pellet extruder used for sale

Nanjing Juli Chemical Machinery Co., Ltd. SHJ-75B PET twin screw granulator Extrusion - Twin screw extruder Twin screw extruder production line 75B machine twin Water ring Roots three- stage vacuum unit 500 vibrating screen First-class air delivery system with storage bin 300-500kg / hour, the specific output depends on the raw material melt flow rate, specific gravity, formulation and production process the screw diameter： Ф71mm； Main motor power: 132kw (Siemens bader ac motor) Main engine screw speed: 326rpm Heating power of main engine: 76kw Total installed power: 230 ~ 245kw The actual consumption is 150 ~ 160kw

Complete retrofitted line consisting of: Processable material: plasticized PVC and polyphenyl composition passive pay off Bandera 3025 extruder overhauled with Toshiba inverter 2 extrusion screws (1 for PVC 1 for polyphenyl) cable and profile extrusion head 4 meter stainless steel tank double flywheel drive (interface on line with inverter) double reel winder for 400 reels

Complete Working Melt Blown Plant Consisting of: 1 Mm 65 Extruder With 6 Heating Zones 1 Extruder Head 1 Vacuum charger 1 carpet and carpet turner 1 Reel With Meter Counter And Material Cutting 1 Electrostatic Load Control Unit And 2 Electrostatic Bars 1 Air Compressor 22kw + Soundproofing Cage 3 Dies Holes 0,20 Miss 600 Mm 1 Pyrolysis Oven X Die Cleaning 1 Ultrasonic Tank For Die Cleaning 1 Aspirator Behind The Mat For Melt Blown Formation 1 Complete System With Suction Hood And Pipes

Tecom extruder rotating head, inverter motors consumption in operation 9kw/h Productive yield 40Kg/h. Integrated castle, motorized tow adjustable in height and modified for sheds up to 4m. Mixer, dryer, automatic master doser, UV ray printing treatment. New wiring and thermoregulators. Band min 18cm Max band 80cm Bivalent screw: extrudes HD/PLT/BIO COMPOST Visible under power in Italy

Manufacturer: OFFICINA MECCANICA PREALPINA S.R.L Type/Model: T.60 L/D 35 with vent Year: 1995 Motor : 45 KW AC Condition: in good working condition Hours :20933 Screw diameter: 60 mm, recently refurbished Hour meter: 20933 Capacity of 70÷100 kg/h Pelletizing line suitable for the recycling of grinded rigid plastic materials PE, PP, PC, ABS, ABS/PC Line composition: - Single extruder - rigid materials dosing unit - die head-spaghetti - filter Cresta Ø 90 mm - hydraulic screenchanger semi-automat without interrupting the extrusion - degassing pump - cooling water bath - Electrical equipment of control and command with cooling - Sheer pelletizing unit SGS 100

NAWROCKI feed granulation line Feed granulation line from Polish producer Mechanika Nawrocki. The company has many years of experience in the production of granulators. The line consists of: - M-ROL H-122 flail mill - engine power 11 kW - M-ROL H-037/4 feed mixer with a capacity of 2 tons with scales and an additional component feeder - M-ROL T-401 screw conveyor - a silo for a ready-made granulation mixture with a capacity of 7 tons, pouring into the granulator using a screw conveyor with an inverter that allows you to precisely adjust the amount of material fed to the granulator - Nawrocki miniPelleter 18.5 kW granulator - Nawrocki miniCooler + cooler - bucket elevator receiving to the cooler - counterflow cooler - bucket elevator with a screen behind the cooler - miniCooler + aspiration team - cyclone with a lock - dust and screenings container - 2.2 kW fan Granu ...

The biconical type mixer makes a homogeneous mixture of solids. The mixing process is a common operation in manufacturing for the health, food, chemical, cosmetics, detergents, fertilizers and plastics industries. Some examples are pharmaceutical granules, flour semolina, seeds, starch, coffee beans and ground coffee, cocoa, chocolate flakes or granules, powdered milk, baby food, preparations for making dehydrated creams and soups, foliar waxes, granulated detergents, soap flakes, artificial fertilizers, powdered plastics or shredded, plastic pellets and fiberglass, etc. The Bicono mixer for solids has a rotating biconic drum that rotates at low speed, making the product slide smoothly along its smooth interior walls, making the product unforced. Characteristics: Repetitive, reproducible and scalable mixes. Low maintenance mixer. Extreme ease of cleaning. Total emptying of  ...

Drying, blending, degassing, agglomerating system for plastic materials and more Automatic process. No operator needed. Italian technology and material quality standards. Used machine reconditioned Very versatile, can be used for a variety of applications: PAPERMILL PULPER, MIXED PLASTICS, but also ORGANIC MATERIALS to be dried and compacted, PEAT SUBSTITUTE, etc. Output is a continuous stream High ROI Installed power 400 kw – average power consumption 260 kw/h Low maintenance costs Ideal for 24/7 shifts On this link you’ll see the machine connected to an extruder: https://youtu.be/Q3Ayg62mfh8

Manufacturer | Manufacturer: Uniloy Machine Type | Machine type: BWF 16 E Stations | Stations: Single Station | Single station Year of construction | Built: 2004 – overhauled in 2019 | 2004 – refurbished in 2019 Location | Location: Germany | Germany Clamping force | Clamping force: 160 kN Control Type | Control system: Beckhoff Extruder | Extruder: S 90/24D Extrusion Head | Extrusion Head: Single Head PWDS | Single head PWDS Mold dimensions mm | Mold dimensions mm (A Length / length x B Width / width x C Depth / depth): 520 x 520 x 2x180 Bottle Volume Max. | bottle volume max.: 15 L Screen Language | Monitor language: German / English | German / English Operating hours | Working hours: approx. 3000 | Around 3000 Accessories | Accessories: Conveyor belts | conveyor belts Packing table | packing table Delivery Time | Delivery time: ...

WPC production line 1. Twin-screw extruder GWC 80-156 2. Twin-screw extruder GWC 65-132 3. CAL 14000/6 calibration table 4. ROL 240 two-track haul-off 5. Saw 240 6. Cheyenne SP2 brushing machine 7. SR-RP700 wide-belt sander 8. Storage device 9. Mixer 500 / 1000L + weighing system 10. Complete line for pulverization + drying room Pulverizer Installed power: 26 [kW! Turnover 3300 [Rpm]! Capacity: 300 [kg / h]! Grain size: 65-80 [mesh]! Input material size

Processing both PVC dry blend / PVC pellets ‑ Special design extruders for a perfect PVC melting and uniform plasticization ‑ Specific rotating dies for an even material flow and thickness distribution​ ‑ Automatic calibration cages and collapsing boards ‑ Fully automatic winding stations ‑ Water cooling circuit on specifics and key points of the lines ‑ Easy machine operation by LCD touch screens ‑ High level of automation and process optimization solutions.

Blow Molding BM 5000D full electric (2005) Machine mass: 22.800 kg Year of mnufacture: 2005 Ed.05 Max width: 4780 mm Max width with open barriers: 6820 mm Control cabinet height: 1400 mm Back width: 2270 mm Max height: 3800 mm Max length: 5770 mm Horizontal stroke: 500 mm Dry cycle time: 3,2 s Max cycles number: 13 per min Air pressure: 6-10 bar Total installed power: 44 Kw Cooling water pressure: 2,5kg/cm2 Working prssure level in the working environment: 88,3 dB(A) Total weight without extruder: 11.200 kg Extruder technical data: -Screw diameter : 90 mm -Screw motor power: 53 Kw -Rotation speed: 80 rpm -Heating power+maximum head: 24 Kw The machine is out of use but removed from production for 2 years , and can be connected electrically for inspection.

complete plant multi filament polypropylene yarn 2 independent lines compound: 2 extruders diam. 45mm complete with dosamaster 2 ironing groups of 6 godets each 6 COMOLI winders 1 ATLAS COPCO 18+ compressor 1 chiller spare parts various dies for both solid wire and hollow wire hourly production about 50 / kg hh with a title of 1500 den

Calander - calender capacity 1t per hour - extruder capacity 2t per hour - two-stage cascade extruder (upper: planetary extruder; lower: single screw extruder) - three rollers - rollers drive - AC motors powered by inverters. - max width 1400 mm (in a thickness range of 100-500 myx) - max width 1000 mm (in a thickness range of 510-1000 myx) - max temperature 230C - oil / electric shaft heating - 3 winders - expansion shafts 152 and 76 mm - possibility of producing laminates by thermo-lamination

Key data: 60

Extruder 1 screw: 60 mm Ø, 25 L/D, brand: Flag, motor: 11 KW (15 hp). 6-speed gearbox with electrical panel. Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.

Key data: 80

Extruder 1 spindle Brand: Bandera, 80 Ø diám 25L/D, with two speeds, alternating current motor: 55 kw (75 hp) with variable speed drive. Two replacement spindles, one for rigid PVC and one for plasticized PVC. Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.

TECNOVA EXTRUSION LINE 130 mm.500 kg/h, PE PP PC PS ABS PET PA, Including:, Scrap silo, Extraction auger, Crammed feeder, Extruder with 130 mm screw diam.37 L/D, N. 1 vacuum degassing pump, 225 kw drive, Semi-automatic non stop screen-changer with screens diam.250 mm., Available with a [FIMIC RAS 400](https://www.germanplast.eu/listings/5241333-used-2007-fimic-ras-4 00-automatic-screenchanger), Water ring pelletizer, Drying centrifuge, Pneumatic extraction for granulate, Constructed in 2004, not working from 2010, Offered reconditioned (various steps to be agreed upon), (see how we recondition on our WHAT WE DO page on top)

For LDPE MDPE and BIO Web width from 600 mm up to 1600 mm Throughput rate 100/160 kg/h depending on materials Max production speed 80 Min/max thickness 30/200 my (tolerance sigma 2 +/- 8% Extruder with screw diam. 65 mm. 30 L/D MELT control Oscillating die diam. 100-200-300 mm. gap 1,4 mm. Blow Up Ratio 1,5 – 4,5 high capacity cooling ring with inverter on electric fan 7,5 kw Calibrating basket 1.000 max diam. Gusseting units Pull off unit min/max width 600_1600 mm. Stretching rollers 1.800 mm wide Corona treatment Back to back winding station type BA 2/1.800 Max reel diam. 1000 mm. N.2 slit and seal units Supporting tower height approx 9,0 mt. Construction year 2003 Excellent conditions Mounted but disconnected

Key data: 50 mm, 30

Used extruder in good condition with screw size: diameter 50 mm x 30v grooved intake and degassing zone Type RH 241-1-50-30v with DC drive 30.2 kW Built in 1993 Immediately available without control cabinet With control cabinet 4-6 weeks delivery time

Key data: 35 mm, 25 , 107 U/min

used REIFHÄUSER single screw extruder with screw size: diameter 35mm / 25 ld The extruder is in very good condition Type RT 78-1-35-25 New control cabinet with new motor AC -7,5kW Year of construction 1994 Quickly available

General SKU001A040 LocationBarneveld MakeBepex TypeGCS 200/40 No.10254 Year of construction1981 Main Features Motor3 KW Inlet diameter200 mm Width40 mm Specified Features - Roll compactor Roll compactorGear pelletizer (1x) Roll width40 mm Roll diameter200 mm Motor3 kW With variable speed drivecheck Roll speed3-15 rpm With dosing/compacting screwscheck With motor1.5 kW With variable speed drivecheck Speed18-90 rpm With hoppercheck Information Mounted on framecheck With switchcheck With switchgearcheck Floorspace120 x110 cm Total height170 cm Weight750 kg Extra SpecificationsPre-pressing/dosing screw is missing. Roll compactorsBepexCompactors > Roll compactorsBrand > Bepex What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the ...

Cable pelletizing machine V-C03 CE and UVV approved, max. 30-50 KG/h, 0.1-30mm diameter of cables, weight 515KG, L 1000 X W 580 X 1,700 mm, 5.18 KW, 1 year warranty, easy to move with heavy-duty castors, available from 12 KW ex location D-57223 Kreuztal. 8.900€ plus 19% VAT

year of construction 2002 - completely refurbished in 2021 Extruder 45 mm, 22 D Control Beckhoff new pinola head new wall thickness control new hybrid pump Denison were installed. The machine was running 50 h since the refurbishing, and is as new. Further informations on request!

MP BLOWN FILM EXTRUDER EBHD 80, for HDPE and LDPE, constructed in 2005, excellent conditions, Barrel Screw: Φ80 mm with mixing zone LD 28/1 nitride hard chromium steel, Barrel heating zones: 4 zones thermal power 4 KW each plus 1 filter thermal zone 4 KW., Screw Length (L/D) : 28/1, Screw Diameter (mm): 80, Screw Speed (R.P.M.) : 65, Cylinder Total Heating (KW): 16, Flange Heating (KW): 4, Number of Die Heating Zones: 3, Die Total Heating (KW): 6,6, Cylinder Cooling: 4 separates fan motors for each individual thermal zone, Cylinder Cooling Power (KW): 3,5, Installed Electric Power (KW): 70, Max Output (KG/H): LDPE 100 Kg/H, HDPE 90 Kg/h, Film Width: (Min-Max) 280 mm – 1000 mm, Film Thickness: (Min-Max) 0,018-0,200 mm, Main Driving Gear Reducer: Monobloc Reducer Italy Made ROSSI SPA”, Main Motor: AC 3 Phase Inductance Motor 30 KW (40 HP)., Main Motor Control Driving: (VFD Inverter MI ...

Extruder 1 screw: 70 Ø diam, 35 L/D. Brand: Flag, engine: 37 KW (50 hp). No electrical panel. Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.

GWELL GWC 80-156 WPC production line manufactured in 2015 is characterised by high production efficiency. WPC boards are made by combining natural components with thermoplastic polymers. This results in a material with the high aesthetics of wood and the exceptional durability of plastics, distinguished by full resistance to fungus, insects and various atmospheric factors. The production line consists of: – GWC 80/156 twin-screw extruder – GWC 65/132 twin-screw extruder – CUT 240 saw – CAL 14000/6 calibrating table – ROL 240 2-caterpillar haul-off – unloading table The WPC profile extrusion line is offered with optional heads for forming different types of profiles from these products. To date, the machine has only been in operation for a dozen days and has not been used at full production scale. For an additional charge, equipment cooperating with the line can ...

GAMMA MECCANICA EXTRUDER, Material rigid HDPE + PP, LDPE, Nominal Output HDPE+PP 1.800 kg/h, LDPE+PP 1.400 kg/h, Screw diameter 250 mm 24 L/D, BDPLAST semi-automatic screenchanger (available with fully automatic screenchanger on request), Water ring Pelletizer Gamma Meccanica, Drying centrifuge Gamma Meccanica, vibrating screen, The line is offered AS IS or RECONDITIONED

Inv. Num. : 7465 Type:- Producer:- Generated: Parameters: The line consists of the following parts: Copper wire winder (double) Gumolis Insulation Line Injection 2x Bongard (Vein Spreader) Main street Gumolis Shell.line Compensator Line unwinder Coil Housing Line Auxiliary towing Compensator Cooling Enclosure Cooling water tank Outdoor refrigeration units Large pump water system Stolberger Filling Machine Wire rewinding workstation Round semi-automatic Welding foil package Mechanical Profile Projector HV test room Thermostat - Oven 5 x Temperature unit for extruder

Two-station machine for tanks up to 10 ltr, 2 x 5 ltr, 4 x 2 ltr. with 2 extruders 90/24D, leak testing in the machine, bottle removal with lowering function. Screen in German and English

Single-station machine for containers up to 1.5 ltr. Extruder 60/20D with DC motor and Hitachi frequency converter. Double head 100 mm stitch with WDS. Cold separation. Waste punch, old pneumatic valves replaced by Festo valves. No oil or air leaks. Good condition, immediately free

Single-station machine for containers up to 10 ltr. Extruder 60/24D. Single head with viewing stripes. Clamping force 110 kN. Canisters were produced with viewing strips in 2.5 and 5 ltr

BINOVA TWIN SCREW EXTRUDER for PP HDPE, with crammed feeding unit, Barrel with 2 x 128 mm screws 40 LD, n.2 degassing pumps, positioned 2 mt.apart for better degassing, 250 kw a.c.drive ( + 1 x 355 kw spare drive), n.2 spare screws, semi-automatic screen-chager with 300 mm screens, water ring pelletizer, drying centrifuge, electric cabinet and operator desk, constructed in 2008, complete with Users manuals, drawings, CE compliance, offered as is, where is

Two-station machine for canister 4 x 5 ltr. Extruder S 100. Double and triple heads with 250 mm center to center. Clamping force 196 kN. With view strip extruder, cutting edge, removal robot, conveyor belt. Maquire mixer, refrigeration unit. Very few operating hours

CDM PREALPINA EXTRUSION LINE 105 mm 35 LD for PE PP PS PC ABS PS, total installed power 311 kw ca, average throughput rate 400 kg/h depending on material and feeding rate, The line includes a granulator 44/80 55 kw, pneumatic transport (4 kw) to buffer silo, screw extraction, Crammed feeding unit, barrel with 105 mm screw diam. 35 L/D, Vacuum degassing pump, Ceramic heaters, 132 kw drive, Hydraulic screen changer 190 mm diam., Hydraulic pack, Water ring pelletizer TT20, Centrifugal dryer, 3-ways vibro-classifier

Machine equipped for approx. 11,000 bottles per hour in 250 ml. Built in 2006. Extruder 100/24D. 6-fold head 70 mm stitch. With shapes. 2 bottles are produced in each cavity. 460V 60 Hz. Very good condition

Key data: 63 mm

We offer you a PURE LOOP extruder for sale that has been completely remanufactured in-house. This machine was put into operation for the first time in 2018 and was taken back by us from the former first owner in the course of an EREMA new machine purchase. The machine is designed for a throughput of up to 180kg per hour and is suitable for PE and PP. If you are interested in this machine, please do not hesitate to contact us!

Key data: 80 mm

We offer you an EREMA extruder that has been completely remanufactured in-house for sale. It is an EREMA RGA 80 TE, the machine is completely mechanically and electrically prepared by us before delivery, all components that do not meet our criteria are exchanged for original EREMA spare parts. The machine is designed for a throughput of up to 250-300kg per hour and is suitable for PP. If you are interested in this machine, please do not hesitate to contact us!

Key data: 140 mm

We offer you an EREMA extruder that has been completely remanufactured in-house for sale. It is an EREMA INTAREMA® 1714 TVEplus®, the machine is completely mechanically and electrically prepared by us before delivery, all components that do not meet our criteria are exchanged for original EREMA spare parts. The machine is designed for a throughput of up to 1200kg per hour and is suitable for PE as well as PP. If you are interested in this machine, please do not hesitate to contact us!

Key data: 140 mm

We offer you an EREMA extruder that has been completely remanufactured in-house for sale. It is an EREMA 1514T, the machine is completely mechanically and electrically prepared by us before delivery, all components that do not meet our criteria are replaced with original EREMA spare parts. The machine is designed for a throughput of up to 1100kg per hour and is suitable for PE as well as PP. If you are interested in this machine, please do not hesitate to contact us!

Key data: 50 mm

We offer you an EREMA extruder that has been completely remanufactured in-house for sale. It is an INTAREMA® 605K, the machine is completely mechanically and electrically prepared by us before delivery, all components that do not meet our criteria are replaced with original EREMA spare parts. The machine is designed for a throughput of up to 90kg per hour and is suitable for LDPE. If you are interested in this machine, please do not hesitate to contact us!

Extruder 2 screws : 100 mm Ø 15 L/D Brand: Mapre Model: E 2.66.100 Series No. 155 Engine: 30 KW (40 hp) Parallel spindles forced feeder CM 80 headcutter system with geared motor type F 30 AG 19 123752, no. 1910072-249, brand PIV Antrieb W. Reiner K.G. 2.2 KW (3 hp) Electrical control panel equipped with electronic frequency inverter and electrical temperature control panel. Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.

Description: Print volume: 980x1000x1000mm Print head: single Griffin extruder, 1.75 mm filament. Optional dual head (IDEX). Duet3D Wifi 32-bit controller & Duex5 expansion card 4 XZ axis motors are individually controlled for automatic bed tilt calibration. 100 touch points for automatic bed levelling Minimum electrical requirements - single phase, 208-240 V : North American customers: NEMA L6-30P 30A socket EU/AU/UK customers: IEC 309 32A blue (2P+T) socket Information given for guidance only Print size (W x D x H): 980 x 1,000 x 1,000 mm, Electrical connection: 240 V, Approx. Onsite Dimension. (l x w x h): 2,630 x 1,060 x 1,573 mm, weight approx.: 210 kg

SCHUKO ZM 900-2 chipper for wood chips for pellets and briquettes – German production – year of production 2002 TECHNICAL PARAMETERS: filling dimension 600 x 800 mm rotor diameter 200 mm rotor width 700 mm total power 18.5 kW number of knives 26 20 mm sieve autoreverse hydraulic drawer height 170 mm spigot diameter 200 mm dimensions (length/width/height) 200 / 130 / 170 cm weight 1200 kg

PET Sheet Extrusion Line Composed of: - Extruder 1 screw, brand: Union, 120 mm, motor: 185 KW (250 hp) double desasifier, year: 2002. - Continuous flow gear pump. - Self-cleaning hydraulic filter changer, brand: Erema, model: SW4/170 RTF. - New replacement spindle. - Head: 1400 mm, brand: EDI. - Calender: 1600 mm wide with 450x600-500 rollers. - 500 mm replacement cylinder - Silicone bath, year: 2017. -Winders. - Working width: 1200 mm. - Thicknesses: 0.2 to 1.2 - Production: 500 Kg/h. - Co-extruder 1 spindle, 80 mm, brand: PTI. -Dehumidifier, brand: Piovan, model: DP-620, year: 2022.

We are selling a Stratasys F370 on behalf of a customer. Maintenance contract was active until 04/2023. The machine is in very good working condition and comes with many accessories., Stratasys F370 Accessories:, - 9 Build Trays, - 1 role QSR Support, - 1 roll ABS black, - 8 printheads (2 installed), - 4x lye powder for washing out the support material, - last electrical safety test in 10/2023, network connection: LAN (Ethernet), WiFi, software: GrabCad Print (Download), Insight Software License, Installation space (x,y,z): 355 x 254 x 355, operating system: Windows 7, Windows 8, Windows 8.1, Windows 10 (64 bit only), Windows 11 at least 4 GB RAM, building material: ABS-CF10, ABS-ESD7™, ABS-M30, ASA, Diran™ 410MF07, PC-ABS, PLA, QSR Support, TPU-92A, Printing features: Replaceable extruder, heated build chamber, closed build space, two extruders (model & support), printing tech ...

accuhead machine for containers up to 40 ltr. Extruder 90/24D. accuhead 6 ltr. Clamping force 350 kN. Cables partially renewed. Oil tank and pipes cleaned. New control system is prepared (B&R) and can be installed at short notice

Description: Industrial planetary gearbox and drive shaft for tunneling machines. Features: 1 Gearbox (833101030, 1472270) 1 Gear Unit (B: 1472322, CH: 39959) Explosion-proof Planetary gearbox with integrated, bearing-mounted output pinion 300kW to 400kW 280 kNm Max Output Torque 345 kNm Max Static Output Torque Typical application areas: Sugar mills Stacker reclaimers Bucket wheel excavators Mining excavators Roller presses Extruders Approx. Onsite Dimension. (l x w x h): 2,000 x 800 x 850 mm, weight approx.: 1,210 kg

Description: The EB-350-50 waste briquetting extruder is designed to produce briquettes with an octahedral cross-section size of 53 x 53 mm with a central hole. , The raw materials are sawdust, as well as buckwheat hulls, sunflower, rice. Parameter unit rev. value (extruder performance, up to depends on the type of raw material and its preparation) kg h 350 bulk density of the original raw material not less than 120 kg/m3 feed humidity 4-8 % feed fraction 2-8 mm briquette density not less than 1000 Kg/m3 process temperature • K ( C) 423-623 raw materials in the pressing area (150-350) installed power no more, inclusive. kW 46.4 kW electric motor of the main engine kW 37 electric motor feeder 2.2 kW electric heaters 7.2 kW electricity consumption for one hour of extruder, no more than 38 kWh specific consumption of 0.11 kWh electricity no more than global dimensions, n ...

The most cost effective solution for extruders up to 3.000 kg/h., Very compact shape, less metal to heat up., High resistance to pressures line (up to 350 bar)., Minimum material waste due to the continuous cotamination removal., Adjustable speed of the discharge screw allows the finest handling. Continuous cleaning allows to use filters longer than traditional technologies., Pressure is kept constant all the time for a more even process, Easy maintenance: filter replacement easier and faster, without removing machine’s components. Also available with an automatic opening system that makes opening and closing lid’s operations easier, faster and safer., Double screening system : 2 x Ø 370 mm., With laser screens (from 60 to 350 µm), punched screens (from 400 to 2000 µm),, metallic mesh screens (from 230 to 10 mesh)., Bespoke screens available since they are produced in-house., Lase ...

P404 - used approx. 50 m³ / 50,000 L polyester silo, GRP silo, with undercarriage. Technical details: Capacity: approx. 50 m³ / 50,000 litres Material: Polyester / GRP silo Manufacturer: Reich Tank Year of construction: 2.000 Specific gravity: min. 1.2 kg/L Test mark: Z-10.2-163, DIBT is supplied. Dimensions: approx. Ø 3.00 m × H total 12.00 m / frame approx. W 3.00 m × D 3.30 m × H 3.00 m Miscellaneous: Used polyester silo in good condition, former salt silo. Standing silo made of GRP, dome on top of the roof, several inlets and outlets. Incl. load-bearing steel construction / undercarriage. Cleaned inside and out, roof repainted. The silo is sold, as you can see in the pictures. Attachments such as pipes, fittings and accessories are not included in the purchase price. We leave the parts at the silo, but during transport and dismantling, something can break in the ...