perske d used for sale

Safety light curtains Leuze various models on request

Brand Daewoo Model: DDAE10500DSE-3G Year of construction: 2022, New Capacitance (KvA) 8.1 kVa (230v) / 7.5 kVa (400v) Engine brand Daewoo Engine model 500 Motor capacity (Kw) 15 Hp Fuel Diesel Voltage 230-400 Frequency (Hz) 50 Dimensions LxWxH (mm) 880 x 560 x 720 Weight (Kg) ca 165 Number of stucco in stock 100+ Comments Max power: 8.1 kVA (400 V) 7.3 kVA (230 V) Rated power: 7.5 kVA (400 V) 6.7 kVA (230 V) Engine Power: 15hp Displacement: 498 cc Fuel tank capacity: 15 L Oil tank capacity: 1.65 L Run time 50% load: 12 hrs Power factor: 1.25 Socket: 1 x 16 A - 1 x 32 A Output 12V: ✓ Battery: 36 AH Noise level at 7M: 72 - 74 dBA Net weight: 165 kg Dimensions: 880 x 560 x 720

(slitter / cutter / creaser) M. No.: 081058130 Power: A4 brochures (cut on 4 sides, creasing centrally) 9 sheets / min. (540 sheets / hour) Format: min: 210 mm (wide) x 210 mm (long) Max: 320 mm (wide) x 650 mm (long) Gramatur (gr / m) : min 110/ max. 300 Equipment / Additional information: Creasing: 1 x creasing knife across the sheet running direction Max. Programmable 10 creases, programmable in steps of 0.1 mm

Econiche data: Drilling rig 345-31 WHT-No. 147-0338 SNr. 103 563 Linear unit M4: Fanuc, type: Beta is 4/4000 HV A06B-0064-B203 Motor: plug version with resolver Resolver line and motor cable: PM505CBL2040B 10 319V 50Hz 2.3A 3.5Nm , 3000 rpm Drill tape M3: Astro, type: ASM 46 SG10 3-400V 50/60Hz 65/60mA 4/4,8min-1 Spindle drive M1: Bonfiglioli, type: BN 132 S 6 No. 802002 Cod: 8D62030016-519951 230V / 460V 13.5A / 7.8A 50H7 940 min' 3kW cosQ 0.76 IP 55 IsKI.F Lifting drive M2: Fanuc, Type: Beta 22/2000 HV is A06B-0086-B503 Motor: in plug version with resolver and brake Resolver line and motor cable with brake: PM505CBL2020B 5 448V 50Hz 3.4A 22Nm, 2000 rpm Insert tape M10 : SEW / Maschienenbau Kitz, Type: WF 10DT56LA/TF Product number: 01.1230640901.0001.08 230V / 400V 50Hz 0.80/0.46A 0.12kW 1600 rpm cos 0.68 Delivery belt M11: SEW / Maschienenbau Kitz, Type ...

Transducers, power transducers, active power transducers, analog-to-analog converters, frequency-to-analog converters, frequency dividers -Manufacturer: ATR Industrie-Elektronik, frequency divider -Type: DM1 B -Dimensions: 75/23/H110 mm -Weight: 0.1 kg

Packaging thermoforming machine (thermoformer, roll packing machine) characterized by the production of packaging from two rolls of foil. Depending on the type of machine and the foil used, the packages may be soft or hard. Machines intended for packing food and non-food products. Producer: Multivac; Model: CD6000 MC; Year of production 1997; SKIN packing machine; Working only with hard foil; Incomplete machine (see photos) Bottom foil: +/- 460 mm (approx); Upper foil: +/- 450 mm (approx); Molding length: 492mm; Forming width: 408mm; Molding depth: 15mm; Formats: 3.2; Length: 7200 mm; Width: 1100 mm; Height: 2000 mm; Weight: 1700 kg.

Packaging thermoforming machine (thermoformer, roll packing machine) characterized by the production of packaging from two rolls of foil. Depending on the type of machine and the foil used, the packages may be soft or hard. Machines intended for packing food and non-food products. Producer: Multivac; Model: CD6000 MC; Year of production 1996; SKIN packing machine; Working only with hard foil; Incomplete machine (see photos) Bottom foil: +/- 460 mm (approx); Upper foil: +/- 450 mm (approx); Molding length: 266mm; Forming width: 408mm; Molding depth: 15mm; Formats: 3.1; Length: 6500 mm; Width: 1100 mm; Height: 2000 mm; Weight: 1600 kg.

Depalletizer is used for unloading new bottles, delivered on pallets. After clamping one whole row from bottles layer by gripping head, the device delivers them to the unloading table, and the bottles are transported to the washing machine or filling machine. - Capacity up to 6 000 bottles / hr. - Operation - 1 person - Dimensions of bottles: - diameter 20 to 120 mm - height from 50 to 350 mm - Lifting height to 4m, - lifting capacity – to 40 kg - Lifting speed - 7m / min - Speed - 7 m / min - Enviroment temperature - 5 to 45 degrees C - Total power requirement - 0,8 kW - Air Pressure - 0.5 - 0.6 MPa / stable /

Centrifugal fan, dust extractor fan, fan, extractor, dust fan -Motor: HEW type EEXF 132S/2 -Motor power: 4.6 kW -Speed: 2880 rpm -without: housing -Impeller outside: Ø 415 mm Sheet metal plate hole circle: Ø 470/13 mm -Dimensions: Ø 500/595 mm -Weight: 68 kg

Various high-quality grinding wheels DM= 220mm, width 30 + 40mm, open-pored grain size 80 - 100- 120. Can be used for JUNG with bore dm 76.2mm, intermediate ring made of aluminium dm 76.2/50.8mm available.

Double end tenoner Schwabedissen Type: DAa 200 Working width 1000 mm 3 motors per side: Saw 8.3 kW swivel Milling machine 4.5 kW swivel Milling machine 4.5 kW swivel Chain track with cam spacing 380 mm Lower chain projection 500 mm External dimensions 3600 mm x 2340 mm

Sugar dissolving station Type Pulsmaster PI 7/7/10 Capacity: Contimol 6.000l/h

We clear our grinding wheels warehouse, there are new wheels unused, undamaged. They are exclusively ceramic-bonded discs. Diameter from 200 mm - 500 mm Width from 10 mm - 40 mm Different bonds and hardness. Please contact us so that we can make you an offer. The discs are sold at reasonable prices.

Carsoe Cleanline Denester with Buffer  The systems decouples the trays fast and with precision in order for them to proceed further into the packaging line. Tray dimensions 130 x 145 mm Cleanline buffer is capable of loading up to 150+ trays a minute automatically.

Used lifting kneader DIOSNA, type: S 20 3G -In bakery condition- - for 20 kg dough - 3 gears - Machine runs very smoothly - very nice condition Inspection and test run are of course possible by arrangement.

Dissolver Drais RN-PI EX protected version Power 6,8 kW/ 0,75 kW Speed range 0-4000 1/min Toothed disc 20cm Very good condition, straight from production!

Diatomaceous earth filter plant for wine 2.000-10.000l wine per hour in very good condition Condition as in the pictures Sale price 4.000,00€ basis for negotiation For viewings please contact me.

Belt grinding station, support table with T-slot, Sanding belt width 100 mm, Sanding disc D 300 mm, with support table 350 x 140 mm, Suction connection available. Motor power: 0.9/ 1.3 kW 400 V/ 50 Hz 1450/ 2900 rpm Connection cable with CEE plug 16 A Machine dimensions: H 1450 x D 410 x W 900 mm Weight approx. 200 kg Transport vertical, bolted to EURO pallet.

Centrifugal fan, dust extractor fan, fan, extractor, dust fan -Motor: Siemens type 1L4 206-6AA60-Z 200L -Motor power: 18.5 kW -Speed: 975 rpm -without: housing -Impeller outer diameter: 960 mm -wing height: mm -Dimensions: 1425/1115/H1390 mm -Weight: 412 kg

Dowel hole drilling machine Fabr. Scheer Model: DB5 Drilling gear with 21 spindles Swivel Spindle distance 32mm Archive image! Original pictures will follow soon or on request

Vibro discharge tray DAXNER VAB 1200 0.525 kw power Spout ø 120 mm Counter flange

DAXNER vibratory discharge floor type VAB 900 VA version Engine Italvibras 0.45 kW Discharge ø 200 mm with flange The machine has been tested in our workshop

Ventilation duct, ventilation flap, ventilation system, filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings, louver damper, pressure relief damper -Lucoma: Pressure relief valve DRK 370 x 405 mm -Dimensions: 370/405/165 mm -Weight: 5.3 kg

Key data: 16 , 20 , 400

Hood unit 20 kVA PRP Power: 20 kVA / 16 kW PRP Operating mode: 1500 rpm Voltage: 400/230 V Power factor: 0.8 Stage 3A Engine: Deutz | F3M2011 Generator: Leroy Somer | TAL040 F Aggregate control: Automatic control panel WITHOUT Switching and WITHOUT mains control with Comap IL-NT AMF8 1 x 4-pole circuit breaker Leak detector Battery disconnect switch Battery charger Cooling water heating Voltage regulator Tank: 100 L / 21.3 hours at 75% load

Angle for filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings -ALUDEC 112 Ø 180 x 10 MTR -Dimensions: 815/220/220 mm -Weight: 3.9 kg

Key data: 80 , 200 , 400

Hood unit 100 kVA PRP Power: 100 kVA / 80 kW PRP Operating mode: 1500 rpm Voltage: 400/230 V Power factor: 0.8 Stage 3A Engine: Deutz | BF4M1013EC Generator: Leroy Somer | TAL044 D Aggregate control: Automatic control panel WITHOUT Switching and WITHOUT mains control with Comap IL-NT AMF8 1 x 4-pole circuit breaker Leak detector Battery disconnect switch Battery charger Cooling water heating Voltage regulator Tank: 145 L / 9 hrs. at 75% load

inverter, data processing device, data logger -Manufacturer: Wilmers, wilog Data Logger -Housing: 0903-35-OP303 -Mounting parts: see photos -Dimensions: 500/300/215 mm -Weight: 11.6 kg

Angle for filter system, chip extraction, dust extraction, extraction system, ventilation ducts and fittings -ALUDEC 112 Ø 254 x 10 MTR -Dimensions: 815/270/270 mm -Weight: 5.3 kg

Container rotating device, welding rotating device, roller stand, rotators, pipe straightening system, steady rest -Roller diameter: Ø 80 mm -Roller spacing: 90 mm -Dimensions: 300/100/H118 mm -Weight: 7.7 kg

Flange mounting, driving flange -Chuck flange with: driving pin -Outer: Ø 325 mm -Cone diameter: 139 mm -Weight: 20 kg

Flange mounting, driving flange -Chuck flange with: driving pin -Outer: Ø 250 mm -Cone diameter: 140 mm -Weight: 13 kg

Flange mounting, driving flange -Chuck flange with: driving pin -Outer: Ø 260 mm -Cone diameter: 106 mm -Weight: 11 kg

Diesel particulate filter Deutz 04603903 F035D00908 1X04604124 11600013335527 GP3403702 20131106

Deutz TCD 6.1 L6 diesel engine with Miretti Ex conversion for a diesel cat mining etc. See pictures ! No mails are answered, what is the price! Ask for quotes, my phone number is on file! Won't give a price ! There are two engines available ! If you send me your email address, I can send you more photos !

High-frequency ignition device, heating, gas and oil burners -Type: E4718/54 -Dimensions: 85/70/H40 mm -Price: per piece -Number: 12x available -Weight: 0.3 kg/piece

Screening drums suitable for all common screening machines such as Doppstadt SM 314 / SM414 / SM518 / SM618 / SM620 / SM720 / SM 725 Terra Select T4-T7, Komptech Maxx, Mustang, Nemus , Cribus , Pronar , Terex Neuenhauser and others - Manufactured according to your specifications: - Perforation (also variable within the drum) - Square or round perforation - offset or straight - smallest webs - welded-in spiral - in various material thicknesses - Perforated plates sharp-edged in the highest quality - Perforated plates made of special steel We deliver our drums free of charge. Many models in stock without waiting.

John Deere tractor ready to drive Type UTC102LS Year of construction: 1993 Perkins Engine 46446

Deutz TCD 6.1 L6 engine Miretti Ex conversion diesel trolley mining

Bending tool, die, lower tool, die tool, folding tool, press tool, forming tool -Die tool: Forming tool / Press tool -Profile: Ø 45 mm -Dimensions: 535/195/H140 mm -Weight: 35 kg

1. Disk Spring 2093F Ø80 x Ø36 x 4 mm - 5,400 pcs 2. Clamping Tool Large - 6 pcs For OD: 28 inch (711.2 mm) to 64 inch (1625.6 mm) Includes: Clamping Adapter Large; Cylinder Revolving Connector; Pants Rotating Coupling (3 m); Pneumatic Foot Pump XA12G

Injection pump diesel pump JCB Stanadyne A3 DB4429-6101 Condition: as good as new (test run ex works) Manafacture: Stanadyne Part Number: A3 DB4429-6101 JCB number: 320/0674 On sale are 40 injection pumps from 2012 to 2020. The pumps were subjected to a test run at the factory. When we arrived at our premises, they were staked out, dismantled and stored.

Dust extraction, welding fume extraction, filtering, self-cleaning, pneumatic, vacuum dust extraction, absorbers for plasma, lasers, sandblasting and all types of dry dust. Donaldson Torit Model: 4DF 16 EX Cartridge filter cartridges, which are pneumatically cleaned by pulses of compressed air during operation, resulting in high efficiency of the device. The fan is located behind the filter on the clean side, which reduces the risk of explosion to a minimum. Year of manufacture : 1997 Voltage: 3x 400V Power : 15kW Frequency : 50Hz Capacity : Unknown Dimensions can be measured if necessary.

Dust extraction, welding fume extraction, filtering, self-cleaning, pneumatic, vacuum dust extraction, absorbers for plasma, lasers, sandblasting and all types of dry dust. Donaldson Torit Model: 2DF 4C EX Cartridge filter cartridges, which are pneumatically cleaned by pulses of compressed air during operation, resulting in high efficiency of the device. The fan is located behind the filter on the clean side, which reduces the risk of explosion to a minimum.

Dust extraction, welding fume extraction, filtering, self-cleaning, pneumatic, vacuum dust extraction, absorbers for plasma, lasers, sandblasting and all types of dry dust. Donaldson Torit Model: 2DF 4C EX Cartridge filter cartridges, which are pneumatically cleaned by pulses of compressed air during operation, resulting in high efficiency of the device. The fan is located behind the filter on the clean side, which reduces the risk of explosion to a minimum. Year of construction: 1995 Voltage : 660 V Power : 4 kW Frequency : 50Hz Capacity : Unknown

Dust extraction, welding fume extraction, filtering, self-cleaning, pneumatic, vacuum dust extraction, absorbers for plasma, lasers, sandblasting and all types of dry dust. Donaldson Torit Model: Unknown Cartridge filter cartridges, which are pneumatically cleaned by pulses of compressed air during operation, resulting in high efficiency of the device. The fan is located behind the filter on the clean side, which reduces the risk of explosion to a minimum. Year of manufacture: Unknown Voltage : Unknown Power : 18,5kW Frequency : 50Hz Capacity : 3.33 m³/s approx. 20.000m³/h The plants are all dismantled and stored on pallets

Diaphragm regulator for regulating valves -Differential pressure controlled membrane regulator: 0.1 - 0.3 bar -suitable for: Kombi 3 Plus -Return: DN10 - DN40 -Number: 12x available -Price: per piece -Weight: 0.5 kg

Air dryer ALUP 16/30 bar 230 V 16 A R 134a Unchecked

Digital input module, control, switchgear, PLC -Inputs: 16 -24 V DC -Product number: 7DI439.7 -Dimensions: 82/115/H60 mm -Weight: 0.2 kg

Agilent 5973 MSD Detector,Network/LAN Connector, Diffusion pump, completely overhauled

Linear drive, linear gear, screw jack, spindle drive -Pneumatic linear drive -Festo type: DGO -. -Stroke: 490 mm -Shaft: Ø 22 mm -Dimensions: 42/42/705 mm -Weight: 1.05 kg