pe pipe used for sale

Manufacturer: Perske Umformer, Type: DA 12-2, Amper 1: 43, Hz 1: 50, Hz 2: 100,

Manufacturer: Perske Fräsmotor Hydrospindel, Type: Fräsmotor, Maschinennummer: KCS 72.24-2 D, aus Maschine: Homag, Amper 1: 22,5/13/20, Hz 1: 50/100/120, Power kW: 7/11, Speed rpm: 2870/5880,

Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Power: 0.6 kW 17350 rpm at 300 Hz -Voltage: 165 volts -Shaft mounting: Ø 16 mm L 10 mm -Number: 4x motors available -Price: per piece -Dimensions: 280/60/H140 mm -Weight: 4 kg

Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -1x motor: 1.5 kW 17300 rpm at 300 Hz -Shaft mounting: Collet Ø 12 mm -Dimensions: 340 x 110 x H150 mm -Weight: 10 kg

Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -1x motor: 0.15 kW 11160 rpm at 200 Hz -Saw: max. Ø 150 mm -Motor: mounted on guides -Travel distance: 320/100 mm -Dimensions: 550/250/H330 mm -Weight: 17 kg

Manufacturer: Indramat Permanent Magnetmotor , Type: MAC093C-0-FS-4HC/110-A-0/WI634LX, FREETEXT1: Atlanta Getriebe, FREETEXT2: Atlanta 5844097, FREETEXT3: P 4,25, FREETEXT4: 2,9 kg, FREETEXT5: N1 1500 U/min,

Manufacturer: Perske Fräsmotor, Type: KNS 70.12.-2-01, Btr:: 12-6,9, Schaltgr.: 50-100, Iso/kl: 3/4,4, IP: 220-380, MdN Nm: 2880/5880, Motor mit Getriebe: yes, machine ready for demonstration: Frässpindel 30 mit Keilnut 10 mm/ mit Aufsatzgetriebe für Höhere Drehzahlen/ein und Aussteuerbar,

Three-jaw chuck, three-jaw lathe chuck -screwable interchangeable jaws -Mouth size: Ø 200 mm -Weight: 12 kg

Sensor module, G2 flat module -Inputs (PNP): 4 -Voltage: 21-31 V Price: per piece -Quantity: 4 available -Weight: 0.2 kg

Manufacturer: Perske Bohrmotor mit Getriebe, Systemconfiguration: Raster 16mm, mH/Hz: 200 Hz, Output PpK= kW: 1,0 Kw, FREE TEXT: ca.60 mm hub,

Manufacturer: Perske Fräsmotor, Type: KIS 51.14.-20, Model: 2,2 kw <CRLF>, Serial number: 794997, Systemconfiguration: U/min 5650, Serial number: 35 mm Fräspindel/abgesetzt auf 30 mm, Year: siehe Bilder, Year :siehe Bilder

Manufacturer: Perske Fräsmotor mit Hydrospannung, Type: KRSV 61.13-2 D, Flange motor design: 4,5-7.5 kw<CRLF>, Foot motor design: U/min 9570-17550, Diameter mm: Hz 167-300, Bore mm: Volt 194-350,

Manufacturer: Siemens Z Achsmotor IMA Bima 410, Type: Permanentmagnetmotor , Model: 1 FT5064-1AG71-4BB0, Serial number: NoEH063 7112 01 004 VDE 0530,

Manufacturer: Siemens Permanent Magnetmotor, Type: 1 FT5076 1AF711 , Model: NOE H210 0577 S7 001,

Manufacturer: Perske Fräsmotor mit Nutenstein <CRLF>Mitnehmer, Type: KCS 71.16-2 D, Amper 1: 14,5/8,4/12, Hz 1: 50/60/120, Power kW: 4,4/6,6, pm: 2870/5870,

Reversible clamp, rotary table, rotary indexing table, rotary table, dividing head, dividing head, rotary indexing table -Model: HW 250 -Can be opened on one side -Angle display -Clamping surface: Ø 250 mm -braked -Dimensions: 300/500/H300 mm -Weight: 40 kg

Manufacturer: Perske, Type: KCS 71.16.-2 D, Amper 1: 14,5/8,4/12, Power kW: 4-6, pm: 2870/5870,

Manufacturer: Perske Fräsmotore verstärkte Ausführung, Year: VS.42.20-2, Motor mit Getriebe: 794929, Sek:: IMA, Btr:: 794929, Series: yes, Motor mit Getriebe: yes, Installation height: 133 Volt, Length mm: 200 Hz, Anschlussspindel mm: U/min 11530, Year :VS.42.20-2

Inductive sensor -Manufacturer: Pepperl Fuchs -Product Type: NBN40-L2-A2-V1 Quantity: 3 available Price: per package -Weight: 0.2 kg

Manufacturer: Perske, Type: KNS 70.12-2 D, Volt: 220/380/380, Hz 1: 50/100, Power kW: 2,2/3,3, pm: 2860/5895, Shaft dimensions L x D mm: 35 , Available: sofort,

Manufacturer: Homag , for left machine side: yes, for right machine side: yes, Number of motors: 2, Motor : Perske, kW-Leistung : 1-1,5, Volt/Hz : 220-380/50-100, Drehzahlen U/min : 2670/5710, Siko Anzeige : yes, Horizontal Rollentastung : no, Pneumatically controlled: no, Shaft dimensions L x D mm: 30, Slewable vertically: yes, Motor 2: Perske, kW-output 2: 1,5, Volt/Hz 2: 220-380/50-100, Speed rpm 2: 2670/5710, Silo indication 2: yes,

Absolute rotary encoder, incremental rotary encoder with solid shaft -Type: BVS58N-011AVR0NN-0013 -Factory no.: 113845 -No.: 0425903 -Quantity: 3 available -Price: per package -Weight: 0.5 kg

Key data: 390 KW

Perkins 4008TESI-LC Containerised Natural Gas Cogeneration Plant. Hours: 0 Voltage: 400 V Scope of supply: Complete Cogeneration plant in container, gas heat exchanger, Control Panel WOODWARD EASY GEN 3000. Available for sale from Gas Engine Exchange . Please check our full range of equipment at gasengineexchange.com.

pressure: . t square measurement: 55 mm diameter: 63 mm flat material: 170x20 mm total power requirement: kW weight of the machine ca.: t The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. format 78 x 115 cm Year of construction 2002 MC Control Counting device MCC 3 Round stack feeder Dual feed 6 fold pockets in the parallel fold section Downstream knife shaft Window rebate bag Vertical stack delivery Delivery date: immediately Price on request. We supply and install worldwide.

Key data: 201 KW, 235 kVA, 400 V

Net price: 16.500,- € Gross price: €19,635.- - - - - - Volvo generator set 235 kVA Year of construction 2013 - only 50 hours - - - - - Engine: - Volvo Penta (Made in Germany) - Model: TAD 733 GE - 6 cylinders -Turbo -Diesel -Water-cooled - 1500 rpm - Power: 270 hp - - - - - Generator - Manufacturer: MeccAlte - 225 / 237 kVA - 230 / 400 volts - 50 Hertz - - - - - Control / Control cabinet - Incl. power section and switching - With Kuhse control - Automatic start function - Hand start at the touch of a button - Generator monitoring: volts, amps and hertz display - Engine monitoring: engine temperature, oil pressure, battery voltage - - - - - Condition: - The generator is a pure emergency system - It was used for emergency power backup in a factory and has only run for 50 hours of operation - Regular maintenance and test runs were c ...

Overhauled: 1999 Shear force: 2000KN Cycle rate: 59/min Achievement; Round steel up to D 63 mm, square steel up to 55 mm Machine weight: 7350 kg Dimensions:2260 x 2920 x 1770 mm Hewvu Nev Ta Ucju Isk Bar feeder with separation: Max. pole length: 6m Dimensions: 6.3 x 1.75 x 2.25 m Weight: 4000 kg Machine is still energized.

Offer 22188 Specifications: - Height-adjustable roller conveyor with spring support and locking mechanism - With clamping lever - Roller conveyor length approx. 3000 mm -Min. Roller conveyor height approx. 640 mm - Max. roller conveyor height approx. 1190 mm - Roll width outside approx. 260 mm - Roll diameter approx. to max. 100 mm - max. possible number of rolls 13 pcs - 10 pieces of rollers are built-in - Total width of the roller conveyor approx. 500 mm - Total length approx. 3200 mm - Weight approx. 250 kg

Perkin Elmer Clarus 500 with autosampler and 2 x FID, currently serviced

Sensor module, G2 flat module, safety switching device -1x: HR-121126 -1x: VAA-4E-KF2-ZE -3x: KFA6-ER-16 Price: complete -Weight: 3 kg

; Power [PS]: 24; Gross weight [kg]: 650; Engine: Perkins 404J-22G; Accessories: Tanker, Battery, Control Panel, Stahldach, Including sockets:, - CEE 32A - 400V - 5P, , You can also order this Generator with a Leroy Somer or Stamford Alternator., Prices when changing Generator options may differ from the price online.; Water Tank Volume [l]: 70

Size: 800 x 600 mm Equipments: Max. Load capacity: 1000 kg Max. Dimension: 800 x 600 mm

Quick-release clamp, quick-release chuck, drilling jig, machine vice, drill press vice -Clamping surface: 65 x 35 mm -Clamping height: max. 40 mm Price: per piece -Quantity: 2 available -Dimensions: 120/80/H70 mm -Weight: 1.5 kg

Frequency converter, frequency transformer, drive converter, controller, variable speed drive -Input: 380 V 4.2 kW -Output: 133 V 200 Hz -Power output: 6 kVA -for: Edge bander, edge banding machine -Weight: 115 kg

Max. punching and shearing capacity: 400 kN For example, punches 20 mm holes in 15 mm steel Shears on the flat steel shear on 120 mm to 12 mm steel Further technical data on request With an assortment of stamps and dies as desired

Over 80 years experience in maintenance., Expert that jointly reflects on the ideal solution for your situation., 1,000 hours or one-year guarantee: optimal reliability., Available 24/7., Quickservice., We can always supply a replacement generator., Wide range of stock that can be supplied immediately.; Transport weight [kg]: 24553; Gross weight [kg]: 24553; Engine: 4016-61 TRG3; Accessories: Product features:, Drip-tray, Switch board, Volt meter, Amp meter, Hertz meter, Start battery, Exhaust system

Over 80 years experience in maintenance., Expert that jointly reflects on the ideal solution for your situation., 1,000 hours or one-year guarantee: optimal reliability., Available 24/7., Quickservice., We can always supply a replacement generator., Wide range of stock that can be supplied immediately.; Transport weight [kg]: 14000; Gross weight [kg]: 14000; Engine: 4016 TWG2; Accessories: Product features:, Drip-tray, Exhaust system

Frequency converter, frequency transformer, drive converter, controller, variable speed drive -Input: 380 V 5.5 kW -Output: 133 V 200 Hz -Power: 7.5 kVA -for: Edge bander, edge banding machine -Weight: 105 kg

Separating tool, punching tool, punch, punching die, punching punch, gill forming tool -Punching tool for: holding matrices -Bore diameter: 70 mm -Dimensions: 220/317/H115 mm -Weight: 32 kg

3 Pieces Container Units with Diesel Engine Engine Type: Perkins 4016-61 TRG2 Year: 2023 Hours: 2 Power: 2000 kVA Cooling: Water, Radiator Speed: 1500 1/min Tank: approx. 2000 litres Generator: Stamford HVSI804R Voltage: 10 kV, 50 Hz Excellent condition, like new! Was used as an emergency power system. Subject to prior sale - errors possible! Internal reference number: E-1004-97

; Gross weight [kg]: 2025; Engine: Perkins 1106A-70TAG3; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 224

Size: 480 x 650 mm Equipments: 1 X Inking Unit 1 X Numbering Shaft 2 X Mounting Rings 2 X Linear Perforating Arms

; Gross weight [kg]: 1195; Engine: Perkins 1103A-33TG2; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : 125A - 63A - 32A - 16A; Water Tank Volume [l]: 87

We offer Peri Trio formwork accessories, used Balancing latch TAR 85, 65% discount on new price for 68,08EUR net 405 x Balancing Bolt TAR 85 a 68,08EUR You are bidding on 1 piece Prices are excl. VAT and transport Subject to sale If you have any questions, please contact Mr. Becker at 0176-700 44689 Purchase and sale of scaffolding, formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Office warehouse address: Birkenstraße 15 89185 Humlangen- Hüttisheim Ulm Registration Court: HRA722943 VAT ID NUMBER: DE279047055

Size: 520 x 740 mm Equipments: 1 cam left and right 2 X Mounting Rings 2 Perforating arm 1 X Inking Unit 1 X Numbering Shaft

Size: 520 x 740 mm Equipments: suitable for Heidelberg, Komori, KBA, Manroland, Ryobi, Sakurai as is Easy installation and removal

Key data: 500 mm

Double mitre saw Pertici Type: UNIVER 502D2 Year of Make: 1998 Cutting of aluminium and PVC profiles Cutting length 360 – 6000 mm Cutting width max. 150 mm Cutting height max. 350 mm Saw blade diameter D 500 mm Saw blade revolutions 2800 rpm. Saw blade bore d 30 mm Saw blades swivel from 90° to 45° to 0° Motor powers: 2.2 + 2.2 kW Connected load 4.5 kW, 380 volts 50Hz Automatic feed and cutting process Saw automatically moves to the entered dimension and cuts automatically Control panel with digital display for cutting dimension was used for cutting aluminum square tubes in the Windows and conservatory construction Good working condition, exact cut Dimensions 7200 mm x 1200 mm x H 1700 mm Weight: 1980 kg

1 aseptic filling Krones PET bottle filling line for bottles with a capacity of 1,500 ml, capacity 20,000 pieces/hour Year of construction 2005, No. 564-045 With sterile tank, capacity 7,500 l with sleever machine on the 1st floor above with Krones bottle cap conveyor. with Krones labeller, built in 2005 with various spare parts, but without PET blow bottles technology and without PTT bottles carton packing machine