We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
120,916 used machines on RESALE, but how to find them? Machine Search
used
KPM-400 model peeler: Working quickly and accurately with minimum waste, these three basic features are incorporated in our knife potato peeler KPM-400, the peeler that allows you to finely peel your potatoes in only two minutes. The special design of the peeling blades and baffles ensures a uniform distribution of the peeling action over the entire surface of the product, resulting in less waste. Skins are instantly disposed of by a water jet and collected in a filter to prevent floor drain from jamming. At the end of work, the peeling disc and filter are easily removed and cleaned for improved hygiene: an important aspect which, combined with fast operation and reliability makes KPM-400 and indispensable peeling unit for modern food processing. General Features: Bwhz3x0q • It is easy to discharge potato peel because it is discharged through a designated chute • Peeled ...
used
Peeling set, consisting of: - Raft with elevator For semi-floating product reception and subsequent elevation. - INOX steel hopper, polypropylene mesh elevator with A-250 buckets and INOX recirculation pump. - Lung hopper for peeler For accumulation of product in the load of the peeler by abrasion, it has level detectors and general construction in AISI-304 Stainless Steel - Abrasive peeler - Vertical peeler, suitable for fresh or scalded products, using drum abrasives. Load capacity: 25kg Documentation available
used
KPM-400 model peeler: Working quickly and accurately with minimum waste, these three basic features are incorporated in our knife potato peeler KPM-400, the peeler that allows you to finely peel your potatoes in only two minutes. The special design of the peeling blades and baffles ensures a uniform distribution of the peeling action over the entire surface of the product, resulting in less waste. Skins are instantly disposed of by a water jet and collected in a filter to prevent floor drain from jamming. At the end of work, the peeling disc and filter are easily removed and cleaned for improved hygiene: an important aspect which, combined with fast operation and reliability makes KPM-400 and indispensable peeling unit for modern food processing. General Features: • It is easy to discharge potato peel because it is discharged through designated chute • Peeled potatoes ca ...
used
Onion peeling machine from the Dutch company DOFRA. For sale two such machines. - The efficiency of one machine is from 50 to 70 onions per minute, which gives an average of about 360 kg of peeled onions per hour (i.e. 60 pcs x 0,1 kg= 6 kg/min x 60min=360 kg/h). This efficiency is tested and confirmed (with one person stacking and one person controlling the final peeling stage). -has a hopper - belt with takers - the onion is taken from the charging basket, from which it is transported by a belt conveyor to the peeling section. - The cutting mechanism of the peeler also cuts the outer scales of the onion for easy removal. The depth of the incision can be adjusted to peel one or more scales. From the peeling section, the onions go to the rotary grippers, which, with the help of an air stream and with the help of the rotary motion of the grippers, get rid of the onion husks. - ...
used
For sale ABL apple peelers 3 pieces - 4 heads, 1 piece - 3 heads. One of the machines has been renovated. After the renovation, she worked for a year. After connecting and installing new knives, the machine is able to continue working. The remaining 3 pieces are incomplete, while the three head is almost complete, but requires renovation. There are lots of parts for them.
new
Puller Cloths 3880x560mm NEW ( 4 pieces )Puller dimensions : W: 3880mm D: 560mm7 holesWe have different size Puller Cloths in stockDetails see picture
new
Puller Cloths 3900x560mm NEW( 4 pieces )Puller dimensions: W: 3900mm D: 560mmDo we have different size Puller Cloths in stockDetails see picture
used
Description: Working size 20 - 100/105 mm - General conditions: the peeling head has been completely overhauled / according to the attached images, the system has been completely checked/cleaned. The plant has been completely checked/cleaned / the entry rollers are present but need to be checked/adjusted accordingly / the roller table in the exit area needs to be replaced. - Important note: the plant is equipped with a chip transport system. PLANT DISMANTLED WITHOUT DOCUMENTS For transport, the following are required: 4 hydraulic jacks weight approx.: 18,000 kg, Approx. Onsite Dimension. (l x w x h): 15,000 x 6,000 x 3,000 mm
used
working area:10700 mm Tube length:300-11000 mm min. workpiece diameter:80 mm max. workpiece diameter:260 mm Power:120 KW dimensions:21,5 x 5 x 3,8 m mm weight:90.000 kg pre-turn capacity:200 cdm/min Description of the system Manufacturer / Type Vario 1200-11000 Year of manufacture 1999 Intended use peeling machine for pipes and solid material with ultrasonic measuring system for detection of wall thickness deviations and correction of the same. Machine control SIEMENS 840 D - 6 axes Max. speed on the scraper/peeling device: n = 200 min-1
used
Carrier 30RB0402–0379-PEE chiller – with a cooling capacity of 400 kW | ChillerTech - Used chillers available from stock! Comprehensive services in the selection of cooling technology, allowing us to maintain the highest standards and optimize the system for the individual needs of our customers. Innovative and easy-to-use cooling systems based on chilled water, enabling our customers to save nearly 45% per year. At the same time, the constantly expanding assortment of nearly 68 chillers available immediately allows us to make a professional selection in terms of cooling capacity, dimensions or type of components used in the device. Access to fully new as well as used chillers in the capacity range from 1 kW to 1.2 MW. High-performance, compact and, most importantly, completely safe devices in the field of cooling as well as stabilization of various technological processes. Tak ...
used
Force of pressure: 40 t projection: 250 mm table size: 440 x 530 mm Durchfalloch in the table: 170 Ø mm table adjustment: 220 mm plunger surface: 200 x 280 mm slide adjustment: 60 mm stroke adjustment: 8-80 mm stroke rate: 100 / min drive motor: 380 V, 2.5 kW space: 950 x 1450 x 2050 mm weight: 2400 kg
used
Collman Buffing / Building / Peeling Machine Ref: RB007 Year 1980’s 50 volts 50 cycles 20kw Manual peeling, buffing, building Good for PCR truck and Light OTR tyres Latest standards
used
properties: Used pallet roller conveyor Condition: Top condition with slight signs of use Material: Steel (galvanized) Specialist dismantled and packaged 22.5 meters in stock Price per meter Technical Data Dimensions of pallet roller conveyor approx. Total length: 22,500 mm The system consists of 10 segments 9 segments: 2.160mm 1 segment: 2.880mm Total width: 880 mm Roll width/conveyor width: 825mm Axle distance: 60 mm Roller cross-section: 50 mm Material: steel, galvanized Drive type: Flat belt Height frame: 95 mm Wide frame: 25mm pallet roller conveyor Due to the excellent workmanship of the pallet roller conveyor, your material glides gently to the destination, even under heavy loads. Tailor-made tickets for your intralogistics We are your competent contact for roller conveyors, belt conveyors, inclined conveyors or telescopes for lo ...
new
pressure: 55 t throat: 250 mm stroke: 10-90 mm table-size: 640 x 495 mm no. of strokes: 120 Hub/min ram adjustment: 55 mm ram surface: 290 x 210 mm ram hole: 40 H7 mm hole in the table: 220 x 190 mm T-slots: 22 clamping plate: 620 x 485 x 65 mm total power requirement: 4,5 kW weight of the machine ca.: 3,4 t dimensions of the machine ca.: 1,5 x 1,2 x 2,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
pressure: 25 t throat: 200 mm stroke: 4 - 80 mm table surface area: 520 x 400 mm no. of strokes: 160 Hub/min ram surface: 160 x 160 mm ram adjustment: 40 mm ram hole: 32 H7 mm hole in the table: 200 x 150 mm clamping plate: 500 x 380 x 60 mm total power requirement: 2,7 kW weight of the machine ca.: 1,9 t dimensions of the machine ca.: 1,3 x 1,0 x 1,85 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 55 t throat: 250 mm stroke: 10-90 mm table-size: 640 x 495 mm no. of strokes: 120 Hub/min ram adjustment: 55 mm ram surface: 290 x 210 mm ram hole: 40 H7 mm hole in the table: 220 x 190 mm T-slots: 22 clamping plate: 620 x 485 x 65 mm total power requirement: 4,5 kW weight of the machine ca.: 3,4 t dimensions of the machine ca.: 1,5 x 1,2 x 2,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 40 t throat: 225 mm stroke: 8 - 84 mm table surface area: 580 x 450 mm ram adjustment: 55 mm no. of strokes: 130 Hub/min ram surface: 185 x 180 mm ram hole: 40 mm hole in the table: 210 x 450 mm clamping plate: 570 x 450 mm total power requirement: 3,5 kW weight of the machine ca.: 2,7 t dimensions of the machine ca.: 1,4 x 1,1 x 2,1 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
pressure: 25 t throat: 200 mm stroke: 4 - 80 mm table-size: 520 x 400 mm no. of strokes: 160 Hub/min work capacity during endurance run: 1370 Nm force: 2740 Einzelhub adjustment of stroke: 4 - 80 mm ram adjustment: 40 mm ram surface: 160 x 160 mm hole in the table: 200 x 150 mm clamping plate: 500 x 380 x 60 mm hole in the table: 80 mm weight of the machine ca.: 1,9 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
pressure: 40 t throat: 225 mm stroke: 8-84 mm Table dimensions: 580 x 450 mm ram adjustment: 55 mm no. of strokes: 130 Hub/min ram surface: 185 x 180 mm ram hole: 40 H7 mm hole in the table: 210 x 170 mm T-slots: 22 clamping plate: 570 x 450 x 65 mm total power requirement: 3,5 kW weight of the machine ca.: 2,7 t dimensions of the machine ca.: 1,4 x 1,1 x 2,1 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 25 t throat: 200 mm stroke: 4 - 80 mm table surface area: 520 x 400 mm no. of strokes: 160 Hub/min force: Dauerlauf 1765 J dayligth: 302 max mm dayligth: 100 min mm adjustment of stroke: 8-84 mm ram adjustment: 55 mm ram surface: 185 x 180 mm ram hole: 40 H7 mm force: 3530 J hole in the table: 210 x 170 mm width of T-slots: 22 mm connected load: 3,5 kW rated current: 9 frequency: 50 Hz voltage: 380 V weight of the machine ca.: 2700 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
pressure: 40 t throat: 225 mm stroke: 8-84 mm Table dimensions: 580 x 450 mm ram adjustment: 55 mm no. of strokes: 130 Hub/min ram surface: 185 x 180 mm ram hole: 40 H7 mm hole in the table: 210 x 170 mm T-slots: 22 clamping plate: 570 x 450 x 65 mm total power requirement: 3,5 kW weight of the machine ca.: 2,7 t dimensions of the machine ca.: 1,4 x 1,1 x 2,1 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 63 t throat: 235 mm stroke: 6 - 100 mm no. of strokes: 60 Hub/min dayligth: 270 mm distance table - lower edge of ram: 370 mm ram adjustment: 80 mm table-size: 650 x 600 mm ram head dimension: 180 x 230 mm work height max.: 700 mm table hole: 110 mm total power requirement: 4,0 kW weight of the machine ca.: 3,5 t dimensions of the machine ca.: m This eccentric press machine with 80 ton capacity is suitable to carry out tasks involving deep-drawing, cutting, punching and stamping. Our Profi Press mechanical presses can be used for various applications in many different industries: the automotive, railway and aerospace industries (for example) and many more related industries that use metal forming. Made of S355JR steel and equipped with a 4 guided ram. The rod is made out of high-strength forged steel and high-performance alloy bushings. This high performance Profi Press feature ...
used
Pressing force: 12.5t, stroke: 8-60mm, stroke speed: 140/min, connected load: 1kW, weight: 1.1t.
used
Pressing force: 2500kN, throat depth: 450mm, ram stroke: 40-160mm, weight: 16,2t, including documentation.
used
Cato PTF Peeler in reconditioned Condition
used
pressure: 400 t throat: 400 mm stroke: 40 - 140 mm number of strokes - idle run: 32 min-1 ram adjustment: 125 mm table surface area: 1250 x 750 mm dayligth: min/max 450/590 mm total power requirement: 31,5 kW weight of the machine ca.: 23 t Overall size: 3,7 x 1,7 x 3,9 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
fully automatic peeling machine with integrated suction Material made of high quality plastic & stainless steel Working without steam easy to use no fixed location individual product customization of caliber 12mm - 40mm from 4cm length Detection sensor for detecting the products Waste bin easy disassembly for cleaning without tools Product flow up to 352m/min (depending on the product) vacuum -180mbar; 370m3/h 0-2100 rpm motor speed Machine weight 230kg 1338x677x1371mm total size (LengthxWidthxHeight)
used
pressure: t throat: mm stroke: mm total power requirement: 23 kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
pressure: 55 t throat: 250 mm stroke: 10-90 mm table-size: 640 x 495 mm no. of strokes: 120 Hub/min ram adjustment: 55 mm ram surface: 195 x 210 mm ram hole: 40 H7 mm hole in the table: 250 x 190 mm T-slots: 22 clamping plate: 620 x 485 x 65 mm total power requirement: 4,5 kW weight of the machine ca.: 3,4 t dimensions of the machine ca.: 1,5 x 1,2 x 2,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
General SKU018C045 LocationBarneveld MakeKomen + Kuin / Florigo TypeSteam Peeler Year of construction1988 Pressure Working pressure16 Bar Main Features MaterialMild steel Volume60 Ltr. Motor0.55 KW Specified Features - Miscellaneous MaterialMild steel Capacity± 60 ltr Motor0,55 KW, 220/380 Volt Capacity100 KG/Hr Information Mach.No.13563 Floor space2,1 x 0,7 M Total height2,8 M Weight1050 KG Extra SpecificationsDimensions (LxWxH) 2,1 x 0,7 x 2,8 Mtr, Weight 1050 KG MiscellaneousKomen + KuinMiscellaneous > MiscellaneousBrand > Komen + Kuin What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
used
Knife vegetable peeler carrot parsley cucumber. Carrot machine not for asparagus is very different. Carrots dont peel well on asparagus. Capacity 300 - 500 kg per hour Attention, a machine with a belt feeding the product to the knives - significantly improves and increases the efficiency of peeling. Machine without photocells and sensors, etc. simple, easy to clean and operate. Catalog and parts available. Completely different quality on the nose than on corundum
used
Description: Pressure capacity 160000 kg, projection 400 mm, tappet stroke 20 to 160 mm, tappet adjustment 120 mm, table surface 1200 x 800 mm, for further details see photos weight approx.: 18,000 kg, Approx. Onsite Dimension. (l x w x h): 2,500 x 1,900 x 3,500 mm
used
pressure:250 t throat:450 mm stroke:36 - 126 mm no. of strokes:40 /min distance table/ram, max. stroke up, adjustment up:525 mm table surface area:1000 x 750 mm hole in the table:400 x 360 mm table height over floor:1000 mm ram surface:600 x 500 mm ram adjustment:111 mm power requirement:19,0 kW weight:13,5 t Dimensions (WxDxH):1,3 x 3,2 x 3,35 m clutch:pneumatic overload protection in ram:mechanical ram adjustment:motoric
used
Blue Box chiller KAPPA V ECHOS /FC /ST 2PS /LN chiller with cooling capacity 530 kW | ChillerTech - Used chillers Carrier 30RB0402–0379-PEE chiller – with a cooling capacity of 400 kW | ChillerTech - Used chillers available from stock! Basic information: -Manufacturer: BlueBox -Model: KAPPA V ECHOS /FC /ST 2PS /LN -Cooling capacity: 530 kW at 12/7 oC at 35 oC outside -The refrigerant used, as well as its quantity: R407C / circuit A – 116.0 kg / circuit B – 116.0 kg -Number of refrigeration circuits: 2 refrigeration circuits -Year of production: 2007 -Connection pipes: flanged -> input: DN160 | output: DN125 -Operating range: -10 oC to 45 oC -Number and type of compressors: 2 pcs. screw compressor with infinitely variable rotary control -Additional information: free cooling for up to 68% lower energy consumption and hydraulic module (buffer tank and water pump) - ...
used
Thread rolling tool, threaded roller set, thread rollers, thread rollers Manufacturer: IKON Thread designation: M14, Right Roller outer diameter: 166 mm Roll width: 160 mm Bore diameter: 70 mm Suitable for spindle diameter: 69.85 mm Reground good condition We have over 100 different rolling tools from different manufacturers in stock: PROFIROLL, PEE-WEE, IKON , EMUGE, MAPAL, GROB, GEMA, HSV and others suitable for thread rolling machine, cold rolling machine, thread rolling machine, profile rolling machine manufacturer PEEWEE, Profiroll, SENY, GROB, Wanderer etc.; used
used
3 Rexroth cylinders, type: ICL-DA-050-0200-PC-MD-PUR-PEE, dimensions: (3x) 390 mm x 70 mm x 70 mm.
used
Fully automatic conveyor belt made of stainless steel including water supply and height adjustment function Manufacturer: Solia Material: 1.4301 (V2A) Dimensions: Length: 3.80 m Width: 1.20 m Frame height: 80 cm Height with funnel: 1.20 m The conveyor belt was originally mounted on a potato peeling machine. It has several tracks to sort the potatoes. However, it is suitable for almost all types of bulk materials. Furthermore it has a funnel through which enters the bulk material on the band. However you can easily disassemble the frame where the funnel and the tracks are welded on.You can easily loose the frame with the help of the star head screw. The conveyor belt was hardly used and is very high quality! Therefore in a very good condition!
used
The company Centrimax - Winkelhorst Trenntechnik GmbH is specialized for over 30 years on the delivery of used centrifuges, like decanter centrifuges, disc stack centrifuges, peeler centrifuges, pusher centrifuges, worm screen centrifuges etc., of the makes GEA Westfalia Separator, Alfa Laval, Flottweg, Siebtechnik etc. The centrifuges are delivered by us fully reconditioned and with warranty. Our stock includes several hundreds of centrifuges for the clarification and the separation of suspension and liquid mixtures, as well as for the thickening and concentration of sludges. Ask us if you search consultation in the solution of problems in the area of the centrifugal separation technology. Buy from the specialist!
used
The cable granulating system RMH 1 d grinds cable with different dimensions (for example household installation cable, industrial cable) and then separates the metal and plastic fraction on the dry cutting table. The material between a high-speed rotor blades and the blades of the stator is open-minded when the cable in the granulator. Is at the same time the cable is crushed and peeled off the plastic coating or plastic coating. Â When the separation on the dry cutting table, the ground copper-plastic mixing group is applied evenly on the inclined work screen. The vibration of the work screen and the smooth air flow enables the mixed fraction into a flowing State. This fall the specifically heavier particles (copper) on the sieve and the specific smaller particles (plastic) swimming. The heavier particles (copper) are promoted through the support movement of the work screen slowly ...
used
The cable granulating system RMH 2D grinds cable with different dimensions (for example household installation cable, industrial cable) and then separates the metal and plastic fraction on the dry cutting table. The material between a high-speed rotor blades and the blades of the stator is open-minded when the cable in the granulator. Is at the same time the cable is crushed and peeled off the plastic coating or plastic coating. Â When the separation on the dry cutting table, the ground copper-plastic mixing group is applied evenly on the inclined work screen. The vibration of the work screen and the smooth air flow enables the mixed fraction into a flowing State. This fall the specifically heavier particles (copper) on the sieve and the specific smaller particles (plastic) swimming. The heavier particles (copper) are promoted through the support movement of the work screen slowly ...
used
Horizontal peeling centrifuge Peony PPCS-555 used for solid-liquid separation in chemical, pharmaceutical &food industry. Horizontal peeling joints are discontinuous filtration centrifuges that are characterized by absolute reliability, even with the highest requirements. They are used in the production of mass, raw material and fine chemicals as well as in the food industry. Manufacturer: Peony Type: PPCS-555 Year: 2013 Drum diameter: 1250 mm Volume: 370 liters Capacity: 555 kg Total 3 pieces available - Horizontal shaft trifuge with perforated filter drum. - Hydraulically actuated wide knife peeling device. - Solid discharge in one of the centrifuges with schurre, in the other two with discharge screw. - Drive via V-belt. - Application discontinuously in batch operation for mechanical solid-liquid separation. - High separation and washing effect, low residual moistu ...
used
Table machine RMH 52 for peeling cables. 18 meters per minute, 230 V Diameter of cable: 1-52 mm
used
Table machine RMH 65 for peeling cables. 18 meters per minute and 230 V 25 meters per minute and 400 V diameter of cable: 1-65 mm
used
Table machine RMH 65 Q for peeling cables. 18 meters per minute, 230 V with anti-crushing device 25 meters per minute and 400 V with anti-crushing device Diameter of cable: 1-65 mm
used
Orange juicer CITROCASA 8000 SB-ATS Advance The 8000 SB ATS (Automatic Transport System) sets completely new standards in terms of ease of use and automation. The ideal solution in the highly frequented self-service area. The automatic transport system keeps the juice zone free of any peels, kernel or pulp residues Start of the pressing process by pressing the tap High capacity of the fruit storage basket (21 kg) Stainless steel design of all important components Digital counter of the total pressed oranges purest orange juice through sCs up & down cutting system Easy cleaning thanks to Double Cover and Cross Holder Machine stops automatically when the shell container is full Capacity: 40 oranges per minute Dimensions machine: H180 x W100 x D65 cm Dimensions storage trolley: H100 x W52 x D53 cm Machine & wagon can be driven on deflection ro ...
used
Table machine RMH 85 Q to peel by cable. 18 meters per minute, 230 V with anti-crushing device 25 meters per minute and 400 V with anti-crushing device Diameter of cable: 1-85 mm
used
Collman Building Machine Ref: RB003 For tyres up to 2.5m and 1m wide With hydraulic cutting unit Can use for smooth and groove Buffing arm can be supplied but will need to be rebuilt with spare motor before being able to use as a Buffer Fully operational Peel, Buff (with arm), Build, Cut Hydraulic motor you can use to cut through cured tyres (very strong arm) Modern Panel
used
– Thermoforming and Sealing Machine – GEA POWERPACK NT 76750101 – Year 2014 The GEA PowerPak thermoforming machine is specially adapted to different applications (vacuum, MAP, shrink, topform, skin, zipper, medical and technical packaging). Conversion to other packaging is easy and format changeover is quick and takes place in a few simple steps. To adapt this equipment to your needs, the Powerpak Thermoformer-Sealer can easily be completed with various integrated upstream and downstream components. A powerful conveyor chain securely grips the lower web of the feed drum. A precision servo motor indexes the web throughout the machine process. The length of the index is programmable on the HMI and stored as a recipe parameter. The loading area is accessible from both sides for several operators. Powerful GEA membrane sealing system for reliable seals and constant pe ...
new
Heavy peeling machine from also for thick cables up to approx. 110 mm diameter. Cable stripping machine for PVC and lightly reinforced cables. Easy adjustment of the knives by handwheel. Cables are cut from both sides at the same time, so that the remittation drops slightly. Knife individually adjustable by spindle for different strength swelling. Double spindle for precise adjustment of the cable thickness. Two separate 1.5 kW motors for a lot of power when pulling through the cables
used
Punching machine Trumpf TruMatic TC3000-1300 FMC Year of construction 2004 87500 hours (03.2021) In this case, the configuration : TruMatic TC3000-1300 FMC Year of construction 2004 Working range : 2550 x 1280 mm Standard: • Sturdy C-frame • Coordinate guidance with integrated linear magazine, 21 seats for tools and clamps • 2 clamps • Drives: Maintenance-free digital three-phase servo motors • Punching head: hydraulic system with closed control loop, hydraulic mono tool holder, 360° rotation for all Tools, automatic tool length compensation, programmable scraper movement • Programmable hold-down • Tool spray lubrication • Punch butt suction • Partial slide 500 x 500 mm • Control Bosch PNC-P, activity-oriented user interface, Online Help, Diagnostics, 3.5" Floppy Drive, RJ45 Network Connection • Graphics programming ToPs 2000 • ToP ...