pellet mill used for sale

Corundum disc mill Manufacturer: FrymaKoruma Type: MK-360/B Item #: 101031 Year of construction: 2007 Power: 45 kW Pressure product space: 4/3 bar Pressure double jacket: 6 bar Weight: 670 kg new grinding discs installed with control cabinet with double-acting mechanical seal various spare parts LBH: Mill: 1150 x 650 x 600 mm Control cabinet (large): 1000 x 290 x 1220 mm Control cabinet (small): 400 x 300 x 200 mm

Tool holder, milling tool holder -Recording: SK50 -Recording tool: MK4 -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -suitable for tool changers -Number: 6 recordings available -Price: per piece -Dimensions: 240/95/H95 mm -Weight: 3.0 kg/piece

Counter support, counter bearing, bearing block, pillow block, bearing for milling machine -Dovetail: 75 to 90 mm, 15 mm high -Bore: Ø 55 mm -Drawing with the photos -Dimensions: 130/70/H150 mm -Weight: 10 kg

Tool holder, milling holder, milling tool -Number: 4x holder SK40 -different designs -Brill chucks: flat chucks, reducing sleeves, cutter head, shell end mill, spindle tool -suitable for tool changers -is only sold complete -Weight: 5 kg

1 x used double-sided Rotoles S600 with 2 grinding units and 1x brush Working width 600mmm Speed 60m/min Calibration milling planing machines with feed rollers Best accuracy of the boards and excellent results in delamination attempts, at any speed. ROTOLES S calibration machines are the best choice for calibrating boards and slats before gluing. Rotoles S calibration milling planing machines with feed rollers Best accuracy of the boards and excellent results in delamination attempts, at any speed. ROTOLES S calibration machines are the best choice for calibrating boards and slats before gluing.

table length: 4000 mm table width: 3000 mm table load: 60 t total power requirement: 14.3 kW weight of the machine ca.: 48.5 t dimensions of the machine ca.: m Brand: FX Type: 83.300/400 Used machine Digital readout: Heidenhain ND 780 Table length: 4.000 mm Table width: 3.000 mm Table load: 60 T Movement: 2.000 mm Width T-slots: 58 mm (M30) mm Feeding: 4 - 1.500 mm/min Rapid traverse: 4.000 mm/min Power: 14,3 kW Machine weight: 48.500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 3500 mm y-travel: 900 mm z-travel: 1000 mm Control: heidenhain tnc 415B total power requirement: 22 /spindel kW weight of the machine ca.: 16.5 t dimensions of the machine ca.: 7.2x3.9x3.2 m Make SORALUCE Type Soramill SL 5000 Built in 1995 Control type HEIDENHAIN TNC 415 B Table size (mm) 5000 x 800 mm X out (mm) 3500 Y-off (mm) 900 Z-off (mm) 1000 Maximum table load 12,5 ton Speed (RPM) 20-. 2,000 Tool holder ISO 50 Feed along (mm/Rev) 5 - 10000 mm / min. Rapid traverse 12 mtr/min. Gesamtleistung(kW) 22 Length (mm) 7250 Width (mm) 3900 Height (mm) 3200 Weight 16500 kg Additional information Automatically indexierender Swivel Head with 2 x 144 positions (2.5 ° pitch) in two levels above the control programmable Cooling medium institution The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 110 mm x-travel: 4000 mm y-travel: 2000 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Stocknumber 1210014 Type of machine Floortype Boring Machine Make PEGARD Type AF11 Type of control Conventional Spindle diameter 110 mm X-stroke (mm) 4000 Y-stroke (mm) 2000 Z-stroke (mm) 300/750 Table dimensions (mm) 1200 x 1600 mm Table rotation (degrees) 360 Tool Taper Iso 50 Speeds (Rpm) 4 - 1000 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 5000 mm y-travel: 3100 mm z-travel: 1200 mm Control: total power requirement: 20/27 kW weight of the machine ca.: 65 t dimensions of the machine ca.: 15x6,2x6 m Stock number 1110051 Machine type CNC Portal milling machine Make CORREA Rapid type 50 Year of manufacture 2004 Control type HEIDENHAIN Table size (mm) 5000 x 2000 mm X out (mm) 5000 mm Y-off (mm) 3100 mm Z-off (mm) 1200 mm Table load Max 15 ton Speed (RPM) Max 18,000 Tool holder HSK 63 Gesamtleistung(kW) 20/27 Length (mm) 15000 Width (mm) 6200 Height (mm) 6000 Weight 65 ton Additional information Tool changer for 24 tools 5-axis gesteuerd The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tool holder, milling tool holder -Number: 6x SK50 recording -various versions -Ø 56 x 110 mm -Ø 46 x 130 mm -Ø 52 x 90 mm -Ø 42 x 80 mm -Ø 42 x 55 mm -Ø 32 x 60 mm -End milling cutter -Price/Sale: complete -Total weight: 24 kg

spindle diameter: 160 mm x-travel: 10.000 mm y-travel: 3.000 mm Control: ICEM 402 total power requirement: kW weight of the machine ca.: 80 t dimensions of the machine ca.: m Stocknumber 1210050 Type of machine CNC Floortype Boring Machine Make SKODA Type W 160 CNC Build in 1974/retrofitted in 2002 Type of control ICEM 402 Spindle diameter 160 mm X-stroke (mm) 10.000 Y-stroke (mm) 3.000 Z-stroke (mm) 1600 W-stroke 1250 mm Speeds (Rpm) 1 - 1.200 Feeds (mm/R) 0,5 - 8.000 mm/min. Rapid feeds 8.000 mm/min Total Power (KW) 180 KvA Weight 80 ton The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 6000 mm y-travel: 2000 mm z-travel: 3000 mm Control: heidenhain TNC 415 total power requirement: 34 kW weight of the machine ca.: 31 t dimensions of the machine ca.: 7000 mm m Stocknumber 1110055 Type of machine CNC Floortype milling machine Make ZAYER Type KCU6000 Build in 1992 Type of control Heidenhain TNC 415 X-stroke (mm) 6.000 Y-stroke (mm) 2.000 Z-stroke (mm) 3.000 Speeds (Rpm) 20 - 1.800 Admission in spindlehead BT50 Feeds X (mm/R) 5 - 5000 mm/min Feeds Y (mm/R) 5- 5000 mm/min. Feeds Z (mm/R) 5- 5000 mm/min. Rapid feeds 10.000 mm/min. Total Power (KW) 34 Lenght (mm) 11.000 Width (mm) 2.500 Height (mm) 7.000 Weight 31.000 Kg Additional information Juaristi MG6 turntable: 1500 x 1200 mm Cooling system: 2.5 Bar Tool cooling: 15 Bar The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 160 mm x-travel: 15000 mm y-travel: 4000 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Stocknumber 1210060 Type of machine Floortype Boring machine Make SKODA Type W160HC Build in 1990 Spindle diameter 160 mm X-stroke (mm) 15.000 Y-stroke (mm) 4.000 Z-stroke (mm) 1.600 W-stroke 1.250 Tool Taper Iso 50 Additional information With 3 floorplates 1880x5615 mm en 3x 1880x6400 mm 3 millingheads and 1 support 1 rotarytable Skoda S-35 C, 35 ton 2800 x 3150 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tool holder, milling tool holder -Number: 13x SK50 recording -various versions -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -only sold as a complete set -Weight: 54 kg

Tool holder, milling tool holder -Adapter -Recording: SK50 -Recording tool: 2x MK3 1x MK2 -Drill chuck reducing sleeves spindle tool -Price/Sale: complete -Weight: 9 kg

Tool holder, milling holder, milling tool -Number: 17x SK50 mounts -different designs -Brill chucks: flat chucks, reducing sleeves, cutter head, shell end mill, spindle tool -is only sold complete -Weight: 70 kg

x-travel: 14.000 mm y-travel: 1.500 mm z-travel: 3.000 mm Control: Heidenhain Itnc 530 total power requirement: 50 kW weight of the machine ca.: t dimensions of the machine ca.: m Stocknumber 1110049 Type of machine CNC floortype milling machine Make FPT Type Spirit 130 Build in 2012 Type of control HEIDENHAIN TNC Itnc 530 X-stroke (mm) 14.000 Y-stroke (mm) 1.500 Z-stroke (mm) 3.000 Speeds (Rpm) max. 4.000 Admission in spindlehead Iso 50 Rapid feeds max 25.000 mm/min Additional information Program run 9655 hour The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 4000 mm y-travel: 1000 mm z-travel: 1000 mm total power requirement: 22 kW weight of the machine ca.: 25 t dimensions of the machine ca.: 10.000 x 6.000 x 4.250 m Brand: Soraluce Type: Soramill 4 TF4 CNC brand: Heidenhain CNC model: TNC 415 B Year of make: 1995 Table length: 4.000 mm Table width: 1.000 mm X: 4.000 mm Y: 1.000 mm Z: 1.500 mm Spindle taper: ISO50 Speed: 3.000 RPM Huron milling head Motor: 22 kW Machine dimensions (lxwxh): 10.000 x 6.000 x 4.250 mm Machine weight: 25.000 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tool holder, milling tool holder -Number: 9x SK30 recording -various versions -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -with transport box -Price/Sale: complete -Weight: 10 kg

Tool holder, milling tool holder -Number: 4x SK40 recording -various versions -Collet: Ø 8/10/12/20 mm -Sale/Price: complete -Weight: 4 kg

BÜHLER Stone Mill MSUA 400 4 kw V-belt drive n=500 rpm Inlet 100 mm diameter Engine rebuildt Bearing: oil exchanged

roll diameter: 400 mm roll length: 1000 mm rolls drilled: Kernbohrung Nip adjustment: hydraulisch 0 total power requirement: 45 kW Condition: used, overhauled Specification: Rolling mill 400 x 1000 mm - second-hand monobloc model, motor under the rolls - roll diameter: 400 mm - roll length: 1000 mm - rolls: with core bore, with central chamber for water cooling - Rollers mounted on bronze bushes with oil circulation lubrication via pump, - equipped with new slewing rings for connection to the water circuit - Gap adjustment: hydraulic, NEW - Hydraulic unit NEW - Tiltable guide plates - stainless steel roller container to hold the mixture - bi-directional rods - safety brake for NOT stop - AC motor: 45 kW - 400 Volt - 50 Hz - Painting: in RAL colours according to customer requirements - new control panel with touch pan ...

roll diameter: 560 mm roll length: 1500 mm rolls drilled: Peripher Nip adjustment: hyraulisch 0 total power requirement: 150 kW Condition: used, completely overhauled, with warranty Specification: rolling mill 560 x 1500 mm - used model external gearbox - motor sideways placed at the machine - roll diameter: 560 mm - roll length: 1500 mm - model: Duplocom / pluridrive - Peripherally drilled rollers for water cooling - Cardan joints between gearbox and rollers - Individual drive for the rollers, for variable friction - hydr. gap adjustment - Hydraulic unit - Tilting steel guide plates - rollers mounted on roller bearings with appropriate lubrication - rollers with new ball bearing slewing rings, make Maier, for the connection to the water circuit - One gearbox - two individual drives, each with: 2x 75 kW - 400 V - 50 Hz - two new frequency conv ...

X-axis: 13,000 mm Y-axis: 4,500 mm Z-axis: 1,000 mm Distance between stand: 6,500 mm C-axis: 190º A-axis: 110º Rapid speed XYZ: 15,000 mm/min. Rapid response AC: 10 tpm CNC control: Siemens 840D Spindle mounting: HSK A63 Spindle speeds: 30,000 rpm. Spindle power: 20 kW Tool changer: 20 positions Torrestool tables: 16 pieces X-axis: 11,500 mm Y-axis: 3,500 mm Z-axis: 750 mm Country of origin Spain Machine dimensions LxWxH: 19,000 x 11,000 x 6770 mm Machine weight: 70,000 kg

Tool holder, milling tool holder -Recording: SK50 -Tool holder: Ø 22 x 45 mm -Assembled tool: Ø 75 x 50 mm -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -Number: 1 recording available -Price: per piece -Dimensions: 240/95/H95 mm -Weight: 6 kg/piece

Tool holder, milling tool holder -Recording: SK40 -Tool holder: Ø 28 mm -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -Number: 1 recording available -Dimensions: 60/60/H210 mm -Weight: 1.5 kg

M. No.: 0392 Equipment / Additional information: Feeding width (mm): 500 Kw: 7.5 A: 380

Corundum disc mill Manufacturer: Fryma Type: MK-95/R No.: 215747 Year of construction: 1987 Power: 3.3 kW in EEx protection new grinding disc, with spare discs with hopper mounted on a mobile wagon LBH: 800 x 600 x 1720 mm

Buhler DMWP flake mill, 1000x600, complete with electric motor

Tool holder, milling tool holder -Recording: SK50 -Tool holder: Ø 22 x 31 mm -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -Number: 1 recording available -Price: per piece -Dimensions: 220/95/H95 mm -Weight: 3 kg/piece

Tool holder, milling tool holder -Recording: SK50 -Tool holder: Ø 22 x 40 mm -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -Number: 1 recording available -Dimensions: 210/95/H95 mm -Weight: 3 kg

Bead Mill Manufacturer: Fryma Type: MS-18 No.: M17118 Year of construction: 1996 Power: 11.43 kW Pressure product space: 2.5 bar Pressure double jacket: 2 bar with double-acting mechanical seal with blocking pressure station Grinding chamber as good as new LBH: 1200 x 800 x 1600 mm

Friedrich Deckel FP 2 LB tool milling machine This universal milling machine FP 2 LB from the well-known German manufacturer Friedrich Deckel in Munich has as a special feature an extremely stable basic body and is designed as a travel column machine i.e. the machine does not lose accuracy should heavy parts (up to 1000 kg) be clamped. Another special feature is the so-called inclined bed of 45 degrees. Thus, after dismantling the universal table, it is possible, especially V-engine blocks with 90-degree cylinder angle (e.B. amerik. V8) directly clamp and process. The long travel distance of 800mm is also an advantage in this case. Lid FP 2 LB universal swivel/tilt table (± 45° / ± 15°) Lid Universal Divider Vice 160 mm Working range: X= 800 mm / Y= 300 mm / Z= 400 mm From 01.07.21 the machines are ready for collection. Dismantling and transport by the buyer.  ...

Composed of: - Pin mill, manufacturer : Condux, type CST 150 / F, pin disc diameter : 165 mm; - Dosage - Filters - Container approach --> mill housing in stainless steel;

CNC Bedmilling Machine Make: SACHMAN Model: RP 3 x 1800 mm Year: 1996 ( only 5000 hours ) Control: Heidenhain TNC 407 Table: 2000 x 750 mm Speeds: 22 - 3500 rpm Motor: 15 kW Oil cooled universal TVK millinghead

Tool holder, milling tool holder -Recording: SK50 -Recording tool: MK2 -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -Number: 1 recording available -Dimensions: 190/95/H95 mm -Weight: 3 kg

Tool holder, milling tool holder -Recording: SK50 -Tool holder: Ø 40 x 40 mm -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -Number: 1 recording available -Dimensions: 220/95/H95 mm -Weight: 4 kg

Hosokawa Powderplex Sifier Mill APP 400 Crushing and sighting Drive power 37 kW Engine speed 3000 1/min Pressure shock resistant up to 10 bar-Ü additional view terrad Very good ready-to-use condition, directly from production!

fully functioning used 3 axis milling machine, brand lid, type FP2, with vice, and many accessories.

Tool holder, milling holder, milling tool -Number: 8x SK50 mounts -different designs -Brill chucks: flat chucks, reducing sleeves, cutter head, shell end mill, spindle tool -suitable for tool changers -is only sold complete -Weight: 32 kg

Tool holder, milling tool holder -Number: 6x SK50 recording -various versions -Drill chucks: Surface chucks, reducing sleeves, cutter heads, end mills, spindle tools -suitable for tool changers -Price/Sale: complete -Weight: 24 kg

Tool holder, milling tool holder -Recording: SK50 -Recording tool: MK4 -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -suitable for tool changers -Number: 1 recording available -Dimensions: 230/95/H95 mm -Weight: 3.2 kg

USED BACHILLER STAINLESS STEEL BEATERS MILL REF.: C4750 Beater mill with a mobile disk with hard wear resistant steel plates. It can be used by two edges, against a static track. It is considered a cold mill because of the high air flow it generates.

Inlet: 450 x 580 mm Rotor width: 600 mm Rotor diameter: 450 mm Rotor blades: 3 Stator knives: 2 Motor: 55 kW

Tool holder, milling tool holder -Recording: SK50 -Tool holder: Ø 50 mm -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -Number: 1 recording available Price: per piece -Dimensions: 220/95/H95 mm -Weight: 4.5 kg/piece

Tool holder, milling tool holder -Number: 14x SK50 recording -various versions -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -suitable for tool changers -Price/Sale: complete -Dimensions: 800/320/H540 mm -Weight: 58 kg

Tool holder, milling tool holder -Recording: SK50 -Tool holder: Ø 50 x 55 mm -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -Number: 1 recording available -Dimensions: 220/95/H95 mm -Weight: 4 kg

Control: Dialog 11 with new MCP card Travel range: x-800 y-600 z-550 mm Spindle speeds: 18 – 6300 rpm Pinole by hand: 80 mm Recording: SK 40 Feed: 2 to 10000 mm/min Rapid response: 10000 mm/min Weight: approx. 4050 kg With full cab, chip conveyor, electr. Handwheel Installation dimensions: L: With controller and chip conveyor approx. 4200 mm (without conveyor approx. 3200 mm) B: approx. 3800 mm (With space to open door E-cabinet approx. 4600 mm) H: approx. 2400 mm Can be visited under electricity.

Tool holder, milling tool holder -Recording: SK50 -Tool holder: Ø 27 x 60 mm -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -Number: 1 recording available -Price: per piece -Dimensions: 250/95/H95 mm -Weight: 3 kg/piece

Year of construction 2001 Siemens 810D Operating hours 1988 Travel distances 350 x 240 x 340 Spindle speed 20 - 6300 Drive power 6.3/10 KW Total connection power 15 kW Tool holder SK40 Accessories: el. Handwheel Spühlpistole Universal swivel rotary table 400 x 280 mm, Rotation range 360 °, swivel range +105/-15 ° with electronic angle display Coolant device