pe pipe head used for sale

Key data: 48 KW, 60 kVA, 400 V

On hand Perkins Engine Stamford Alternator ComAp Control ABB Disconnect Switches Generator Set Specifications: Model No.: EQ-P6048 Continuous power (Prime Rating): 60 kVA / 48 kW Emergency power (standby rating): 66 kVA / 53 kW Voltage: 400/230V Frequency: 50 Hz Speed: 1500 rpm Engine Specifications: Engine Brand: Perkins Engine Model: 1103A-33TG2 Bore x Stroke (mm): 105 x 127 Displacement (L): 3.3 Compression ratio: 17.3:1 Intake system: turbocharging & intercooler Fuel System: In-line Injection Regulator Type: Mechanical Dimensions of the generator set: Length: 2220 mm Width: 960 mm Height: 1258 mm Weight (open): 1085 kg Standard: 4-stroke, 1500 rpm, water-cooled robust diesel engine Leroy Somer Generator ABB Circuit Breakers Protection system in manual operation Flexible oil hoses and oil drain valve Preheater Lubricating oil and antifr ...

Key data: 24 KW, 30 kVA, 230 V

In stock now 30 months warranty Original Stamford alternator and ComAp control Power Generator Specifications: Model No.: EQ-P3024 Prime Rating: 30 kVA / 24 kW Standby Rating: 33 kVA / 26.4 kW Voltage: 400/230V Frequency: 50 Hz Speed: 1500 rpm Engine Specifications: Engine Make: Perkins Motor Model: 1103A-33G Bore x Stroke (mm): 105 x 127 Displacement (L): 3.3 Compression Ratio: 19.25:1 Charging: Turbocharged & Intercooler Fuel System: In-line Injection Pump Regulator Type: Mechanical Dimensions of the unit: Length: 1800 mm Width: 750 mm Height: 1250 mm Weight open: 740 kg Standard: 4-stroke, 1500 rpm, water-cooled high-performance diesel engine Leroy Somer Alternator ABB Circuit Breakers Manual operation protection system Flexible oil lines and oil drain valve Heater Lubricating oil and antifreeze Batteries and cables Electrostatically pa ...

150 ton x 4000mm

Motor Perkins 704.30 # UA80973U857134J completely overhauled replacement engine incl.3.PTO finish without starter + alternator, flywheel. All wear parts renewed incl. Engine test run. 12 months warranty

Spindle diameter 2,000 mm Turnerable diameter 2,000 mm MACHINE IN MECHANICAL/ELECTRIC RETROFIT PHASE

We offer Peri Maximo 270 and 330 elements 455.67m² as follows: All elements are cleaned, checked and partly covered with new, original Peri Finply formlining. All elements sealed with zinc phosphate coating corrosion. New value PL 2025 approx. 255105,00€ Special net price 97327,00€ 16 Element MX 15 FPly 330x240 6 Element MX 15 FPly 330x120 New Plate 3 Element MX 15 FPly 330x90 New Plate 2 Element MX 15 FPly 330x90 3 Element MX 15 FPly 330x60 3 MZ-Elem. MXM 15 FPly 330x60 new plate 3 MZ-Elem. MXM 15 FPly 330x60 1 Element MX 15 FPly 330x45 New Plate 3 Element MX 15 FPly 330x30 New Plate 7 Element MX 15 FPly 330x30 3 I-corner MXI 15 FPly 330x50/20 new plate 1 I-corner MXI 15 FPly 330x60 11 Element MX 15 Fply 270x240 New Plate 16 Element MX 15 Fply 270x240 3 Element MX 15 Fply 270x120 New Plate 8 Element MX 15 Fply 270x120 3 Element MX-2 15 FPly 270x60  ...

Ø plateau: 1250 mm Top speed: 500 rpm - 2 ranges Ø false plateau: 1450 mm Maximum piece: 1550 mm Maximum height of the piece: 1200 mm RAM stroke: 800 mm Crossbar stroke: 850 mm Tool warehouse: 10 ATC CNC Siemens 810 D

for 60-80 kg batches, product-dependent copper kettle Diameter 950 mm, depth approx. 550 mm opening diameter 600 mm, electrically tiltable, already checked, fully fine. Dimensions: 1270 x 1100 x 1600 mm high Weight approx. 300 kg

Engine Brand: PERKINS, Conditie: NEW, , https://www.hamofa.com/stock/diesel-engines/perkins-1506a-e88tag1-new/ 42295, , = More information =, , Type: Engine, Type number: 1506A-E88TAG1

; Power [PS]: 2039; Gross weight [kg]: 20560; Engine: Perkins 4012-46TAG3A; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 2000

round bar steel: 50 mm square edge steel: 40 x 40 mm L-beam: 140 x 13 mm Punch power: 900 kN hole punching press: throat: 510 mm hole punching press: max. length of stroke: 29 mm hole punching press: capacity (dia. x thick.): 31 x 20 mm notching: l + T material: 80 x 14 mm no. of strokes: 40 / 45 Hub/min total power requirement: 4 kW weight of the machine ca.: 3,7 t dimensions: 2,1 x 0,7 x 2,12 m Accessories: various punches and dies The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

spindle diameter: 90 mm x-travel: 900 mm y-travel: 900 mm z-axis: 1200 mm w-axis: 800 mm table surface area: 900 x 1200 mm rotation movement: 360 Grad table load: 6,0 t turning speeds: 25 - 1400 U/min spindle taper ISO: 40 voltage: 380 V / 50 Hz drive milling spindle: 9,2 kW total power requirement: 35 KVA weight of the machine ca.: 10 t dimensions of the machine ca.: 4,5 x 2,8 x 2,5 m • Machine had been completely refurbished in 1994 by the manufacturer • new switch cabinet, • new Servo-drive BOSCH and HEIDENHAIN-control TNC 360, • radial face slide Ø 600 mm. traverse distance: 150 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

; Gross weight [kg]: 746; Engine: Perkins 403D-15; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 63A - 32A - 16A 5P - 16A 3P; Water Tank Volume [l]: 55

; Gross weight [kg]: 22100; Engine: Perkins 4016-TAG2A; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 2000

; Gross weight [kg]: 7970; Engine: Perkins 4008TAG3; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 1450

saw blade diameter: 300 mm capacity 90 degrees: round: 102 mm capacity 90 degrees: square: 90 mm capacity 90 degrees: flat: 120x80 mm capacity 45 degrees: round: 90/80 mm capacity 45 degrees: square: 80/70 mm capacity 60 degrees: flat: 90x70/85x70 mm total power requirement: 1,5/2,0 kW weight of the machine ca.: 0,135 t dimensions of the machine ca.: 0,5 x 1,05 x 1,0 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

; Gross weight [kg]: 16780; Engine: Perkins 4012-46TAG2A; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 2000

; Gross weight [kg]: 9780; Engine: Perkins 4012-46TAG2A; Accessories: Tanker, Control Panel; Water Tank Volume [l]: 2000

; Gross weight [kg]: 10500; Engine: 4012-46TAG3A; Accessories: Tanker, Control Panel; Water Tank Volume [l]: 2000

spindle diameter: 110 mm x-travel: 4000 mm y-travel: 2000 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Stocknumber 1210014 Type of machine Floortype Boring Machine Make PEGARD Type AF11 Type of control Conventional Spindle diameter 110 mm X-stroke (mm) 4000 Y-stroke (mm) 2000 Z-stroke (mm) 300/750 Table dimensions (mm) 1200 x 1600 mm Table rotation (degrees) 360 Tool Taper Iso 50 Speeds (Rpm) 4 - 1000 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

; Gross weight [kg]: 12270; Engine: Perkins 4008TAG3; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 1450

; Gross weight [kg]: 8950; Engine: Perkins 4006-23TAG3A; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 1360

Manufacturer: ESC – Europa-Siebdruck-Centrum GmbH & Co. KG Model designation according to nameplates: PAJD 1100-2C/IR and Perfection 1100 2C/IR Year of manufacture according to nameplates: 2016 and 2017 Machine/Factory Numbers: 9960-14-1065 / 11661 Electrical connection: 400 V, 50 Hz Rated current: 120 A (nameplate PAJD) Nominal power: 76 kW (Perfection nameplate) Degree of protection: IP40 Belt type: IR temperature tunnel with conveyor belt (width according to series: 1100 mm) Assembly: IR drying system for screen printing or varnishing processes Design: Closed safety enclosure with access doors Application: Drying/shortening of printed or coated components Location: Schierling Viewing possible by appointment.

; Gross weight [kg]: 1825; Engine: Perkins 1106A-70TAG2; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 185

Dimensions (L/W/H): 0x0x0 mm Weight: 300 kg Total power requirement: 5,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Flame Perkin Elmer mod. AAnalyst 200 Including: Air-Acetylene burner Controlled with LCD touchscreen Refurbished

Dimensions (L/W/H): 0x0x0 mm Weight: 290 kg Total power requirement: 4 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

; Gross weight [kg]: 2580; Engine: Perkins 1206-E70TTAG3; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: coolant heater and battery charger, Including: sockets 63A - 32A - 16A 5P - 16A; Water Tank Volume [l]: 380

A used bread slicer Treif Pegasus 2602 from 1997 is currently for sale and immediately available in our warehouse in Bielefeld. Bread slicer Treif Pegasus 2602 - Bread slicer without oiling - for long loaves of bread - completely in stainless steel - with cress knife - can be driven on castors - Year of construction 1997

PINETTE PEI Vertical compression press 1500T SMC, closing force 1500T

Hand lever plate shears and profile steel shears Knife length 400mm Cuts sheets up to 5mm Cuts round steel up to 13mm Heavy and stable design with foldable storage table. Mounted on base More hand lever plate shears in stock, also for round steel and profiles!

; Gross weight [kg]: 9896; Registration Number: 1; Engine: Perkins 4008-30TAG3; Accessories: Tanker, Battery, Control Panel, Stahldach, Including ATS System for Automatic start/stop when the grid fails.; Water Tank Volume [l]: 2060

305m2 Peri Trio 3.30m Peri TRIO is a cranable formwork system that can be used standing or lying down. With the patented BFD alignment lock, all element connections are made flush, flush and tight.  The only necessary connecting part for normal element joints, outside / inside corners, hinged corners, fitting timber compensations up to 10 cm or the clamping of squared timber is the alignment lock BFD (can be operated with one hand).  All floor plans can be formed with just a few element widths.  The powder coating prevents the concrete from sticking and enables quick and easy cleaning.  Maximum permissible fresh concrete pressure: 80kN /m2

Perkin Elmer Chemagic 360-D Nucleic Acid Extraction System The Perkin Elmer Chemagic 360-D is an automated benchtop system for the isolation of nucleic acids (DNA and RNA) from a wide range of sample materials. It uses Chemagen's magnetic bead technology to extract high-purity nucleic acids for various downstream applications. Key Features and Specifications Technology: The system is based on the patented Chemagen M-PVA magnetic bead technology. Metal rods are magnetized to collect the beads containing the bound nucleic acids and transfer them between different process solutions, minimizing cross-contamination. Sample Volume Flexibility: It offers different "Rod Heads" for different volume ranges and throughputs: 12-Rod Head: For sample volumes from 1 mL to 10 mL. 24-Rod Head: For sample volumes from 200 μL to 4 mL. 96-Rod Head: For sample volumes from 10 μL to 400  ...

Treif bread slicer Type: Pegasus Sichelmesser Machine Cutting width: 4 – 14 mm adjustable analog control Stainless steel cladding 380V 50Hz Height: 120cm Width: 100cm Depth: 80cm

Compact device for automated nucleic acid purification The Perkin Elmer Chemagic 360 is an automated benchtop system for isolating nucleic acids (DNA and RNA) from a wide range of sample materials. It uses Chemagen's magnetic bead technology to extract high-purity nucleic acids for various downstream applications. With dimensions as small as 80 x 80 cm and its unique sample volume flexibility, the Chemagic 360 is an innovative instrument that can be adapted to almost any of your nucleic acid purification needs. Utilizing the proven M-PVA Magnetic Bead technology, the Chemagic 360 delivers high yields of high-purity nucleic acids suitable for a wide range of downstream applications such as NGS, MLPA, genotyping, and PCR. Features at a glance • Optimized design to avoid cross-contamination • Sample volume from 10 μl - 10 ml • Throughput from 96 to 4000 samples per  ...

Machine Type: Honing Machine Manufacturer: Pemamo Type: MDR 120 E Year of construction: 1999 / Commissioning 2003 Condition: used / very good Offer will only be sent if a complete imprint is provided! Price 2.850 Euro incl. 19% VAT Fixed Price Location Warstein , Germany Reference number M-PEM-0126 DESCRIPTION We offer you a used honing machine from the manufacturer Pemamo. Incl. adapters 1040-510 and 1040-11-20 see last picture With fine adjuster. Weight: 135kg Further dates will follow. Availability: immediately Our offer is aimed at tradespeople who are registered within the meaning of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions of payment. Errors in the descriptions and offers are reserved

Key data: 4 KW, 230 V

Inverter generator set 4 kW - NEW DUAL Fuel - Gasoline / Gas - Power: 4 kW (petrol operation) - Power: 3.8 kW (gas operation) - Voltage: 230 volts - Frequency: 50 Hertz - Inverter technology - Tank capacity: 8.3 liters - Consumption: 1.5 liters/hour (50% load) - Dimensions (L/W/H): 59 x 45 x 51 cm - Weight: 48 kg - Socket: 2x 230V Schuko - USB port / socket - 12V socket for charging the battery - ATS connection - Overload protection - Low oil level warning - Wheelset and fold-out handle for pulling - Electric - Start and Cable - Start - Digital display (volts / hertz / hours / kW) ---> 2 identical inverters can be connected and synchronized to obtain a total output of 8 kW. - - - - - Advantages of an inverter generator set: The inverter technology ensures a permanently constant voltage, so that even sensitive devices can be operated without any problems ...

BaumannPerfecta 115 Age: 2022, installed 12/2022 Available: April 2026 • 24" tiltable color display touch screen • Process visualization, real time Animation and displaying half and full finished jobs • Program steps in self‐explaining list • Electronically adjustable backgauge speed and clamp pressure • Automatic clamp pressure adjustment • Pre‐selectable clamping time extension‐ 0 to 9,9 seconds • Integration of Prepress data CIP3/CIP4 from existing customer workflow (option) • Structure of the surface in simple operating mode, list mode, graphic mode • Password protected user accounts • Comprehensive diagnosis / service area Cutting table width [mm] 1150 Rear table length [mm] 1150 Maximum clamp opening [mm] 165 Smallest cut/ with false clamp [mm] 20/77 Backgauge return speed [mm/s] 300 Cclamping force [kN] 2.5‐45 Safety p ...

; Gross weight [kg]: 1430; Engine: Perkins 404J-22G; Accessories: Tanker, Battery, Control Panel, Stahldach, - Super silent enclosure, - Socket 32A, - Coolant heater and battery charger; Water Tank Volume [l]: 500

; Gross weight [kg]: 4550; Engine: Perkins 2206C-E13TAG2; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 580

; Gross weight [kg]: 1496; Engine: Perkins 1104C-44TAG2; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 63A - 32A; Water Tank Volume [l]: 120

; Gross weight [kg]: 1232; Engine: Perkins 1104A-44TG1; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : 125A - 63A - 32A - 16A; Water Tank Volume [l]: 87

Film wrapping machine with infeed conveyor, stacking device, outfeed conveyor with 90° curve and other outfeed conveyor 90° to the machine. PLC: SCHNEIDER. Output: 60 bundles/min.

; Gross weight [kg]: 1666; Engine: Perkins 1106A-70TG1; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 185

; Power [PS]: 699; Gross weight [kg]: 8425; Engine: Perkins 2806D-E18TAG1A; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Coolant heater and Battery charger; Water Tank Volume [l]: 975

; Power [PS]: 562; Gross weight [kg]: 4583; Engine: Perkins 2206C-E13TAG3; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 800

round bar steel: 25 mm square edge steel: 22 mm L-beam: 70 x 7 mm cutting capacity: 100 x 10 mm plate thickness: 10 mm total power requirement: 1,3 kW weight of the machine ca.: 0,6 t dimensions of the machine ca.: 1,1 x 0,65 x 1,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

MAN cylinder liner, for engine 28/32 Part number: 1152579