136,426 used machines on RESALE, but how to find them? Machine Search
MAHO MH 1000 C CNC Vertical Milling machine Serial No. 11536 Control CNC Philips 432 Table dimensions 800 x 1.000 mm Cross travel (Y) 600 mm Longitudinal travel (X) 1.000 mm Vertical travel (Z) 800 mm Spindle taper ISO 50 P.D.B. Speed 20-4000 rpm Auto feed 1-4000 Rapid (mm) 10000 Power kW 22 Weight 7.200 kg With assembled copy device. Many Accessories and tools
Offered is a conventional Vernier universal milling machine. 3-axis digital readout DRO. Including swiveling milling head, integrated swivel arm up to 250kg. Inspection by appointment possible.
roll diameter: 650 mm roll length: 2100 mm rolls drilled: Peripher gebohrt Nip adjustment: hyraulisch total power requirement: 160 kW Condition: used, completely overhauled, with warranty Specification: Meccaniche Moderne rolling mill 650 x 2100 mm - used Model Monoblock – motor under the rolls - Roll diameter: 650 mm - Roll length: 2100 mm - Peripherally drilled rolls for water cooling - Hydraulic gap adjustment: new - Hydraulic unit: new - Tiltable guide plates - Rolls mounted on bronze bearing bushes with corresponding lubrication system - NEW hydraulic unit with DropSa distributors for lubrication of the bronze bushings - Rolls with new ball joints, manufactured by Johnson-Fluiten, for connection to the water circuit - New AC motor: power 160 kW - 400V - 50 Hz - 2x NEW safety brakes for drive motor for EMERGENCY STOP - Stainless stee ...
roll diameter: 650 mm roll length: 2100 mm rolls drilled: Peripher gebohrt Nip adjustment: hyraulisch total power requirement: 2x 132 kW Condition: used, completely overhauled, with warranty Specification: Pluridrive rolling mill 650 x 2100 mm - used External gearbox model - motor placed on the side of the machine - Roll diameter: 650 mm - Roll length: 2100 mm - Peripherally drilled rolls for water cooling - 2 new AC motors: Power 2x 132 kW - 400V, 50 Hz - Cardan joints between gearbox and rolls - New drive gearbox - Hydraulic gap adjustment: new - Hydraulic unit: new - Tiltable guide plates - Rolls mounted on bronze bearing bushes with corresponding lubrication system - NEW hydraulic unit with DropSa distributors for lubrication of the bronze bushes - Rolls with new ball joints, manufactured by Johnson-Fluiten, for connection to the water circu ...
The machine is in good technical condition, testing is possible by prior arrangement.
Key data: 3000 mm, 4000 mm, 1500 mm
Heyligenstaedt Heynumill 2700-PF 3/5 axis CNC gantry milling machine with integrated C-axis and interchangeable milling heads. Hsbi Ssyaazmsf Iwxonh Control Heidenhain TNC 430 X-axis Y-axis Z-axis 3,000 mm 4,000 mm 1,500 mm At Heynumill, the complete hydraulics were renewed in 2018, all electrical cables were replaced, the spindle cooling unit, both longitudinal conveyors were renewed and the heads were completely overhauled. The entire repair cost €160,000. In 2020, the milling gear was renewed.
Inv. Num. : 8965 Type: FSQ 80 NC Producer: TOS Created: 1989 Parameters: Control system: HEIDENHAIN NS 700 Work table length: 3000 mm Work table width: 800 mm Maximum vertical spindle speed: 2500 1/min X-axis travel: 3000 mm Y-axis travel: 900 mm Travel Z axis: 1000 mm Machine height: 3500 mm Machine length: 5660 mm Machine width: 4400 mm Machine weight: 18000 kg
Batch wet mill for the iron-free grinding of mineral suspensions. Lining (Al2O3) completely renewed in 2011. The mill and drive unit (18.5 kW bevel gear motor) are mounted ready for use on a stable base frame. Incl. sealing plug, drain tap / drain strainer and original documentation. Designed for a regrind filling of 3,900 kg and a ball filling of 3,350 kg. There are 2 identical mills available. Available for an extra charge: control cabinet incl. on-site control unit and grinding balls.
This 4-axis Mazak NEXUS HCN 6000 was manufactured in 2006. It features a Mazatrol 640M Nexus control, 800 mm travel in X, Y, and Z axes, and a B-axis rotation of 360°. The spindle speed reaches up to 10,000 rpm, and it includes a 120-position tool magazine. The table can handle loads up to 1,000 Kg. Consider the opportunity to buy this Mazak NEXUS HCN 6000 turn-mill centre. Contact us for more information.
This 7-axis DMG GILDEMEISTER GMX 250S Linear was manufactured in 2008. A turn-mill centre featuring the advanced Heidenhain Plus IT 3D CNC Pilot 4290 control unit, it represents the pinnacle of turning and milling capabilities. Contact us for more information.
This Okuma LB400-M was manufactured in 2007. A robust turn-mill centre featuring a swing diameter over bed of 620 mm and over saddle of 420 mm. It offers a bar capacity of 80 mm and a chuck size of 400 mm. The spindle operates at speeds up to 3,500 rpm, powered by a 45 Kw motor. Includes a 12-position motorized turret. Contact us for more information about this machine.
This 3-axis Parpas MT100 was manufactured in 1995, featuring a large working envelope of 3500x2000x1000 mm and equipped with 2 cast iron teams. Ideal for complex milling tasks, consider the opportunity to buy this Parpas MT100 Bed Type Milling Machine. Contact us for more information.
This 4-axis MIYANO BNJ 42S lathe was manufactured in 2004, featuring dual turrets and a Fanuc 18iT control for precision turning operations. It has a bar passage capacity of 42 mm and spindle speeds up to 5000 rpm. Equipped with a LNS Hydrobar MiniSprint bar loader and both standard fixed and motorized tool holders, this machine optimizes productivity. Consider the MIYANO BNJ 42S machine we have for sale. For more information about this lathe, please reach out to us.
This 9-axis NAKAMURA-TOME WY150 was manufactured in 2023, featuring a turn-mill centre with a comprehensive toolholder setup including 6 external, 4 internal, 3 radial rotating, and 12 axial rotating holders, plus a collet chuck and a 3-jaw chuck. Consider the opportunity to buy this NAKAMURA-TOME WY150 turn-mill centre. Contact us for more information.
This 3-axis Parpas SL100 Bed Type Milling Machine was manufactured in 1989. It features a large working envelope of 2500x1500x1000 mm and is equipped with 2 steel teams. Consider the opportunity to buy this Parpas SL100 Bed Type Milling Machine. Contact us for more information.
This 3-axis Nicolas Correa Euro 2000 was manufactured in 1997. It features a Siemens 840 D control system and a Ganfior electro-spindle capable of reaching 10,000 rpm. The working envelope is 2000 × 1250 × 700 mm with a spindle taper of SK40. It supports a maximum table load of 4,000 kg and weighs 13,000 kg. If you are looking to get high quality milling capabilities consider the Nicolas Correa Euro 2000 machine we have for sale.Contact us for more information.
This Weinig Unicontrol 10-5 was manufactured in 1998. A robust used window manufacturing machine, it features a working width of 40-220 mm and motor powers up to 15 kW for various machining units. It includes advanced features like a synchronization device, electronic height adjustment, and an automatic turning system for efficient one-man operation. If you are looking to get high-quality milling capabilities, consider the Weinig Unicontrol 10-5 machine we have for sale. Contact us for more information.
This HOMAG Optimat LPP306 was manufactured in 2019. A used planing and profiling machine featuring six working spindles, it handles workpiece widths up to 250 mm and heights up to 160 mm. Equipped with PowerControl and powerTouch LPP300 for enhanced control, it offers feed speeds from 6 to 24 m/min. Spindle speeds are adjustable up to 8,000 rpm, ensuring versatility and efficiency in wood milling applications. Contact us for more information about this machine.
This 3-axis VHF CAM 2030 Bed Type Milling Machine was manufactured in 2004. It features a substantial weight of 450kg, ensuring stability and robust performance for precision milling. Consider the opportunity to buy this VHF CAM 2030 Bed Type Milling Machine. Contact us for more information.
This 3s JOBS THORA RT Bed Type Milling Machine manufactured in 2016 features a robust table measuring 1,200 mm by 1,200 mm, accommodating workpieces up to 5,000 kg. With a spindle speed of 5,000 rpm and a tool magazine capacity of 40 tools, it offers efficient milling capabilities. Consider the opportunity to buy this JOBS THORA RT Bed Type Milling Machine. Contact us for further details.
Maho MH-C 700 All employees speak Dutch, German and English. Prices are exclusive of VAT. Shipping is possible (at an additional cost). (Subject to changes and errors in technical data, information and prices as well as prior sale.)
Horizontal BAZ DECKEL MAHO DMC 60 H Linear with 2-fold pallet changer and 180 magazine locations Year of Make: 2009 Control: Sinumerik 840D Technical data: Spindle speed: 0-18,000 min-1 Drive power: 35KW Torque: Spindle mount: HSK 63 Number of magazine slots: 180 pieces Number of pallets: 2 Pallet size: 500x500mm Travels: X-axis: 630mm Y-axis: 800mm Z-axis: 650mm C-axis: 0.001° All axes have linear actuators Accessories: -Coolant system -Chip conveyor Machine was regularly serviced Video available on request.
OMEGON Freesbank LxWxH = +/- 1500x 1500 x 2350 mm Table = 1150 x 260 mm All employees speak Dutch, German and English. Prices are exclusive of VAT. Shipping is possible (at an additional cost). (Subject to changes and errors in technical data, information and prices as well as prior sale.)
x-travel: 1.100 mm y-travel: 900 mm z-travel: 1.250 mm control: SIN 840 D spindle turning speed - gearbox stage 1: 20 - 1.333 1/min. spindle turning speed - gearbox stage 2: 1.333 - 8.000 1/min. power capacity at 60% / 100 % load: 50 / 37 KW tool taper: SK50 B - axis: 360 x 0,001 ° rotary table speeds infinitely variable: 1 - 500 U/min feed X/Y/Z/-axis: 1 - 60.000 mm/min rapid traverse: 60 m/min feed capacity X/Y/Z: 17 kN numbers of pallets: 2 pallet size: 800 x 800 mm table load: 1,50 t tool magacine with: 120 Plätzen tool length - max.: 600 mm tool diameter: 135 mm wotkpiece diameter with 2 vacant positions: 350 mm weight of tools max.: 60 kg total power requirement: 150,00 kW weight of the machine ca.: 35,00 t dimensions of the machine ca.: 11,50 x 7,40 x H4,25 m Machining center with control SIEMENS SIN840D, H/V-head and turning-operation, Pallett-changer with 2 palletts and hydr. ...
Travel path X/Y/Z: 1670mm/800mm/900mm, Speed: 4000rpm, Tool positions: 16, Tool holder: SK40, Table dimensions X/Y: 2000mm/900mm, Weight: approx. 4500kg, Operating hours: approx. 9680h. According to the error message, the standstill monitoring of the Z-axis is defective. Documentation available. An on-site inspection is possible.
Fabricante JUARISTI Modelo TS-5 MG 20 5 EJES Año 1996 CNC HEIDENHAIN TNC-430 CA Mesa Superficie de la mesa 2.000 x 2.500 mm. Tipo mesa Juaristi MG-20 Peso admisible sobre mesa 20.000 kg. Giro mesa (Eje B) Continuo (0.001º) Ejes Curso trasversal (Eje X) 5.000 mm. Curso longitudinal (Eje W) 2.000 mm. Curso vertical (Eje Y) 2.500 mm. Curso axial (Eje Z) 800 mm. Ejes controlados X, Y, Z, W, B Avance rápido ejes 10.000 mm/min Cabezales Diámetro de la caña 150 mm. Cabezal universal 45º manual INCLUIDO Cabezal salida directa INCLUIDO Cono ISO 50 Número de gamas 2 Velocidad cabezal 0-2.000 rpm Gama baja 12 – 732 r.p.m. Gama alta 733 – 2.000 r.p.m. Giro a par constante 12 – 183 r.p.m Giro a potencia constante 183 – 2000 r.p.m. Potencia de cabezal 37 kW Equipamiento Refrigeración externa INCLUIDO Volante portátil HEIDENHAIN HR-410 Herramientas y ...
Tool milling machine Emco FB3 Movements in X-Y-Z = 300-200-350 mm spindle with quill ISO-30 ISO-30 horizontal spindle Angle head swivels by ±90° Feed and rapid traverse in X and Y Angle table 600 x 180 mm Digital display Heidenheim ND780 Year of Make: 2006 Cleaned and tested
x-travel: 700 mm y-travel: 350 mm z-travel: 450 mm table surface area: 940 x 510 mm spindle taper: SK 40 spindle turning speed range: 32 - 1600 U/min feed - longitudinal/cross: 8 - 400 mm/min feeds vertical: 4 - 200 mm/min total power requirement: 4,5 kW weight of the machine ca.: t dimensions of machine L x W x H: 1,85 x 1,62 x 1,83 m Accessories: vertical head with quill retraction, univ. table, counter bearing, coolant The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
CNC Universal – Milling & Drilling Machine DECKEL MAHO DMU 80 P hi-dyn With track control Heidenhain iTNC 530 Year of Make: 2004 Travel: X 800 Y 600 Z 700 Speed range: 0 – 12,000 rpm infinitely variable ( SK 40 ) With the following accessories: NC Swivel rotary table 0 630 mm Swivel milling head ( Horizontal + Vertical ) Universal tool changer with 60 magazine positions as a double gripper ( SK 40 ) Full protection cabin with sliding doors and interior lighting 50 pcs SK 40 tool holders IKZ – 40 bar Chip conveyor Rotoclear 3 D Probe Heidenhain Electronic handwheel Operating mode 3 + 4 3-Piece Height Adjustable Machine Shoes Operating Instructions THE MACHINE COMES FROM AN INSTITUTE AND IS IN TOP CONDITION POWER-ON HOURS: 29496 hrs PROGRAM HOURS: 10050 hrs.
Key data: 800 mm, 360 mm, 450 mm
Milling machine for horizontal and vertical use, speed range 22.4-1,000 rpm in 12 gear stages Rapid traverses for longitudinal, Qer, and vertical, drive power 5.5 KW Dimensions 2000 x 2650 x 1775 Weight 2500 kg Accessories: Various tools by arrangement, including green side cabinet
Micronizer mill made of 316 stainless steel by HOSOKAWA. MICRON PROCES MS20 model. Material Stainless Steel 316/316L Technical characteristics Model MICRON PROCES MS20 Documentation No documentation Status In your state Manufactured by Hosokawa
Stair stringer milling machine SCHEER TW 4 + router HM 16 everything is in a very good, mint condition in terms of appearance and technology, the device has been used very little everything works perfectly You can start working with it immediately they are all machines for commercial use, no DIY store scrap Stair stringer milling machine SCHEER TW 4 this allows you to mill out steps and risers very precisely and accurately with the hand crank you can even work on curved butt surfaces, you can also use it to make millings on other panel materials, for example on worktops with hardened guide shafts on which the cross support with router is located with ball guide bushings, so the device can be moved very easily, accurately and safely with 4 screw clamps, the device can be securely clamped on the cheek or on similar workpieces the cross support has 2 stops each in the longi ...
Key data: 700 mm, 250 mm, 350 mm
Beautiful Rambaudi V2 XYZ= 700x250x350 The stroke of the upper ram is 400 mm Table dimensions 1070x300mm Quill with R8 cone Feeds and rapids on X Rapids on Z Feed up/down on the quill Spindle speed 65 to 4750 Head can turn Automatic Bird Lubricator DRO on 3 axes Some tools
Manufacturer ZAYER Model 30 KMU-5000 Year 1999 CNC HEIDENHAIN TNC-430PA Table surface 4,700 x 1,200 mm. Strokes (X/Y/Z) 3,400/1,250/2,000 mm. Shaft Outlet (W Axis) 500 mm. ISO-50 Head Cone Main Motor Power 37 kW 45º Automatic Head INCLUDED Head Rotation 45º Automatic Rotation 0.001º/0.001º Head revolutions 45º 3,000 rpm 45º ISO-50 Head Cone Continuous Twist Head INCLUDED Twist head revolutions 3,000 rpm Twist Head Cone ISO-50 Ram with cane INCLUDED Shank diameter 150 mm. ISO-50 Rod Cone Internal and external cooling head 45º and rod INCLUDED External cooling twist head INCLUDED Semi-automatic head pickup INCLUDED Automatic Loading Tools INCLUDED Loader Positions Htas 60 AITEK Pickup Station for 45º head storage and Twist Head INCLUDED Chip Evacuator INCLUDED HEIDENHAIN HR-410 Portable Steering Wheel RENISHAW MP 16+SP2/1 Piece Measurement Probe Motors + ...
This 5-axis Hurco CNC TMX 8 MYSi was manufactured in 2023. It features a maximum turning diameter of 508 mm and a turning length of 560 mm, with a main spindle speed of 4,500 rpm and a sub-spindle speed of 6,000 rpm. The machine includes a tool turret with 12 stations and a rapid traverse of 24 m/min in the X-axis. If you are looking to get high-quality turning and milling capabilities, consider the Hurco CNC TMX 8 MYSi turn-mill centre. Contact us for further details.
Key data: 1600 mm, 710 mm, 700 mm
HEIDENHAIN TNC 124 Travel X-axis Travel X-axis 1600 mm Travel Y-axis Travel Y-axis 710 mm Travel Z-axis Travel Z-axis 700 mm Height table to vertical spindle 50 – 750 mm Height table to horizontal spindle 60 – 760 mm Working table Working table 2200 x 550 mm Table load 3000 kg Drive power AC milling motor Main motor power AC 11 kw Tool taper ISO 50 Spindle speeds stepless 40 – 1600 rpm Feeds x,y feeds x;Y 2000 mm/min Rapid feed x,y, 5000 mm/min Feed Z Feed Z 1000 mm/min Rapid traverse Z Rapid feed Z 2500 mm/min Machine weight approx. Machine weight approx. 8000 kg Equipment Electronic handwheel / elctronical hand-wheel HEIDENHAIN Table enclosure Hydraulic tool clamping Universal milling head Coolant system Bodenwanne / floor-pan Documentation Additional /additional Completely new replacement gearbox from spare parts stock Completely new gea ...
Key data: 300 mm, 150 mm, 250 mm
Hello, We hereby offer you a used universal/vertical milling machine, type SH 4 D, from the manufacturer Steinel. Manufacturer: Steinel Model SH 4 D with vertical milling head FRP 3 Machine No. 8160 Travels X-Y-Z axis X = 300mm, Y = 150 mm. Z = 250mm. Table dimensions 740 x 200 mm Clamping surface 620 × 130 mm Spindle speed 32 – 1250 rpm Feed stages 0.2 / 0.32 / 0.5 / 0.63 / 1 / 1.6 mm/min Quill stroke / drilling spindle stroke 100 mm Power main motor 1.5 kW Weight approx. 800 kg Dimensions approx. 1,100 × 1,300 × 1,600 mm Conventional control Note: The aforementioned technical data have been taken from the operating instructions, brochures of the manufacturer or other sources, for which we cannot assume any liability for the correctness and completeness. Scope of delivery: 1 piece used Universal/Vertical Milling Machine, Steinel, Type SH 4 D Area of ap ...
Key data: 3400 mm, 2700 mm, 1250 mm
Portal Milling Machine JOBS JOMACH 241 Year of construction: 1998 Travel X: 3400 mm Travel Y: 2700 mm Travel Z: 1250 mm Numerical Command: CNC Siemens SINUMERIC 840 D Table size: 3000 x 1500 mm Distance between uprights: 1700 mm 1 Tool Changer 32 Tools ISO 50 + 1 Tool Changer 32 Tools HSK-63 3 Milling heads - Axe C: 2 heads TWIST - ISO 50 + HSK 63 A + 1 head 3 axes ISO 50 Weight: 44 T
CNC Fixed Bed Milling Machine CORREA type CF 17 D Year of construction: 2001 Travel X: 2000 mm Travel Y: 800 mm Travel Z: 800 mm Numerical Command: HEIDENHAIN 426 Spindle: ISO 50 Spindle speed: from 20 to 3000 RPM Table size: 2000 x 700 mm Max weight on table: 3500 kg Spindle motor: 17 kW Dimensions (L x W x H): 5300 x 2900 x 2800 mm Weight: 9 T
EXERON DIGMA HSC 600 milling center was built in 2010 in Germany by Exeron GmbH. It is an extremely versatile yet compact machine designed for the production of precision tools and moulds. A number of state-of-the-art technical solutions, combined with extensive equipment, guarantee excellent repeatability of the manufactured parts over many years of intensive operation. The EXERON DIGMA HSC 600 is distinguished by its extremely rigid gantry structure, made of polymer concrete. The entire workspace has been fully maximised to ensure maximum freedom of operation. It features all the necessary equipment, i.e. a reliable electro-spindle, a 30-position tool magazine and a large work table with a length of 900 mm and a width of 550 mm. The machining process is performed fully automatically in HSM (High Speed Cutting) technology. This technology allows a significant reduction in cycle ti ...
This 8-axis DN SOLUTIONS PUMA TT2100SYY was manufactured in 2023. As new, showroom model. It features a twin-spindle and twin-turret configuration, with a maximum spindle speed of 5,000 RPM and a bar capacity of 65 mm. The machine is equipped with 24 turret stations and high-rigidity linear roller guides for enhanced stability. If you are looking to get high-quality turning capabilities, consider the DN SOLUTIONS PUMA TT2100SYY turn-mill centre we have for sale. Contact us for further details.
This Gabianni T-Module 80/1600 was manufactured in 1997. A robust planing machine, its ideal for precise shaping and sizing of materials in various industrial applications. Contact us for more information.
x-travel: 4.000 mm y-travel: 1.700 mm z-travel: 1.500 mm control: HEIDENHAIN iTNC 530 clamping table: - surface area: 4.200 x 1.100 mm max. workpiece weight: 10.000 kg/m² T-slot number x size: 7 x 22 mm Abstand 150 mm feeds: - X-, Y- and Z-axis, stepless: 2 - 10.000 mm/min Orthogonal indexable milling head: - Swiveling area front/back level: 0,02 x 0,02 ° = 162 Pos., Power at S1/S6 ED: 30 kW Speed range, stepless: 60 - 6.000 min-1 max. torque: 1.500 Nm tool taper: SK 50 – DIN 69871 ZF - Gearbox: 2 Getriebestufen automatic tool changer ATC: - Tool places: 60 Plätze diameter of tools max.: 125/200 mm workpiece length: 400 mm weight of tools max.: 25 kg changing positions: Horizontal/Vertikal total power requirement: kW weight of the machine ca.: 50 t dimensions of the machine ca.: 11,0 x 6,0 x 4,6 m Equipment / Accessories Universal milling head UAD, 0.02x0.02°, positioning via inter ...
Travel X/Y/Z: 600mm/400mm/500mm, Speed: 8000rpm, Tool holder: SK40, Feed rate: 10m/min, Rapid traverse: 20m/min, Table dimensions X/Y: 1000mm/600mm, max. table load: 500kg. Machine dimensions X/Y/Z: approx. 3560mm/2700mm/2250mm, Weight: approx. 6500kg, Operating hours: approx. 66000h, Spindle hours: approx. 18000h. Including approx. 30 SK40 holders and 2x Allmatic hydraulic vices. Documentation available. An inspection on site is possible. Without IKZ and tool changer.
: 560 mm : 320 mm : 400 mm : 950x450 mm : 1050x320 mm : 25-3600 U/min : SK 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Verfahrweg X/Y/Z: 710mm/500mm/460mm, Tischabmessungen X/Y: 1000mm/500mm, Tischbelastung max: 500kg, Werkzeughalter: SK40, Drehzahl: 4000rpm, Maschinenabmessungen X/Y/Z: ca. 2000mm/2600mm/2250mm, Gewicht: ca. 3400kg, Steuerung: Heidenhain TNC 355, Betriebsstunden: ca. 34000h. Inklusive Kühlmitteleinrichtung, kompletter Arbeitsraumeinhausung, ca. 34x SK40 Werkzeughalter, Schlitten und Wellen zum Abrollen. Dokumentation vorhanden. Besichtigung vor Ort ist möglich.
maximum number of results exceeded
please refine your search
