perforating machines used for sale

Description MR 3214 automatic labeler for precise labeling of product tops with self-learning scanner and conveyor belt for efficient, accurate and precise labeling for the best product appearance

Polar 92 E Year of Make: 1996 E version, color monitor, Air table, 2x side tables, Spare blade Very good condition!

Ultrasonic sensor, ultrasonic generator, ultrasonic transducer, ultrasonic plastic welding machine, lowering unit for ultrasonic welding machines, lowering unit - flatbed, lowering column -Manufacturer: Nucleus, Absen column 35 for ultrasonic welding machines -Eco FR361101 -Servo motor: Dunkermotoren GR 42x40, voltage 24 V -Receiver: Shaft Ø 20 x 18 mm see photo -Dimensions: 270/230/H85 mm -Weight: 2.5 kg

Working area 1Longitudinal700 mmCross420 mmVertical380 mmGeneralHigh dynamic Vertical Drill-Tap centre with best milling performance; Control: 3D-control Siemens 840D sl Operate Technical DataFeed rate longitudinal/transverse/vertical60000/60000/60000 mm/minRapid traverse longitudinal/transverse/vertical60/60/60 m/minMain driveDrive power (100% DC) 6 kWDrive power (40% DC) 8,5 kWClamping System ISO 7388-3 - JD30Spindle taper BT 30Speed range 20 - 10000 rpmTorque (40% DC) 48 NmTorque (100% DC) 41 NmIntegrated swivel rotary table simultaneousIntegated swivel rotary table 5-Axis simultaneous mode! Torque drives incl. direct measuring in A- and C-Axis Swivel range A-Axis -120 / + 100 degrees Max. load C-axis 100kg Table diameter C-Axis d290mm Inclusive Software package Sinumerik Mdynamics 5-axRotary joint, 4 channelsRotary joint for integrated swivel rotary table with torque drives 4- channe ...

internal diameter: 200 mm grinding depth: 80 mm swing diameter: mm stroke of the table: X= 300 mm stroke of the table: Y= 500 mm control: FANUC 18i-TA total power requirement: 7 kW weight of the machine ca.: 2,5 t dimensions of the machine ca.: 2,950x2,330x1,640 m O K A M O T O High-Precision Internal Cylindrical Grinding Machine with FANUC CNC Control, System 21 i – TA, 2-Axis Simultaneous Machining For machining bores, end faces, and outer diameters in a single setup TECHNICAL DATA Internal grinding diameter: (6) - 100 mm Grinding depth approx.: 80 mm Max. table stroke: X-axis 300 mm Z-axis 500 mm Swing diameter over table: 600 mm Swing diameter in chuck cover: 260 mm Table speed: (X/Z-axis) 0.1 - 10,000 mm/min Swivel angle of workpiece spindle: -5 to +15 degrees Smallest input increment: X-axis 0.0001 mm Z-axis 0.0001 mm Workpiece spindle speed: 100 - 850 rpm Grinding spindle speed ...

workpiece diameter: 5 - 1.000 mm module range: 0,2 - 25 helix angle: < 90 ° Control: Wenzel GearTec faceplate diameter: 750 mm x-axis: 1.200 mm y-axis: 550 mm z-axis: 1.000 mm total power requirement: 6,5 kW weight of the machine ca.: 11 t dimensions of the machine ca.: 3,30 x 3,15 x 2,70 m Software: BMain, FPDFPPostAction, GrafTool, TAlign, TAnalyse, TApplication, TCali, TCut_INPUT, TCut_MEAS_EVAL, TGear_INPUT, TGear_MEAS_EVAL, THob_INPUT, THob_MEAS_EVAL, TMesblatt, TPlot, TRoot_INPUT, TShaft_INPUT, TShaft_MEAS_EVAL, TStat, TStylus, WMI, wingeco. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel St 60: 30 mm bore capacity in cast iron GG 20: 30 mm Drilling capacity in St 60: 30 mm threading in St 60: M 16 threading in GG 20: M 20 Short spindle: MK 3 spindle stroke: 140 mm throat: 293 mm column diameter: 115 mm Machine table - usable table surface: 514 x 360 mm T-Slots Amount - Width - Distance: 2 x 14 x 224 mm Distance spindle-table min.: 132 / 724 mm feed: von Hand spindle turning speed - stepless: 100 - 1.800 U/min total power requirement: 1,0/1,6 kW weight of the machine ca.: 260 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

gear hobbing diameter - external: 1200 mm gear hobbing diameter - internal: 1200 mm gear hobbing width -max.: 260 mm max. workpiece diameter: 1500 mm Control: Siemens 840 D table diameter: 900 mm Table hole Diameter / depth: 320 / 520 mm max. table load: 95 kN coolant pump: 120 l/min Axial distance between thrust spindle - table: 0-820 mm work-spindle diameter: 125 mm tool taper: SK 45 DIN Table rpm: 12 1/min power requirement: 30 kW weight of the machine ca.: 24 t dimensions of the machine ca.: 11,715 x 5,565 x 4,505 m Strokes: - Stroke length min./max.: 0 mm / 270 mm - Stroke length adjustment range: 270 mm - Stroke rate (double strokes): 10 to 270 strokes/min Sliding head carriage: - Max. travel speed: 5000 mm/min Machine bed: - Axial travel: 600 mm Slotting head: - Max. module for rolling slotting: 16 mm - Slotting spindle diameter: 125 mm - Max. tool diameter: 30 ...

swing diameter: 2000 mm turning height: 1800 mm Control: Siemens Sinumerik 840 Dsl turning speeds range: 2,8-315 U/min cross rail adjustment - vertical: 1200 mm cross rail adjustment - horizontal: +/- 1150 mm : 1500 mm bit feeder section: 240 x 240 mm Minimum immersion diameter: 340 mm cutting capacity: 50 kN max. torque on the faceplate: 50000 Nm speed range step 1: 2,8 - 80 U/min speed range step 2: 12 - 315 U/min Max. clamping weight: 12000 Kg power capacity faceplate: 105 kW weight of the machine ca.: 33 t dimensions of the machine ca.: 10 x 5 x 6,5 m Further technical data: - Feed range of three-phase servo motors: 1–3000 mm/min, 0.01–50 mm/rev - Crossbeam travel speed: 425 mm/min Features/Accessories - Increased turning height (+600 mm) - Z-axis extended to 1500 mm - Magazine capacity: 20 positions - Magazine type: disc magazine - Max. tool length: 525 mm - Chi ...

Number of boring spindles: 5 St. Working width: 230 mm Working height: 120 mm Length of the planing table: 2.000 mm Feed motor: kW Planing and moulder Weinig Profimat 23 for four-sided planing and profiling of timber incl. a set of planing heads. Including dismantling and loading. Fixed loading date: 15.06.2026. Spindle 1: Bottom Spindle 2: Right Spindle 3: Left Spindle 4: Top Spindle 5: Bottom The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The machine is in good technical condition, after prior agreement it is possible to test it. We offer the grinder separately, without extraction and track. For straight round or oval pipes.

The machine is in good technical condition, testing is possible by prior arrangement.

Key data: 6400 mm, 2 mm

Double bending machine, type TwinPro, with roller shears, Attachment rail, brush table, autom. Sheet thickness adjustment, pneum. Clamping finger Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Working length: 6400 mm Sheet thickness max. steel:2.0 mm Sheet thickness max. aluminium: 3.0 mm Sheet thickness max. VA: 1.25 mm Back gauge (min.): 15 mm Back gauge (max.):1125 mm Projection: 1300 mm Colour: anthracite/light grey/silver Total power requirement: 20 A Weight: 9250 kg Upper beam lift opening width: 200 mm with sheet thickness adjustment Bending Angle (Max):140 degrees Crowning on the bending beam Roller shears: SL3/3.0 mm Number of stands: 6 pieces Insertion depth: 1300 mm Machine number K14023

Key data: 6020 mm, 1 mm

with hand lever control, manual roller shears, robust and easy to operate Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is being carried out Working length: 6020 mm Sheet thickness steel: 1.2 mm Sheet thickness aluminium: 1.5 mm Colour: green Total power requirement: 1.5 kW Dimensions: 6600 x 1700 mm Machine weight: 1800 kg with roller scissors Bending angle (max.): 135 degrees Insertion depth: 960 mm Upper beam stroke: 140 mm Maschinennummer/machine number 6961

Key data: 2500 mm, 1 mm

with segmented tools on the upper beam, Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Working length: 2500 mm Sheet thickness steel: 1.5 mm Sheet thickness aluminum: 2.0 mm Sheet thickness front: 1.0 mm without backgauge (max.) Colour: green Total power requirement: 400 V Machine weight: 2200 kg Dimensions: 3500 x 1800 x 1600 mm Machine Number: 1808

Year: 2005 - technically efficient, ready to work – after full service - two pneumatically tiltable beams (resistance and pressure) - adjustable height: 500 mm (liftable) - working length: 2700 mm

Code: 0351 Brand: VOLPATO Model: LS - 1N - CE Standard Automatic edge sanding machine for edges and profiles in wood, solid wood, veneer, painted and various materials - CE Standard Technical data Max working height mm 110 Min working length mm 100 Variable-speed belt feed 5–30 m/min – Motor Kw 1,5 Tilting oscillating sanding unit – 2-speed motor 700–1400 rpm – Power 2 Hp Pneumatic belt tensioner – Timed entry and exit of the pad Mechanical oscillation of abrasive belt 0/20 mm Lifting and tilting via handwheel with special key Removable support for large panels Abrasive belt dimensions 80 x 2450 mm Suction inlet diameter 100 mm Compressed air 5–6 atm Overall dimensions mm 2600 x 1400 x 1500 h Weight kg 720

a threading machine > - Manufacturer: Rothenberger > - Model: Supertronic 4 SE > - Age: approx. 1 year > - Condition: Very good, technically perfect, little used > - Accessories: 2 threading heads included > - Invoice: available

Code: 0354 Brand: JET/USA Model: DDS 225 - CE Standard Automatic 2-roller calibrating sanding machine for wood, furniture, joinery, custom made furniture, panels, wooden joinery, plastics and various materials – CE Standard Features: Sturdy construction Outfeed roller adjustment independent of the infeed roller Hard rubber coating on the rollers 2-speed conveyor belt Working width 635 mm Min workpiece length 230 mm Min workpiece height 0,8 mm Max workpiece height 133 mm Roller dimensions 152 x 635 mm Roller rotation speed 1400 rpm Conveyor belt speed 2–3 mt/min 2 suction inlets diameter 100 mm each Power output 5 Hp Enclosed base with door Abrasive belt 80 gr Abrasive belt 100 gr Overall dimensions mm 1150 x 1150 x 1050 h Weight kg 330

2008 Spindle module replaced Circumferential diameter over bed 630 mm Circumferential diameter over support 370 mm Spindle through bore 105 mm the machine is delivered with a 250 mm manual chuck. Spindle speed range 1: 4 - 430 rpm. Spindle speed range 2: 430 - 2500 rpm. Main motor power: 18.5kw S6-40%

Offer 26001 Technical data: - Horizontal + vertical working position - 3 mot. Driven rollers - hydr. Left lower roller regulation - Hydraulic cylinder pressure capacity 4 t - Shaft diameter 35 mm - Shaft rotation 11 rpm - Roller diameter 132 - 142 mm - Drive 400 V 1.1 kW - Bending capacity approx. - Round tube Ø 800 60 x 1.5 mm - Flat steel Ø 400 90 x 15 mm - Square steel Ø 400 30 mm - With: - Separate control panel with digital display - E – Footswitch in sep. Control panel for right / left run - Standard bending kit for flat and angle material - 6 tube roller sets 22 + 28 + 33 + 42 + 48 + 60 mm - Weight approx. 450 kg - Space requirement approx. W 700 x H 1150 x D 950 mm

Offer 26125 Technical data: - Cutting length up to 150 mm - Cutting thickness - at 400N/mm² strength 4 mm - at 700N/mm² strength 3 mm - Cutting angle infinitely adjustable 30° - 120 ° - Pneumatic clamping of the cutting angle adjustment - Stroke 22 mm - Stroke rate 60 1/min - Table support surface with T-slots and depth stops - Table height 900 mm - Drive 400 V / 3 kW - E - Footswitch - Space requirement approx. W 1000 x H 1150 x D 1400 mm - Weight approx. 850 kg

Inv. Num. : 9073 Type: FP 4 MA Producer: DECKEL Created: 1998, GO 2003 Parameters: Control system: HEIDENHAIN Work table length: 800 mm Work table width: 465 mm Maximum vertical spindle speed: 4000 1/min X-axis travel: 465 mm Y-axis travel: 370 mm Z-axis travel: 380 mm Machine height: 1734 mm Machine length: 2000 mm Machine width: 1600 mm Machine weight: 1720 kg

I am happy to offer this extremely well-maintained RD 1300 for Feb / March 2027. Equipment: Doesn't even run in 1 shift operation only for self-joinery! ROBOT-Drive carpentry machine (mirror machine) version 1250 mm for machining cross-section min. 20x50 mm to max. 300x1300 mm incl. inlet/outlet roller conveyor Production program CAMBIUM Line laser for component referencing Control unit for disposal with control knobs Movable control panel on castors Blow-off device chips Pressure booster for ROBOT Timber flow direction from right to left (mirror machine) Automatic feeding system with buffer function – AQF 7 strings Extension of automatic conveyor for timber length 16 m Soft start for automatic feeding 5-axis sawing/slotting/marking unit Horizontal drilling unit 2.2 KW Slot tool interchangeable Extension of the conveyor roller conveyor for 13 m of timber length L ...

Sandretto Nove HP 100 Injection Moulding Machine + Chiller & Hoist Overview Excellent opportunity to acquire a complete plastic injection moulding cell. This lot features the reliable Sandretto Nove HP 100 industrial injection moulding machine, capable of processing a wide variety of polymers (PP, PE, ABS, PS, PA, PC). To provide a complete turnkey solution for your manufacturing floor, the sale also includes the original Sandretto Nove chiller (cooling unit) and a Sandretto Otto 150 hoist. Clamping Unit Specifications Clamping Force: ~100 Tons (≈ 980 kN) Tie-Bar Clearance: ~410 mm (16.14") Maximum Mould Opening: ~460 mm Minimum Mould Thickness: ~100 mm Clamping Type: Hydraulic 4-tie-bar system Injection Unit Specifications Screw Diameter: Variable (approx. 30–45 mm depending on version) L/D Ratio: ~18:1 to 22:1 Injection Pressure: Up to ~1500–2000 ...