pellet machine used for sale

CNC - Sheet Metal Parts - Roll Straightening Machine for plane straightening and relaxing of thermally cut sheet metal parts, for stamped parts, for sheet metal parts that have been cut to size with the sheet shear. Our roller straightening machine is a purely electric machine, not hydraulics, the electronically controlled servo motors enable automatic CNC – controlled face straightening in the continuous process. CNC – controlled precision sheet metal parts roll straightening machine for sheets from 0.7 mm to a maximum of 14 mm sheet thickness at 500 mm sheet width Largest sheet width 1,500 mm Guideline power over the full width - - Steel sheet quality SR235 from 0.7 mm to 10 mm - Stainless steel sheet from 1 mm to 6 mm Planning by - 19 piece straightening rollers with Ø 50 mm 21 pieces of intermediate rollers with Ø 30 mm 13 pieces of support roller sets with ...

CNC - Sheet Metal Parts - Roll Straightening Machine for plane straightening and relaxing of thermally cut sheet metal parts, for stamped parts, for sheet metal parts that have been cut to size with the sheet shear. Our roller straightening machine is a purely electric machine, not hydraulics, the electronically controlled servo motors enable automatic CNC – controlled face straightening in the continuous process. CNC – controlled precision sheet metal parts roll straightening machine for sheets from 0.7 mm to a maximum of 14 mm sheet thickness at 500 mm sheet width Largest sheet width 1,500 mm Guideline power over the full width - - Steel sheet quality SR235 from 0.7 mm to 10 mm - Stainless steel sheet from 1 mm to 6 mm Planning by - 19 piece straightening rollers with Ø 50 mm 21 pieces of intermediate rollers with Ø 30 mm 13 pieces of support roller sets with ...

Very high-quality CNC – controlled precision sheet metal bending machine with automatic bending sequence calculation – automatic, CNC – controlled double-sided pre-bending – conical bending device Roll diameter 350 mm Smallest weft diameter 1.1 x the roll diameter = 385 mm Maximum bending length 3,000 mm Nominal pre-bending performance over the entire bending length at 5 x D = 18 mm for sheet steel/ST40 Nominal bending performance over the entire bending length at 5 x D = 22 mm sheet steel/ST40 Drive power 22 kW Weight 13,500 kg. Three hydraulically driven rollers (one hydraulic motor per roller) - The rollers run in bronze plain bearings Hydraulic linear sub-roller adjustment Hard chrome-plated piston rods Hardened and ground rollers PILZ® Laser Validation BECKHOFF® CNC – Control with Ethernet technology and large touch screen DANFOSS® Precision Hydraul ...

Very high-quality CNC – controlled precision sheet metal bending machine with automatic bending sequence calculation – automatic, CNC – controlled double-sided pre-bending – conical bending device Roll diameter 350 mm Smallest weft diameter 1.1 x the roll diameter = 385 mm Maximum bending length 3,000 mm Nominal pre-bending performance over the entire bending length at 5 x D = 18 mm for sheet steel/ST40 Nominal bending performance over the entire bending length at 5 x D = 22 mm sheet steel/ST40 Drive power 22 kW Weight 13,500 kg. Three hydraulically driven rollers (one hydraulic motor per roller) - The rollers run in bronze plain bearings Hydraulic linear sub-roller adjustment Hard chrome-plated piston rods Hardened and ground rollers PILZ® Laser Validation BECKHOFF® CNC – Control with Ethernet technology and large touch screen DANFOSS® Precision Hydraul ...

Very high-quality CNC – controlled precision sheet metal bending machine with automatic bending sequence calculation – automatic, CNC – controlled double-sided pre-bending – conical bending device Roll diameter 350 mm Smallest weft diameter 1.1 x the roll diameter = 385 mm Maximum bending length 3,000 mm Nominal pre-bending performance over the entire bending length at 5 x D = 18 mm for sheet steel/ST40 Nominal bending performance over the entire bending length at 5 x D = 22 mm sheet steel/ST40 Drive power 22 kW Weight 13,500 kg. Three hydraulically driven rollers (one hydraulic motor per roller) - The rollers run in bronze plain bearings Hydraulic linear sub-roller adjustment Hard chrome-plated piston rods Hardened and ground rollers PILZ® Laser Validation BECKHOFF® CNC – Control with Ethernet technology and large touch screen DANFOSS® Precision Hydraul ...

I sell a 4-side brush machine suitable for windows, turrets, tables, etc. Futura MS120 Y1 X2, built in 2005 Working width 1200mm Working height 200mm Total weight 2500kg Configuration: Side grinding heads left - right H.170mm 2 underheads left - right nylon B.140mm Oscillating top head B.260mm Large grinding heads top - bottom B.1150mm Machine together with all the heads on the picture. Available the same.

May SS80 U Machine can be visited by arrangement under power

MEP Multimatic SA8, year of construction 1995 Straightening and cutting system for reinforcing steel, fully automatic, complete functional system, immediately available Plant still in operation and can be demonstrated.

Bread packaging machine Hartmann Automat GBK 220 -Sliced bread packaging machine Hartmann -Model Automat GBK 220 -Weight 1600 kg -Year of construction 1999

Good working conditions

Rogers 300 HYD Knife Roll Grinder Model: 300 HYD Size 102 Year of arrival at the plant: 1961 Space used by the machine: 7 x 2 x 1,8m Worktable dimensions: 2600 x 250,50 mm. Longitudinal table travel (stroke): 3000 mm. Magnetic system of the table: EML 15 - 115 Volts - 13 Amp - 1500 Watts. Longitudinal slide feed: 0 - 28 m/min. Cross travel without abrasive wheel: 200 mm. Cross travel with new abrasive wheel: 92 mm. Vertical Capacity: 200 mm. Abrasive wheel: Ring abrasive wheel, 26" outer dia., made up of 10 segments type 53 (S/G FLAT RS-801-B) of 6.1/2 "x 2 "x6". Each segment must indicate the maximum RPM for the ring. Abrasive wheel head speed: 560 Rpm. Cooling tank capacity: 259 liters

Bottle washing machine, Fabr. Krones, type: Lavatec KESK 245/17-120, control range 4,000 - 11,000 fl/h, for bottles with max Ø 105mm, built in 2002, Eind machine, with 180 rows of 17 bottles/row each, with pre-soft water and lye, main liquor with immersion switch and after-liquor spraying, 3 water sprays hot, cold and fresh water in stock from May!

M. No.: 167 Format (cm): 58 Equipment / Additional information: 1xreserve knife Very good condition // tested, checked and revised

REF-0 MANZINI (COMACO) CAN SEAMER FOR 3KG CANS Automatic can seamer manufactured by Manzini (Comaco) Model: A-350 Can size: 3kg Fitted with 3 seaming heads Power: 12HP Dimensions: 1,800mm width, 2,500mm length, 2,600mm height. Optional: 15-valve vacuum filling system for 3kg cans (vacuum pump included). Filling system dimensions: width 2,100mm, length 1,200mm, height 2,400mm.

Continuous drilling rig Biesse Techno Logic Masch. No 873/90 Position 1: Loader BIESSE-TECHNO LOGIC Item 2: Transfer BIESSE-TECHNO LOGIC Item 3: Transfer BIESSE-TECHNO LOGIC Item 5: Continuous drilling machine BIESSE-TECHNO LOGIC Item 6: BIESSE-TECHNO LOGIC horizontal continuous drilling rig Item 7: Transfer BIESSE-TECHNO LOGIC Item 8: Transfer BIESSE-TECHNO LOGIC Position 9: Brushing machine BIESSE-TECHNO LOGIC Item 10: Unloader BIESSE-TECHNO LOGIC Weight approx. 4 to L x W x H: 6.0 x 2.4 x 2.5 m Year of construction 1990 Dismantling by buyer The plant is in good condition, ready for operation Subject to change, error, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system+technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax: 0041 62 966 21 12

Key data: 400 mm, 650 mm, 5000 1/min

Technical data: Manufacturer: Spinner Type: TC 600-65 SMCY Year of Make: 2013 Control: Siemens 840D SL ShopTurn Travel: X 275mm, Y +50/-40 mm, Z 700 mm Switch-on hours: 12,838 h Max. swing diameter: 600 mm Max. turning diameter: 400 mm Max. turning length: 650 mm Max. Rapid Traverse: 15/24 Main spindle Max. speed: 5,000 rpm Spindle passage: 65 mm Chuck size: 210 mm Spindle power: 18 kW Torque: 150 Nm Sub-spindle Max. speed: 6,000 rpm Chuck size: 165 mm Spindle power: 10 kW Torque: 80 Nm Revolver Number of tools: 16 Tool holder: VDI 30 Rotating tools: 16 Max. speed: 6,000 rpm Power (60%): 6 kW Torque (60%): 30 Nm Dimensions and weight Dimensions L/W/H: 2.5m x 1.6 m x 2.0 m Weight: 5,000 kg Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: Large panoramic window in the work room Tool  ...

SCM st 1g Format circular saw milling machine Format sliding table in 1.2m Cutting height: 67mm 90° 40mm 45° Auslegertich kpl. Cutting width 700mm Saw blade: swivel 45°, max.250mm 1.8KW 2 motors 400V 50HZ Milling machine: rigid 90° Milling machine rpm: Speeds: 5000/7500 rpm. Milling stop max tool diameter max. 160mm Suction pipe 60 - 120mm Weight 190kg Eccentric tensioner G&STÜ-5501048

Auction-ID: A1-43429-119

Travel distances: 350 x 250 x 315 mm [ X x Y x Z ] Table size X: 576 mm Table size Y: 400 mm workpiece weight: 500 kg C-axis Pinole recording: EROWA

Kemper Soft-Star dough dividing and warp knitting machine Head machine Kemper Soft-Star 6-row dough part and automatic knitting machine with plastic funnel. The maximum hourly output of the machine is 2400 pieces per row and for our machine a total of 14,400 pieces per hour. The clock frequency is 40 strokes per minute. The operating side is in the direction of travel on the left side. The active range of the active drum is between 50 and 60 grams. - 6 rows - with plastic hopper - with Siemens Touch Panel control - Year of construction 09/2004 Electrical data Operating voltage: 400/230 Volt 50Hz Control voltage: 24 Volt DC Rated current: approx. 4kW

Travel: 825 x 680 x 405 mm [ X x Y x Z ] Table size X: 1200 mm Table size Y: 850 mm workpiece weight: 3000 kg Electrode changer: 50 - fold Generator POCON 60 Pinole recording: EROWA Heavy Duty Adapter O-Module Halogen lamp

WALDRICH SEIGEN WST IV H80 X 12000 ROLL GRINDER YEAR: 1981 / INSTALLED 1982 MAXIMUM GRINDING DIAMETER: 78” ( 1981.2 mm) WITH 32” (812.8 mm) DIAMETER WHEEL MAX DIAMETER CAPABILITY: 2500mm DISTANCE BETWEEN CENTERS: 472.40” (12000mm) MAXIMUM WORKPIECE WEIGHT: 176000 lbs. (80t) WHEEL OD MAXIMUM: 32.00” WHEEL WIDTH MAXIMUM: 4.00” WHEEL ID: 12.00” WHEEL SPINDLE POWER: 27 - 59/59 HP WHEEL DRESSER: BED MOUNTED ROLL WHEELHEAD TRAVEL: 25.60” TABLE TRAVEL: (WHEEL HEAD TRAVEL) 488.40”( 12405 mm) TABLE SPEED: (WHEELHEAD SPEED) 157.5 in/min (4000 mm/min) WHEEL SPINDLE SPEED: 450 - 1800 RPM Infinitely Variable WORKHEAD POWER: 1.9 - 59/59 HP WORKHEAD SPEED: .5 - 300 RPM WAYS: CAST IRON FULL HYDROSTATIC SLUDGE CONVEYOR: NONE COOLANT: YES FILTRATION SYSTEM: COMBINATION 2 CARTRIDGE AND FABRIC FILTER WAY COVERS: METAL TELESCOPIC POWER 3PHASE / 50-60 Hz / 200 - 50 ...

Auction-ID: A1-43429-100

Auction-ID: A1-43429-113

Label book printing machine, 4 colors, 3 colors, 2 colors or 1 color, punching unit, 2 embossing plates, various mounting plates, laminators, UV dryers, dispensers, slitter rewinders, scanner camera, in good condition, immediately available

MORI SEIKI NT6600 CNC INTEGRATED MILL TURN CENTER WITH LIVE MILLING MAXIMUM SWING OVER BED: 42" MAXIMUM WORK PIECE DIAMETER: 42" MAXIMUM WORK PIECE LENGTH: 239" MAXIMUM BAR DIAMETER: 6.4" SPINDLE BORE: 7" X AXIS TRAVEL: 41" Y AXIS TRAVEL: 26" Z AXIS TRAVEL: 242" B AXIS: +/- 120 DEG. MAIN SPINDLE SPEED: 1500 RPM MAIN SPINDLE MOTOR: 40 HP MILLING SPINDLE SPEED: 8000 RPM MILLING SPINDLE MOTOR: 40 HP ELECTRICS: 220V/3P/60Hz/216A OAD (APPROXIMATE): 490" X 182" X 169" HIGH WEIGHT (APPROXIMATE): 120,560 LBS. EQUIPPED WITH: C AXIS YAXIS B AXIS LIVE TOOLING/MILLING 20" CHUCK FS-31iA5 CNC CONTROL 140 POSITION AUTOMATIC TOOL CHANGER PROGRAMMABLE TAILSTOCK COOLANT THROUGH SPINDLE (HIGH PRESSURE) CHIP CONVEYOR Additional Control Options: Automatic Power Shut-Off MAPPS 4 System Part Program Storage: 8mb Stored Programs: 1000 Remote Communication Function ATA Flash M ...

In steel cage Auction-ID: A1-43429-65

Arm length: 1600 mm Drilling capacity in steel: Ø 50 mm Tapping in steel: M50 x 1.5 mm Spindle holder: MK 5 Spindle speeds: 28 - 2500 rpm. Spindle feed: 0.05 - 2 mm/rev Spindle stroke: 310 mm Spindle -> slab: 1500 mm max. Tension throwers; 1000 x 750 mm Clamping flat floor plate: 1820 x 986 mm Complete with: - Kuhlanlage - Operating instructions Spindle motor: 4 kW Country of origin: Czech Republic Machine Weight: 4300 kg Machine LxWxH: 3250 x 1120 x 3400 mm

Auction-ID: A1-43429-111

Without the exhaust pipes Auction-ID: A1-43429-47

Back punching machine Schmedt Präcut HHS 65; good condition; cleaned and tested; Block height max.350mm; Block thickness max.90mm; 3 replacement knives. Book block spine machine Schmedt Präcut HHS 65; good condition; cleaned and checked; max.block hight 350mm; max.block thikness 90mm; three knifes.

- Pallet feeder T 1020 FP 112 - 1. Station T1020-1-1020/6 buckles - 2. Station T800-M-2-88/6 buckles - Z2 mobile cross fold station - DESTA FSA 1000 delivery (1996)

On 2 shelves of shelving Auction-ID: A1-43429-168

Auction-ID: A1-43429-102

Label book printing machine Labelmen PW180DLU, YOC 1996, 4 colors, punching unit, embossing device, various mounting plates, laminators, UV dryers, dispensers, Slitten rewinders, in good condition, immediately Available If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.