129,501 used machines on RESALE, but how to find them? Machine Search
good driving car Auction-ID: A1-42016-188
PET filling line Krones / Kosme / Vipoll capacity: 12.000 bph by 0,5 ltr. bottles 8.500 bph by 1,5 ltr. bottles year of manufacturing: 2002 - 2014 closure: PCO 28-1881 filling product: water and carbonated drinks packaging: 3 x 2 bottles shrinked into foil pallet: Euro pallet 1.200 x 800 PLC: Siemens S7 consisting of: 1. Blowing machine Kosme KSB 6R year of manufacturing: 2012 with 6 cavities including heating oven including air reconvery system heating station is water cooled including prefom neck cooling (air cooled) air consumption: 34 bar including roller sorter including infeed conveyor The blowing machine is without tipper, cooler, compressor and blowing molds 2. Air conveyor Krones year of manufacturing: 2012 including pneumatically adjustable railing 3. Rinser-Filler bloc Vipoll type Visitron VK-E-40-50-10 ...
PERO – Industrial Parts Washer (Conveyor Type) General data: Manufacturer: Pero (KG Masch.- u. Apparate-Bau Ing. P. Erbel / Pero GmbH, Germany) Year of manufacture: 1992 Machine type: Industrial parts washer (continuous conveyor system) Condition: Used Weight: approx. 2500 kg Dimensions (L x W x H): approx. 4000 x 1800 x 2000 mm Technical details: Power: approx. 12 – 18 kW Voltage: 380 V Frequency: 50 Hz Nominal current: approx. 18.9 A Heating capacity: approx. 12 – 18 kW Working conveyor width: approx. 300 – 400 mm Process: Multi-stage cleaning system: - Washing (chemical cleaning) - Rinsing - Drying (with pneumatic system) Equipment: Roller conveyor feed system Filtration tank Pump unit Enclosed cleaning chamber PLC-based control panel (older generation) Description: Industrial conveyor-type parts washer designed for continuous cleaning and ...
PEDESTAL:. - Hole pattern for robot : Kuka low / medium load :. DIMENSIONS / WEIGHTS:. - total height:1200 mm
PEDESTAL:. - Hole pattern for robot : Kuka low / medium load :. DIMENSIONS / WEIGHTS:. - total height:1200 mm - total weight approx.:905 kg
PEDESTAL:. - Hole pattern for robot : Kuka low / medium load :. DIMENSIONS / WEIGHTS:. - total height:1200 mm
PEDESTAL:. - Hole pattern for robot : Kuka low / medium load :. DIMENSIONS / WEIGHTS:. - total height:1200 mm
PEDESTAL:. - Hole pattern for robot : Kuka low / medium load :. DIMENSIONS / WEIGHTS:. - total height:1000 mm
PEDESTAL:. - Hole pattern for robot : Kuka heavy load :. DIMENSIONS / WEIGHTS:. - total height:1200 mm
PEDESTAL:. - Hole pattern for robot : Kuka heavy load :. DIMENSIONS / WEIGHTS:. - total height:1000 mm - total weight approx.:460 kg
PEDESTAL:. - Hole pattern for robot : Kuka low / medium load :. DIMENSIONS / WEIGHTS:. - total height:1200 mm - total weight approx.:1100 kg Technical description : KUKA Robot Pedestal with drilling pattern for Kuka robot KRC2. KR 210 robot was mounted. Total height 1200 mm.
Disc diameter 350mm Speed 1400rpm Power: 1.8KW see pictures
Machine number: 01882 Cutting length: 300 mm incl. roller conveyor Roller conveyor width: 380 mm Roller conveyor length: 4000 mm
" Permanent magnetic clamping plate Narex PERMAG 160/400. The magnetic clamping plate has a switch via lateral lever (on/off). The clamping surface is designed with a longitudinal pole pitch and is suitable for clamping ferromagnetic workpieces. Product: Permanent magnetic clamping plate Manufacturer: Narex Type / Designation: PERMAG 150/400 Origin: Made in Czechoslovakia • Clamping surface: 400 × 160 mm • Height: approx. 75 mm "
Peddinghaus Peddimaster 80/110 punching shearing machine; with PEHU X-Y coordination table and many accessories; powerful and easy-to-use machine for punching and shearing operations; Voltage: 380 volts ; Punching capacity: 80 TON; Shearing capacity: 110 TONS; With PEHU coordination table ; Weight approx. 2200 kg
SINGLE POINT OPEN BACK INCLINABLE POWER PRESS Inv. No. 11.421PC Make IWK Model PEKRON 150Z Machine No. 1512 Capacity 150 tons Ram stroke 200 mm Ram adjustment 100 mm Shut height min/max 370 / 570 mm Strokes per minute 40 Knock out in ram 0 – 70 mm RPM 10 - 815 Throat 290 mm Power inclinable 30 degrees, 4kW Table 1000 x 630 mm Ram 760 x 410 mm Q 12 Volts 230 / 400 Cycles 50 Hz Including: Bolster plate 1.000 x 630 x 80 mm Bolster plate 1.000 x 630 x 90 mm Table opening, diameter 440 mm Updated electrics 2004 CE certified
with feed device Nominal force: 1000 kN Pneumatic pressure: 5 bar Permissible delay time: 210 ms Safety distance Tool operation: 336 mm Continuous stroke (interchangeable pulley): 50/80 rpm Single stroke: 45 rpm Working capacity in continuous stroke: 3500/5000 Nm Torque: 25,000 Nm Drive power: 11.5 kW with control panel and digital display CPS 20 with support frame
Incl. automatic feeding, basket size 475x320x200 mm, loading weight working chamber 80 kg, minimum cycle time 7.5 min, connected load 25.5 kW, system weight empty 1700 kg, loading max. 800 kg
A Scantech thickness gauge is available. Measuring frame: 5500mm, measuring width: 5200mm, material: PU/acrylate/EVA coating, backing: polyester/cotton, max. basis weight: 600g/m², parallel accuracy: less than 0.2mm, measuring gap: 60mm-80mm, web speed: 550m/min. Sensor XT10: PP: 2g-2000g/m², accuracy: +/-0.1%, resolution range: 2mm-10mm. The machine has never been used. Documentation available. On-site inspection is possible.
SINGLE POINT OPEN BACK INCLINABLE POWER PRESS Inv. No. 11.420PC Make IWK Model PEKRON 150Z Machine No. 1501 Capacity 150 tons Ram stroke 200 mm Ram adjustment 100 mm Shut height min/max 370 / 570 mm Strokes per minute 40 Knock out in ram 0 – 70 mm RPM 10 - 815 Throat 290 mm Power inclinable 30 degrees, 4kW Table 1000 x 630 mm Ram 760 x 410 mm Q 12 Volts 230 / 400 Cycles 50 Hz Including: Bolster plate 1.000 x 630 x 80 mm Bolster plate 1.000 x 630 x 90 mm Table opening, diameter 440 mm Updated electrics 2004 CE certified
Load dimensions: 1200x800mm, max. load capacity: 2t, fork lift: 46-3120mm, fork tine dimensions: 1000x100x40mm, travel speed: 5km/h, motor power: 2kW, length: 2930mm, width: 940mm, operational hours counter: 41h. With documentation, no defects known, an on-site inspection is possible.
Grooving machine Foellmer 45ME Year of construction 1998 Art.Nr. L1008
Offer 25170 Specifications: - Drilling capacity in steel ST 60 40 mm - Drilling capacity in steel ST 60 50 mm - Drilling spindle holder MK 4 - Drilling spindle stroke 180 mm - Drilling spindle speeds infinitely adjustable with countershaft - Level 1: 60 - 210 rpm - Level 2 210 - 765 rpm - Level 3 120 - 420 rpm - Level 4: 420 - 1530 rpm - Projection 330 mm - 3 feeds 0.1 - 0.2 - 0.3 rpm - Table with 2 T-slots 720 x 360 mm - Height-adjustable via rack with hand crank - Max. distance table – drilling spindle approx. 780 mm - Max. distance machined base plate - drilling spindle 1250 mm - Coolant device -Lighting - Machine vise - div. 10 pcs HSS - Drill - Drive 400 V / 2.6 / 4 kW - Space requirement approx. W 720 x H 2050 x D 1150 mm - Weight approx. 350 kg
Krones Air Conveyor diverter from 1 to 2 for PET air transport
Stock number: F950, Bundler, Pester Pewo-Pack 200 SN,, for stacks and bundles items.
Ref. 500 Grooving and perforating machine Bickel HK 3-88 Working width 88 cm Ma. No.: 9399 / Year of construction 1972 Groove comb with two thicknesses Perforating comb Functioning Ref. 500 Grooving and perforating machine Bickel HK 3-88 Working width 88 cm Ma. No.: 9399 / year of construction 1972 Grooving tool with two thicknesses Perforating tool Working condition
1 litre, Stock number: R1172, Litre: 1, Material: Stainless steel AISI 304, In stock: Yes, Item: Mixer, Amount in stock: 1 pc., Standing: In a cabinet, Double jacket: Yes, Agitator : 2 pcs., Agitator placement 1: Mixing agitator in the bottom, with variable speed, Agitator placement 2: Blend agitator in the side, with variable speed, Cover: In the top, Inner diameter: Ø 90 mm., Outer diameter: D 140 mm., Dimensions: L 650 x W 500 x H 1600 mm., Manufacturer: Baker Perkins, Type: Novamix
Stock number: F1103, Size: L 300 x W 540 x H 250 mm., Theoretical capacity: Max 1440 pcs/hour, In stock: Yes, Amount in stock: 1 pc., Item: Stretch film packing machine, Manufacturer: Pester, Type: PEWO-Pack 450 SN, Year: 1990, Documentation: Yes
Stock number: R351, Pectin agitator, stainless steel,, 18,5 kW motor, 2900 rpm, 380/420 V., Flange mounting in the top., D 240 mm head., Material: Stainless steel AISI 304, Head: D 240 mm.
350 litre, Stock number: T3407, Litre: 350, Material: Stainless acid proof steel AISI 316, In stock: Yes, Amount in stock: 1 pc., Item: Tank, Standing: 3 pcs. legs, Top: Dished, Bottom: Dished, Double jacket: Yes, Insulated: Yes, Outer cladding: Fully welded stainless, Tank cover: In the top, Ø 450 mm., CIP: Yes, Working temperature: 20° - 130° C, Working pressure tank: -1 - 2,5 Bar, Working pressure double jacket: 2,5 Bar, Inner diameter: Ø 690 mm., Outer diameter: D 900 mm., Total height: 1400 mm., Manufacturer: Strøm & Pedersen, Year: 1992, Other: The tank is polished on the inside
maximum number of results exceeded
please refine your search
500 € 
