129,247 used machines on RESALE, but how to find them? Machine Search
electric motor, three-phase motor -Power: 0.37 kW -Speed: 1400 rpm -Shaft diameter: 14 mm -Brake -Design: B5 -Protection class: IP 54 -Weight: 11 kg
Manufacturer: Elumatec Type: MGS 72/30 Swivel range 0° - 45° infinitely adjustable to the left and right Resting points 15° - 30° - 45° Saw blade:: ø380mm Motor: 3 kW Speed: 2800 tpm Weight 120 kG Condition functionally tested
Offer 22408 Specifications: - max. working width 3050 mm - max. cutting capacity St 40 10 mm - Projection 270 mm -Cutting angle° - Cutting gap adjustment by hand - Number of hydraulic hold-downs 16 pcs - Mechanical backgauge 20 - 650 mm - Front angle stop + support arms - Stroke rate depending on cutting angle and cutting length 7 - 12 per/min - Hydraulic drive 400 V / 22 kW - Table height approx. 820 mm - Space requirements incl. back gauge, without front support arms -ca. W 3850 x H 2000 x D 2000 mm - Weight approx. 8500 kg - With: - E-foot switch - Cutting line illumination
Refer to code 1027 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.
Granulator Frewitt MGV 003 Ex protected version Material: Stainless steel Power 5 kW infinitely variable mechanical variator Very good condition, straight from production
geared motor electric motor -Speed: 30/50 rpm -Power: 0.22/0.9 kW -Design: B3 angle -Shaft diameter: Ø 38 mm -Protection class: IP 65 -Dimensions: 760/250/H400 mm -Weight: 65 kg
Refer to code 1033 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.
Specifications: Speed: 2800 1/min Saw blade: ø 380 mm Motor power: 3000 W Roller conveyor, approx.: 128 mm Weight, approx.: 200 kg Dimensions (WxDxH), approx.: 1760 x 800 x 1680 mm
One used complete SCHLATTER MG303 welding line for standard mesh. This line is suitable for the economic production of lightweight and medium standard mesh in medium batches. The line wires are drawn off by spools, The cross wires are straightened and cut to length. This allows the system to be quickly retooled to another mesh type.
Inv. Num. : 6634 Type: MGH 250 Produzent: MECTRON Erzeugt: 2010 Parametern: Steuerungssystem: SINUMERIK 840DSL Arbeitstischlänge: 400 mm Arbeitstischbreite: 300 mm Maximale Tischbelastung (gleichmäßig): 80 kg Maximale Vertikalspindeldrehzahl: 30000 1/min Minimaler Abstand zwischen der Spindel und dem Tisch: 100 mm Maximaler Abstand zwischen der Spindel und dem Tisch: 350 mm Verfahrwege X-Achse: 250 mm Verfahrwege Y-Achse: 250 mm Verfahrwege Z-Achse: 250 mm Maximale Vorschubgeschwindigkeit Achse X: 36 m/min Maximale Vorschubgeschwindigkeit Achse Y: 36 m/min Maximale Vorschubgeschwindigkeit Achse Z: 36 m/min Kegel: HSK E 25 Anzahl der Achsen: 3 Stücke Maschinenhöhe: 1070 mm Maschinenlänge: 1660 mm Maschinenbreite: 1800 mm Maschinengewicht: 1850 kg Ausstattung: Kühler OilMatic C750 Transformator
Universa 400 Standard Bj 2004 Compact 450 SO Bj 2005 MGZ 400 Hand Feeder Bj 2004 Immediately available from stock
Offer 24295 Specifications: - max. working width 3050 mm - max. cutting capacity St 40 16 mm - Projection 270 mm - Cutting angle 2.4 ° - Cutting gap adjustment by hand - Number of hydraulic hold-downs 16 pcs - Motor back gauge with positioning control 20 - 1000 mm - Front angle stop + support arms - Stroke rate depending on cutting angle and cutting length 7 - 18 rpm - Hydraulic drive 400 V / 30 kW - Table height approx. 820 mm - Space required including back gauge, without front support arms -ca. W 4000 x H 2400 x D 2400 mm - Weight approx. 14500 kg - with: - E-foot switch - Cutting Line Illumination - - Cutting Length Selection - Rear area protection with light barrier
Finger conveyor belt Kallfass MGZ 400; cleaned and tested; Length 2000mm; Width 400mm; suitable as a single belt or for connection to Kallfass machines; Inlet sensor. Nipper feeder Kallfass MGZ 400; cleaned and checked; lenght 2000mm; width 400mm; used for stand alone or to connect with Kallfass machines; Infeed Sensor.
feed pressure: . bar liter capacity: . l/min total power requirement: . kW weight of the machine ca.: . t dimensions of the machine ca.: . m Domestic water pump 60-300L The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 13000 mm, 4500 mm, 1000 mm
CNC gantry milling machine (for aluminum skin drilling/milling operations) MTorres MGP-51350-TT Year of construction 2003 Siemens Sinumerik 840D CNC Control Travel: X 13,000 mm - Portal longitudinal path Y 4,500 mm - Crossbeam path of the milling support Z 1,000 mm – Milling ram vertical travel Positioning speed / rapid traverse speed 15,000 mm/min. 2-axis rotary/swivel milling head A & C A-bushes simultaneously Positioning speeds / rapid traverse speeds 10 rpm. Spindle drive power 20 kW Spindle speeds up to max. 30,000 rpm (electrospindle) 20-fold tool changer Tool diameter max. 80 mm Tool length max. 125 mm Tool weight max. 10 kg 16 units TorresTool pogo stick clamping system - NC controlled 5-axis gantry milling and drilling machine. Designed for high-speed milling and drilling of aircraft structural compone ...
One used mesh welding line for standard mesh working line- and cross wires off spools, mainly exesting of: Line wire feed from spools, straightening units, line wire pull-off and compensating mechanism ( loop ), Roller Advance Feed, cross wire feed with disc insertion from spools, welding machine, Line Wire Shear mesh turning and stacking unit tying system for the mesh packages Extras: Spools Spare part package Butt welder
Refer to code 1153 in your request More information on our web page G3 Mixing Technologies - G3 STOCK or LinkedIn G3 STOCK Used machine, possibility to be purchased "as is" without warranty, or completely rebuilt and guaranteed as new machine.
Dobot collaborative robot DOBOT MG400 Model No.: DT-MG-P4R07-01I Weight: 8 kg Payload: 500g (max. 750g) Reach: 440mm Axles: 4 Repeats: ±0.05 mm The amount indicated is net. The statutory VAT of 19% will be added at checkout. You will receive a proper invoice with VAT.
Manufacturer: Howial, Type: MGZ 238, Year: 1980, Control: hand, Work piece width min-max mm: 30-120, Min.-max. workpiece length in mm: 400-3000, Min.-max. workpiece height in mm: 12-60, Longitudinal feeding: yes, Stack height in mm: ca.600 mm, Feeding speed max m/min: 40, Pushing device with catch: yes, Year :1980
Height=2.55 m, Overall length= 2.4 m, Overall width= 3 m, Net weight= 3100 kg,
Granulating sieve Manufacturer: Frewitt Type: MGI - 205 Capacity: up to 1,000 kg/h (depending on the product) Motor power 0.75 kW-1.0 kW Bearings dust-tight inside and out, rotor speed infinitely adjustable The machine is suitable for dry granulation, screening, crushing, grinding, wet granulation. Rotor speed infinitely adjustable, easy cleaning Seven sieve inserts available (table is not included), documents available
Manufacturer: Baykal Model: MGH 3110 Cutting length: 3060 mm Heavy-duty hydraulic swing beam shear CNC Control: CYBTOUCH 8W Suitable for processing all types of sheet metal Max sheet thickness: up to 20 mm Max sheet length: up to 4100 mm The MGH” series of hydraulic guillotine shears from Baykal is designed for fast, precise, and economical cutting of sheet metal with thicknesses starting from 10 mm. This heavy-duty swing beam shear ensures a 100% secure sheet hold with its hydraulic hold-downs. Sheet feeding is assisted via a support table with integrated ball rollers, and pressure regulation is possible to optimize cutting performance. Find more here - / Contact us at -
CNC Plasma Cutting Machine MGM Arrow 2000-4 , Year 2008 Control: MS 100 Working Area : 2000mm x 4000mm 1 x Plasma Kjellberg HiFocus 160i with automatic gas console - incl. extraction 5500m³ built in 2006 / MGM - incl. declaration of conformity - incl. tech. Documentation - Incl. various nozzles (spare parts) at call
Ruhle - MGR 400 Tumber Tumbler Manufacturer: Ruhle Model: MGR 400 Power: 12kW Capacity: 400 litara Up to 25rpm Stainless steel Cooling option Voltage: 400V / 50Hz / 3N Dimensions: 2150x2150x1930mm
Twinpack automatic handle applicator model MGE Manufacturing year 2010 Setting handles on shrinked bottles packs Capacity up to 50 packs per minute Siemens S7 machine drive CE control panel Machine in very good condition Recently dismantled and now stored dry and clean in warehouse Available immediately
Container Size With Actual Configuration: 1 l // Number Of Heads: 1
2 pcs 18.5 kW Grundfos centrifugal pumps: MGE160LB2-FF300-F3 + NBE65-160/177 AF2ABQQE ENGINE: Type: MGE160LB2-FF300-F3 P.N.: 85901266-V03 Power: 18.5 kW PUMP: NBE65-160/177 AF2ABQQE Model: B97979196P219120001 Flow rate: 118.2 m³/h Lifting height: 36.2 m Pumps are functional, but operating hours are unknown. Attention! Sold in "as is" and under exclusion of any warranty
General SKU328W698 LocationBarneveld MakeLoedige TypeMGT-250 Mach.No.16.141 Main Features MaterialStainless steel Volume250 Ltr. Motor22 KW Specified Features - Universal mixer Universal mixercheck Capacity250 l., (210 l.) Vessel sizes⌀ 785 x 500 mm With covercheck Inlet785 mm Pneumatic operated outletcheck Outlet⌀ 200 mm With motor22 kW, 400 V, 1460 rpm, (Ex) Rotor speed30-300 rpm With lump breakercheck With motor4.7 kW, 400 V, 1450 rpm Rotor speed1450 rpm MaterialStainless steel 1.4404 (316L) Information Year of construction2008 CEcheck Floorspace2,50x1,30 m Total height2,36 m Weight1900 kg ATEX compatiblecheck Extra Specificationscheck Suitable for mixing under Nitrogen. Mixing granulator for pharmaceutical products, cosmetics and food. GMP-compliant design. Modular WIP system for the machine and all additional components. : Universal mixersLoed ...
General SKU408S982 LocationBarneveld MakeLoedige TypeMGT250P/1MZ Mach.No.10 297 Main Features MaterialStainless steel Volume250 Ltr. Motor10 KW Specified Features - Universal mixer Universal mixercheck Capacity250 Ltr. (nett. 220 Ltr.) Vessel sizesdia. 790x510 mm With covercheck Inletdia. 790 mm, DN 150 (2x) Pneumatic operated outletcheck OutletDN 150 With motor9/10,5 kW 380V (Ex) With variable speed drivefrequency regulator Rotor speed1500/3000 rpm. MaterialStainless steel Information Year of construction1982 Mounted on framecheck With switchcheck With switchgearcheck Floorspace2,1x1,1 M Total height2,5 M Weight1400 Kg ATEX compatiblecheck Extra SpecificationsWith a platform with dimensions: 1400x900x1680 mm Universal mixersLoedigeMixers > Universal mixersBrand > Loedige What you can expect from Foeth: -- Machine is in working condition -- At a reduced pr ...
General SKU317X538 LocationBarneveld MakeLödige TypeMGT250G-1MZ No.8936 Year of construction1979 Main Features MaterialStainless steel Volume250 Ltr. Motor11 KW Specified Features - Universal mixer Universal mixercheck Capacity250 l. Vessel sizesDia. 785x510 mm With covercheck InletDia. 50 mm Pneumatic operated outletcheck OutletDia. 150 mm With motor9,5/11 kW, 380 volt, 1500/3000 rpm Rotor speed1500/3000 rpm With lump breakercheck With motor4,9/5,9 kW, 380 volt, 1500/3000 rpm Rotor speed1500/3000 rpm With timercheck MaterialStainless steel 1.4541 (321) Information Mounted on framecheck With switchgearcheck Floorspace1,0x2,0 m Total height2,10 mUniversal mixersLoedigeMixers > Universal mixersBrand > Loedige What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination world ...
CNC gear rack grinding machine - Automatic grinding head - B-Axis Grinding head ca 20 gr swivel - ARO - KKS coolant tank 8000 L ( size 4400 x 1900 x 2200) - Pendel opperation ( double table) - Dresser automatic - Table dresser
A hydraulic CNC plate shear Baykal is available. Cutting length: 3060mm, max. sheet thickness (St42): 10mm, operating pressure: 260bar, stroke rate: 12/min. Machine dimensions X/Y/Z: approx. 4000mm/2600mm/2000mm, weight: approx. 9600kg, control system: Delem DAC 310. Documentation available. On-site inspection is possible.
This FELDER MG580 edgebander was manufactured in 2010. Ideal for precise edge banding applications, it represents a reliable choice for enhancing your woodworking operations. Contact us for more information.
This MGM Omnicut 3100 was manufactured in 2013. A robust plasma cutting machine, it features a 12-meter table and a powerful Kjellberg HiFocus 360i plasma source. It efficiently handles mild steel up to 80 mm, stainless steel up to 80 mm, and aluminum up to 100 mm. If you are looking to get high-quality cutting capabilities, consider the MGM Omnicut 3100 machine we have for sale. Contact us for more information.
A glass glazing bead saw Elumatec is available. Saw blade diameter: 400mm, max. speed: 3800rpm, machine dimensions X/Y/Z: approx. 1250mm/650mm/800mm, weight: approx. 250kg. Including roller conveyors. Dokumentation vorhanden. An on site inspection is possible.
Key data: 5 KW, 2860 1/min
Used Grundfos MGE 132SB2-38FF265-B electric motor with frequency converter Power 5.5 KW Voltage 400V, frequency 50Hz., current 12.0A, IP55 Speed 700 to 2860 rpm. With remote control / remote R100. Without pump. Sale only to tradespeople.
General SKU202T023 LocationBarneveld CEcheck MakeLoedige Pressure Working pressure jacket0.5 Bar Main Features MaterialStainless steel Volume600 Ltr. Motor30 KW Specified Features - Universal mixer Universal mixercheck Capacity600 ltr With covercheck Inlet150 mm Pneumatic operated outlet200 mm Max. temperature110 Degr. C With motor30 kW MaterialMild steel, Stainless steel Information TypeMGT 600 G-1 MZ Mach.No.7965 Year of construction1976 Floorspace1,9x1,2 m Total height1,7 m Weight3200 kg Extra SpecificationsControl cabinet, 220-380 volt, :Universal mixersLoedigeMixers > Universal mixersBrand > Loedige What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld f ...
General SKU311T742 LocationBarneveld MakeGebrüder Lödige GmbH (DE) Main Features MaterialStainless steel Volume30 Ltr. Motor3 KW Specified Features - Universal mixer MaterialStainless steel 1.4541 (321) Universal mixerSingle Pot Mixer granulator Capacity25 Ltr. (30 Ltr. bruto) Vessel sizesdia. 400x225 mm With covercheck Manual operated outletcheck Outletdia. 80 mm With motor3,0 KW, 380 Volt (EEx de IICT4) With variable speed drivecheck With lump breakercheck With motor1,3/1,9 KW, 380 Volt (EEx deIICT4) Rotor speed1500/3000 rpm Information TypeMGT 30 Mach.No.11.236 Year of construction1986 Mount.on stainless steel framecheck Mounted on wheelscheck With switchcheck Floorspace1,3x0,7 M Total height1,3 M Weight740 KGUniversal mixersLoedigeMixers > Universal mixersBrand > Loedige What you can expect from Foeth: -- Machine is in working condition -- At a reduce ...
Max. saw blade diameter: 550 mm Manual swivel with digital display Motor-controlled axis for tilting the saw blade with digital display and speed adjustment via potentiometer Stepless saw blade feed Minimum quantity spraying device Weight: approx. 1,000 kg
General SKU442X1414 LocationBarneveld MakeLödige TypeMGT 600 Main Features MaterialStainless steel Volume530 Ltr. Motor45 KW Specified Features - Universal mixer MaterialStainless steel 1.4301 (304) Universal mixercheck Capacity530 l. Vessel sizesø 1088 x 570 mm With covercheck InletDN240/150 Pneumatic operated outletcheck OutletDN200 With motor45 kW, 400 V, 3000 rpm Rotor speed208/1500 rpm With lump breakercheck With motor5,5 kW, 400 V, 3000 rpm Rotor speed3000 rpm Information Mach.No.M24206 Year of construction1998 Mounted on framecheck With switchgearcheck Floorspace2,70 x 1,25 m Total height2,10 m Weight2700 kgUniversal mixersNew arrivalsLoedigeMixers > Universal mixersNew arrivalsBrand > Loedige What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide - ...
General SKU424X1321 LocationBarneveld MakeLödige Main Features MaterialStainless steel Volume220 Ltr. Motor18 KW Specified Features - Universal mixer MaterialStainless steel 1.4301 (304) Universal mixercheck Capacity220 l. Vessel sizesø 785 x 500 mm With covercheck InletDN150 Pneumatic operated outletcheck OutletDN150 With motor9,5/11 kW, 400 V, 1500/3000 rpm With variable speed drivecheck Rotor speedLow speed 296,4/149 rpm, high speed 1880/940 rpm With lump breakercheck With motor4,9/5,9 kW, 400 V Information TypeMGT 250 Mach.No.14180 Year of construction1998 Mounted on framecheck With switchgearcheck Floorspace2,20x1,00 m Total height1,55 m Weight1100 kgUniversal mixersNew arrivalsLoedigeMixers > Universal mixersNew arrivalsBrand > Loedige What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready f ...
Laboratory ball mill with 2 independent grinding devices (each with 0.25 kW drive) for fine grinding down to less than 10 microns. Incl. control box with timers, grinding balls (Alubit) and 1 ceramic grinding bowl.
A scarcely used Rühle cooling vacuum tumbler with mixing, marinating and tumbling function is available. Container volume: 400l, max. filling volume: 300l, refrigerant: R404A, refrigerant quantity: 760g, mixer arm speed: 25rpm, polter arm speed: 25rpm, lifting aid load capacity: 300kg. Machine dimensions X/Y/Z: approx. 2100mm/2650mm/2700mm, weight: approx. 1400kg, operating hours: 7540h, mixing hours: 553h. Documentation available. An on-site inspection is possible.
Used MG2 capsule machine type G37/N. Capacity 100,000 capsules/hour. Year of manufacture 1986.
End mill, milling cutter, shank thread milling cutter, thread cutter -Manufacturer: JAL PWS P, 29 pieces shank thread milling cutters -Hole: Ø 27 mm 25 pieces, Ø 32 mm 4 pieces -Various types: see photos -Sizes: see photo parts list -Price/Sale: complete -Dimensions: 240/180/H150 mm -Total weight: 4.2 kg
Gear motor, electric motor -Manufacturer gearbox IP type: MRV10F1 -Engine manufacturer: MGM BA71B4 -Speed: 93 rpm -Power: 0.37 kW -Construction: B5 angle -Diameter hollow shaft: Ø 22 mm -Protection class: IP 54 -Number: 1x motors available -Price: per piece -Dimensions: 460/160/H210 mm -Weight: 14.7 kg
maximum number of results exceeded
please refine your search
