pe pipe used for sale

Permanent Magnet DC Servo Motor SIEMENSTyp: 1 HU3074-0AC01-ZNR. B J157 1047 01 008Voltage = 167 Volts DC = DC voltagePower = 1.8 kWScurrent consumption = 12.5 AmpereSpeed = n. max.: 2000 rpmNominal torque = Mo 7 NmShaft diameter 24 mmStump shaft length 50 mmCentering diameter 130 mmBolt circle diameter 165 mm / 4 x 11 mm Bore shaft with 8 mm keywayHousing dimension L/W/H 335 x 140 x 145 mmWeight: 23 kgGood condition; used

consisting of three pieces Auction-ID: A7-49089-551

consisting of two pieces Auction-ID: A7-49089-423

unused radiator with fan assembly, for Perkins 4012-46TAG2A

Used Used Pet preform presses Engel: Year: 2004 Condition: As Is Model: MacPET 4550-320 maszyna Year: 2004 Speed: preform 24,5g ca 21.900 pcs/hrs preform 29,0g ca 20.100 pcs/hr Number of molds: 72 Code: W 110 More details: https://bottlingscout.com

Used Used pet preform presses Husky: Year: 2010 Condition: As Is Model: HyPET300 HPP P100/110E 120-hpp 26 Year: 2010 Speed: preform 11,4g ca 39.800 pcs/hrs; preform 13,0g ca 38.100 pcs/hrs Number of molds: 72 Code: W 109 More details: https://bottlingscout.com

Electric walking forklift, ride-on pedestrian stacker STILL type EGV 14Fabr. No. 330221900092 year of construction 2009Nominal load capacity 1400 kgLifting height 5475 mmFork length 1160 mmTotal length 1930 mmTotal width 860 mmOverall height 2330 mmOperating voltage 24 volt- Triplex mast with 1830 mm Free lift- 689.3 operating hours read- Battery from year of construction 08/2008, type 3 PZS 315 (24Volt / 315Ah)- Automatic charger- New TÜV test UVV (surcharge 150,-- EUR net)Weight 1440 kgGood condition, battery bad. Surcharge

Electric walking forklift, pedestrian stacker JUNGHEINRICH type EJC 14G-115-290ZTSerien. No. 80582366 year of construction 1997Nominal load capacity 1400 kgNominal lifting height 2900 mmFork length 1150 mmTotal length 2000 mmTotal width 850 mmOverall height 1900 mmOperating voltage 24 volt- Duplex mast without free lift- 5721 operating hours read- Battery from year of construction 2014, type 24 V 3PzS 345 (24Volt / 345 Ah)- Automatic charger- New TÜV test UVV (surcharge 150,-- EUR net)Weight 1050 kggood condition; used

Electric walking forklifts, pedestrian stackers JUNGHEINRICH type EJC 214 series. No. 90334640 year of construction 2009Nominal load capacity 1400 kgNominal lifting height 3200 mmFork length 1150 mmTotal length 2000 mmTotal width 810 mmOverall height 2050 mmOperating voltage 24 volt- Duplex mast with 1600 mm free stroke- 4356 operating hours read- Battery from year of construction 2009, type 3PZS 375 (24Volt/ 375 Ah)- Automatic charger Jungheinrich 24 Volt, 40 Ampere- TÜV test UVV until 11.2025Weight 1200 kggood condition; used

Key data: 132 , 40 , 750

Year of construction 2015 Capacity: 750 m³/min. Delivery pressure: 40 bar Rotation speed 330 rpm. Electric motor 132 kW incl. refrigeration dryer The PET compressor is in mint condition, with few operating hours

For sale is a used pelletizing line that has pelletized fertilizers based on wood fibers with cattle manure and fermentation residues in the last 4 years (approx. 5,000 h in total). Various well-known manufacturers are installed such as Amandus KAHL pellet mill / continuous mixer, Bühler hammer mill / conditioner, CPM pellet cooler, Wynveen pellet screen, Rako / Apullma conveyor technology Achievement: 1. Wood chips with cattle manure, dried approx. 1.5 t/h 2. dried, separated compost / dried digestate approx. 2.5 t/h 3. According to the manufacturer KAHL, the press can produce up to 3 t/h in the biomass Since the customer is now converting his business, it is for sale. In principle, the aim is to sell the entire line, a partial sale of the components is also possible by arrangement. The main components are: -Conveyor - Grinding: Hammer mill with screen drum, 2-fold ma ...

Load capacity: 1450/1125kg, load center: 600mm, lift height: 3200/4900mm, battery weight: 300-350kg, free lift: 900mm, mast height lowered: 2100mm, mast height extended: 4900mm, reach: 590mm, ground clearance under mast: 80mm, ground clearance at axle center: 50mm, track width: 1292mm, frame cross-section: 1058mm, front overhang: 655mm, wheelbase: 1120mm, rear overhang: 175mm, side shift: 80mm left / 80mm right, lost load thickness: 880mm, fork tilt back: 3°, fork tilt forward: 3°, min. turning radius: 1350mm, support arm height: 282mm, support arm length: 530mm, maximum speed: 6km/h, gradeability: 5%, battery capacity: 24V/270Ah, fork dimensions: 35x100x1070mm, front wheels (polyurethane): OD 200mm / width 50mm, rear wheel (solid rubber): outer diameter 250mm / width 75mm, AC drive motor: 24V / 2.5kW, AC pump motor: 24V / 5kW, rated power: 2.5kW, width: 1512mm, length: 1950mm, net wei ...

PET machine for items up to 1.5 ltr. Equipped for PCO 1881. Moulds in 500 - 750 - 1,000 - 1,500 ml optionally available. Voltage 400V 50Hz. Power for bottles in 1,500 mL. 21,115 per hour. Machine can be viewed in operation

Height=1.1 m, Overall length= 0.65 m, Overall width= 0.45 m, Net weight= 68 kg,

Height=1.05 m, Overall length= 0.62 m, Overall width= 0.55 m, Net weight= 64 kg,

Height=1.51 m, Overall length= 1.77 m, Overall width= 1.04 m, Net weight= 173 kg,

Height=1.4 m, Overall length= 0.75 m, Overall width= 2.42 m, Net weight= 210 kg,

Height=1 m, Overall length= 0.6 m, Overall width= 0.55 m, Net weight= 66 kg,

Height=2.25 m, Overall length= 0.67 m, Overall width= 0.9 m, Net weight= 178 kg,

Height=1.18 m, Overall length= 0.75 m, Overall width= 0.6 m, Net weight= 90 kg,

Height=1.18 m, Overall length= 0.75 m, Overall width= 0.6 m, Net weight= 90 kg,

Height=1.38 m, Overall length= 0.94 m, Overall width= 2.38 m, Net weight= 185 kg,

Height=2.55 m, Overall length= 1.2 m, Overall width= 3.2 m, Net weight= 1000 kg,

ABL PDS 50 is apple peeler machine. Good working condition.

GUK FA 21/4 S2 SVA/730 stand-alone leaflet folding machine, 4 folding pockets, sheet format unfolded: min. 60 x 90 mm, max. 215 x 320 mm, smallest folding 15 mm, recommended paper weight 50-70 g/m², automatic drum suction feeder SVA/730, PCE barcode reader, double sheet control, output up to 460 folds/min., infinitely variable drive, electrical connection 400V/3Ph/50Hz, rated power consumption 1.76 kW, machine footprint approx. 1650 x 1075 mm (LxW), machine height approx. 1470 mm, machine net weight approx. 300 kg, machine in mobile version on wheels

Newbind Adventure parts, electronic and mechanical.

-Year 2005 -Suitable for Heidelberg Speedmaster 52 -Size: Max. 370x520 mm, Min. 100x100 mm -Speed: Max. 15000 /Hours -Adjustable Height -Delivery belt with adjustable speed and height

HAND CREASING & PERFORATING Equipment / further information: new tool for perforating

Height=2.23 m, Overall length= 3.38 m, Overall width= 1.6 m, Net weight= 751 kg,

Mazzoni high-performance guillotine type cutter with its own conveyor Dimensions: Mouth width 550 mm Conveyor width 1000 mm Conveyor belt width 600 mm Total length 3000 mm

Thermo pens, new and used insulated boxes, cooling and freezer boxes, warming boxes, HACCP, with AKKus, 600/400

Envelope feeder PGF Maxi Feeder; cleaned and tested; minimum. Format 100x105mm, max. 450x500mm; motorized height-adjustable; suitable for various machines. Envelope Feeder PGF Maxi Feeder; cleaned and checked; min.size 100x105mm, max.450x500mm; adjustable hight by motor; used for different machines.

Offer 25380 Specifications: - Drilling capacity in steel ST 60 40 mm - Drilling capacity in steel ST 60 50 mm - Threading in steel ST 60 to M 42 - Drilling spindle holder MK 4 - Drilling spindle stroke 200 mm - Drilling spindle speeds infinitely adjustable 40 – 1100 rpm - Right - Counterclockwise rotation - 3 feeds 0.1; 0,16; 0.25 mm/rev - Projection 350 mm - Max distance drilling spindle – table / base plate 790 / 1210 mm - Table with 2 T-slots 630 x 540 mm Height adjustable via rack with hand crank - Drive 400 V / 1.6 / 2.9 kW - Space requirement approx. W 600 x H 2050 x D 980 mm - Weight approx. 650 kg - with: - Tapping device - Keyless chuck 1-13 mm - Emergency stop button -Lighting - Coolant device

2x cross perforation cylinders 16" in good condition. Available immediately

22" Cross perforation cilinders for Muller Martini Grapha. Good condition. Available immediately.

2x Muller Martini Progress cross perforation cylinders: 1. One has gear 72 pitc 1/3” 2. One has gear 96 Pitc 1/4” Good condition, no damages. Available immediately.

TECHNICAL SPECIFICATIONS Manufacturer: ECOKRAFT Description: Pelletizing plant with two pellet pressing lines including bagging and packaging in small containers Type: Stationary Type: LP22 Year of manufacture: 2023 / Commissioning: 2024 Hours: 448 Essentially consisting of: - Hacker HA1100 for shredding coarser raw material - Discharge belt with overbelt magnet - Conveyor belt with permanent magnetic roller - Granulator SMC 500/700 - Extraction via pipe and hose lines - SMU60 filter system - 2 x MB3LX material bunkers - Dosing systems - 2 x LP22 pellet mills - 2 x conveyor belts for screening plants - 2 x FT screening plants - Bagging machine AS900 Detailed technical description on request.

Offer 25319 Specifications: - Drilling capacity in steel ST 60 35 mm - Drilling spindle holder MK 4 - Drilling spindle stroke 160 mm - Drilling spindle speeds 65 - 3250 rpm - 3 feeds 0.1 / 0.2 / 0.3 mm/rev - Projection 320 mm - Max. distance table - drilling spindle 560 mm - Table with 2 T-slots 500 x 420 mm - Height adjustable via rack with hand crank - Table left + right tiltable - Drive 400 V / 1.5 kW - Space requirement approx. W 550 x H 2200 x D 900 mm - Weight approx. 550 kg - with: - Right – Counterclockwise - Coolant device -Lighting

Injection moulding machine for PET preforms

Injection moulding machine for PET preforms

Cup printing machines

Container Size (Max.): 2,5 l