We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,284 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
new
sheet width: 1275 mm plate thickness: 3 mm strokes per minute until: 35 cutting angle: 2,0 ° table height over floor: 870 mm thickness at Niro-steel: 2 mm total power requirement: 3 kW weight of the machine ca.: 875 kg range L-W-H: 1,7 x 1,68 x 1,1 m Electric 380 Volt: Back stop with manual adjustment: Shadow line lighting: Foot switch: Piece counter: Squaring arm: Support arms: The guillotine shears type SMP is a well-dimensioned machine with all-welded gate guides. The drive takes place with a standard geared brake motor via a chain connection to the main axis. The knives are of the highest quality. The optimal cutting angle ensures together with the rubber-coated sheet metal holder, perfect cuts. Bearings and guides are maintenance-free and lubrication-free. Standard equipment: • Back gauge 635 with mm scale. • Cutting line lighting. • Section counter. • Table extensio ...
used
Plate magnet, lifting magnet, overbelt magnet, police magnet, magnetic filter, magnetic separator Overbelt plate magnet with cleaning mechanism Version in VA 1.4301 tightly welded incl. drawer for cleaning Dimensions: 620 x 420 x 200mm 4 - pieces of M16 eyebolts on the back These two lifting magnets were used by one of our customers as a "police magnet" in the meat processing industry. Both overbelt magnets are in perfect condition. The stated price refers to 1 piece. Currently still 2 pieces immediately available from stock! All information without guarantee, only as long as stocks last! Conveyor belt, conveyor belt system, discharge belts, belt conveyors, magnetic separator, overbelt magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnet, magnetic tape separator Our core competence lies in providing the cu ...
new
Plate magnet, lifting magnet, overbelt magnet, police magnet, magnetic filter, magnetic separator Overbelt plate magnet Version in VA 1.4301 tightly welded Dimensions: 1000 x 500 x 180mm 4 - pieces of M16 eyebolts on the back These two lifting magnets were used by one of our customers as a "police magnet" in the meat processing industry. Both overbelt magnets are in perfect condition. The stated price refers to 1 piece. Currently several available from stock! All information without guarantee, only as long as stocks last! Conveyor belt, conveyor belt system, discharge belts, belt conveyors, magnetic separator, overbelt magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnet, magnetic tape separator Our core competence lies in providing the customer with exactly what he really needs. Together with our customer ...
used
pressure: 30 t throat: 180 mm stroke: 10 - 75 mm no. of strokes: 125 Hub/min dayligth: 225 mm distance table - lower edge of ram: 300 mm ram adjustment: 50 mm table-size: 360 x 560 mm ram head dimension: 260 x 340 mm work height max.: 670 mm table hole: 140 mm ram hole: 35 mm total power requirement: 2,2 kW weight of the machine ca.: 2,8 t dimensions of the machine ca.: 1,1 x 1,3 x 2,0 m This eccentric press machine with 80 ton capacity is suitable to carry out tasks involving deep-drawing, cutting, punching and stamping. Our Profi Press mechanical presses can be used for various applications in many different industries: the automotive, railway and aerospace industries (for example) and many more related industries that use metal forming. Made of S355JR steel and equipped with a 4 guided ram. The rod is made out of high-strength forged steel and high-performance alloy bushings. This hig ...
used
pressure: 125 t throat: 300 mm stroke: 10 - 135 mm no. of strokes: 50 Hub/min dayligth: 315 mm distance table - lower edge of ram: 450 mm ram adjustment: 60 mm table-size: 600 x 900 mm ram head dimension: 315 x 550 mm work height max.: 800 mm table hole: 250 mm ram hole: 50 mm total power requirement: 11,0 kW weight of the machine ca.: 5,5 t dimensions of the machine ca.: 1,65 x 1,68 x 2,87 m This eccentric press machine with 80 ton capacity is suitable to carry out tasks involving deep-drawing, cutting, punching and stamping. Our Profi Press mechanical presses can be used for various applications in many different industries: the automotive, railway and aerospace industries (for example) and many more related industries that use metal forming. Made of S355JR steel and equipped with a 4 guided ram. The rod is made out of high-strength forged steel and high-performance alloy bushings. Thi ...
new
Dynajet 350mg cold water cleaner with petrol drive Small, efficient and independent: dynaJET's compact mg-class with powerful Petrol engine. Just like the other DYNAJET trolleys of the mg class, the DYNAJET 350mg with up to 350 bar working pressure, especially due to its low weight, the small dimensions and the easy loading and transport possibilities. Construction • Robust, powder-coated steel frame for optimum machine protection and long service life • 1-axle chassis with pneumatic tires for easy manoeuvring on site • Flexibility and support due to perfect center of gravity • High durability due to screw connections made of stainless material • Crane eyelet for easy transport • Operating hours counter for optimal post-calculation • 12V socket to secure the power supply of the Dynabox hot water module (optional) Drive • Vibration-proof starter battery ...
new
DYNAJET 500me HELI - 400V/50Hz pressure washer INTRODUCTORY OFFER: If you want to be sure that this device is right for you, then we have a special offer for you: Crediting of rents for up to 6 months at 100% of the purchase price! Welcome to the innovative and compact me-Class! The DYNAJET 500me with up to 500 bar Working pressure convinces in addition to its performance above all by its compact Dimensions and high mobility. This makes the versatile high-pressure cleaner one of the All-rounders in our offer. Construction - Robust, powder-coated steel frame for optimum machine protection and long service life - 1-axle chassis with pneumatic tyres for easy manoeuvring on site - Flexibility and support due to perfect center of gravity - High durability due to screw connections made of stainless material - Splash water resistant (IP54) control cabinet for versatile and sm ...
used
pressure: 2000 /1000 t distance between columns: 2650 mm stroke: 500 mm column travel -side: 500 x 1000 mm diameter of piston: 710 mm number of pistons: 2 distance between table / ram: 1000 mm operating pressure: 130 / 230 bar dayligth: 800 mm table length: 2500 mm table width: 1600 mm table height: 250 mm draw back pressure: 500 kN number of T-slots: 8 turning speeds: 1500 U/min rapid speed: 120 - 140 mm/min closing speed: max. 120 - 140 mm/sec. hydraulical ram locking: return of plunger by small single cylinders: 100 - 110 mm/sec cutting sound absorber: 300 t die cushion capacity: 200 t die cushion stroke: 250 mm speed of die cushion: 100 mm/sec voltage: 380 V frequency: 50 Hz quantity of oil: 2000 l total power requirement: 93 kW weight of the machine ca.: 90 t dimensions of the machine ca.: 5000 x 2500 x 7200 mm transport measurements: ca. 6500 x 3750 x 2190 mm 1991 assembly of a di ...
used
workpiece diameter: 8-125 mm grinding depth: 130 mm clamping length: 50-1100 mm max. workpiece diameter: 0 mm min. workpiece diameter: 0 mm workpiece length: mm total power requirement: 1 kW weight of the machine ca.: 500 kg dimensions of the machine ca.: m T E C H N I C A (Switzerland) Centre Hole Grinding Machine Model ZSM 1000 Year approx. 1975 Serial No. J 1400 _______________________________________________________ Distance between centres 50 – 1,100 mm Height of centres 145 mm Workpiece Ø 8 – 125 mm Max. centre hole taper Ø 2 – 50 mm Max. centre hole taper angle 60 ° Clamping range of vice 4 – 150 mm Stroke of grinding head 130 mm Stroke of grinding tool on workpiece 0.75 – 5 mm Grinding tool Ø ...
new
Dynajet 500mg cold water cleaner with petrol drive Small, efficient and independent: dynaJET's compact mg-class with powerful Petrol engine. Just like the other DYNAJET trolleys of the mg class, the DYNAJET 500mg with up to 500 bar working pressure, especially due to its low weight, the small dimensions and the easy loading and transport possibilities. Construction • Robust, powder-coated steel frame for optimum machine protection and long service life • 1-axle chassis with pneumatic tires for easy manoeuvring on site • Flexibility and support due to perfect center of gravity • High durability due to screw connections made of stainless material • Crane eyelet for easy transport • Operating hours counter for optimal post-calculation • 12V socket to secure the power supply of the Dynabox hot water module (optional) Drive • Vibration-proof starter battery ...
new
Perfect for your labeling needs FleXpress incorporates our combined many years of expertise in laser technology: We have further developed proven basic elements and systematically tailored them to the requirements and guidelines of the European market. The result is convincing: With FleXpress you get a reliable, easy-to-use product with a very good price-performance ratio. It is adapted to your individual customer requirements and can be used in numerous areas of engraving, tempering marking, depth marking and plastic marking. User-oriented through and through Best usability and a high level of service orientation were the focus of FleXpress' development: The machine housing can be put into operation anywhere in your production to save space. Of course, the FleXpress meets the requirements for safe working in laser safety class 1. In addition, you can use the clear laser software ...
new
Compact 50l compressor with two very powerful, silent direct drive motors. Designed for workshops, dental offices and other places where regular compressors are too loud. Oil-free design and anti-rust inner coating makes it perfect for medical institutions. Advantages of Aflatek SilentPro50-2 2.2kW: -Two powerful 1100W electrical motors. -Anti-rust coating. -Air filter on each pump. -Low noise and vibrations level. -Oil-free. -Easily transportable on two rubber wheels. Technical data: Power supply , V: 230 Motor power, W: 2x1100(2200) Motor speed, Rpm: 1440 Air supply, L/min: 420 Maximum pressure. Bar: 8 Maximum pressure, Psi: 116 Noise Level, dB: 80 Air tank, L: 50 Dimensions(length x width x height), mm: 700x340x600 Weight, kg: 38 Shipping details: Packaging: Carton box Dimensions, (length x width x height), mm: 715x365x650 Weight, kg: 43 Tracking: ...
new
turning diameter over bed: 890 mm turning diameter over slide rest: 490 mm turning length: 1500 bis 6000 mm spindle bore: 155 mm turning dia. in gap: 1050 mm spindle turning speed - stepless: 10 - 1200 U/min metric threading: 0,5 - 480 thread - module: 0,125 - 120 mm thread - inch: inch. Whitworth-thread: 0,0625 - 60 TPI bed width: 700 mm spindle cone: Gr. 15 number of feeds: 80 mm/U longitudinal feeds:: 0,032 - 38,9 mm/U face feeds: 0,016 - 19,45 mm thread: 80 Stufen face slide travel: 525 mm upper slide-adjustment: 270 mm diameter of quill: 125 mm : MT6 quill stroke: 250 mm total power requirement: 250 kW weight of the machine ca.: 6550 kg Huvema’s range of European production lathes. Fitted out with variable speed and fully protected. These machines are perfect for all industrial applications. Users are very enthousiastic about these machines! Also available in: Also available in: 1 ...
new
turning diameter over bed: 500 mm turning diameter over slide rest: 300 mm turning length: 1000 bis 4000 mm spindle bore: 72 mm turning dia. in gap: 700 mm spindle turning speed - stepless: 20 - 2000 U/min metric threading: 0,5 - 120 thread - module: 0,125 - 30 mm thread - inch: inch. Whitworth-thread: 0,25 - 60 TPI bed width: 400 mm spindle cone: Gr. 8 number of feeds: 120 mm/U longitudinal feeds:: 0,04 - 12 mm/U face feeds: 0,02 - 6 mm thread: 64 Stufen face slide travel: 315 mm upper slide-adjustment: 130 kW diameter of quill: 75 mm : MTS quill stroke: 230 mm total power requirement: 11 kW weight of the machine ca.: 2650 kg Huvema’s range of European production lathes. Fitted out with variable speed and fully protected. These machines are perfect for all industrial applications. Users are very enthousiastic about these machines! Also available in: 1,5m, 2m, 3m and 4m. variable speed ...
new
turning diameter over bed: 630 mm turning diameter over slide rest: 430 mm turning length: 1000 bis 5000 mm spindle bore: 103 mm turning dia. in gap: 830 mm spindle turning speed - stepless: 20 - 2000 U/min metric threading: 0,5 - 120 thread - module: 0,125 - 30 mm thread - inch: inch. Whitworth-thread: 0,25 -60 TPI bed width: 500 mm spindle cone: Gr. 11 number of feeds: 64 mm/U longitudinal feeds:: 0,04 -12 mm/U face feeds: 0,02 - 6 mm thread: 64 Stufen face slide travel: 315 mm upper slide-adjustment: 130 mm diameter of quill: 75 mm : MT5 quill stroke: MT5 mm total power requirement: 11 kW weight of the machine ca.: 3010 kg Huvema’s range of European production lathes. Fitted out with variable speed and fully protected. These machines are perfect for all industrial applications. Users are very enthousiastic about these machines! Also available in: Also available in: 1,5m, 2 m - 6 m. ...
new
High quality oil-free compressor, great for heating systems, workshops, service stations, spray painting and many other applications. Oil-free design and anti-rust inner coating makes it perfect for medical institutions like dental office. Advantages of Aflatek SilentPro100-3 230V: -Three powerful direct drive electrical motors. -Anti-rust coating. -Air filter on each pump. -Low noise and vibrations level. -Oil-free. -Easily transportable on two rubber wheels. Technical data: Power supply , V: 1Ph 230V Motor power, W: 3x1100(3300) Motor speed, Rpm: 1440 Air supply, L/min: 630 Maximum pressure. Bar: 8 Maximum pressure, Psi: 116 Noise Level, dB: 82 Air tank, L: 100 Dimensions(length x width x height), mm: 1000x400x670 Weight, kg: 58 Shipping details: Packaging: Carton box on a pallet Dimensions, (length x width x height), mm: 1010x415x710 Weight, kg: 68 ...
new
turning diameter over bed: 580 mm turning diameter over slide rest: 380 mm turning length: 1000 bis 5000 mm spindle bore: 72 mm turning dia. in gap: 780 mm spindle turning speed - stepless: 10 - 1200 U/min metric threading: 0,5 - 120 thread - module: 0,125 - 30 mm thread - inch: inch. Whitworth-thread: 0,25 -60 TPI bed width: 400 mm spindle cone: Gr. 8 number of feeds: 80 mm/U longitudinal feeds:: 0,04 -12 mm/U face feeds: 0,02 - 6 mm thread: 64 Stufen face slide travel: 315 mm upper slide-adjustment: 130 mm diameter of quill: 75 mm : MT5 quill stroke: 250 mm total power requirement: 11 kW weight of the machine ca.: 2710 kg Huvema’s range of European production lathes. Fitted out with variable speed and fully protected. These machines are perfect for all industrial applications. Users are very enthousiastic about these machines! Also available in: Also available in: 1,5m, 2 m - 6 m. v ...
new
DYNAJET 500me HELI - 400V/50Hz INTRODUCTORY OFFER: If you want to be sure that this device is right for you, then we have a special offer for you: Crediting of rents for up to 6 months at 100% of the purchase price! Welcome to the innovative and compact me-Class! The DYNAJET 500me with up to 500 bar Working pressure convinces in addition to its performance above all by its compact Dimensions and high mobility. This makes the versatile high-pressure cleaner one of the All-rounders in our offer. Construction - Robust, powder-coated steel frame for optimum machine protection and long service life - 1-axle chassis with pneumatic tyres for easy manoeuvring on site - Flexibility and support due to perfect center of gravity - High durability due to screw connections made of stainless material - Splash water resistant (IP54) control cabinet for versatile and smooth use - Oper ...
new
Dynajet 500mg cold water cleaner with petrol drive Small, efficient and independent: dynaJET's compact mg-class with powerful Petrol engine. Just like the other DYNAJET trolleys of the mg class, the DYNAJET 500mg with up to 500 bar working pressure, especially due to its low weight, the small dimensions and the easy loading and transport possibilities. Construction • Robust, powder-coated steel frame for optimum machine protection and long service life • 1-axle chassis with pneumatic tires for easy manoeuvring on site • Flexibility and support due to perfect center of gravity • High durability due to screw connections made of stainless material • Crane eyelet for easy transport • Operating hours counter for optimal post-calculation • 12V socket to secure the power supply of the Dynabox hot water module (optional) Drive • Vibration-proof starter battery ...
new
YNAJET 500me - 400V/50Hz Pressure Washer INTRODUCTORY OFFER: If you want to be sure that this device is right for you, then we have a special offer for you: Crediting of rents for up to 6 months at 100% of the purchase price! Welcome to the innovative and compact me-Class! The DYNAJET 500me with up to 500 bar Working pressure convinces in addition to its performance above all by its compact Dimensions and high mobility. This makes the versatile high-pressure cleaner one of the All-rounders in our offer. Construction - Robust, powder-coated steel frame for optimum machine protection and long service life - 1-axle chassis with pneumatic tyres for easy manoeuvring on site - Flexibility and support due to perfect center of gravity - High durability due to screw connections made of stainless material - Splash water resistant (IP54) control cabinet for versatile and smooth u ...
new
turning diameter over bed: 500 mm turning diameter over slide rest: 300 mm turning length: 1000 bis 5000 mm spindle bore: 103 mm turning dia. in gap: 700 mm number of spindle speeds: 11,5 - 1400 metric threading: 0,5 - 120 thread - module: 0,125 - 30 mm Whitworth-thread: 0,25 - 60 TPI bed width: 400 mm spindle cone: Gr. 11 number of feeds: 120 mm/U longitudinal feeds:: 0,04 - 12 mm/U face feeds: 0,02 - 6 mm thread: 64 Stufen face slide travel: 315 mm upper slide-adjustment: 130 kW diameter of quill: 130 mm : MTS quill stroke: 250 mm total power requirement: 11 kW weight of the machine ca.: 2800 kg Huvema’s range of European production lathes. Fitted out with variable speed and fully protected. These machines are perfect for all industrial applications. Users are very enthousiastic about these machines! Also available in: 1,5m, 2m, 3m and 4m. variable speed, 3 steps rapid traverse throu ...
new
ynajet 350mg cold water cleaner with petrol drive Small, efficient and independent: dynaJET's compact mg-class with powerful Petrol engine. Just like the other DYNAJET trolleys of the mg class, the DYNAJET 350mg with up to 350 bar working pressure, especially due to its low weight, the small dimensions and the easy loading and transport possibilities. Construction • Robust, powder-coated steel frame for optimum machine protection and long service life • 1-axle chassis with pneumatic tires for easy manoeuvring on site • Flexibility and support due to perfect center of gravity • High durability due to screw connections made of stainless material • Crane eyelet for easy transport • Operating hours counter for optimal post-calculation • 12V socket to secure the power supply of the Dynabox hot water module (optional) Drive • Vibration-proof starter battery ...
new
Cold water high-pressure cleaner Welcome to the innovative and compact me-Class! The DYNAJET 350me with up to 350 bar Working pressure convinces in addition to its performance above all by its compact Dimensions and high mobility. This makes the versatile high-pressure cleaner one of the All-rounders in our offer. Construction Robust, powder-coated steel frame for optimum machine protection and long service life 1-axle chassis with pneumatic tyres for easy manoeuvring on site Flexibility and support due to perfect center of gravity High durability due to screw connections made of stainless material Splash-resistant (IP54) control cabinet for versatile and smooth use Operating hours counter for optimal post-calculation Drive Manual star/triangle start to protect the power grid Compact and robust industrial electric motor for long service life with maximum running times ...
new
Cold water high-pressure cleaner Welcome to the innovative and compact me-Class! The DYNAJET 280me with up to 280 bar Working pressure convinces in addition to its performance above all by its compact Dimensions and high mobility. This makes the versatile high-pressure cleaner one of the All-rounders in our offer. Construction Robust, powder-coated steel frame for optimum machine protection and long service life 1-axle chassis with pneumatic tyres for easy manoeuvring on site Flexibility and support due to perfect center of gravity High durability due to screw connections made of stainless material Splash-resistant (IP54) control cabinet for versatile and smooth use Operating hours counter for optimal post-calculation Drive Manual star/triangle start to protect the power grid Compact and robust industrial electric motor for long service life with maximum running times ...
new
tube diameter: 16 - 76 mm grinding band dimension: 100 x 2000 mm Band Speed: 30 m/min. voltage: 400 V angle adjustable from - to: 30 - 90 Grad power capacity - grinding motor: 2,2 kW range L-W-H: 1250 x 700 x 12500 mm weight: 170 kg Standard Accessories For tubes and profiles made of metal Simplified opera on by twistable grinding fixture Adequate for tube diameter from 1/ 2” to 2 1/ 2” Quick adjustment for grinding angle 30° – 90° Powerful motor 2,2 kW / 380 V Abrasive roll easy and fast changeable Because of tape speeds of 30m/s perfect fi ng for steel and material Vibration reduced stand The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 60 t throat: 235 mm stroke: 10 - 100 mm no. of strokes: 60 Hub/min dayligth: 270 mm distance table - lower edge of ram: 370 mm ram adjustment: 50 mm table-size: 470 x 700 mm ram head dimension: 310 x 410 mm work height max.: 670 mm table hole: 190 mm ram hole: 40 mm total power requirement: 4,0 kW weight of the machine ca.: 3,5 t dimensions of the machine ca.: 1,23 x 1,46 x 2,35 m This eccentric press machine with 80 ton capacity is suitable to carry out tasks involving deep-drawing, cutting, punching and stamping. Our Profi Press mechanical presses can be used for various applications in many different industries: the automotive, railway and aerospace industries (for example) and many more related industries that use metal forming. Made of S355JR steel and equipped with a 4 guided ram. The rod is made out of high-strength forged steel and high-performance alloy bushings. This ...
new
Cold water high-pressure cleaner, export version with 60Hz Welcome to the innovative and compact me-Class! The DYNAJET 150me with up to 150 bar working pressure convinces not only with its performance but above all with its compact dimensions and high mobility. This makes the versatile high-pressure cleaner one of the all-rounders in our range. Construction Robust, powder-coated steel frame for optimum machine protection and long service life 1-axle chassis with pneumatic tyres for easy manoeuvring on site Flexibility and support due to perfect center of gravity High durability due to screw connections made of stainless material Splash-resistant (IP54) control cabinet for versatile and smooth use Operating hours counter for optimal post-calculation Drive Manual star/triangle start to protect the power grid Compact and robust industrial electric motor for long service lif ...
used
GLASS WOK 400 LIT ID.NO. 2141 Glass Wok 400 liter frying pan with heating oil for more even heat. Year of fashion 2013 perfect for frying or roasting nuts etc. Dimensions 260 x 150 cm H 185 cm. Measured boiler 125 x 45 cm H 155 cm.
used
1 Clamp Perfect Binder, Delivery Belt Year: ca. 1993
new
Baler, press for cardboard cardboard, foil paper V50 | 706 SPECIFICATIONS Bale size: 1000 mm H (variable) × 1200 mm B × 800 mm D Bale weight: 350–550 kg Pressing time: 45 seconds Pressing force: up to 50 tons Dimensions: 3055 mm H × 1985 mm W × 1130 mm D Filling opening: 1200 mm W × 640 mm H Weight: 1870 kg Power supply: Three-phase, 380/400 volt 7.5 kW motor Noise: 74 decibels DIN EN 16500 IP 54 protection class PLC light indicator "Bale full" and "Automatic pressing process" CE Certification Made in EU OPTIONS Adaptable for vehicle bodies Suitable for use at sea Automatically opening guillotine door E-Power (three-phase motor with 380/440 volts and 4 kW) PET Press Filling at the back of the machine Electronic weighing system Annual maintenance contract Galvanized Description The V50 is perfect for pressing large volumes of waste and then reselling or ...
used
Machine Details Stock-No. 1105-03435 Type of machine Bed Type Milling Machine - Universal Make LAGUN FBF 1200 Type HEIDENHAIN TNC 335 Year of manufacture 1991 Type of control CNC Storage location HAGUENAU Country of origin SPAIN Delivery time IMMEDIATELY Freight basis EX STOCK Price Technical details x-travel 1100 mm y-travel 600 mm z-travel 600 mm surface area 1200X 550 mm turning speed range: 50-3000 TR/MIN power capacity 20 kW control TNC 355 HEIDENHAIN Additional information CNC CONTROL HEIDENHAIN TNC 355 IN PERFECT WORKING CONDITION
used
A HOSOKAWA ALPINE Originals machine Refurbished by the original manufacturer Use of original components only Original manufacturer warranty Guaranteed manufacturer spare parts supply Short lead time Before delivery, the machine is overhauled, all wear parts are revised and exchanged if needed and customized to your specific needs Possibility to provide all additionally required peripherals or adapt to existing production plant We are also interested in buying back disused HOSOKAWA ALPINE machinery Used Hosokawa Alpine Mikro Classifier CC22, from our former generation previous to our current technological evolution. This air classifier can operate off-line as a stand alone system or in-line as the perfect companion for a Hosokawa Alpine ACM 10 or ACM 15 impact classifier mill, to ensure no undesired fine dust particles are present in the final micronized product, usually in the ...
used
For sale: Diosna spiral kneader W 240 - 3 boilers - Program memory - Speed control with an inverter - with the possibility to change the speed of the spiral/tool - boiler with tilting possibility - perfect condition Contact: damianborucki@anbox.pl or +48 692 345 660 (also WhatsApp)
used
Item condition: maintained Availability: immediately Printheads clean and rinsed: yes The A300 offers consistently high quality – across a variety of formats – even in the harshest environments. The robust and durable housing made of 316 stainless steel offers excellent protection against dust and water. Thanks to the unique self-cleaning ink system and our patented SureStart operation with a single press, the total cost of ownership is low with minimal operator intervention. It's the perfect choice when you need a rugged, flexible printer that offers maximum productivity.
used
Used electric punching and binding system for plastic binding. For the fast and practical creation of brochures and documents in small to large runs. Binds up to 480 sheets Diameter adjustment guarantees easy opening and closing of the binding element, for perfect presentations Rotary knob to adjust the edge spacing Specially hardened punches for sustainable use Offset punching punches for a better punching result Highest format flexibility thanks to QSA technology, e.B. between DIN A4 and A5 Adjustable side stop for ideal punch adjustment Easy-to-empty waste drawer Built-in dimension scale for document or binding element size Robust construction and compact design
used
For sale: Konig spiral kneader GYD 240 system as in Diosna - 3 boilers - after general overhaul - perfect condition Contact: damianborucki@anbox.pl or +48 692 345 660 (also WhatsApp)
used
pressure: 63 t throat: 235 mm stroke: 6 - 100 mm no. of strokes: 60 Hub/min dayligth: 270 mm distance table - lower edge of ram: 370 mm ram adjustment: 80 mm table-size: 650 x 600 mm ram head dimension: 180 x 230 mm work height max.: 700 mm table hole: 110 mm total power requirement: 4,0 kW weight of the machine ca.: 3,5 t dimensions of the machine ca.: m This eccentric press machine with 80 ton capacity is suitable to carry out tasks involving deep-drawing, cutting, punching and stamping. Our Profi Press mechanical presses can be used for various applications in many different industries: the automotive, railway and aerospace industries (for example) and many more related industries that use metal forming. Made of S355JR steel and equipped with a 4 guided ram. The rod is made out of high-strength forged steel and high-performance alloy bushings. This high performance Profi Press feature ...
used
GEA type 200023512 Intercooler Ladeluftkühler MTU Einwandfreier Zustand perfect condition from an MTU4000 engine that has been running for 25,000 hours von einem MTU4000-Motor, der seit 25000h in Betrieb ist
used
Edge chamfering machine make PULLMAX type X 93Machine -No: 70270-06, built in 1982for optimum beveling for perfect weld preparationexact, deformation-free, metallically pure and chemically unaffectedTechnical specifications:Feed rate 1.5 / 3.1 m / minBevel angle 25 - 55 °smallest straight edge 3 mmMax. Sheet thickness 50 mmExternal dimensions 1360 x 1110 x 1510 mmWeight approx 1300 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Electro-Hydraulic Bending Machine Fabr. SCHWARZE-WIRTZ type Perfect WE 40 Dmachine -No: 85500 year 1985Max. Bending capacity: 25 x 2 mmPipe diameter min.: 10 mmMax. Bending radius up to center of pipe: 100 mmminute Bending radius up to center of pipe: 25 mmBending angle max.: 180°Bending direction: LeftMax. Bending speed forfeed stepless: 19 rpm.Return constant: 19 rpm.Drive power: 7.5 kWWeight approx.: 700 kgExternal dimensions L x W x H: 2200 x 1100 x 1100 mmWith- Hydraulic slide rail feed- Creeper control- Footswitch- without toolsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
new
SUMAB Smallest Automatic concrete plant SUMAB MINI The SUMAB MINI is a perfect match for you whether you produce concrete for your own project or need material to produce concrete elements. Technical details: • Easy to put it inside the building and build your concrete element factory. • Designed on a container frame. • 2 aggregate storages, • pan-mixer 500/300 liters. • Water tank 200 liters. • Automatic control of a plant: computer (20 concrete recipes). Concrete plants made by SUMAB are the definition of quality, durability and reliability. Our batching plant are made using Scandinavian technology and components from leading European manufacturers! We offer Scandinavian quality at the best price! If you need more information, you can visit our website, or send a request and we’ll help find the best solution for you!
used
KOMORI LS 1029 P (10/0-5/5) from 2008 A 10 Colors Offset Printing press of size 53 x 75 cm Option ; PQC with PDCS II Color Measurement, KomoriMatic with Technotrans Recirculation & Refrigeration Ink Temperature Control (Technotrans BETA C), All Auto. Washers, APC, AMR Auto. Size setting and Double Sheet Control, KHS KMS II Chromed Ceramic Cylinders and Perfect Jackets impression Cylinders PERFECTOR 10/0 - 5/5, CIP Connection, Weko powder spray Condition ; Nice Condition, 98 Mio. Impressions, Immediately available
used
Many thanks for your interest in our machinery, please find below our offer: Manufacturer : Chocotech Wernigerode (Sollich) Type : Sucrotech cooking plant with Sucrostar & Sucrotwist cookern Year of made : 2012 like new condition Electrical : 400V 50 Hz, 3Ph dimensions : 10000 x 5000 x 2700 (lxwxh in mm) Output/performance : 200-300kg/h (manufacturer information) in depend of product different: - Chocotech cooking system type Sucrotech, consisting of, - Sucrotwist 3m² cooker all sugar and sugar-free masses - Sucrostar cooker with cooler - Preparation tank 150l - pre-dissolving tank 200l - aroma dosing - acid dosing - Alcohol dosage with 100l alcohol tank - Aftercooler with temperature control unit - top condition – Like NEW (Only testrun after installation) - dismantled The Sucro Twist Cooking System can be used for pre- and final cooking of sugar ...
used
Petroncini coffee grinder 1500kg per hour Was revised by actual owner Cooling system added by owner In perfect working condition Was exclusively used for Turkish Ibrik coffee (very fine) 2 sets of rolls very recently sharpened Inspection possible in operation Ready to work for many years ! Check my profile to see other roasting equipment
used
Machine on Sale: NOVA JET CLEANING & IRON SCREENS KIT On sale Nova Jet Cleaning & Iron screen kit installed in 2018. Machine is in perfect running conditions and well maintened as worked very few hours (less than 1000h). The complete lot include everything necessary to run the machine along with all perifericals and large set of spare parts for the machine. Machine is fully operational and can be visited for a test and inspection. Lot composition: 1.- Nova Jet Cleaning System for stripping rotary nickel screens. Specifications: • • Max screen lenght 3200mm Rapports available 640mm, 819mm, 914mm y 1014mm (inner brushes for all sizes, most of them new as never been used) Included with Stripping machine • Oil cooler MCO-7OB de 7kw. • Inverter ABB de 55kw • Stripping control unit. 2.- Nova Ironing machine to iron screens after stripping. Specifications: • Ma ...
used
COLOR SORTER BY IST ITALY, new in 2017, little use Was used for cereals, legumes, seeds sorting line Replaced by a more sophistcated new one but was in perfect working condition when replaced. Stored in a dry conditions currently. 3+ chutes, 3 for sorting, one for recycling, 256 ejectors or 64 ejectors by chute, 4098 pixels, led lights OUTPUT : till 12 tonnes according to the manufacturer original technical liftlet. Information on request, shipping to any destination Can be seen near Amiens 80, northern France See also website : milin cereal equipment Brittany, France
new
Perfect for your labeling needs The UV marking laser enables high-contrast marking. The absorption rate is incredibly high for a variety of materials, which allows labeling and processing to be performed with minimal heat stress. The product surface is changed photomechanically so that sensitive surfaces (such as cables.B, hoses, electronic housings, glass and much more.m.) can be easily marked with the UV laser.
used
The FAM TS-1D is a transversal cutter for fluid and uniform cutting of vegetables such as carrots, leeks, salads ... • Product diameter: 90 mm for hard products and 110 mm for flexible products • The slightly angled knives of the cutting wheel guarantee a perfect cutting result. • Cut shapes: flat cut, crinkle cut, julienne slices, halved slices • Optional frequency inverter adjusts the speed of the belts and the cutting wheel. · The cutting wheel can be replaced by a "spear" type head to cut longitudinal segments. · Cutting sizes: various cut sizes possible from 1,6 mm up to 40 mm • Articulated dump hopper and easy-to-disassemble covers give access to the product and transmission areas. · Infeed belt ± 1.400 mm
new
With very powerful 1100W motor SilentPro10-1 is excellent option for anyone who needs compact and portable compressor that provides considerable air flow rate. Oil-free design and anti-rust inner coating makes it perfect for medical institutions like dental office. Advantages of Aflatek SilentPro10-1: -Compact design. -Much more powerful than other compressors of the same size. -Minimal maintenance needed. -Anti-rust coating. -Air filter. -Low noise and vibrations level. -Oil-free. Technical data: Power supply , V: 230 Motor power, W: 1x1100 Motor speed, Rpm: 1440 Air supply, L/min: 210 Maximum pressure. Bar: 8 Maximum pressure, Psi: 116 Noise Level, dB: 77 Air tank, L: 10 Dimensions(length x width x height), mm: 500x190x490 Weight, kg: 16 Shipping details: Packaging: Carton box Dimensions, (length x width x height), mm: 530x210x500 Weight, kg: 17 T ...
new
Less powerful version of SilentPro100-3. Instead of 1100W motors, Silent100-3 has three 550W motors which still makes it very powerful for an affordable price. Oil-free design and anti-rust inner coating makes it perfect for medical institutions. Advantages of Aflatek Silent100-3: Three 550W direct drive electrical motors. Anti-rust coating. Air filter on each pump. Low noise and vibrations level. Oil-free. Easily portable on two rubber wheels. Technical data: Power supply , V: 230 Motor power, W: 3x550(1650) Motor speed, Rpm: 1440 Air supply, L/min: 210 Maximum pressure. Bar: 8 Maximum pressure, Psi: 116 Noise Level, dB: 56 Air tank, L: 100 Dimensions(length x width x height), mm: 1000x400x670 Weight, kg: 58 Shipping details: Packaging: Carton box on a pallet Dimensions, (length x width x height), mm: 1010x415x710 Weight, kg: 66 Tracking: Available ...