perforating machines used for sale

WITTMANN SPRUE WP80 X-100 Y-700 Z-90 ROBOT

Key data: 1000 mm

Machine control ASYST MS 400, grinding wheel diameter 250 mm, max. grinding length approx. 1000 mm, with coolant device, fleece filter system and extraction

Separate control cabinet system, fleece filter system

Code: 0388 Brand: SAC Model: FS 530 Surface planer with ‘Tersa’ knives for joinery, furniture, custom-made furniture, wooden joinery, doors, timber framing, sawmills, plastics and various Features: Rigid steel base Ground and balanced steel spindle Low noise level Tilting fence from 0° to 45° Feed indicator Shaft with ‘Tersa’ knives Technical data: Working width 530 mm Total table length 2890 mm Table height 800 mm N° 4 knives Max pass 20 mm Motor 4 Hp Tilting guide – dimensions 120 x 160 mm Overall dimensions mm 2890 x 900 x 96o h Weight kg 800

Roller diameter 200 mm, coolant device and machine light

Roller diameter 150 mm, coolant device and machine light

up to 2000 rpm, T-slot table size 1000 mm x 400 mm, with 3-axis digital display HEIDENHAIN

Grinding wheel diameter 250 mm, max. grinding length approx. 600 mm, with coolant device and fleece filter system

CNC control Traub System TX8 D, with 1 turret with 14 tool positions and 1 turret with 9 tool positions, driven tools, max. turning length approx. 1000 mm, bar passage 80 mm, power 73 KW, with fleece filter system and chip conveyor

CNC control Traub System TX8 D, with 1 turret with 12 tool positions, bar passage 60 mm, with fleece filter system and chip conveyor

CNC control Traub System TX8 F, with 1 turret with 6 tool positions and 1 turret with 6 tool positions, driven tools, bar passage 30 mm, with fleece filter system, coolant device and aut. Bar loading magazine

CNC control Traub System TX8 I, bar passage 42 mm, max. turning length 450 mm, max. speed 8000 rpm, 2 turrets with 10 tool positions each, driven tools, chip conveyor KNOLL 240 S-1/50, filtration system/compact belt filter RESY KBF 452/500

Portal design, measuring range travels: X-axis 850 m x Y-axis 700 mm x Z-axis 600 mm, table size 1500 mm x 1700 mm, probe replacement bench with 8 places, separate control panel and granite measuring plate

Key data: 800 mm, 600 mm, 500 1/min

CNC control Traub System TX8 I, bar passage 42 mm, max. turning length 450 mm, max. speed 8000 rpm, 2 turrets with 10 tool positions each, driven tools, coolant device, chip conveyor KNOLL 240 S-1/50, filtration system/compact belt filter RESY

-Year 1996, One single clamp -Auto cover feeder -Up to 500 books per hour Max book size 32x32 cms. -Min size 7,5x7,5 cms. Binding thickness: 3-40 mms Max cover size 42x62 cms.

CNC control FANUC Series 31i MODEL B, spindle passage 20 mm, 8-axis incl. Y2 axis, main and counter spindle speed max. 8000 rpm, driven tools, machine weight 3,800 kg, with bar loading magazine FMB Minimag 20, with coolant system, filter system, extinguishing system KRAFT & BAUER and chip conveyor

CNC control FANUC Series 31i MODEL B, spindle passage 20 mm, 8-axis incl. Y2 axis, main and counter spindle speed max. 8000 rpm, driven tools, machine weight 3,800 kg, with bar loading magazine FMB Minimag 21, with coolant system, filter system, extinguishing system KRAFT & BAUER and chip conveyor

A complete air-jet loom with integrated Jacquard machine is available for sale. The system is built on a Dornier air-jet base loom fitted with a Staubli Jacquard machine. The complete unit was integrated and delivered by Vaupe. Base loom manufacturer: Dornier Jacquard machine manufacturer: Staubli System integrator: Vaupel - Model: EWM 90-180 E - Year of manufacture: December 2003 - Supply voltage: 400 V - 50 Hz - CE certified: Yes - Made in Germany Find more here - / Contact us at -

Width 82 cm Year of construction 2015 Round Stack Feeder RFH-82 1st station: Knife shaft station SSP 82 2nd station: 6 fold pockets 82 cm Folding rollers Extra-Grip Automatic folding pocket adjustment Automatic folding roller adjustment Dual current device Standing sheet delivery SBP 86 Fully overhauled and workshop tested Machine condition: cleaned Delivery date: immediately

Key data: 1600 kN, 184 g/PS, 40 mm

Arburg 520S-1600-400/170 Two-component injection moulding machine with sorting flap and gas reinforcement (245) Number: 245 Availability: in stock Year of production: 2008 Producer: Arburg Condition of Injection Molding Machine: Used Screw diameter [mm]: 40/30 Injection weight [g]: 184/77 Injection pressure [bar]: 2000/2000 Clamping force [kN]: 1600 Gap spacing [mm]: 520 x 520 Plate size [mm]: 688 x 688 Control Type: Selogica Tongue: English, German Installed power [kW]: 106 Working time [h]: 80.313 Robot connection: 67 Euro Air Valve: 4x Core string: 1x Control of mold heating: 3x Feed hopper: NO

Width 52 cm Year of construction: 2011 Round stack feeder Extended infeed table 1st station: 10 fold pockets Roller diameter 46 mm Double downstream knife shaft 2nd station: 4 fold pockets 52 cm Roller diameter 40 mm Double downstream knife shaft Downstream knife shaft Counting device MC-Control Shed Extension ASP 66-2 ME new suction wheel, new infeed belt, new folding rollers, workshop tested Machine condition: cleaned and checked Delivery date: immediately from stock

Key data: 254 mm, 500 mm, 3600 1/min

Stock number: 3967 CNC LATHE Manufacturer: HYUNDAI, Type: HIT 18S Machines NO.: 34156066, Year of manufacture: 1998 Specifications: Max. circulation diameter 254 mm dia. Turning length 500 mm Main motor power 15 kw Main spindle speed range 3600 rpm Spindle bore 75 mm dia. X axis movement 180 mm Z ash movement 510 mm Tool turret 1 with 8 stations Control Siemens 840C Fabr. Controlled in X-Z axes Accessories: Hydr. Chuck main spindle mm dia Various tool holders. Chip conveyance. Tailstock Whtitout Length: 2650 mm, Height: 1900 mm, Width: 1700 mm, Weight: 4300 kg

Gr. working width: 1020 mm for sheet metal (at 40 kg strength) up to: 2 mm kl. Tail width: 10 x s kl. Inner radius: 1.5 - 2 x s Upper beam opening width: 190 mm Highest working point of the upper beam: 120 mm Lower beam positionability: 60 mm kl. Box profile (WxH): 165 x 125 mm Space requirement (WxD): 1700 x 550 mm Height with raised counterweight: 1650 mm Weight: 560 kg

Banderolierer BandAll BA 64-35/30; serviced and inspected by BandAll after-sales service; Frame 640x350mm; Belt width 30mm; suitable for paper or foil; Compressed air required. Banding machine BandAll BA 64-35/30; tested and checked by the support of BandAll ; frame 640x350mm; band width 30mm; used for paper or foil; compressed air needed.

Continuous blasting machine Raga CH12X18, S/N 284, built in 2000, with blasting chamber, 3 blasting chamber blowers, extraction, carousel system for Christmas tree hangers

Blasting machine Wheelabrator (Czech Republic) HW12-16, year of construction 2021, fir tree plant, interchangeable system

-SPGM Arburg 570 C 2000-800 • YOC 2007 • 55mm auger • 2 core pulls • GID interface • Sealed in January, the SGM is completely dry.

Fully automatic double blasting machine Rösler, automated by industrial robots, blasting chambers each with 2 blowers, each with 2 loading and unloading boxes, built in 2011, incl. wet separator (not visible in the photos)

The machine is in good technical condition, testing is possible by prior arrangement.

The machine is in good technical condition, testing possible after prior agreement. Swing diameter over bed: 630 mm, max. turning diameter: 350 mm, max. turning length: 870 mm, spindle passage 52 mm.

Belt sander from MAFAC ; TYPE K 100 BJ 1979 and a double sander from BOSCH, incl. replacement sanding belts Auction-ID: A1-46862-15

EDM machine Mitsubishi FA20 The rear door seal needs to be replaced A complete service must be done after relocating the machine, adjusting axes According to the Mitsubishi Service Center, costs approx. 2,500 €

able dimensions ( x-y/mm) 6500 x 1800 Stroke ( X/mm) 6210 Stroke ( Y/mm) 3440 Stroke ( Z/mm) 1103 Type of controll heidenhain Number of spindle per minute 35 - 6000 Tool magazine yes Number of inserts in the tool magazine 60

Lathe Hurco TM8i no defects , energized

For particularly high PVC or aluminium profiles Milling cutter diameter 250 mm Milling width: 305 mm Milling depth: 200 mm Pneumatic workpiece clamps Manual feed weight: approx. 300 kg

used spiral mixer Oase SPK 75, good condition, checked and tested, runs perfectly, for 75 kg flour, with 2 clocks, stainless steel kettle, stainless steel spiral, with new lid, motor newly stored, 6.6 kW, machine no. 910707

Milling cutter diameter 250 mm Milling width: 305 mm Milling depth: 160 mm Pneumatic workpiece clamps Manual feed Weight: approx. 200 kg

Mosca RO-MP-K Condition: overhauled, serviced, cleaned, fully functional, ready for use Equipped for 5 mm PP strapping Tape insertion into frames automatically With heat-wedge welding With automatic release With packet height detection (photocells) Documentation: Operating instructions, spare parts catalogue and electrical diagram available

Chiller - Eurochiller GCA9 / Very good technical condition Cooling capacity 13.3 kW Refrigerant R407C The device has: - Compressor - Separate container for medium - Circulating pump - Heat exchangers - Radiator - Fan x 1 The device after maintenance, fully functional 3-month operation warranty in Poland

Single Head Corner Welding Machine

Chiller - MTA TAE EVO 161 Cooling capacity 55 kW Refrigerant R410A The device has: - Compressor x 2 - Separate container for medium - Circulating pump - Heat exchangers - Radiator - Fan x 2 The device after maintenance, fully functional 3-month operation warranty in Poland

Rotox Water Slot Mill

Table dimensions ( x-y/mm) 3000 x 6000 Stroke ( X/mm) 7000 Stroke ( Y/mm) 3200 Stroke ( Z/mm) 1500 Type of controll heidenhain tnc 640 Number of spindle per minute 18000 Chuck connection hsk a 63 Type of head universal automatic bi-rotary Advances 50.000 mm/min Tools connection iso 50 Height ( x/mm) 5380

Key data: 320 mm, 305 mm, 5000 1/min

FANUC i Series Control 12-station turret (not driven) Travel X= 175, Z= 330 mm Bar Passage 51 mm Tailstock Chip tank IEMCA BOSS 545/32 E Bar Feeder

Key data: 3 mm

Max. sheet thickness: 3 mm steel Roller center distance: 125 mm Largest radius: 500 mm Stepless speed adjustment via handwheel Clockwise and counterclockwise rotation Hydraulic infeed via foot switch Weight: approx. 550 kg Other tools on request

EMAG VTC 250 Vertical lathe GENERAL Project No.: 906007 Quantity: 1 pcs. Manufacturer: EMAG Type: VTC 250 Control: Siemens 840 D Year of Make: 2008 Condition: Used machine Layers Machine Approx (Hrs): 2 Layers DESCRIPTION TURNING Max. turning length 630 mm Max. chuck diameter 200 mm Max. speed main spindle 5000 1/min Max. power main spindle at ED 10-40/100% 38/29 kW Max. torque main spindle at ED 10-40/100% 250/200 Nm Full-clamping cylinder on the main spindle Tailstock NC-controlled Revolver left Number of stations/powered by 11/11 Tool holder in the VDI 40 turret Axles in the turret X/Z Max. rapid traverse speed in X/Y/Z 30/-/40 m/min Revolver right Number of stations/powered by 11/11 Tool holder in the VDI 40 turret Axles in the turret X/Z Max. rapid traverse speed in X/Y/Z 30/-/40 m/min OTHER EQUIPMENT Tool measurement using lasers  ...

Manufacturer: KEMPER Drives/motors: HEW Herford + ABM Greiffenberger Main Engine Type: RR 160L/84 S Country of manufacture: West Germany (Germany) — a machine probably from the 80s/90s. Type: spiral bakery kneader with fixed bowl Controls: 2 speeds Automatic cycle Timer emergency STOP

Key data: 2000 mm, 360 , 55

- Top condition - 570 C 2000-800 - YOC 2007 - 55 Snail - 2 Core moves - GID interface - Only sealed in January, the SGM is completely dry.

Max. pipe extension length: 3,000 mm 4-fold bending angle preselection with digital display up to 180° Working area 6 to 38 x 5 or 48.3 x 3.25 mm Includes pre-assembly device with hydraulic cylinder Deburring unit for tubes inside and outside from 6 - 48.3 mm Tools included: Bending mandrels: 35 x 2, 28 x 2.5, 22 x 2, 42.2, 18 x 2, 28 x 2 Bending shoes: 42, 38, 35, 18, 30 ZD, 16-R 35, 22 R 45, 20-2 XD, 25-2 XD, 28 R 55 Weight: approx. 600 kg

Inv. Num. : 6826 Type: TruLaser 3030 Producer: Trumpf Created: 2010, GO 2020 Parameters: Laser ON: 74680 Beam ON: 29226 Laser power: 6 kW Work table length: 3030 mm Work table width: 1500 mm Source: TruFlow 6000 Equipment: Cooling Suction