ped machine used for sale

Profile steel shear, profile shear, punch, punching machine, hole punch -Pressure force: 40 tons -Punching -scissors -cut -disengage -mechanical release -Foot switch: 1 -various stamps and dies -Dimensions: 800/1250/H1800 mm -Weight: 1112 kg

Control unit, control panel, operating panel, control unit, foot switch, safety foot switch -Foot switch: Safety foot switch from Promecam STPC 250 40 121 press brake -Metal housing: with protective cover -Overall dimensions: 380/180/H165 mm -Weight: 6.7 kg

Foot switch, safety foot switch, foot pedal, foot controller, foot remote control, pedal controller, pedal switch -Manufacturer: SSUPOU, Foot switch type F1-U1 UN -Connector: 3-pin -Dimensions: 220/177/H141.5 mm -Weight: 2.5 kg

Vise, bench vise, locksmith vise, parallel vise, heavy-duty vise -Parallel vise: jaw width 150 x 30 mm -Wingspan: 190 mm -Quantity: 1 available -Dimensions: 485/210/H190 mm -Weight: 26 kg

Punch holder, die holder, notching tool, punching tool, punch, punching die, punching stamp, for eccentric press, hydraulic press -Punching tool: slot 10 x 26 mm -Punching dimensions: see photo with dimensions -Hole: Ø 40 mm -Dimensions: 400/90/H205mm -Weight: 7.5kg

Punch holder, die holder, notching tool, punching tool, punch, punching die, punching stamp, for eccentric press, hydraulic press -Punching tool: Long hole type S27-40 -Hole: Ø 40 mm -Dimensions: 300/150/H250 mm -Weight: 12.4 kg

Punch, punching machine, hole punch, eccentric punch -Manufacturer: Peddinghaus, hole punch -Type: 225B/45 -Pressure force: 45 tons. -Punching capacity: see photo of nameplate -Projection: 360 mm Accessories: incl. punching tool and 2nd table (see photos) -Dimensions: 1540/700/H1510 mm -Weight: 1410 kg

Punching tool, punch, scraper, hold-down device -Scraper: hold-down device for punching -Holder: Ø16 x 210 mm -Dimensions: 265/100/H95 mm -Weight: 3.1 kg

Punching tool, punch, scraper, hold-down device -Scraper: hold-down device for punching -Holder: Ø17 x 210 mm -Dimensions: 265/100/H90 mm -Weight: 2.9 kg

Punching tool, punch, scraper, hold-down device -Scraper: hold-down device for punching -Holder: Ø22/25 x 215 mm -Dimensions: 315/65/H85 mm -Weight: 1.9 kg

Punching tool, punch, scraper, hold-down device -Handover: in current condition as seen -Bracket: Damage see photos -Scraper: hold-down device for punching -Receptacle: Ø26/22 x 210 mm -Dimensions: 315/125/H95 mm -Weight: 4.2 kg

Separating tool, punching tool, punch, punching die, punching die, gill forming tool -Manufacturer: Peddinghaus, punching tool for: holding matrices -Bore diameter: 70 mm -Dimensions: 220/320/H115 mm -Weight: 32 kg

Separating tool, punching tool, punch, punching die, punching die, gill forming tool -Manufacturer: Peddinghaus, punching tool scraper -Holes: Ø 13 mm -Threaded hole: M15 -Dimensions: 150/100/55 mm -Weight: 1.8 kg

bench vice, metalworker & vice, parallel vice -Jaw width: 135 mm -Wingspan: 215 mm -Number: 3x vices available -Price: per piece -Dimensions: 440/200/H490 mm -Weight: 26 kg

hydraulic pump, oil pump, hydraulic unit, hydraulic pump, hydraulic pump, tandem pump -Manufacturer: Pedro Roquet, Double hydraulic pump -Type: 1LS9 3DJ23FR 1L03DB24R -Shaft: conical Ø 14-17 mm -Flange: Ø 80 mm -Quantity: 1x pump available -Dimensions: 210/155/H120 mm -Weight: 5.2 kg

Punch holder, die holder, notching tool, punching tool, punch, punch die, punching die, for eccentric press, hydraulic press -Stamp holder: with slotted punch tool, without die -Socket: Ø 51 mm / Bolt circle Ø 110x18 mm see photos -Punch tool: Slotted hole 22.5x50 -Dimensions: Ø 135 x 180 mm -Weight: 6.7 kg

Separating tool, punching tool, punch, punch die, punch stamp, gill forming tool -Manufacturer: Peddinghaus, die-cutting tool for holding dies -Type: unfortunately without a type designation -Dimensions: see photos -Dimensions: 350/340/H245 mm -Weight: 58.5 kg

Separating tool, punching tool, punch, punch die, punch stamp, gill forming tool -Manufacturer: Peddinghaus, die-cutting tool for holding dies -Type: SM078 5905 -Mounting: Hole spacing 170 mm / M16 -Dimensions: see photos -Dimensions: 200/65/H130 mm -Weight: 8.4 kg

Separating tool, punching tool, punch, punching die, punching punch, gill forming tool -Punching tool for: holding matrices -Bore diameter: 70 mm -Dimensions: 220/317/H115 mm -Weight: 32 kg

round bar steel: 50 mm square edge steel: 40 x 40 mm L-beam: 140 x 13 mm Punch power: 900 kN hole punching press: throat: 510 mm hole punching press: max. length of stroke: 29 mm hole punching press: capacity (dia. x thick.): 31 x 20 mm notching: l + T material: 80 x 14 mm no. of strokes: 40 / 45 Hub/min total power requirement: 4 kW weight of the machine ca.: 3,7 t dimensions: 2,1 x 0,7 x 2,12 m Accessories: various punches and dies The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hand lever plate shears and profile steel shears Knife length 400mm Cuts sheets up to 5mm Cuts round steel up to 13mm Heavy and stable design with foldable storage table. Mounted on base More hand lever plate shears in stock, also for round steel and profiles!

Keeldiepte: 405 mm slag: 21 mm 55 slagen per minuut Punching pressure: 45 ton Max punching dia: Ø 27 in 13 mm / Ø 39 in 9 mm Power needed: 2,2 kW Length: 1300 mm Depth: 800 mm Height: 2050 mm Weight: 1000 kg

Die holder, separating tool, punching tool, punch, punch die, punch stamp, gill forming tool, die holder -Stamping tool: die holder -Hole: Ø 45 mm -Bore: Ø 33 mm -Hole spacing: 180 x Ø20 mm -Dimensions: 240/85/H120 mm -Weight: 7.3 kg

Punch holder, die holder, notching tool, punching tool, punch, punch die, punching die, for eccentric press, hydraulic press, quick-change punch holder -Stamp holder: Stamp holder -Hole: Ø 30 mm -Hole spacing: 94x63 mm / Ø13 mm, see photos -Dimensions: 120/90/H135 mm -Weight: 4.2 kg

: 5 weight: 5 t : . The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

round bar steel: 25 mm square edge steel: 22 mm L-beam: 70 x 7 mm cutting capacity: 100 x 10 mm plate thickness: 10 mm total power requirement: 1,3 kW weight of the machine ca.: 0,6 t dimensions of the machine ca.: 1,1 x 0,65 x 1,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 350 mm, 45 °

For sale is a professional metal cold circular saw / Miter Saw from the quality brand Pedrazzoli (type Super Brown 350/60 SA, built in 1999). Perfect for locksmithing, steel construction or tube processing. Technical data (according to nameplate & model): Manufacturer: Pedrazzoli IBP SpA (Italy) Model: SB 350/60 SA (Semi-Automatica) Year of Make: 1999 Saw blade diameter: max. 350 mm Mitre cuts: Swivelling saw head for angle cuts Equipment: Pneumatically controlled vice, pneumatic lowering cylinder for saw head, separate control panel with emergency stop & timer module as well as integrated coolant device / maintenance unit. Condition & Note: Solid base with base and drip tray. Normal signs of wear and aging from workshop use. Cabling/hoses should be professionally inspected/sorted before commissioning.

Large stock of punching material (dies/stamps), spare parts

Specifications: - Printing capacity 50 T - Outreach approx. 360 mm - Installation height approx. 240 mm - Drive 400 V / 7.5 kW - punches in ST 40 e.g. up to 25 mm Ø in 16 mm - up to 20 mm Ø in 19 mm - Space requirement approx. W 1000 x H 1900 x D 1000 mm - Weight approx. 1800 kg

Scissors for reinforcing steel or bars max 32mm

Punching force: 1000 kN Weight: 2400 kg For example, punches a 40 mm hole in 20 mm steel Stroke release via foot switch Includes viewfinder for graining and setup Assortment of tools is included in the price

plate thickness:4 mm blade length:180 mm weight of the machine ca.:21 kg dimensions of the machine ca.:400 x 100 x 1500 mm

circuit board, Sunnen ML3500 - ML5000 - ML2000, model PED 2202, in working condition, Contact us for info

Offer 22646 Hydraulic profile and bar steel shears with notching device and hole punch Specifications: - Flat steel scissors - Flat steel - 400 x 16 mm - or: 300 x 18 mm - Profile steel shears - L- and T-irons at 90° 130 x 12 mm - Square steel / round steel 40 / 40 mm - Notcheter - with square clinker for sheet metal up to approx. 13 mm - Latch depth approx. 70 mm - Latch width approx. 52 mm - Hole punch - Punching force approx. 60 t - Projection 400 mm - Stroke approx. 10 to 50 mm - perforated in steel up to Ø 31 in 15 mm - Material stop - div. 10 pcs punches + matrices - Drive 400 V / 5.5 kW - Dimensions W 1100 x H 2000 x D 1700 mm - Weight approx. 2100 kg

Max. punching capacity: 600 kN Max. shear power: 800 kN Punches 27 mm holes in 16 mm steel Shears on the flat steel shears to 400 mm up to material thickness of 16 mm steel Hydraulic hold-down device on flat steel shears Further technical data on request With an assortment of punches and dies as desired Weight: approx. 2,000 kg

Max. punching capacity: 600 kN Max. shear capacity: 1000 kN Punches 20 mm holes in 19 mm steel Shears on flat steel shears to 500 mm up to material thickness of 12 mm steel Further technical data on request With an assortment of stamps and dies as desired

Max. punching capacity: 600 kN Max. shear capacity: 800 kN Punches 27 mm holes in 16 mm steel Shears on the flat steel shear to 400 mm up to material thickness of 16 mm steel Hydraulic hold-down device on flat steel shear Large support table on the punching side with stops Further technical data on request With an assortment of stamps and dies as desired Weight: approx. 2,000 kg

1 piece of used, technically overhauled reinforcing steel shears. The scissors work electromechanically. The engine was remounted. V-belt renewed. Machine painted. Cut is triggered by means of a footswitch on the front. Max. cutting capacity: 1 piece 32mm. D. Reinforcing steel bars. Connected load: 3KW/400V/16A

Punching force: 500 kN For example, punches a 20 mm hole in 18 mm steel Stroke release via foot switch Range of tools is included in the price

Linear rail with folding cam Height-adjustable for mounting on hole punches

pressure: 100 t throat: 330 mm stroke: 10-130 mm no. of strokes: 56 Hub/min ram - range of adjustment: 80 mm table surface area: 830x600 mm ram surface: 250x130 mm table height: 870 mm tool hole in ram: 50 mm weight of the machine ca.: 11 t dimensions of the machine ca.: BxTxH 2100x1900x3000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hand lever shears Pagus 1 BR/6 Sheet thickness: 4 mm Knife length: 180 mm Dimensions: 400x100x1500 Year of construction 1995

Peddinghaus 960 cold saw and Peddinghaus TDK 1000/3 spindle beam drilling line 18M infeed and outfeed, 5M drag system infeed and outfeed, Hard stamper system, Fagor software operator system 1 Saw and drill and measuring system, nobody would buy these unless sold as one unit 2 Feed and transfer system 3 Hard stamper Find more here - .ucymachines/ Contact us at - sales@ucymachines

Offer 25086 Specifications: - Flat steel shears - Flat steel - 400 x 120 mm - or: 300 x 22 mm - Profile steel shears - L- and T-irons at 90° 150 x 12 mm - Square steel / round steel 40 / 40 mm - Notches - With square clinker for sheet metal up to approx. 13 mm - Latch depth approx. 70 mm - Latch width approx. 52 mm - Hole punch - Punching force approx. 100 t - Projection 510 mm - Stroke approx. 10 to 50 mm - Perforates in steel up to Ø 31 in 25 mm - E. contact stop - div. 10 pcs. punches + dies - Drive 400 V / 5.5 kW - Space required: W 1100 x H 2000 x D 1700 mm - Weight approx. 2100 kg

Overhauled: 1999 Shear force: 2000KN Cycle rate: 59/min Achievement; Round steel up to D 63 mm, square steel up to 55 mm Machine weight: 7350 kg Dimensions:2260 x 2920 x 1770 mm Hewvu Nev Ta Ucju Isk Bar feeder with separation: Max. pole length: 6m Dimensions: 6.3 x 1.75 x 2.25 m Weight: 4000 kg Machine is still energized.

Max. punching and shearing capacity: 400 kN For example, punches 20 mm holes in 15 mm steel Shears on the flat steel shear on 120 mm to 12 mm steel Further technical data on request With an assortment of stamps and dies as desired

round bar steel: 28 mm square edge steel: 25 mm L-beam: 80 x 8 mm notching cap. mild steel max.: 7 mm cutting capacity of the vertical shear: 350 kN Punch power: 190 kN shear: flat material: 100 x 11 mm shear: length of knifes: ca. 175 mm total power requirement: 1,5 kW weight of the machine ca.: 0,5 t dimensions of machine L x W x H: 1,0 x 0,5 x 1,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

nominal power: 63 t stroke rate in continuous stroke: 90 min force: 2200 Nm Torque: 12500 Nm Labour performance: 5,5 kW sheet thickness - max.: 6,3 / 3,2 mm cutting surface: 1600 mm² distance between columns: 320 mm throat: 315 mm min. ram stroke: 8 mm max. ram stroke: 120 mm ram adjustment: 70 mm ram surface: 400 x 500 mm tool hole in ram: 40 mm tool shank hole (depth x diameter): 92 mm T-slots: 2 Stk total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

hydraulic: ja : 100 t weight of the machine ca.: 2,9 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.