136,774 used machines on RESALE, but how to find them? Machine Search
Used Kolmag PGP 60 hot press for wooden panels. Hydraulic press with a sturdy metal frame and vertical hydraulic cylinders. The pressing platens are made of solid bakelite in a large size (252 x 132 cm) and the pressing force reaches 70 tonnes, giving even pressure over the whole surface of the panel. It has a built-in water pump and a control panel with two analogue gauges, indicator lamps and operating controls. The machine has not been operated for years and needs inspection before use. Technical data: - Manufacturer: Kolmag - Model: PGP 60 - Type: Hot hydraulic press for wooden panels - Platens: solid bakelite, 252 x 132 cm - Pressing force: 70 tonnes - Water pump: built-in - Dimensions: 300 x 150 x 190 (height) cm - Weight: 3200 kg Note: technical data originate from a listing of the same model and may differ on this specific machine. Used, sold as seen. Has not been operated fo ...
ALTO NILFISK garden cleaning brush 106411325, an accessory for pressure washers. Compatible with the following Nilfisk models: P 160.2-15 X-tra, P 150.2-10, P 150.2-10 X-tra, E 140.2-9 S X-tra, E 130.2-9 X-tra, C 130.1-6 X-tra, C 120.3-6 and C 110.3-5 X-tra. New old stock item. Further technical specifications are not confirmed for this specific unit - please contact us for details. Auction-ID: A7-50988-41
NILFISK ALTO vehicle spray lance accessory (ref. 6410763) for pressure washers. Compatible with: C 105, C 110, C 120, C 125, C 130, C-PG 130, C-PG 140, D 130, D 140, D-PG 130, D-PG 140, E 130, E 140, E 145, E 150, P 150, P 160. New old stock item. Further technical specifications are not confirmed for this specific unit - please contact us for details. Auction-ID: A7-50988-51
Hydraulic single-column press with 25 t pressing force and 4 kW drive power. Machines are generally offered without documentation. If documents are available, they will be attached to the respective machine.
: neu : ca. 3-6 Wochen ab Auftrag : Türkei : 62500 € : 1181.25 € : 63 to : 750 mm : 500 mm : 170 mm : 4 - 102 mm : 54 1/min : 490x325 mm : 90 mm : 270 mm : 440 mm : 7.5 kW : 1800 mm : 1150 mm : 2750 mm : 4100 kg 8-fold ram guide front protection by light guard manual stroke adjustment ram adjustment witch ratchet drive over gear combined clutch brake unit with pneumatic control fix table single and continuous stroke foot pedal and 2 hand control mech. overload safety device automatic central lubrication user manual in GERMAN and ENGLISH according to CE rules The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Working width: 3000 mm Working height: 2000 mm Number of cylinders: 5 St. S&S Frame Press, Type RP 3000 ------------------------------------- Working width: 3000 mm Working height: 2000 mm Item 1 00000431 S&S FRAME PRESS Type RP 3000 Item 2 00000371 Centre pressure beam with pressure cylinder double-acting, weight compensation, pressure hose and shut-off valve up to 2000 mm high Item 3 00000039 Shut-off valve on the 1st vertical cylinder Item 4 00000039 Shut-off valve on the 3rd vertical cylinder Item 5 00000039 Shut-off valve on the upper horizontal cylinder Item 6 00000039 Shut-off valve on the lower horizontal cylinder Manufacturer’s technical description: Sturdy welded frame construction made from thick-walled special hollow sections, sliding carriages and pressure beams with 50 mm hole spacing. Continuous abutment on the left-hand side for width compression, lower abutment on two ...
: neu : ca. 10 Wochen ab Auftrags : Türkei : 70300 € : 1328.67 € : 110 to : 900 mm : 540 mm : 180 mm : 14 - 114 mm : 60 1/min : 490x325 mm : 90 mm : 280 mm : 7.5 kW : 1870 mm : 1320 mm : 2800 mm : 5600 kg 8-fold ram guide front protection by light guard manual ram adjustment mech. overload safety device automatic lubrication user manual in GERMAN and ENGLISH according to CE rules The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 3-6 Wochen ab Auftrag : Türkei : 79900 € : 1510.11 € : 130 to : 1000 mm : 640 mm : 210 mm : 5 - 110 mm : 60 1/min : 630x400 mm : 90 mm : 330 mm : 11 kW : 2200 mm : 1372 mm : 3000 mm : 8200 kg 8-fold ram guide front protection by light guard manual ram adjustment mech. overload safety device automatic lubrication user manual in GERMAN and ENGLISH according to CE rules The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 10 Wochen ab Auftrags : Türkei : 97800 € : 1848.42 € : 160 to : 1100 mm : 700 mm : 210 mm : 23 - 110 mm : 60 1/min : 630x400 mm : 8 : 95 mm : 65 mm : 325 mm : 480 mm : 2400 mm : 1430 mm : 3200 mm : 9950 kg 8-fold ram guide light guard mot. ram adjustment hyd. overload safety device automatic lubrication according to CE rules user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: neu : ca. 3-6 Wochen ab Auftrag : Türkei : 130600 € : 2468.34 € : 200 to : 1200 mm : 740 mm : 220 mm : 24 - 140 mm : 50 1/min : 950x600 mm : 100 mm : 390 mm : 15 kW : 2350 mm : 1700 mm : 3435 mm : 14900 kg 8-fold ram guide light guard mot. ram adjustment hyd. overload safety device automatic lubrication according to CE rules user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Lg.Nr. 25514 Defective Hydr. CNC - Press Brake Technical data: - Max. working length 3060 mm - Column passage 2690 mm - Max. pressing force 1300 kN - Max. distance table / plunger 370 mm - Stand projection 410 mm - Plunger stroke 215 mm - Lifting speeds - Downward speed idle max. 200 mm/sec - Upward speed 135 mm/sec - Downward pressing speed 1 to 11 mm/sec - Total drive power 18 kW - Pneumatic connection 6 bar - Space requirement approx. W 3800 x H 2400 x D 2400 mm - Weight approx. 11500 kg - with: - With 6-axis CNC control DELEM - Two-hand control panel with foot switch - crowning device - Controlled backgauge with height adjustment 5 - 860 mm - Hydr. Upper + Lower - Tool Clamping - Die table displacement pneumatically supported - Machine does not drive reverence because 2 axles right in the back gauge are without function, contr ...
RESATO HPU unit with 2 pumps Up to 1240 Bar With de-aring skid Brand new only a few hours of running
Hammelmann AQUAJET 14 / HDP 144 – 2,500 bar – 30 l/min – only approx. 476 operating hours For sale is a Hammelmann AQUAJET 14 ultra-high-pressure system with HDP-144 pump and Volvo diesel engine. The system is mounted on a tandem trailer and has a soundproof hood and a Hammelmann ES-3 control system. Technical data: Year of Make: 2017 Operating hours system: approx. 476 h according to the display Maximum working pressure: 2,500 bar Flow rate: 30 lpm High-pressure pump: Hammelmann HDP 144 Engine: Volvo TAD 572 VE Engine power: 160 kW / approx. 218 hp Emission Level: Stage IV / Tier 4 Final Pump drive power at operating point: 138 kW Control: Hammelmann ES 3 Permissible total trailer weight: 2,700 kg Ball coupling, overrun brake and 13-pin trailer plug German machine documentation available Suitable for demanding industrial cleaning work, coating removal, su ...
HUMARD 001-001/84 ist eine Hydraulische Presse, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Arbeitswerte: Druck 125 to; Presskraft 20 - 1250 kN; Hublänge 0 - 130 mm; Max. Hubgeschwindigkeit 8 mm/s; Ölmenge 80 l. Technische Daten: Anschluss 50 Hz 3x: 400 Volt; Gesamtleistung 11 kW; Maschinengewicht ca. 2100 kg; Abmessungen LxBxH 1300 x 1100 x 2400 mm. Entwickelt für enge Toleranzen; geeignet für Automotive, Werkzeugmaschinenbau, Luftfahrt und Medizintechnik. Technische Daten ohne Gewähr
Manual gantry press 20 tons Overall dimensions: 1200 x 800 x 500 mm Weight: 100 kg Auction-ID: A7-50796-418
Pneumatic spray gun to be used in combination with a paint tank. Auction-ID: A7-50796-300
Pistol grip with 30 cm rubber hose with grease fitting Foot lever Steel drum cover Steel bucket with 6 liter capacity 180 cm high-pressure rubber hose Auction-ID: A7-50796-249
Capacity 4 ton, manual, never used Overall dimensions: 500 x 400 x 800 mm Weight: 50 kg Auction-ID: A7-50796-347
The electronic digital tire pressure gauge is a modern device that allows you to quickly and accurately check your car's tire pressure. Auction-ID: A7-50796-239
An air dryer with filter and regulator, equipped with a standard 1/4\" air inlet connection. The device is designed to purify the incoming air from most liquid and solid particles. It is equipped with a pressure regulator that allows precise adjustment of the outlet air pressure, from 0 to 150 PSI. Auction-ID: A7-50796-162
Pneumatic spray gun to be used in combination with a paint tank. Auction-ID: A7-50796-425
Pistol grip with 30 cm rubber hose with grease fitting Foot lever Steel drum cover Steel bucket with 6 liter capacity 180 cm high-pressure rubber hose Auction-ID: A7-50796-49
An air dryer with filter and regulator, equipped with a standard 1/4\" air inlet connection. The device is designed to purify the incoming air from most liquid and solid particles. It is equipped with a pressure regulator that allows precise adjustment of the outlet air pressure, from 0 to 150 PSI. Auction-ID: A7-50796-262
Hydraulic press for climping hydraulic pipes, equipped with all the necessary dies for pipes from 0.5 to 50 mm, never used 0 hours and packed in a wooden crate Overall dimensions: 1000 x 1000 x 1200 mm Weight: 310 kg Auction-ID: A7-50796-110
The electronic digital tire pressure gauge is a modern device that allows you to quickly and accurately check your car's tire pressure. Auction-ID: A7-50796-39
An air dryer with filter and regulator, equipped with a standard 1/4\" air inlet connection. The device is designed to purify the incoming air from most liquid and solid particles. It is equipped with a pressure regulator that allows precise adjustment of the outlet air pressure, from 0 to 150 PSI. Auction-ID: A7-50796-62
The electronic digital tire pressure gauge is a modern device that allows you to quickly and accurately check your car's tire pressure. Auction-ID: A7-50796-139
Pressure 20 bar, max flow rate 360 l/h, never used Overall dimensions: 300 x 300 x 700 mm Weight: 10 kg Auction-ID: A7-50796-355
Pistol grip with 30 cm rubber hose with grease fitting Foot lever Steel drum cover Steel bucket with 6 liter capacity 180 cm high-pressure rubber hose Auction-ID: A7-50796-149
CONTROLS PLC SIEMENS S7-400 PRESS DESIGN drive system: hydraulic number of suspensions: 1 slide ejectors / cushion: no table cushion: no opening in table: no feedstock transport direction: back-front PRESS FORCES total force (nominal): 1000 to PRESS TABLE table surface (left-right): 2066 mm table surface (front-back): 2000 mm height above floor level: 630 mm SLIDE stroke: 900 mm SLIDE (HYDR. PRESS) approximation velocity max.: 600 mm/s working velocity min.: 15 mm/s working velocity max.: 40 mm/s return velocity max.: 390 mm/s return force: 100 to TOOL ASSEMBLY DIMENSIONS shut height (stroke down, adjustment up), BDC: 1710 mm distance table - slide max.: 1700 mm ELECTRICAL SPECIFICATIONS total power consumption: 160 kW mains voltage: 400 V mains frequency: 50 Hz DIMENSIONS / WEIGHTS height above ...
CONTROLS PLC SIEMENS S7 300 PRESS DESIGN drive system: hydraulic PRESS FORCES total force (nominal): 800 to PRESS TABLE table surface (left-right): 2000 mm table surface (front-back): 2000 mm height above floor level: 700 mm SLIDE table surface (left-right): 2000 mm table surface (front-back): 2000 mm stroke: 900 mm SLIDE (HYDR. PRESS) approximation velocity max.: 400 mm/s working velocity min.: 5 mm/s working velocity max.: 160 mm/s return velocity max.: 300 mm/s TOOL ASSEMBLY DIMENSIONS shut height (stroke down, adjustment up), BDC: 1700 mm distance between columns (H-frame): 2100 mm ELECTRICAL SPECIFICATIONS total power consumption: 370 kW mains voltage: 400 V mains frequency: 50 Hz DIMENSIONS / WEIGHTS total weight approx.: 81000 kg ATTACHMENTS (PRESSES) press automation: yes gripper transfer system ...
CONTROLS PC controller BECKHOFF PRESS DESIGN drive system: servohydraulic frame design: H-frame, tie rod quick die change system: yes feedstock transport direction: left to right SLIDE total force (nominal): 1100 to stroke: 130 mm stroke rate (max.): 60 /min COUNTER RAM nominal force: 330 to stroke: 40 mm V-RING nominal force: 500 to stroke: 40 mm TOOL DIMENSIONS lower table (left-right): 960 mm lower table (front-back): 960 mm upper table (left-right): 960 mm upper table (front-back): 960 mm shut height max.: 470 mm OVERALL SPECIFICATIONS (COIL LINES) sheet width max.: 500 mm sheet thickness max.: 16 mm coil weight max.: 8 to feedstock transport direction: left to right COIL CHAIR coil weight max.: 8 to stroke: 700 mm DECOILER coil weight max.: 8 to max. diameter of coil: 1800 mm m ...
PRESS DESIGN quick die change system: yes SLIDE total force (nominal): 100 to stroke: 20 mm stroke rate (max.): 80 /min TOOL DIMENSIONS lower table (left-right): 430 mm shut height max.: 220 mm Approx. 79 million strokes
PRESS DESIGN drive system: hydraulic SLIDE total force (nominal): 40 to stroke: 45 mm stroke rate (max.): 110 /min TOOL DIMENSIONS lower table (left-right): 300 mm lower table (front-back): 280 mm shut height max.: 90 mm DIMENSIONS / WEIGHTS space requirements -left/right-: 1835 mm space requirements -front/back-: 1500 mm total height: 1800 mm total weight approx.: 2500 kg
SLIDE total force (nominal): 40 to stroke rate (max.): 110 /min TOOL DIMENSIONS lower table (left-right): 300 mm lower table (front-back): 280 mm shut height max.: 180 mm DIMENSIONS / WEIGHTS space requirements -left/right-: 1835 mm space requirements -front/back-: 1500 mm total height: 1800 mm total weight approx.: 2500 kg
SLIDE total force (nominal): 80 to stroke rate (max.): 120 /min V-RING stroke: 90 mm TOOL DIMENSIONS lower table (left-right): 420 mm lower table (front-back): 420 mm upper table (left-right): 420 mm upper table (front-back): 420 mm DIMENSIONS / WEIGHTS space requirements -left/right-: 2970 mm space requirements -front/back-: 1665 mm total height: 242 mm total weight approx.: 6000 kg
CONTROLS SIEMENS SIMATIC PRESS DESIGN drive system: eccentric / crank PRESS FORCES total force (nominal): 160 to PRESS TABLE table surface (left-right): 1200 mm table surface (front-back): 970 mm SLIDE stroke rate (max.): 90 /min SLIDE (MECHAN. PRESS) slide adjustment: 120 mm ELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 Hz DIMENSIONS / WEIGHTS space requirements -left/right-: 3200 mm space requirements -front/back-: 1600 mm total height: 4400 mm total weight approx.: 32000 kg
CONTROLS conventional PRESS FORCES total force (nominal): 160 to PRESS TABLE table surface (left-right): 1000 mm table surface (front-back): 850 mm SLIDE stroke: 705 mm TOOL ASSEMBLY DIMENSIONS shut height (stroke down, adjustment up), BDC: 1205 mm Machine hours: 78571
CONTROLS PLC SIEMENS SIMATIC OP 47-12 PRESS FORCES total force (nominal): 200 to PRESS TABLE table surface (left-right): 2440 mm table surface (front-back): 1500 mm SLIDE table surface (left-right): 1500 mm table surface (front-back): 1100 mm stroke: 180 mm SLIDE (MECHAN. PRESS) slide adjustment: 150 mm stroke rate (min.): 20 /min stroke rate (max.): 120 /min main drive power: 45 kW OVERALL SPECIFICATIONS (COIL LINES) sheet thickness max.: 2.5 mm DECOILER sheet width max.: 300 mm sheet width (min): 30 mm coil weight max.: 3 to max. diameter of coil: 1500 mm mandrel expansion range from: 460 mm mandrel expansion range up to: 530 mm LEVELLER UNIT sheet width max.: 30 mm sheet width (min): 300 mm number of leveller rolls: 9 diameter of leveller rolls: 30 mm number of intermediate rolls: 11 feed ...
A mechanical eccentric press is offered. Mechanically operated press ram. Worktable with T-slots and a central through opening. Operating mode selector switch for single stroke and continuous stroke. Control panel with on/off pushbuttons. Emergency stop switch. Indicator light. Foot switch with protective cover. Side-mounted compressed air service unit. Protective guard in the press area. The machine features a heavy-duty press frame and a worktable for mounting dies. The press area is accessible via a hinged protective guard. Inspection possible by prior arrangement.
Factory Number 056-005/1 Machine Type Hydraulic Single-Column Press Press Force 1,600 kN / approx. 160 t Table Size 900 × 630 mm Ram Surface 750 × 450 mm Max. Installation Height / Opening 800 mm Min. Opening 300 mm Ram Stroke 500 mm Hydraulic Pressure 160 bar Connected Load 11 kW Connection Voltage 400 V / 50 Hz Control Voltage AC 230 V Rated Current 24 A Supply Line Fuse 50 A CE Marking
used
PA 30 ist eine Pneumatische Presse, ausgelegt auf Präzision, hohe Genauigkeit und Zuverlässigkeit. Arbeitsfähigkeiten: Hublänge 35 mm; Ausladung 61 mm. Hauptspezifikationen: Hublänge 35 mm, Tiefenmaß 61 mm. Erreicht enge Toleranzen; typische Einsatzbereiche: Automobil, Uhrmacherei, Werkzeugmaschinen, Luftfahrt und Medizintechnik. Technische Daten ohne Gewähr
Additel 681 20 Bar Digital Pressure Gauges; ; Pressure Range: 0 to 20 Bar (300Psi); Accuracy: ± 0.2% FS; Surcharge: 24 Bar; Media: Gas/Liquid (GL); ; Internal reference: FA-1297; Auction-ID: A1-50994-1149
USED PROMECAM PRESS BRAKE 35T Year: 1986 Serial No.: T2 035 20 440 Power: 350 KN (35 Tons) Bending Length: 2000 Passage Between Upright: 1700 Maximum Stocked: 105 Equipped with 1 Electric Stop 1 MBC Programming Controller 1 Bending Lot V Dimensions and Weight 3350x2100xH1750mm - Weight: 2500 kg Auction-ID: A1-50950-64
USED NOVAXESS SPRINKLER UNIT TYPE HP70B PRO WITH OIL COOLING Serial No.: 6694 Year: 2018 Equipped with 1 HP 70 bar pump with flow rate 30 liters/minute 1 930 liter oil tank 1 Hydraulic lifting kit 1 Duo of cartridge filters mounted 90μ + 10μ series 1 Hyfra cooling unit type Gama 13 Dimensions and weight 2500x1100xH1600 mm - weight 450kg Auction-ID: A1-50950-60
Used LBM BR101 PRESS Serial No.: 10838 Max ram speed: 440 mm/s Slide stop time: 18 ms Max. ram stroke: 200 mm Max force: 10000 daN (10 tons) Dimensions and weight 1300x1000xH2450mm - weight 1500kg Auction-ID: A1-50950-36
Standard configuration Machine ⦁ Stable machine frame as all-steel construction ⦁ Ram, stress relief annealed: Highly resistant to torsional forces, of ample size ⦁ Spherical ram suspension, with ram tilt ⦁ Electro-hydraulic downstroking drive with 4-cylinder technology ⦁ Modern block hydraulics with control valves mounted on the cylinder ⦁ Electronic pressure balance ⦁ Measuring system ⦁ Control panel with LCD panel, footswitch für Emergency up, down and E-STOP ⦁ Oil cooler ⦁ Switch cabinet cooling (air-air heat exchanger) ⦁ Modern machine design Backgauge system ⦁ Backgauge system 2-axes ⦁ 2 pieces back gauge fingers Tool holder ⦁ Manual upper tool clamping ⦁ Hydraulic lower tool clamping Crowning ⦁ Manual crowning Lower tool shifting ⦁ Lower Tool Adjustment Safety ⦁ Standard Safety equipment: Emergency Stop button, manual roller shutte ...
Standard configuration Machine ⦁ Stable machine frame as all-steel construction ⦁ Ram, stress relief annealed ⦁ Spherical ram suspension, with ram tilt ⦁ Electro-hydraulic downstroking drive with 4-cylinder technology ⦁ Modern block hydraulics with control valves mounted on the cylinder ⦁ Electronic pressure balance ⦁ Measuring system ⦁ Hydraulic oil filled in the machine (lifetime lubrication) ⦁ Oil cooler ⦁ Switch cabinet cooling (air-air heat exchanger) ⦁ Modern machine design Backgauge system ⦁ Backgauge system 2-axes Tool holder ⦁ Manual upper tool clamping ⦁ Shifting: programmable Crowning ⦁ Manual crowning: Integrated in the table, manual adjustable crowning via wedges Lower Tool Adjustement ⦁ Lower tool adjustment CNC, programmable Safety ⦁ Standard Safety equipment Control ⦁ TRUMPF TASC 6000 Operation ⦁ Communication Track ...
Working width: 3550 mm Working height: 2550 mm Number of cylinders: 5 St. Hess Quickstep Frame Press ---------------------------------- Summary of Technical Specifications (Please inquire regarding any additional accessories that may be included) --------------------------------------- General --------------------------------------- Working width: 3550 mm Working height: 2550 mm - Siemens S7-1200 control system (replaced in 2024) PLC control for automated pressing cycle, (optional: configurable for specific pressing cycles, such as for counter-dowels or mortise-and-tenon joints) manual control mode also available - Hydraulic power unit and hoses replaced in 2024 Features: --------------------------------------- > Hydraulic: Yes > Number of vertical pressing cylinders: 3 > Number of horizontal pressing cylinders: 2 > Vertical adjustment method: Electro-hydraulic (long-stroke cylinders) > ...
maximum number of results exceeded
please refine your search
4.500 € 
