pe used for sale

SPECIFICATIONS: Table: 1000 x 1000 mm Flywheels: Ø 900 mm Saw blade length: 5985 mm Saw blade width: 108 mm Electronically adjustable saw blade guide Manual saw blade adjustment Installed power: 15 kW EQUIPMENT: 1 Resawing Saw (SAM meccanica SR/026) SPECIFICATIONS: Installed power: 0.37 kW Operating pressure: 5÷7 bar Roller: Ø 200 mm Roller height: 400 mm Max. opening angle - saw blade: 200 mm Max. opening roller - saw blade: 400 mm

Single column - eccentric press KRUPP type PEKRD 125 hMasch. No. 2861 Year of construction 1977Compressive force 125 ton. Projection 400 mmTable size 950 x 750 mmPlunger area 800 x 540 mmTable opening 100 x 250 mmStroke adjustment 8 to 160 mmPlunger adjustment 100 mmInstallation height largest stroke at the top max. 550 mmStroke rate 60 strokes/min. Table height above floor 800 mmEngine power 10 kWNetz connection 380 Volt, 50 Hz- Hydraulic overload in the plunger- Compressed air clutch-brake combination ORTLINGHAUS-

Punching capacity steel: 25x16mm, material strength: 45/60/80kg/mm² depending on hole diameter, angle steel 90°: 110x10mm, angle steel 45°: 90x9mm, T-steel 90°: 110x10mm, T-steel 45°: 90x9mm, U and I profiles: up to NP/IPE 18, round steel diameter: 42mm, square steel: 38x38mm, max. sheet thickness for notching: 12mm, notching width: 50mm. An on-site inspection is possible.

Perkins 1100 Series 1103A-33TG2 60.5 kW / 85,8 hp @ 1500 rpm; Power [PS]: 82; Transport weight [kg]: 420

Perkins 1100 Series 1104D-44TA, 83.0 kW / 111.3 hp @ 2200 rpm; Power [PS]: 113; Transport weight [kg]: 567

; Transport weight [kg]: 840

Single column - eccentric press PELS - RICHTER type PEKR 125Masch. No. 20684 Year of construction 1967Compressive force 125 ton. Projection 430 mmTable size 1100 x 750 mmPlunger area 890 x 650 mmTable opening 400 mmStroke adjustment 6 to 115 mmRam adjustment 100 mmInstallation height largest stroke top max. 450 mmClamping pin bore 50 mmStroke rate 60 strokes/min. Table height above floor 900 mmMotor power 7.5 kWNerg connection 380 volts, 50 Hz- overload protection by crushing plate in the plunger- compressed air

Two complete injection molding plants with two Husky injection molding machines, four complete moulds with all-metal separator, Motan gravimetric mixing system and crane system are available. 1) 2x Husky H-PET230 AE RS95, year of manufacture: 2015, max. shot weight: 2424g, max. PET throughput: 390kg/h. 2) 48-cavity H-PET mold, preform weight: 17.8g, length: 89.35mm, wall thickness: 3.06mm, base thickness: 2.30mm, cavities: 48, cycle time: 12.1s-12.7s. 3) 48-cavity H-PET mold, preform weight: 30.26g, length: 122.3mm, wall thickness: 3mm, base thickness: 2.3mm, cavities: 48, cycle time: 14.4s-15s. 4) 32-cavity H-PET mold, preform weight: 18g, length: 82.04mm, wall thickness: 2.7mm, base thickness: 2.2mm, cavities: 32, cycle time: 11s-11.7s. 5) 32-cavity H-PET mold, preform weight: 29g, length: 108.59mm, wall thickness: 3.16mm, base thickness: 2.42mm, cavities: 32, cycle time: 13.4s-14s. To ...

Vertical band saw PEHAKA type SM 4Fabr. No. 27060 Year of construction approx. 1980Projection 380 mmTable size 620 x 480 mmCutting height 250 mmRoller diameter 400 mmWorking height 1120 mmSaw blade length min. 2900 - max. 3100 mmSaw blade speed 22-125 m/min. infinitely variableMotor power 0.6 / 0.75 kWNet connection 380 volts, 50 Hz- infinitely variable saw blade speed via Vario belt drive with lever adjustment and 2 motor speeds- Saw table tiltable +/- 15- Saw blade butt welding machine IDEAL BS 0-16-

Lampertz Doku Data Safe PE12 Data Backup Cabinet Lampertz Doku Data Safe Data Backup Cabinet Locker insert Documentary Floppy Tray Shelf with slots Right stop side Fire protection class S 120 P according to EN 1047-1 2 hours of fire safety for documents and paper Resistance grade 1 according to EN 1143-1 Year of Make: 2005 Overall dimension Height: 1976 mm Width with hinge: 955 mm Depth incl. handle: 777mm Internal dimensions Height: 1714 mm Width: 734 mm Depth: 440 mm Weight: 850 kg More items - new and used - can be found in our shop! International shipping costs on request!

Aircooled chiller CARRIER 30RA 090 B0723 PEE 89 kW Cooling capacity: 89 kW / 25.31 tons (12/7 — 35°C) Year of manufacture: 2009 Options: Hydraulic module Refrigerant circuit: 2 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 1 pcs. DANFOSS CSHA150KE (scroll) + 2 pcs. DANFOSS SZ120S4VC (scroll) Type of refrigerant: R407С Number of fans: 2 pcs. Hydraulic module: 1 pcs. water pump Ebara DWC-N/I300/1.1 IE3, expansion vessel. Dimensions: 2.3x2.07x1.33 m. Weight: 1093 kg. Working hours: 10730/12540/12570 h. Condition: Good

Tightening Banding Machine for Shrink Film

Key data: 200 KW, 250 kVA, 400 V

3x volvo penta canopy (silent)

Mahr Perthene Perthometer S4P Roughness Meter 1 x Mahr Perthene Perthometer S4P Roughness Meter 1 x Mahr Perthen 6 86 20 63 1 x Mahr Perthen 42 50 01 50 to 160 mm Ø Find more Roughness Gauges in other sizes - new and used

Max. punching and shearing capacity: 800 kN For example, punches 25 mm holes in 20 mm steel Shears on the flat steel shear on 350 mm to 15 mm steel Further technical data on request With an assortment of stamps and dies as desired

Inv. Num. : 8584 Type: PEDA 160 Producer: IWK Created: 1972 Parameters: Compressive force: 160 t

Peco Welding Machine Spot Welding Machine Peco welding system welding of flat strip and electr. Management Peco LA 40 Air Control Bosch E35... DYF welding control You can find more welding systems in other sizes - new and used - in our shop! International shipping costs on request!

Key data: 48 KW, 60 kVA, 400 V

In stock now! 30 months warranty! Perkins Engine Stamford Alternator ComAp Control ABB Disconnect Switches Generator Set Specifications: Model No.: EQ-P6048 Continuous power (Prime Rating): 60 kVA / 48 kW Emergency power (standby rating): 66 kVA / 53 kW Voltage: 400/230V Frequency: 50 Hz Speed: 1500 rpm Engine Specifications: Engine Brand: Perkins Engine Model: 1103A-33TG2 Bore x Stroke (mm): 105 x 127 Displacement (L): 3.3 Compression ratio: 17.3:1 Intake system: turbocharging & intercooler Fuel System: In-line Injection Regulator Type: Mechanical Dimensions of the generator set: Length: 2220 mm Width: 960 mm Height: 1258 mm Weight (open): 1085 kg Standard: 4-stroke, 1500 rpm, water-cooled robust diesel engine Leroy Somer Generator ABB Circuit Breakers Protection system in manual operation Flexible oil hoses and oil drain valve Preheater  ...

We are offering for sale a Perfecta cutting line, all components built in 2013, consisting of: 1.High-Performance High-Speed Cutter Perfecta 168 TS Cutting width: 1,680 mm, usable rear table length: 1,680 mm Working height: 165 mm, min. offcut strip: 26 mm Pressing force: 3.5-60 kN Material clamp + rotating saddle, 6 carbide knives, with 5 knife boxes Table height: 890 mm Side tables on the right: 1 x 1.5 m, left: 1 x 0.5 x 1.5 m + 0.5 x 1.25 m Net weight: 6,900 kg - Total: 6 knives, all in good condition, 2 of which are almost As good as new The unloader can also be rotated 90 degrees parallel to the paper discharge direction if required. 2.Perfecta ZTS 2750 Clamp Transport System For automatic feeding of the high-speed cutter via the rear table.The cutting line is in very good condition and still in production. Max. clamp travel: 2,750 mm Insertion height without adapter: ...

Quality goods from German brand manufacturer OBECK Product: Can: Material: PET (polyethylene terephthalate) Color: White Volume: 400 ml Diameter: 93 mm (SP400) Height: 81 mm Weight: 36 g Food safe & recyclable Lid: Type: Screw Cap (Smooth 89SP400) Material: PP (polypropylene) Color: Black Height: 14 mm Uses: ✅ Food packaging (spices, nuts, protein powder) ✅ Cosmetic products (creams, lotions, masks) ✅ Dietary supplements (capsules, powders) ✅ Industrial supplies (chemicals, paints, adhesives) (Prices per can and lid combined) 2880 - €0.35 5760 - €0.32 11520 - €0.30 €20,160 - €0.26 48.960 - 0,22 € €100,800 - €0.20 400.320 - 0,18 € Minimum order: 2880 pieces (2 pallets) Location: Greven Shipping: Forwarding or self-collection (by arrangement) Quick to sell – We need space and are much cheaper than the manufact ...

used, technically overhauled reinforcing steel bending machine. PCN control unit Rotations of the bending disc 8/16 rpm. Connection 16 A Single bend max. 1 piece of reinforcing steel 28mm D. Standard bending tool 2 pieces of foot switch with emergency stop function.

used, technically overhauled cutting machine Peddinghaus Simplex 60 H Hydraulic hold-down. The cut is triggered by a footswitch with emergency stop function. The shears are electro-hydraulically driven. Connected load 11KW 400V/32A Max. cutting capacity 3 bars 28mm diameter reinforcing steel.

Complete line for filling cans Very good condition! We have used the plant for dry pipe tobacco. It can be used for all free-flowing products, such as spices, nuts, seeds, gummy bears and many other types of food. All components of the system are coordinated by an experienced team and were used as a complete line. If you want to fill easily free-flowing product into cans or even first into bags and then into cans (both possible), then this is the perfect system for you. The system can be filled into tubular bags as well as directly into cans. The entire plant has a capacity of 30 cans/minute. Some components of the system, such as the capper and the labeller, even have a significantly higher capacity. Adapted for 400 ml cans, we used Obeck and Polipack and both ran perfectly. Other can formats are possible, but the system can be adapted (extra costs apply). The facil ...

used, technically overhauled reinforcing steel bending machine. PCN control unit Rotations of the bending disc 8/16 rpm. Connection 16 A Single bend max. 1 piece of reinforcing steel 28mm D. Standard bending tool 2 pieces of foot switch with emergency stop function.

Perkin Elmer Headspace Sampler HS 40XL, Headspace sampler for 40 vials

Key data: 648 KW, 810 kVA

We currently offer: Perkins generator set Type: 3012-TAG2A Generator Stamford Type: HC. I634G1 Power: 810 KVA / 648 KW RPM 1500 Hz 50 IP 22 AVR Control MX321 Year of construction 2002 Operating hours 74 Control cabinet not included You can find more machines on our website. If you have any further questions, please feel free to contact us. Adel e.K. Commercial Vehicles-Construction Machines Car Recycling Machine Dismantling Gottlieb-Daimler Str. 26 D-74831 Gundelsheim Phone: 0049 1796710242

We currently offer: Perkins generator set Type: 4408/1500 Generator LeRoy Somer Power: 150 KVA Year of construction 2022 IP 23 Hz 50 RPM 1500 AVR control R150 Operating hours: only ran 1h for testing Metrics: L: 3.30m H: 2.10m B: 1.20m Weight: 2 tones You can find more machines on our website. If you have any further questions, please feel free to contact us. Adel e.K. Commercial Vehicles-Construction Machines Car Recycling Machine Dismantling Gottlieb-Daimler Str. 26 D-74831 Gundelsheim

We currently offer: New Perkins 4 Cylinder Engines Type: 404A-22G1 2.2 liters RPM 1500 Power: 20.3 KVA You can find more machines on our website. If you have any further questions, please feel free to contact us. Adel e.K. Commercial Vehicles-Construction Machines Car Recycling Machine Dismantling Gottlieb-Daimler Str. 26 D-74831 Gundelsheim Phone: 0049 1796710242

ROMACO NOACK BLISTER PACKING LINE --- 1) BLISTER PACKING MACHINE ROMACO NOACK, MODEL N921 Year of construction: 2010 Rotary sealing machine. With the latest servo technology, and the best tool-free changeover times in the industry. CHARACTERISTICS • Carton output: 400/min. (max) • Forming cycles: 100/min. (max) • Blister output: 500/min. (max) Compatible products: Tablets, capsules, soft gels, caplets, child-resistant/senior-friendly packs, coldform aluminum, multi-layer lidding materials • Foil width: 210 mm (max) • Forming depth: 12 mm (max) Reel diameter forming foil: 700 mm (max) • Reel diameter lidding foil: 280 mm (max) • Carton size (A/B/C): 120/95/210 mm (max) ---- 2) UHLMANN CARTONER, MODEL C150 Year of construction: 2010 Cartoner for big industrial production as well as in smaller, less equipped factories. with GMP-compatible pharm ...

30 pcs generators with diesel engine Engine Type: Perkins 2506C-E15 TAG2 Power PRP: 500 kVA Power LTP: 550 kVA Year: 2012 Hours: Less than 300 Speed: 1500 1/min Generator: Leroy Somer LL6114F Voltage. 400/231 V, 50 Hz Type: Container Was used as an emergency power system, only ran for test runs and inspections. Subject to prior sale - errors possible! Internal reference number: E-1004-102

Height=1.4 m, Overall length= 0.7 m, Overall width= 2.15 m, Net weight= 365 kg,

Manufacturer: Petratto Model: SC 10 Year of Manufacture: 2006 Type of Machine : Folder Gluer Find more here - / Contact us at -

Manufacturer: Peak Model: Precision Hydrogen 200cc 100–230V Year of Manufacture: 2020 Type of Machine : Hydrogen generator Specifications: - Voltage: ~100/230V - Frequency: 50/60 Hz - Current: 6 Amps - Maximum Output Pressure: 100 PSI Find more here - / Contact us at -

X-axis: 3050mm, Y-axis: 2050mm, Z-axis: 120mm, wavelength: 9.3-11.5µm, laser power: 300W, laser class: 1, operating pressure: 2bar, control: Beckhoff TwinCAT, length: 5050mm, width: 2950mm, weight: 3.8t, with CO2 laser Rofin Sinar SCX 30 HP 16.6, year of manufacture: 2022. An on-site inspection is possible.

punching pressure: 28.0 t punching cross-cut in cmm: 31 in 7.0 mm ST throat: 250 mm dayligth: 223 mm no. of strokes: 10 - 30 Hub/min oil volume: 32.0 ltr. work height max.: 1033 mm total power requirement: 3.0 kW weight of the machine ca.: 553 kg dimensions of the machine ca.: 730 x 540 x 1530 m Furnishing: - Punch quick-change device up to Ø 31 mm - green series - installed: round punch no. 5 Ø 25.0 mm and round die no. 3 Ø 25.7 mm - Free: LED lighting in the punching area - Swiveling scraper (plates exchangeable) - Various material support tables are available separately - Brace - 2-step foot switch, with double press for grain search function - electrical controls - Stroke length and stroke position continuously adjustable - integrated hydraulic unit with oil filling - Performance specifications apply to a material strength of 450 N/mm² - Main connection cable and plug for 16 amp ...

pressure: 100 t punching cross-cut in cmm: Ø 31 in 25 mm stroke: 10 - 50 mm column arm: 510 mm work height max.: 1100 mm no. of strokes: 14 - 45 Hub/min punch diameter: max. Ø 90.0 mm oil volume: 103 l total power requirement: 7.5 kW weight of the machine ca.: 2400 kg. range L-W-H: 1750 x 1020 x 2050 mm maintained condition () New price without accessories approx. 25.000 euros Special price on request Furnishing: - heavy / robust electro-hydraulic hole punch, with large throat - Punching station with material/sheet metal scraper - stepless stroke adjustment .. 10-50 mm - freely movable foot switch including protective cover - hydraulic low pressure finder for foot switch operation - Crane hanging eye for easy transport - side storage area - Hydraulic unit, integrated - Three-phase motor, 400 volts, 50 Hz - original instruction manual The data for this ad was created with ModulMWS ...

pressure: 80,0 t punching cross-cut in cmm: 31,0 in 25 mm shear: flat material: 500x18 / 300x22 mm L-beam: 150 x 12 mm round bar steel: 50 + 25 mm square edge steel: 50 + 30 mm throat: 510 mm blade length: 500 mm work height max.: ca. 1.100 mm total power requirement: 7,5 kW weight of the machine ca.: 3200 kg dimensions of the machine ca.: 2000 x 1000 x 2100 mm from a maintenance workshop Furnishing: - Robust electro-hydraulic combined profile steel shears - Notcher, hole punch, bar steel knife, profile knife and tin snips - Stop table at the hole punch, with blank holder - Stop table at the notcher - 2x floating footswitches - Stroke adjustment for fast stroke sequence - 1x PEDDINGHAUS contact length stop: 1.000 mm - Safety devices - Operating instructions in German The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 640 KW, 800 kVA, 400 V

Perkins P800 640KW 800KVA 400/230 Volt 50hz hours 144 year 2000 Machine in stock in the netherlands General Power Holland B.V Kranenpool 10 6443VA Brunssum Netherlands

blade length: oben 211/unten 180 mm plate thickness: max. 6 mm round bar steel: max. 13 mm weight: ca. 19 kg Sturdy shears body of quenched and tempered steel. Moving blade guides free of play (with low friction losses), blades of special tool steel, specially hardened and ground. Lever arm with counterweight spring for protection in the event of accidents, all pivot pins adjustable, all models with steplessly adjustable clamping arm. With compound action. Cuts sheet metals and round steel bar. Colour: Red-brown The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Perfecta Schmid Model: DUPLOMAT 86 N ELTRON III Power Requirements: 3 x 380 V, 50 Hz Find more here - / Contact us at -

Spectrometer of Perkin Elmer Pin AAcle 900 F, used, fully functional