 1st - Double OD Tool Holder (Right & Left) _MAIN - Quantity: 1st - Double OD Tool H ...

DMG MORI Machining Center Type: M1 Year of Manufacture: 2020 Maximum Spindle Speed: 12,000 revolutions per minute (rpm) Maximum Table Load: 5800 kg Power Supply Requirements: - Power Consumption: 20 kVA - Maximum Current: 35 A - Voltage: 400 V (±10%), 50 Hz - Maximum Short-Circuit Current: 0.40 kA Other Electrical Specifications: - AC Voltage: 400 V - DC Voltage: 230 V / 24 V CE Marked Find more here - / Contact us at -

CNC lathe Type: Lynx 300 Manufacturer: Doosan Year: 2011 Control: Fanuc i Series Toolholders Machine in good condition, under power Find more here - / Contact us at -

Technical Data - Year of Manufacture: 08/2019 - Dimensions (LxWxH): 35x4x5 m - Total Weight: Drying approx. 7 tons, Washing approx. 9 tons - Throughput: approx. 700 kg/h aluminum shavings, approx. 1400 kg/h alloy shavings - Energy Source (Drying): Gas - Energy Source (Washing): Gas - Gas Consumption: approx. 44 m³/h - Electricity Consumption: approx. 37 kWh/h - Dimensions (LxWxH): 35x4x5 m - Electrical Data: - Nominal Voltage: 400 V - Network Frequency: 50 Hz - Control Voltage: 24 V Find more here - / Contact us at -

1. CNC Lathe - DMG MORI SPRINT 20/5 (Swiss Type): - Model: SPRINT 20/5 - Year of Manufacture: 2016 - Max Spindle Speed: 10,000 RPM - Max Bar Diameter: 25 mm - Max Torque: 100 Nm - Weight: 2,150 kg - Manufacturer: DMG MORI - Condition: Excellent, well-maintained machine. 2. Barfeeder - IEMCA SMART 320: - Model: SMART - Type: 32 LL - Year of Manufacture: 2016 - Max Pressure: 6 bar - Weight: 440 kg - Voltage: 200 V, 3-phase - Current: 5 A - Frequency: 50 Hz - Manufacturer: IEMCA - Condition: Fully operational and in excellent working condition. Find more here - / Contact us at -

3-axis CNC lathe Type: Puma GT 2600 LM Manufacturer: Doosan Year: 2022 Control: Fanuc i-Series Hours: 270 Turning diameter over bed: 630 mm Turning diameter over support:460 mm Max turning length: 1030 mm Spindle bore: 81 mm Max work weight without/with tailstock: 260/520 kg Spindle speed: 3500 rpm Automatic turret: 12 positions Driven tools speed: 5000 rpm X: 265 mm Z: 1100 mm C: +-360• Chip conveyor Tool probe Machine weight: 4950 kg Machine in very good condition, under power. Find more here - / Contact us at -

- Manufacturer: DMG MORI - Model: CLX 450 - Type of machine: Horizontal Turning Machine - Year: 2020 - Max Spindle Speed: 4000 RPM - Weight: 6400 kg - Power Requirements: - Power: 39 kVA - Max Current: 56 A - Max Voltage: 440 V ±10% - Frequency: 50/60 Hz - AC Voltage: 400 V - DC Voltage: 24 V Including the following equipment: - 13 rotary tool holders (coolant through, 5 radial and 8 face) by ALGRA/MT Marchetti - more than 20 steady tool holders for turning and boring tools by ALGRA - 4 bolted tool holders by SAUTER/ALGRA - a mechanically operated bar puller toolholder by KINTEK - a live center - balanced pressure clamping (able to grip thin walled parts) - sets plastic drawtubes for bar working in different diametrers - more than 50 sets of soft machined jaws - 5 sets of hard jaws for different range of diameters and inside/outside clamping by SMW - SMW special ring for soft jaw turn ...

Model: DOTR 63000/123 Rated Power: 50 / 63 MVA High Voltage (HV): 115 kV High Voltage Tapping Range: +9 / -9 x 1.778% (adjustable under load) Insulation Level HV: 123/550/230 kV Low Voltage (LV): 31.5 kV Insulation Level LV: 36/170/70 kV Tertiary Voltage: 6 kV Insulation Level TW: 12/75/28 kV Frequency: 50 Hz Vector Group: Yynyn0(d) Cooling Method: ONAN / ONAF Maximum Oil Temperature Rise: 60 K Maximum Winding Temperature Rise: 65 K Ambient Temperature Range: -25°C to 40°C Impedance: - At 50 MVA: 15.8% (± IEC-Tolerance) - At 63 MVA: 21% (±7.5%) No-Load Losses: 12.5 kW (+IEC-Tolerance) Load Losses at 50 MVA: 154 kW (+IEC-Tolerance) Noise Power Level at ONAF (No Load): 80 dB(A) Weight Details: - Shipping Weight: Approx. 87,500 kg - Weight of Oil: Approx. 15,300 kg - Active Part: Approx. 58,500 kg - Total Weight: Approx. 89,800 kg Dimensions: - Shipping Dimensions ...

Dematic conveyor system roller conveyors 16000-600-540 RA2340 The roller conveyor shown does not correspond exactly to the illustration in the advertisement, but is the same model and is in the same condition. Only the dimensions differ. Further information Manufacturer: Dematic Type: Accumulating roller conveyor Year of manufacture: unknown Available conveyor lengths (FL): 16000 mm Stowage space size: 750 mm Nominal/outer width (NB): 600 mm Condition: good (used) Roller width (RB): 540 mm Roller pitch: 125 mm variable Drive types: SEW geared motor Weight of conveyed goods: up to 30 kg Stowage mechanism: Light barriers with pneumatic valve and cylinder The following accessories are optionally available e.g: additional elements to expandable frequency converter supports lateral guides Price: plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Electric  ...

Dematic conveyor system Accumulating roller conveyors Roller conveyor 3000-600-540, 750 RA2290 Manufacturer: Dematic Type: Drive unit accumulating roller conveyor Year of construction: 2012 Condition: good (used) Roller width (RB): 540 mm Element length: 3000 mm, optionally shortenable Stowage space size: 750 mm Roller pitch: 62.5-125 mm variable Drive types: Head and center drive Weight of conveyed goods: up to 30 kg Technical data: SEW geared motor 380V RA2290.1 Manufacturer: Dematic Type: Accumulation roller conveyor extension module Year of manufacture: 2012 Condition: good (used) Roller width (RB): 540 mm Element length: 3000 mm, optionally shortenable Stowage space size: 750 mm Roller pitch: 62.5-125 mm variable Drive types: Overdrive from RA2290 (necessary) Weight of conveyed goods: up to 30 kg Optionally available e.g: SEW Eurodrive / Movimot frequency inverter Supports Sid ...

Lid FP2A from vocational training center freshly serviced in top condition x-travel 300 mm y-travel 300 mm z-travel 400 mm Spindle holder ISO 40 Spindle speeds 40 - 3150 rpm Table size 620 x 390 mm Feeds infinitely variable 4 - 4000 mm/min CNC control Dialog4 (software update) Table load 0.45 t Total power requirement kW Machine weight approx. 1.6 t Operating voltage 380 V Footprint 1.9 x 2.0 mm Control cabinet 1.90 x 0.75 x 1.05 m Dimensions approx. 2.9 x 2.7 x 2.0 m

Cover FP42NC 2387 X-Axis Ball Screw with Nut new! Number according to spare parts plan: 2388-002435 Shipping by arrangement

Handwheel Dialog 4/11 - Contour3 Two available, one in very good condition, the second is new NOS!

Deckel FP NC Measuring Microscope Hensold Wetzlar MZM30 with SK40 DIN Cone with Gripper Groove

Technical data of the pallet rack crossbar: Shelving system: Dexion Type: P 90 The scope of delivery includes: 01x Pallet rack crossbar, used Material colour: sendzimir galvanised Box profile: 100 x 50 mm Truss Type: BX100|50|13 Agraffe: 5 HK Clear width: 2,700 mm Max. load per pair of trusses 2,400 kg, with the same weight. Distributed load 02x Locking pin, used Design: sendzimir galvanized For securing the longitudinal members Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. Any additional transport or shipment of this item is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery.

PRECISION SCALE M. No.: WD080052457 Equipment / Additional information: Max: 36 kg / d=10g

Description HERSTEL Vertical Lathe VDM 120 Details Year of construction 1998 Control Siemens Sinumerik 840C Flexos Max. turning diameter 1,300 mm max. circulating diameter 1,400 mm (option 1,500 mm) Axis stroke Z/X axis 1,000/1,000 mm (option 1,000/1,500 mm) Dimensions to top edge of spindle 940 mm Main Spindle Bearing Circulation Lubrication 2-speed manual transmission autom. Range switching Main spindle motor 76/115 kW Clamping device diameter 1,600 mm Chuck pick-up centering diameter 790 mm Max. feed force Z-/X-axis 25,000 N Axis speed Z-/X-axis 0.01 - 14,000 mm/min. Disc turret with B-axis Tool holder modular system UTS 50 Main dimensions approx. 6,250 x 3,300 x 4,500 mm incl. documentation

Full creel Wurster Dietz gdzge71 with width understanding passage 710mm stroke 600 engine 90kw fully hydraulic span wagon auxiliary car spalkeil kapsaegge

:::TECHNICAL SPECIFICATIONS::: CNC model: Heidenhain - CNC version: iTNC 430 - Tool holder: HSK 63 - Spindle power: 15Kw Number of spindle speeds: 18000 - Number of tools: 32+32 - X-axis travel: 2050mm - Y-axis travel: 520mm - Z-axis travel: 520mm Table dimensions: 1000 x 600mm Guides: roller Partition for pallet change: yes Swivel rotary table: yes Swivel rotary table type: continuous Swivel rotary table degrees: 0° - 180° Table size: 700 x 500mm High refrigerant pressure: yes Pressure value: 70bar External tank system with filter: yes Chip conveyor: belt Presetting: yes Machine equipment: Ethernet card Heidenhain TT 120 touch probe

Column swaying crane, Demag / J.D. Neuhaus, 125kg with pneumatic chain hoist – used - : Price from location: 1.500.-€ (net)! Manufacturer: Demag Manufacturer chain hoist: J.D. Neuhaus Type: unknown or will be submitted later Year of manufacture: unknown or will be submitted later Payload: 125kg Height of the column and length of the boom must be submitted later Condition: good Available: from approx. Mid-January to mid-February 2ß25 Location: Munich. Later Frankenberg camp

Specifications: Maximum cutting width: 3100 mm Maximum cutting capacity steel St40: 10.0 mm Cutting gap adjustment adjustable rip fence Motor power: 15 kW Dimensions (length x width x height): approx. 3900 x 1950 x 2150 mm Weight: approx. 9,5 tons

Dematic conveyor system Accumulating roller 22000-500-440 RA2342 The roller conveyor shown does not correspond exactly to the illustration in the advertisement, but is the same model and is in the same condition. Only the dimensions differ. Further information Manufacturer: Dematic Type: Accumulating roller conveyor Year of construction: unknown Conveyor length (FL): 22000 mm Condition: good (used) Roller width (RB): 440 mm Nominal/outer width (NB): 500 mm Accumulation slot size: 700 mm Storage slot control: Plug and Play, electro-pneumatic Roller pitch: 125 mm Drive types: SEW Eurodrive head drive Conveying speed: approx. 0.5 m/s Optionally available e.g: Frequency inverter for stepless speed control Supports Side guides Price: net plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: condition: good (used) scope of delivery: without supports and side guid ...

Specifications: Maximum cutting width: 3050 mm Maximum cutting capacity steel: 10.0 mm Cutting gap adjustment Cutting angle adjustment adjustable rip fence Dimensions (length x width x height): approx. 3500 x 2500 x 2050 mm Weight: approx. 9,5 tons

Dematic conveyor system Accumulating roller 18000-500-440 RA2343 The roller conveyor shown does not correspond exactly to the illustration in the advertisement, but is the same model and is in the same condition. Only the dimensions differ. Further information Manufacturer: Dematic Type: Accumulating roller conveyor Year of construction: unknown Conveyor length (FL): 18000 mm Condition: good (used) Roller width (RB): 440 mm Nominal/outer width (NB): 500 mm Accumulation slot size: 700 mm Storage slot control: Plug and Play, electro-pneumatic Roller pitch: 125 mm Drive types: SEW Eurodrive head drive Conveying speed: approx. 0.5 m/s Optionally available e.g: Frequency inverter for stepless speed control Supports Side guides Price: net plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: condition: good (used) scope of delivery: without supports and side guid ...

Specifications: Maximum cutting width: 4050 mm Maximum cutting capacity steel St40: 13 mm Maximum cutting capacity stainless steel: 8 mm Cutting gap adjustment Cutting angle adjustment adjustable rip fence Dimensions (length x width x height): approx. 4600 x 2400 x 2450 mm Weight: approx. 20 tons

Control: SIEMENS - 840 D - - -: - - - - - - - - -: - - - - - - Milling Machine - Horizontal | DMG - DMC 60H linear The machine is in a well-maintained condition. The machine video from the production plant will be shared on request. Technical data of the machine will follow soon. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: DMC60Hlinear | DMC 60-H | DMG - DMC 60 H The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dematic incline belt conveyor 10300-500-400 RA2347 Conveyor length (FL): 10300 mm (800 mm forward run, 8400 incline segment and 1100 mm arch) Outer width/nominal width (NB): 500 mm Outer width/nominal width with motor: 750 mm Belt width (GB): 400 mm Profile height: 135 mm Climbing belt with curved section Infeed conveyor with overdrive Arched section with 2 adjustable bends Rubberized drive drum Drive: SEW 400 V 0.55 kW Optionally available supports side guides Frequency converter for infinitely variable speed control Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: condition: very good (used) Conveying length in mm: 10300 (800 + 8400 + 1100) Nominal / outside width in mm: 500 Belt width in mm: 400 Driven: YES Engine type: SEW Eurodrive KW: 0,55/S1 scope of delivery: without supports and side guides Für eine individuelle, fachmännische Beratung  ...

Dematic conveyor system Accumulating roller 40000-500-440 RA2344 The roller conveyor shown does not correspond exactly to the illustration in the advertisement, but is the same model and is in the same condition. Only the dimensions differ. Further information Manufacturer: Dematic Type: Accumulating roller conveyor Year of construction: unknown Conveyor length (FL): 40000 mm Condition: good (used) Roller width (RB): 440 mm Nominal/outer width (NB): 500 mm Accumulation slot size: 700 mm Storage slot control: Plug and Play, electro-pneumatic Roller pitch: 125 mm Drive types: SEW Eurodrive head drive Conveying speed: approx. 0.3 m/s Optionally available e.g: Frequency inverter for stepless speed control Supports Side guides Price: net plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: condition: good (used) scope of delivery: without supports and side guid ...

Dematic conveyor system Accumulating roller 12000-500-440 RA2345 The roller conveyor shown does not correspond exactly to the illustration in the advertisement, but is the same model and is in the same condition. Only the dimensions differ. Further information Manufacturer: Dematic Type: Accumulating roller conveyor Year of construction: unknown Conveyor length (FL): 12000 mm Condition: good (used) Roller width (RB): 440 mm Nominal/outer width (NB): 500 mm Accumulation slot size: 700 mm Stowage slot control: Plug and Play, electro-pneumatic Roller pitch: 125 mm Drive types: SEW Eurodrive head drive Conveying speed: approx. 0.5 m/s Optionally available e.g: Frequency inverter for stepless speed control Supports Side guides Price: net plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: condition: good (used) scope of delivery: without supports and side guid ...

COMMERCIAL OFFER 22.7 MW HFO / DIESEL POWER PLANT NEVER USED – NEVER INSTALLED – SURPLUS EQUIPMENT Plant Description We are pleased to offer for immediate sale one (1) complete 22.7 MW Heavy Fuel Oil (HFO) / Diesel Power Plant, configured for 13,800 Volts and 60 Hz operation. The equipment is in surplus condition, has been never used, never installed, and remains available with associated auxiliaries and Balance of Plant systems. The generating units are capable of operating on: Heavy Fuel Oil (HFO) Diesel Oil Gas Oil Marine Gas Oil (MGO) Marine Diesel Oil (MDO) Year of manufacture of the equipment ranges from 2008 to 2012. Scope of Supply Generating Sets Included MAN–Doosan Generator Sets Quantity: Four (4) Model: MAN-Doosan 6L27/38 Output: 1,980 kW each Total Capacity: 7.92 MW Wärtsilä 9L20 Generator Sets Quantity: Six (6) Model: Wärtsilä ...

Bar Tensioning System - Post-Tensioning System DYWIDAG 4 pieces of post-tensioning systems for reinforcing steel Pressing force 60 tons for rod types up to WR 32 Piston stroke 50 mm Piston area 132.54 cm² Operating pressure max. 500 bar Length of the jack 401 mm Total weight of the 4 presses 160 kg

Crimping Tool DMC Crimping tool for turned contacts MS 3198 - 1

Crimping Tool DMC Crimping tool for turned contacts Insert M 22520 / 1 - 01 only 1169 - 2 left

ID3448 Demag 3160 – Challanger year/Baujahr 2012 6900 hours/hours, 118.000 km 50 m mast, crane completely overhauled 50 m mast, crane completely overhauled

- Cylinder head for Deutz 440 - K - New and original packaging - stored in a dry place - Manufacturer quality

Dematic conveyor system Accumulating roller 24000-500-440 RA2346 The roller conveyor shown does not correspond exactly to the illustration in the advertisement, but is the same model and is in the same condition. Only the dimensions differ. Further information Manufacturer: Dematic Type: Accumulating roller conveyor Year of construction: unknown Conveyor length (FL): 24000 mm Condition: good (used) Roller width (RB): 440 mm Nominal/outer width (NB): 500 mm Accumulation slot size: 700 mm Stowage slot control: Plug and Play, electro-pneumatic Roller pitch: 125 mm Drive types: SEW Eurodrive head drive Conveying speed: approx. 0.5 m/s Optionally available e.g: Frequency inverter for stepless speed control Supports Side guides Price: net plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: condition: good (used) scope of delivery: without supports and side guid ...

Key data: 1250 mm, 13 mm

1250 x 13mm Hydraulic shear

Intake pipe: 180 mm Voltage: 230 V, 50 Hz Filter area: 6.0 m² Flow rate: 1000 m³/h Total power requirement: 0.3 kw Machine weight approx.:78 kg Dimensions L-W-H: 400x600x700 mm Electrostatic separator: Filter chamber L: 360 x W: 510 x H: 500mm 3 trays with: - Pre-filter (knitted stainless steel) 500x370x20mm -Ionizer/Collector Cell 500x370x210mm -Post-filter (knitted stainless steel) 500x370x20mm

Key data: 11 , 1 , 250

Claw compressor Gardner Denver ( Elmo Rietschle ) C-DLR-250, UNUSED. Capacity 250 m3 / hour; 11 kW; EX motor; maximum pressure 1,8 bar; 2950 round per minute; Dimensions L 1450mm, H 1100mm, W 950mm Electric connection 400 V

x-travel: 400 - 800 mm y-travel: 200 - 400 mm z-travel: 200 - 400 mm total power requirement: 3 kW weight of the machine ca.: ? t dimensions of the machine ca.: ? m Short-term free from current operational resolution Untested, wear and tear due to age and use Price EXW / ex foundation Machine package 3 x Bridgeport 1 x Bridgeport design 1 x Kunzmann 2 x Fritz Werner 1 x DETOMBAY 2 x Reckermann The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Lips LMP Extention Printcard 1185082-6111610321 WÄrtsila Art.No:E000004111

Compressor Becker T 4.25 DSK; 50/60 HZ; 1420/1700 umin.; 1.10/1.30 KW power; Air flow rate 25/30 m3/h; Pressure 600/600 mbar; new slats; installed in Foliant Taurus 530. Compressor Becker T 4.25 DSK; 50/60 HZ; 1420/1700 umin.; 1.10/1.30 KW power; air 25/30 m3/h; pressure 600/6000 mbar; with new blades; used for Foliant Taurus 530.

Wärtsila Lips Drunen LMP REV 1 LMP REV 1 23456789 4306590023 Wärtsila Art No.: W006927795

power capacity: kW volt: V ampere: A total power requirement: kW weight of the machine ca.: 84 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: IVM Model: DTPlus-600-2-XL (2 x Epson i3200 Print Heads) Year of Manufacture: 2023 Type of Machine : Digital Transfer Printing Line - Printing Speed: - 4-PASS: 12 m²/hour - 6-PASS: 8 m²/hour - 12-PASS: 4 m²/hour - Maximum Print Width: 600 mm - Maximum Print Resolution: 1800 dpi - Print Thickness: Adjustable from 1.5 mm to 6 mm Technology and Features: - Printhead Technology: Epson i3200 - Number of Printheads: 2 - Printhead Spacing: 10 mm - Ink Colors: CMYK + White - White Ink Circulation: Automatic - Color Management System: Standard - Ink Type: Water-soluble pigment ink - Ink Supply System: CISS (Continuous Ink Supply System) - Printing Costs: 1 L white ink = 40 m Drying and Software: - Drying Method: Air Drying System - RIP Software: MainTop Power and System Requirements: - Power Supply: 220 V - Power Consumption: 1200 W - System Requirements: Windows 7 or W ...