perforating machines used for sale

Offer 26067 Technical data: - Working range 1.5 - 60 mm - Sharpening angle adjustable from 40° - 180° - mot. Sharpening device - 6 jaws chuck - Coolant device - Lighting - Drive grinding head 400 V / 0.38 kW - Drive electrospindle 400 V / 0.18 kW - Space requirement approx. W 750 x H 1200 x D 750 mm - Weight approx. 100 kg

Center width approx. 800 mm, center height approx. 150 mm, clamping bush, tool change turret, manual tailstock, power 4.0 kW,

IBS G60 is a mobile gravimetric concrete mixing plant capable of producing not only cement mixtures, but also cold asphalt, recycled cold asphalt, soil stabilization mixtures and soil remediation mixtures. The machine is equipped with two separate aggregate hoppers (5 m³ each), a cement hopper (3 m³), and a water tank (1000 L). Additionally, it can be fitted with two tanks for different types of admixtures, as well as an optional emulsion tank. This makes the unit completely autonomous and enables concrete production directly on the construction site, providing significant economic advantages and ensuring high-quality concrete production. The machine is easy to operate and requires only one operator. Mix recipes are defined by entering the desired quantities of each component through the control panel. At the end of the production process, the machine prints a report containing the  ...

Key data: 630 mm, 2 mm, 5 kW

General Technical Features   • Planing width: 630 mm • Weight: approx. 1,200 - 1,400 kg • Planing height: 2.8 - 300 mm • Table length: 1,260 mm • Min. workpiece length: 270 mm • Operation: 1-axis control for planing dimension, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence; Pushbutton for manual quick and fine adjustment of the planing thickness according to digital display, push button for knife shaft start and stop, integrated operating hour counter   • Thickness table: Electr. Thickness table adjustment with fine adjustment, travel speed 10 mm/s, tilt-proof mounted on 4 supporting spindles, table surface finely planed   • Feed: 2 speeds 6 / 12 m/min, electrically selectable even during planing, large rubber feed rollers Ø 85 mm to compensate for wood of different thicknesses, rubber rollers gentle o ...

Key data: 10 , 240 mm

Four-sided planer Weinig Type: Unimat 23 / U 23 Year of manufacture 1994 CE Planing width 240 mm Planing height 160 mm (240 mm universal shaft) With 2 universal shafts 360° clamping length 240 mm Length of dressing table 2350 mm 10 planing shafts Arrangement of planing shafts and table rollers 1.Shaft bottom 7.5kw smooth driven roller in the table 2nd shaft right 7.5 kW 3rd shaft left 7.5 kW 4th shaft right 7.5 kW smooth driven roller in the table 5.Shaft top 7.5 kW 6.Shaft bottom 7.5kw smooth driven roller in the table 7.Shaft top 7.5 kW 8.Shaft bottom 7.5kw smooth driven roller in the table 9.Shaft Universal u, right, li, o 360° 7.5 kW smooth driven roller in the table 10.Shaft Universal u, right, li, o 360° 7.5 kW Smooth driven pull-out roller in the table Spindle diameter 40 mm Cardan feed, feed motor 8.6 kW Feed speed 6 – 36 m/min. Electric he ...

Hello, For sale is a Keyence IM-8030T digital measurement projector including rotation axis. The measuring machine was purchased in August 2025 and has been used very rarely since then. The complete measuring unit is immediately ready for use and immediately available. Prior sale and errors excepted.

1 x EDM machine Sodick AQ327 L BJ 2006 1 x EDM machine Sodick AG60L BJ2020

max. format 26 x 38 cm Built in 1964 Inking unit not complete 2 locking frames Dry pollinator Delivery date: immediately from stock

Built in 1990 4 drilling spindles Adjustable drill spindle spacing Stacking slider left Triggering by microswitch Delivery date: immediately from stock

Case kit with riveter for threaded inserts complete with all accessories, never used Overall dimensions: 400 x 400 x 300 mm Weight: 10 kg Auction-ID: A7-47249-205

Case kit with riveter for threaded inserts complete with all accessories, never used Overall dimensions: 400 x 400 x 300 mm Weight: 10 kg Auction-ID: A7-47248-205

Auction-ID: A7-46939-9

Case kit with riveter for threaded inserts complete with all accessories Overall dimensions: 400 x 400 x 300 mm Weight: 10 kg Auction-ID: A7-47249-343

Case kit with riveter for threaded inserts complete with all accessories Overall dimensions: 400 x 400 x 300 mm Weight: 10 kg Auction-ID: A7-47248-343

Technical data Manufacturer: Friedrich Deckel AG Model: FP4MA-2204 Machine number: 2204-2088 Control: Lid Contour 2 Tool holder: SK40 Travel X: 485 mm Travel Y: 385 mm Travel Z: 380 mm Quill stroke: 80 mm Speed range: 63 - 3150 rpm Operating voltage: 380 V / 3 Ph / 50-60 Hz Rated current: 19 A Table load: approx. 600 kg Machine weight: approx. 1830 kg Configuration - Universal milling machine with CNC control - Lid Contour 2 control - Swivelling vertical milling head - Electronic handwheel - Coolant device - Protective screens / splash guards - Machine vise, jaw width 160 mm, included - Operating instructions and documentation available - Note: occasional referencing error of the axes Auction-ID: A7-46939-94

Machine Description RÖDERS TEC RXP 500 3-axis HSC milling machine. Built in 2008. Travel paths X/Y/Z: 500 x 400 x 240 mm. Table size 550 x 450 mm. Max. workpiece weight 400 kg. HSC spindle with 42,000 rpm and HSK E40 mounting. 21-fold tool changer. Feed rate up to 40,000 mm/min. Machine weight approx. 5,500 kg. Equipment and accessories Includes KELLER Compact Separator L-CUT-2-P graphite extraction system. Extraction system built in 2008. Motor power extraction 5.5 kW. Electrical connection 400 V / 22 kVA. Compressed air connection min. 6.5 bar. Documentation and operating documents available. Auction-ID: A7-46939-70

Technical data Brown & Sharpe Derby 454 Coordinate Measuring Machine Year of Make: 1999 Measuring range: 457 x 508 x 406 mm Max. workpiece dimensions: 559 x 750 x 483 mm Max. workpiece weight: 227 kg Machine dimensions: 895 x 885 x 1575 mm Machine weight: 180 kg Repeatability: 0.004 mm Spatial measurement accuracy: 0.010 mm Measuring speed max.: 760 mm/s Compressed air: 4.8 - 8.3 bar Power supply: 100-240 VAC / 50-60 Hz Configuration ETALON Measurement Portal Renishaw TP20 probing system Probes and accessories available Granite measuring plate Manual X/Y/Z control Control panel / controller Operating manual available CE marking Condition according to photo documentation Auction-ID: A7-46939-107

Recognizable content (coarse) Twist drills Extra-long twist drills Flat drill bits Taps Conical countersink Cone countersink HSS milling cutters Reamers Morse Taper Reducing Sleeves Expulsion wedges Drill chuck Drill chuck holders Thread balancing chuck Clamping material Clamping claws Clamping screws Underlays / Spacer Rollers Dowel pins Measuring tools Scribing tools Universal Protractor Files Assembly tool Stroke rates Ring and open-end wrenches Allen key Cooling lubricants Lubricants Spare parts Various small parts and accessories Auction-ID: A7-46939-36

GeneralTurning/milling center with turning length 1100 mm - mounting HSK-A 63 DIN 69893 - B-axis ±120 - Y-axis ±100 mm - 60-fold chain magazine - Absolute, direct path measuring systems in X-, Y- and Z-axis - Hydraulically movable tailstock with foot pedal - Double switch filter - Electric handwheel - DMG MORI IoT connector - Clamping pressure adjustment on the control - 5-axis simultaneous machining; Control: CELOS X with Siemens SINUMERIK ONE Working areaTurning diameter500 mmDistance between spindles1435 mmMax. Turning Length1100 mmMain drive 1Drive power (100% DC)14 kWDrive power (40% DC)17 kWSpeed range- 5000 rpmTorque (100% DC)275 NmMax. torque (40% DC)345 NmFloor space/WeightDimensions (L x W x H)5,77 x 2,33 x 2,51 mWeight approx.10000 KgTurning-milling spindleSpindle taperHSK-A 63 DIN 69893 Spindle speed-15000 rpmDrive power (100% DC)19 kWDrive power (40% DC)22,5 kWTorque (100% ...

GeneralUniversal turning-/milling center; Control: SLIMline® Control SIEMENS 840D sl, w/o CELOS Working areaSwing diameter over guide ways500 mmTurning diameter400 mmMax. Turning Length1100 mmBar diameter max.65 mmWork spindle (left)Spindle bore87 mmSpindle diametre on front bearing130 mmMain drive 1Drive power (100% DC)14 kWSpeed range- 5000 rpmDrive power (40% DC)17 kWBench speed485 rpmTorque (100% DC)275 NmMax. torque (40% DC)345 NmTurning-milling spindleSpindle taperHSK-A 63 DIN 69893 Spindle speed-12000 rpmDrive power (100% DC)8,8 kWDrive power (40% DC)10,5 kWTorque (100% DC)73 NmTorque (40% DC)90 NmSwivelling range+/- 120 degreelocking moment850 NmTool magazineType of magazineChain Number of tools30 Max. tool diameter78 mmMax. tool-Ø with free adjacent pockets125 mmFloor space/WeightDimensions (L x W x H)5,19 x 2,11 x 2,47 mWeight approx.11200 KgTechnologie cycle alternating spee ...

Stabilized Courses X 350 Y 250 Z 300 Table 500 x 400 mm. Maximum part size to be machined 790 x 530 x 275 mm. Workpiece basin dimensions 790 x 530 x 350 mm. Linear guides. Maximum workpiece weight 500 kg. 80 A ISPG generator ITS HEAD AXIS C 16 ELECTRODE CHANGER with MINI 32 system. 410 liters dielectric tank.

Progress M-System Mesh Welding Machine, Type EVOLUTION 2012 Complete mesh welding system for the production of customised reinforcement mesh from straightened wires. Main Components MMR straightening machine with 6 wire lines SWR welding machine with 6 welding heads Technical Data Maximum mesh size: Width: up to 3,500 mm Length: up to 9,000 mm Wire diameters: Longitudinal and cross wires: 6, 8, 10, 12 and 16 mm Mesh dimensions: Maximum width: 3,500 mm Maximum length: 9,000 mm Minimum width: 500 mm Minimum length: 1,000 mm Bar dimensions and accuracy: Maximum bar length: 9,000 mm Minimum bar length: 500 mm Bar length tolerance: ±5 mm Bar placing accuracy: ±10 mm Description The Progress M-System EVOLUTION 2012 is designed for the flexible production of customised reinforcement mesh in a wide range of grid patterns, dimensions and wire diameter ...

Year of construction 2015 Operating hours: 7747 Straightening and cutting from wire coils Max. Production speed: 160m/min Wire diameter 8 - 20mm 6 wire diameters guided in parallel, Automatic and immediate selection of wire diameter Finished wire rod length: 500mm to 14000mm Rotor straightening system with hyperbolic straightening rollers (no damage to the wire surface) Fully automatic wire diameter change Shears for cutting to length 14-metre wire rod outlet and roller conveyor 6 driven reels, suitable for 5 tonne coils Beckhoff controller, network connection, online service

Key data: 40 mm, 240 mm

Machine Type: Column Drilling Machine Manufacturer: ERLO Type: TCA40 Year of manufacture: - Condition: used Offer will only be sent if a complete imprint is provided! Price 3.750 incl. 19% VAT / Fixed Price Location Warstein , Germany Reference number M-ERL-0526 DESCRIPTION We offer you a used column drill from the manufacturer Erlo. Performance in steel 40mm Strong gear feed Overall height 2350mm Weight 650kg Incl. solid 160mm machine vise. Availability: immediately Our offer is aimed at tradespeople who are registered in the sense of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions of payment. Errors in the descriptions and offers are reserved

used tray erector for 75mm cups, format 2x5 cups. with subsequent assembly as a divisible tray of 20. Year of manufacture: Basis is from 1990, conversion to 10 tray with basic overhaul, new control SIEMENS S7 and gluing station in 2005. Capacity: 20Trays/min. Replaced by more powerful machine. Immediately available. Video available on request.

PART NUMBER 8010 SPECIFICATIONS Equipment: - plate - Pre-milling - Tape feeder - 2 glue tanks: for granules and for cartridges - currently there is hot melt glue (granulate) in the machine - guillotine – pre-cutting of the veneer - 3 pressure rollers - 2 ball cutting units - 2 milling units for edge shaping (radial milling cutters) - corner earning aggregate - scraping aggregates – for removing excess glue - Polishing units - infinitely variable feed speed adjustment 8-18m/min - element thickness 6-45mm - min workpiece length 180mm - min workpiece width 600m - max thickness of veneer fed from the roll 3mm - air demand 6-8 bar - Diameter of the extraction port 7x80mm,1x130mm - dimensions l/w/h 6650x1260x1700mm - weight 1850kg ADVANTAGES – German production – spray system – pre-milling and corner making – 2 glue tanks - Smooth feed 8-18mm  ...

Part Number: 7995 SPECIFICATIONS - max planing width 240mm - max planing height 140mm 4 spindles: 1) horizontal bottom 240mm 5.6kW 2) vertical right 140mm 5.6kW 3) Vertical left 140mm 7.5kW 4) horizontal top 240mm, electrically adjustable up/down 0.37kW - 7.5kW - diameter of all spindles 40mm - All spindles adjustable up/down and right/left - 5 pulling, toothed, torsion shafts from above, including 1 double - 2 output rollers from above, rubber, pulling - metal roller at the bottom at the exit, pulling, split - pneumatically pressed rollers - 3 clamps on the side - electric setting of planing thickness 0.37kW - length of the introductory table top 2080mm - infinitely variable feed speed control on the inverter - feed on cardan shafts - 3.7kW feed motor - central lubrication - Extraction port diameters 4x125mm - Dimensions L/W/H 3600x1650x1700mm - weight about  ...

Part number 7994 SPECIFICATIONS - max width of the workpiece 230mm - max workpiece height 130mm 7 spindle: 1) horizontal bottom 230mm 4kW 2) Vertical right 130mm 3) Vertical left 130mm (2 and 3 spindle) 11kW 4) Horizontal top 230mm 5.5kW 5) horizontal top 230mm 5.5kW 4 & 5 Spindle Electrically Adjustable Up/Down 6) horizontal bottom 230mm 4kw 7) universal 230mm, 360° adjustable 5.5kW - all spindles adjustable up/down, right/left - spindle diameter 40mm - 4 pulling input rollers from above - 4 leading, pulling, rubber, smooth shafts from above, including 3 double - metal pulling roller at the bottom - feed on cardan shafts - pneumatically pressed rollers - infinitely variable feed speed control on the inverter - 3kW feed motor - working pressure 6-10bar - Electric planing thickness setting - central lubrication of the table top - length of the introductory tab ...

Part number 7983 SPECIFICATIONS Equipment: - plate - Pre-milling cutter - Tape feeder - guillotine - Tank with glue (granulate) - 4 pressure rollers (including one rubber, 3 metal) - Front/rear ball cutting unit - 2 units for up/down edge milling with radial milling cutters - 2 scrapers – for removing excess glue, radial up/down - Earning corners - straight up/down scrap - 2 polishers - max feed speed 10m/min - min workpiece length 260mm - min workpiece width 90mm - thickness of the glued element 10-60mm - Edge tape thickness 0.5-3mm - support that slides out of the table top - total power 12.3kW - Extraction port diameter 140mm - dimensions l/w/h 5000x1520x1600mm - weight 1295kg ADVANTAGES – unpainted – pre-milling, corner making – control panel with the possibility of quick selection of ready-made work programs – German production – DTR ...

Part number 7977 SPECIFICATIONS - range of diameters of machined dowels 40-140mm - max diameter of input material 240mm - min length of input material 600mm - max machining allowance per side 30mm - 100mm diameter sleeve fitted - 18.5kW knife head drive motor - infinitely variable feed speed adjustment + front/back - 1.5kW feed motor In sequence: - Introductory trough - Gear pulling shafts 6pcs - 4-knife head - smooth pulling shafts 6pcs - Extraction port diameter 220mm - dimensions l/w/h 2660x1350x1400mm - weight 1650kg ADVANTAGES – Polish production – DTR documentation – used beam, very good condition Net price: 49900 PLN Net price: 0 EUR depending on the price 4.20 EUR (Prices may change with higher fluctuations)

PART NUMBER 7967 SPECIFICATIONS - max workpiece width 1100mm - max workpiece height 170mm 2 generators: 1) Metal corrugated roller for calibration 2) Grooved rubber roller + boot + metal roller – in advance: - Rubber roller, sliding - generator (two generators on one motor) 15kW - Rubber roller, sliding - Rubber Output Roller - blowing the tape – from below: - 2 metal sliding rollers - pulling tape - Rubber rollers, sliding 2pcs - pneumatic oscillation of belts - grinding thickness potentiometer - electric table top lift + manual (for precise adjustment) - air brake - 2 types of feed speed - working pressure 6-8bar - Diameter of the extraction port 2x140mm - overall dimensions l/w/h 1830x1670x1950mm - weight 1160kg ADVANTAGES – Italian production – 2 grinding units – unpainted – used grinder, perfect condition Net price: 77900 PLN Net  ...

good working condiiton

Key data: 220 kN, 27 g/PS, 22 mm

1.0 St. gebr. Injection Molding Machine Manufacturer: DR. BOY Type: 22 D Year of Make: 1999 Clamping force: 22 tons Tiebar spacing: 254 x 254 mm Installation height MIN, / MAX. 200 / 400 mm Screws DN: 22 mm Moulded part weight 27 g/hp

Parallel Lathe COLCHESTER type MASTIFF 1400 Between points: 2000 mm Maxi Ø on bench: Ø 535 mm Maxi Ø over saddle: Ø 380 mm Maxi diameter in brocken bed: Ø 815 mm Spindle diameter: Ø 90 mm Spindle speed: from 18 to 1400 RPM 3-jaws chuck Ø 310 mm Year of construction: 1985 Threadings: Metric + Whitworth 3 points Fixed Steady Tailstock: CM5 Scale: 2 axes NEWALL Square turret GOODSHAPE Accessories: 3 tool holders + few sets of jaws Lubricant pump Voltage: 380 V Dimensions (L x W x H): 3600 x 1500 x 1700 mm Weight: approx 3 T

Key data: 220 kN, 27 g/PS, 22 mm

1.0 St. gebr. Injection Molding Machine Manufacturer: DR. BOY Type: 22 D Year of Make: 2004 Clamping force: 22 tons Tiebar spacing: 254 x 254 mm Installation height MIN, / MAX. 200 / 400 mm Screws DN: 22 mm Moulded part weight 27 g/hp

PART NO. 7928 SPECIFICATIONS - max workpiece height 120mm - max workpiece width 1900mm - 6 brushes from above - Adjustable up/down unit - Oscillating aggregate - star-shaped grinding unit system, rotating - infinitely variable adjustment of the speed of rotation of the brushes on the inverter - infinitely variable feed speed, rotation and oscillation - main motor 7.5kW - vacuum table - two vacuum pumps 2×7.5kW - pump dimensions 1100x800x940mm - Diameter of the extraction port 4x150mm, 4x200mm - overall dimensions of the machine l/w/h 2850x2100x2400mm - weight approx. 2500kg ADVANTAGES – two vacuum pumps – with oscillation - Additional brushes included – rotating unit – German production – unpainted – original DTR documentation – used grinder, very good condition Net price: 45900 PLN Net price: 10929 EUR depending on the price of 4.20 EUR (P ...

Travels: X-axis 500 mm, Y-axis 200 mm, Z-axis 400 mm Tool holder SK 40, spindle speed 40-2000 rpm, Table clamping area 830 x 240 mm, weight of the machine 1,100 kg Equipment and accessories: • Vertical milling head with quill • Feeds and rapid traverse in all 3-axes • Various tool holders, collets • Hydraulic vise • Coolant device • Documentation • Bellows damaged

Part number 7790 SPECIFICATIONS - max workpiece width 1100mm - max workpiece height 170mm - 2 generators: - rubber roller, pressure roller 1) Metal corrugated roller for calibration - rubber roller, pressure roller 2) rubber roller, grooved + boot + metal roller - rubber roller, pressure roller - motor power of generator I and II 11kW -from the bottom: - 3 metal rollers, sliding - pulling tape 2 metal rollers, sliding - pneumatic oscillation of belts - Electric + manual table lifting (for precise adjustment) - 2 types of feed speed - with air brake - working pressure 8bar - Diameter of the extraction port 2x160mm, 4x100mm - overall dimensions l/w/h 2000x1600x2100mm - weight 1170kg ADVANTAGES – unpainted – Italian production – 2 generators – DTR documentation – used grinder, very good condition Net price: 36900 PLN Net price: 878 ...

Key data: 17000 kN, 120 mm

Key parameters: - Clamping force: 17,000 kN (1,700 tons) - Injection unit: 12060 - Screw diameter: 120 mm - Shot volume: up to 7,729 cm³ - Injection pressure: up to 2,300 bar - Injection capacity: up to 1,875 cm³/s - Opening stroke: 2,550 mm - Maximum panel spacing: 3,350 mm - Panel size: 2,420 × 2,170 mm - Drive power: 176 kW - Control: ENGEL CC300 - Control language: English Equipment of the machine: - ENGEL ecodrive servo hydraulics for energy-saving operation - iQ weight control - iQ clamp control - iQ melt control - Autoprotect process monitoring - 92-zone mold heating control - Hydraulic and pneumatic core pulls - Ceramic heaters - Cylinder insulation - ecograph / ecobalance system - MES preparation – EUROMAP 77 / OPC UA - Complete Euromap interface set - Extended tool cooling system - Special design for the automotive industry - Documentation in  ...

PART NUMBER 7753 SPECIFICATIONS - max diameter of machined dowels 130mm - 110mm bushing fitted - max diameter of input material 160mm - min length of input material 800mm - max machining allowance per side 15mm - 15kW knife head drive motor - 3 types of feed speed + front/rear - 1.1kW feed motor In sequence: - 3 toothed pulling shafts - 3-knife head - 3 smooth pulling output shafts - Dimensions L/W/H 3100x1400x1500mm - weight 2100kg ADVANTAGES – Polish production – 3-knife head – used beam, very good condition Net price: 32900 PLN Net price: 7833 EUR depending on the price 4.20 EUR (Prices may change with higher fluctuations)

Auction-ID: A7-47277-3066

Tucker dce1500 + ETF21D stud welling Auction-ID: A1-47219-129

Tucker dce1500 + ETF21D stud welling Auction-ID: A1-47219-133

Tucker dce1500 + ETF21D stud welling Auction-ID: A1-47219-137

Tucker dce1500 + ETF21D stud welling Auction-ID: A1-47219-138

Tucker dce1500 + ETF21D stud welling Auction-ID: A1-47219-136

Technical data Manufacturer: REHM Welding Technology Model: INVERTIG 200 GW Machine Type: TIG Welding Machine Welding process: TIG (TIG) and electrode (MMA) Mains voltage: 220/380 V, 50 Hz Degree of protection: IP21 Cooling: AF Configuration Mobile welding machine TIG torch available Pressure reducer available Ground cable available Adapter cable available Pulse function and HF ignition Dimensions approx. H 2000 x L 700 x W 700 mm Without protective gas cylinder Auction-ID: A7-47277-3108

Tucker dce1500 + ETF21D stud welling Auction-ID: A1-47219-130

Technical data Manufacturer: TESA Model: MICRO-MS 343 Machine Type: 3D Coordinate Measuring Machine Voltage: 220/240 V Frequency: 50/60 Hz Power: 160 VA Current consumption: 0.7 A Operating pressure: 3.75 bar Measuring range X/Y/Z: 356 / 406 / 305 mm Working range X/Y/Z: 457 / 610 / 381 mm External dimensions: 743 x 730 x 1340 mm Machine weight: 149 kg Max. workpiece weight: 68 kg Resolution: 0.002 mm Repeatability: 0.004 mm Linear accuracy: 0.006 mm Configuration Granite measuring plate 3-axis system X/Y/Z Video monitor available Electronics module available Air bearing system Instruction manual available Various accessories and components included Auction-ID: A7-47277-3046

Technical data Machine Type: Grinding workstation with belt sanding machines and double grinding machine Manufacturer: Metabo, Optimum Maschinen Germany Model belt sander: Metabo BS 175 Model belt sander: Optimum SL-2 Model Double Grinding Machine: Optimum OPTIgrind GU 25S Configuration Workbench with grinding workstation 2 belt sanders available Double grinding machine available AEG angle grinder available Machine vise available Signs of use and dirt present Auction-ID: A7-47277-3113