perkins generator used for sale

v.v. 2800 maximum watts; 212cc OHV engine; 50 Hz; mounting kit; steel frame; 15L fuel tank; 3000rpm; unused; 3901 Auction-ID: A1-49373-71

The Fluke 54200M01 is a professional TV signal generator designed for testing and calibrating TV receivers, VCRs, and other video terminals. It supports multiple TV standards and offers a variety of test patterns and audio capabilities. - Multi-standard color image sample generator for PAL, NTSC and SECAM - Ideal for service, development and production of TV and video equipment - Supports 4:3 and 16:9 formats - Microprocessor-controlled with storable settings Frequency range: 32 – 900 MHz Channels: TV-IF ranges, I–V, special channels S1–S20, Hyperband H21–H40 Image pattern combinations: over 500 Audio output Analog mono/stereo, NICAM, BTSC RF output: 100 mV / 10 mV, adjustable to -80 dB Video output: 1 V into 75 ohms, adjustable 0–1.5 V Memory: up to 99 settings Dimensions (W × H × D): approx. 323 × 147 × 417 mm Weight: approx. 10 kg Auction-ID: A7-49816-83

Unused; ATS; rated output 80kw/100kva; standby 88kw/110kva; P.F. 0.8; RPM 1500; 135 liter tank; 3 PHASE; altenator type 274C; ATS 160A; GENSET controller with LCD; 2 batteries; v.v. CE and QC; sleds incorporated in frame; 7505 Auction-ID: A1-49373-9

15 liter fuel tank; 2x AC230; 212CC; 230V; IP23M; speed 3000/min; 5623 Auction-ID: A1-49373-64

electric start; mounting kit; 50Hz; 230V 6/6.3kva; 400V 7.5/7.9kva; steel frame; 14L fuel tank; 92dB; unused in packaging; 4448; Auction-ID: A1-49373-15

Used as an emergency power generator (NSA). Number of operating hours: approx. 600 hours. Stamford generator type HC63462. MHI Electric motor 642kW type S 12A2 PTA. Includes 2x dampers. Auction-ID: A1-49552-58

max. wheel diameter:275 mm gear width:55 mm max. module:6,5 min. module:1,5 Face Hobbing-Continious Process Continuous process: The workpiece and tool (usually Spiron) rotate at the same time, and all teeth are created in one operation at the same time. Knife head has several knife groups (not arranged in a circle) Parallel tooth Conical tooth tip surface Single Item procedure: The workpiece is stationary and the tool (usually Arcon) rotates and cuts a tooth by immersing the tool. Once a tooth is cut, the tool moves out of the tooth again, the workpiece divides by one tooth width and the next tooth is cut until all teeth are finished. Knife head has arranged all knives in a circular path. Conical tooth height Parallel tooth head surface C28 can do both, wheel + pinion. However, a C28 must be ?prepared? for the individual part procedure. I.e. direct measuring system + part gear brake, w ...

max. wheel diameter:275 mm gear width:55 mm max. module:6,5 min. module:1,5 Face Hobbing-Continious Process Continuous process: The workpiece and tool (usually Spiron) rotate at the same time, and all teeth are created in one operation at the same time. Knife head has several knife groups (not arranged in a circle) Parallel tooth Conical tooth tip surface Single Item procedure: The workpiece is stationary and the tool (usually Arcon) rotates and cuts a tooth by immersing the tool. Once a tooth is cut, the tool moves out of the tooth again, the workpiece divides by one tooth width and the next tooth is cut until all teeth are finished. Knife head has arranged all knives in a circular path. Conical tooth height Parallel tooth head surface C28 can do both, wheel + pinion. However, a C28 must be ?prepared? for the individual part procedure. I.e. direct measuring system + part gear brake, w ...

max. wheel diameter:275 mm gear width: mm max. module: weight of the machine ca.:9,4 t dimensions of the machine ca.:3,7 x 3 x 2,82 m min. number of teeth:5 max. number of teeth:2000 range of tooth size:20 mm max. gear width (internal machining):58 mm X-axis:325 mm y-axis:350 mm Z-axis:475 mm Bevel gear milling machine Gleason Pfauter including Promot Automation