pe pipe head used for sale

Permanent magnet motor, permanent magnet motor, electric motor, permanent magnet motor, permanent magnet motor, servo motor -Power: 1.8 kW -Speed: 2000 rpm -Voltage: 167 V -Holding brake: EBD 2M 24V-23W -Shaft: Ø 24 x 50 mm -Number: 1x motors available -Price: per piece -Dimensions: 460/140/H185 mm -Weight: 25 kg/piece

Permanent magnet motor, permanent magnet motor, electric motor, permanent magnet motor, permanent magnet motor, servo motor -Manufacturer: Indramat, motor comes from machining center Werner TC 2.6K -Type: MAC112A-0-LD-2HC / 130-AO -Speed: 3000 rpm -Shaft: Ø 32 x 60 mm -Dimensions: 370/195 / H250 mm -Weight: 25 kg

Permanent magnet motor, permanent magnet motor, electric motor, permanent magnet motor, permanent magnet motor, servo motor -Manufacturer: Rexroth / Indramat, the motor comes from the Werner TC 2.6K machining center -Type: MAC112A-0-LD-2HC / 130-A-1 -Speed: 3000 rpm -Shaft: Ø 32 x 60 mm -Brake: 14 Nm -Dimensions: 385/192 / H240 mm -Weight: 26 kg

Permanent magnet motor, permanent magnet motor, electric motor, permanent magnet motor, permanent magnet motor, servo motor, permanent magnet main drive motor -Manufacturer: Indramat, permanent magnet main drive motor from machining center Werner TC 2.6K -Type: MAC112B-O-GD-2HC / 130-AO -Power: 3.55 kW -Speed: 2750/6000 rpm -Shaft: Ø 32 x 60 mm -Dimensions: 445/195 / H245 mm -Weight: 38 kg

Permanent magnet motor, permanent magnet motor, electric motor, permanent magnet motor, permanent magnet motor, servo motor, permanent magnet main drive motor, asynchronous main drive motor, spindle motor, permanent magnet three-phase servo motor -Manufacturer: Indramat, permanent magnet three-phase servo motor -Type: MAC090C-O-GD-2-C / 110-AO / S001 -Speed: 3000 rpm -Shaft: Ø 24 x 50 mm -Dimensions: 455/140 / H195 mm -Weight: 22 kg

Permanent Magnet Motor, Permanent Magnet Motor, Electric Motor, Perm.Magn-Mot, Perm Magnet Motors, Servo Motor -Power: 1.33 kW -Voltage: 171 V -Speed: 2000 rpm -Shaft: Ø 19 mm -Design: B5 -Protection class: IP 44 -Number: 1x motor available -Dimensions: 465/120/H240 mm -Weight: 20 kg

Permanent Magnet Motor, Permanent Magnet Motor, Electric Motor, Perm.Magn-Mot, Perm Magnet Motors, Servo Motor -Power: 1.03kW -Voltage: 176V -Speed: 2000 rpm -Shaft: Ø 19 mm -Type: B5 -Protection class: IP 44 -Number: 1x motor available -Dimensions: 385/120/H180 mm -Weight: 15kg

Permanent magnet motor, permanent magnet motor, electric motor, permanent magnet motor, permanent magnet motor, servo motor -Power: 1.8 kW -Voltage: 167 V -Speed: 2000 rpm -Shaft: Ø 24 mm -Construction: B5 -Protection class: IP 44 -Number: 2x motors available -Price: per piece -Dimensions: 140/215/H505 mm -Weight: 30 kg

Permanent magnet motor, permanent magnet motor, electric motor, permanent magnet motor, permanent magnet motor, servo motor -Power: 38 Nm -Voltage: 286 V -Speed: 2000 rpm -Power: 46 Nm -Voltage: 143 V -Speed: 1000 rpm -Shaft: Ø 38 mm -Construction: B5 -Protection class: IP 64 -Dimensions: 450/190/H240 mm -Weight: 39 kg

Permanent magnet motor, electric motor, servo motor, geared motor, three-phase motor -Manufacturer: Siemens, Permanent Magnet Motor from CNC milling machine Mikron WF 51C/155 -Type: HU3074-,0AC01-Z -Voltage: 167 V -Power: 1.8 kW -Speed: 2000 rpm -Shaft: Ø 22 x 45 mm -Number: 2x motors available -Price: per piece -Dimensions: 390/140/H185 mm -Weight: 23 kg/pc.

Centrifugal pump, water pump -Manufacturer: gwk, self-priming centrifugal pump type WP 60 -Motor: 0.55 kW 2800 rpm -Pump: Speck Pumps -Max. Flow rate: 45 l/min -Max. Delivery height: 55 m -Quantity: 1 pieces available -Price per piece -Dimensions: 280/140/H150 mm -Weight: 10.8 kg/pc.

Gratings, gratings, light grilles, insert grilles, insert grilles, stair steps, safety steps, grating steps, steps, perforated gratings -Grid level: perforated grid 1100 x 270 mm -Total height: 75 mm -Holes: Ø 7/13 mm -Gratings: Hot-dip galvanized -Quantity: 2x grids available -Price per piece -Weight: 7 kg/piece

Gratings, gratings, light grilles, insert grilles, insert grilles, stair steps, safety steps, grating steps, steps, perforated gratings -Grid level: perforated grid 1000 x 270 mm -Total height: 75 mm -Holes: Ø 7/13 mm -Gratings: Hot-dip galvanized -Quantity: 2x grids available -Price per piece -Weight: 7 kg/piece

Gratings, gratings, light grilles, insert grilles, insert grilles, stair steps, safety steps, grating steps, steps, perforated gratings -Grid level: perforated grid 800 x 270 mm -Total height: 70 mm -Holes: Ø 8/12 mm -Gratings: Hot-dip galvanized -Quantity: 2x grids available -Price per piece -Weight: 5,8 kg/piece

Gratings, grating, light grilles, insert grilles, insert grilles, stair steps, safety steps, grating step, step, perforated grating -Grating level: perforated grating 1000 x 300 mm -Total height: 70 mm -Holes: Ø 7/13 mm -Gratings: hot-dip galvanized -Quantity: 1x piece available -Weight: 7.2 kg

High-performance grinding spindle, internal grinding machine, internal grinding device, internal grinding spindle -Handover: in current condition as viewed -Condition: without grinding spindle -Grinding spindle for: Lathe -electric: operated -Motor: VEM 0.75 kW -Bracket: Ø 80 mm -Dimensions: see photos -Total dimensions: 600/370/H350 mm -Weight: 60 kg

Four-rope orange peel grapple, polyp grapple, mechanical orange peel grapple, shell grapple, ship unloading grapple, scrap grapple, garbage grapple, rope grapple, digging grapple -Manufacturer: LAUDI GVE -Type: Four-rope orange peel grapple type 6.3 m³ -Condition: unused -Accessories: 3 replacement arms for the gripper, see pictures -Max. payload: 5600 kg -Height of the closed gripper: 3400 mm -Height of the open gripper: 3900 mm -Width of closed gripper: 3380 mm -Opening width: 4660 mm -Rope length in closed gripper: 8600 mm -Rope length in the open gripper: 17250 mm -Transport dimensions disassembled: 2460/5020/H2500 mm -Weight: 5500 kg

ASPARAGUS PEELER, CHRISTIAENS AGRO SYSTEMS, TYPE: 1350-6 Technical description: Machine number: 062 906 Heads number: 6 Power supply: 380-440V/50-60 Hz Dimensions: 1650 x 2000 x 1600 mm

Height=2.08 m, Overall length= 2.05 m, Overall width= 1.35 m, Net weight= 215 kg,

Height=1.45 m, Overall length= 2.44 m, Overall width= 7.6 m, Net weight= 205 kg,

A total of 5 material separators a vacuum pump with filter incl. control bus system ( Wittmann ) 2 Koch dry air generators 2 L-bands 1 separating drum

Heidolph Pumpdrive PD 5206 Peristaltic Pump 1 Channel Motor speed: 24 to 600 rpm Flow rate: 1.3 to 3.9 mL/min Weight 7.7 kg With HEIDOLPH SP QUICK single-channel pumphead In excellent condition Year of Manufacture: 2006

Eppendorf Mastercycler 5332 Personal PCR Thermal Cycler Temperature range: 4°C - 99°C Temperature distribution: 95°C ± 1.0°C Temperature accuracy: ± 0.2°C Sample capacity: 25 x 0.2 mL tubes or 16 x 0.5 mL tubes

Offer 26119 Technical data: - Drilling performance in steel ST 60 30 mm - Drilling spindle holder MK 3 - Drilling spindle stroke 125 mm - Drilling spindle speeds infinitely variable 80 - 3200 rpm - Tapping option by reverse / counterclockwise rotation up to M 20 - Projection 260 mm - Max. distance table - drilling spindle 825 mm - Table with 2 T-slots 500 x 360 mm - Height adjustable via rack with hand crank - Drive 400 V / 0.8 / 1.5 kW - Space requirement approx. W 500 x H 1900 x D 950 mm - Weight approx. 230 kg - Cross table with handwheels

Code: 0367 Brand: STROMAB Model: PS/50 F - CE Standard Manual pendulum saw for cutting boards, wooden packaging, furniture, window and door frames, sawmills, and various - CE Standard Blade diameter 500 mm Hole 30 Blade speed 2800 rpm Motor 7,5 Hp Cutting capacity mm 510 Cutting depth mm 145 Manual feed Infeed roller table mm 2000 Outfeed roller table mm 2000 Suction inlet diameter mm 150 Weight kg 350

- electr. grooving and perforating machine - with the existing accessoies

25 valves Filler Bertolaso for PET and glass (18 mm, hot filling ecologic with HEPA filter) (1998) Capacity: approx. 6000 bph different format parts Optional ID6103 - 24 grippers Rinser Procomac for PET and glas ID6011 - Screw capper Bertolaso 28 mm for PET (Plastic) (1998) with screw cap feeding

Pendulum saw/cross-cut saw type PS 50/F built in 2025 with support table As good as new, never used cross-cut saw with support table re/li total 2,700 mm, incl. 2 x rollers. Saw blade diameter 500 mm. Cross-cut depth max.: 145 mm, cross-cut width max. 510 mm 5.0 kW drive power

Height=1.19 m, Overall length= 0.74 m, Overall width= 0.67 m, Net weight= 89 kg,

Height=0.76 m, Overall length= 0.6 m, Overall width= 0.52 m, Net weight= 40 kg,

ASB 50MB V2 injection blow molding machine Year : 2005 Working hours : 59 000h The machine is well maintained Injection Clamping force: 60 kN. Screw diameter: 44 mm. Cavity Number: 1-6 . Capacity max.: 0,03 l- 2,5 . Thread Diameter max.: 17 - 63 mm. Neck Diameter max.: 15 -60 mm. Support Ring Diameter max.: 17 - 63 mm. Body Diameter max.: 35 - 115 mm. Width Parting Line max.: 35 - 145 mm. Height max.: 150 - 300 mm. Weight max.: 22g - 129 g. Injection volume: 1532 cm³. Blow Clamping Force: 78 kN. Oil tank capacity: 250 l. Dimensions : 3.768 x 1.170 x 2.910 mm. It has a completely new pump motor and pump. + auxiliary equipments

ASB 50MB V2 injection blow molding machine Year : 2006 Working hours : 30 000h The machine is well maintained Injection Clamping force: 60 kN. Screw diameter: 44 mm. Cavity Number: 1-6 . Capacity max.: 0,03 l- 2,5 . Thread Diameter max.: 17 - 63 mm. Neck Diameter max.: 15 -60 mm. Support Ring Diameter max.: 17 - 63 mm. Body Diameter max.: 35 - 115 mm. Width Parting Line max.: 35 - 145 mm. Height max.: 150 - 300 mm. Weight max.: 22g - 129 g. Injection volume: 1532 cm³. Blow Clamping Force: 78 kN. Oil tank capacity: 250 l. Dimensions : 3.768 x 1.170 x 2.910 mm. The pumps have been replaced with new ones. + auxiliary equipments

Platform Base for Fortuna Roll Presses Mobile Stationary Suitable for Fortuna automatic roll presses and other manufacturers (Fortuna semi-automatic, fully automatic machine, size 3/4) With deep heavy-duty castors or stationary as required With screw-on thread Made of solid stainless steel plate

Overview This complete filling line for non-returnable PET bottles was manufactured 2004 by the german manufacturer KRONES. The line was running as a non returnable bottle filling line. The line is designed for high-capacity beverage production, handling up to 12,000 b/h and is in a good condition.    Technical Data Capacity: 12,000 bph (at 1,5L); 14,000 bph (at 0,5L)  Filling product: carbonated water and soft drinks with 15°C and 8,0 g/l CO2 Bottle Formats: 0,5L and 1,5L PET CSD Cap Formats: PCO 1810 Contiroll labelling station 2-3-340 for wrap-around label from a reel with hotmelt and 2 x cold glue labelling station 8-8-130 for paper label Packaging formats: shrink wrapping with/without carry handle (3x2) Pallet: 4 x ¼ Plastic pallet (600 x 400 mm); 2 x Half-size pallet (800 x 600 mm) on Euro pallet (1.200 x 800 mm)  Application: CSD Hygienic design condition: good technical con ...

Table Press - Perforated Plate Press Table size - work area incl. cylinder approx. 140 x 90 cm Cylinder 3x Pneumatic

Offer 26144 Technical data: - Drilling capacity in steel ST 60 40 mm - Drilling capacity up to 45 mm - Tapping device up to M 36 - Feeds infinitely adjustable - Drilling spindle holder MK 4 - Drilling spindle stroke programmable up to 175 mm - Drilling spindle speeds infinitely variable 30 - 2400 rpm - Projection 300 mm - Table with 2 T-slots 600 x 500 mm - Height adjustable via rack with hand crank - min. - max. distance table - drilling spindle 70 - 830 mm - Drive 400 V / 7.5 kW - Space requirement approx. W 600 x H 1980 x D 950 mm - Weight approx. 500 kg

SCREW : 100MM MOTOR : 45 KW REDUCER : ZLY250 SPEED : 250 250KGS/HOUR REMARKS : 1)WOODEN CASE PACKAGE 2)NOT INCLUDE INSTALLATION COST 3)SINGLE SCREW EXTRUDER (1 PCS) 4)MOULD (1 PCS) 5)COOLING FLUME (1 PCS) 6)DRY MACHINE (1 UNI) 7)ELECTRICAL CHANGE NET SYSTEM (1 UNI) 8)PELLETIZER (1 UNI) 9) high temperature wire (FOC 30 m) Pelletizing Auto Pusher + Conveyor #1

PET Coextrusion + Inline ILLIG RDKP72g Thermoforming Line, Age 2010, this equipment is suitable for PET, PP & PS Trays, Fruit & Vegetable baskets etc. :-, Inline S Plastic SRL PET Coextrusion line to produce pet sheet in-line with ILLIG RDKP72g 4-Station Thermoformer (hole punch station) Age 2010 :, Maximum output 680 kg/ hr, Maximum sheet width 800 mm, The line was originally purchased for €1.8 million., The line includes:, Electrical Control Panel, MSM Plastic Engineering Gravimetric Feeder, fed directly from the PET Dryer + additional Component for masterbatch or additive, Main extruder Model ED 100-40 dia. Ø100 mm, L/D 40, BP Plast BDO X2 100 Double plate hydraulic screen changer, MAAG Gear pump, Co-extruder Model E60-40 dia. Ø60 mm, L/D 40 with Gravimetric feeder, BP Plast Single plate hydraulic screen changer, MAAG Gear pump, 3- Layer (ABA) Melt Feed Adapter, Special extrusion  ...

FKS PrintBind KB 2000 Book Binder - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl FKS PrintBind KB 2000 Book Binder Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers Laminators Offset printing machinery Others Paper drills Perfect binders Pile turners Spare parts Stitching machines FKS PrintBind KB 2000 Book Binder Price: 3000 EUR Download PDF FKS PrintBind KB 2000 Book Binder This machine is 100% functional and ready to use. Manufactured by FKS Hamburg, Germany. Capable of binding books, brochures, pads, prescriptions, etc. A very handy machine, ideal for digital printing. The machine has a convenient base and a built-in compressor. Technical specifications: Maximum format: 320 x 310 mm Spine thickness:  ...

PET crate washer / PET crate washing system designed to automatically wash and sanitize reusable plastic (PET) beverage crates. 1,250 crates per hour Find more here - .ucymachines/ Contact us at - sales@ucymachines

Height=2.4 m, Overall length= 5 m, Overall width= 2.1 m, Net weight= 900 kg,

for water, lemonades and fruit spritzers. : 0.5 L, 1.0 L, 1.5 L : 24,000 bottles/h (with 1.0 L) (currently only max. 18,000 bottles/h at the packer) The full bottles are packed in PETCYCLE crates. The used bottles that come back with the empties are removed from the crates at the ejector and sent for disposal. (Shredder is no longer available.) The new bottles are destacked pallet by pallet at the new bottle depalletiser and transported pneumatically to the rinser. The system consists of - - Manufacturer: Year of construction: 2001 - Manufacturer: Year of construction: 2001 - Manufacturer: & Year of construction: 1978 with downstream Velcorin dosing system - : - /, / Manufacturer: Year of construction: 2001 with chlorine dioxide and sterile water rinsing - -- Manufacturer: Year of manufacture: 2001 with Alcoa screw capper and liquid nitrogen dosing system -  ...

Overview  This complete PET bottling line was manufactured between 2000 and 2012 by a group of reputable European manufacturers, including SIG Corpoplast, KHS, Sacmi, Kisters, Paxona, and others. The line is suitable for still and carbonated soft drinks and includes a blow moulder, filler, labeller, packer, and various conveyor and inspection systems. The line reaches up to 36,000 bph at 1.5L and is available promptly. All machines are well maintained and include original components and relevant peripheral equipment. Technical data  Capacity: 36,000 bph at 1.5L water 35,000 bph at 1.5L soft drinks (sweet) 32,000 bph at 1.5L soft drinks (light) Formats: 0.5L and 1.5L bottles PCO 28-1881 closure Filling product: Water and carbonated soft drinks (7.5g CO₂) Closure system: Screw caps, fed via chute and tipper (Zalkin + NSM) Packing: Shrink pack: 3x2 bottles (double lane) Pallet type: Eur ...

Used Sidel Combiblock for PET 18000 BPHTechnical Specifications & Performance DataThe Sidel Combiblock is a synchronized blow-fill-cap monoblock engineered for high-efficiency, reliable, and high-quality container production within used bottling lines and industrial packaging environments. Built in 2002, this integrated system combines a rotary PET blow molder, a high-precision gravity filler, and a robust capping turret into a single space-saving frame. The blowing section features 16 cavities for continuous operation and is equipped with an air recovery system to improve energy efficiency. The filling zone includes a pressurized clean cabin with filters, while the capping system handles advanced tethered closure profiles. Please note that molds are not included and a chiller is not supplied with the machine.Manufacturer: Sidel / Arol CombiModel: SBO 16 Series 2 (Blower) + Sidel ALSIM ( ...

Used Rotary Filler–Capper Monoblock 24/8 for PET and HDPE Bottles – Overview 2020 rotary 24-valve volumetric unit with fixed nozzles and a 1-head crown capper, rated 6000 Bottles/hour. Configured for PET containers in 1 L format with neck 28 and clockwise rotation. Manufacturer: VARIOUS BRANDS, Model: 24.8 volumetric. Non-aseptic and non-isobaric operation for still products. This compact Second-Hand PET Filler is a rotary monoblock filling machine suited to detergents, liquid soap, oil, spreads and sauces, and still water lines. This used filler for sale is presented as installed; format and utilities checks are recommended prior to commissioning. Technical Specifications & Performance Data Configuration: Rotary monoblock with volumetric filler and integrated capper Manufacturer / Model: VARIOUS BRANDS / 24.8 volumetric Year: 2020 Container material: PET Formats: 1 L Product types:  ...

Technical Specifications & Performance Data The Bertolaso 30/30/4 filling monoblock is a 2021 NEW unit engineered for PET and glass bottles in beverage production, combining rinsing, filling, and capping in a compact, hygienic unibloc. Designed for accurate, repeatable performance on flat drinks and juice, it delivers excellent process control for industrial packaging environments. Manufacturer/Model: Bertolaso 30/30/4 Year/Condition: 2021, NEW, zero operating hours Rated speed: up to 6500 bph Monoblock configuration: 30-gripper rinser, 30-valve filler, 4-head capper Container materials: PET and glass Bottle dimensions: diameter 52±2 mm to 100 mm; height 180 to 360 mm Minimum internal neck: 18.5±0.5 mm (16 mm filling valve) Closures supported: aluminum screw caps 28x18, 28x35, 31.5x18; 31.5x24 with pourer; plastic press-on 30x20 Rinser: 30 grippers, single-treatment, 3–6 bar water su ...

New PET filling monoblock for CSD up to 15000 bph System Overview: The Unibloc 50 50 10” model by UBL SRL is an integrated bottling system, designed to operate with a maximum capacity of 15000 BPH. Its architecture combines three main functions: rinsing, filling and closing in a single monobloc. Rotary Rinse in the New filling monoblock for CSD: The rinsing section includes 50 heads, configured to process PET bottles. The design allows for effective and rapid washing, essential for maintaining hygiene standards. Counterpressure Filling: The filling module uses 50 isobaric valves to ensure uniform and precise filling. The isobaric system is particularly advantageous for carbonated drinks such as soft drinks and sparkling water, minimizing the loss of CO2 during filling. Screw Closure: The sealing section is equipped with 10 rotary heads for applying plastic screw caps. This mechanism en ...