pe pipe head used for sale

Clamping devices, clamping brackets, clamping clamps, clamping brackets, pipe clamps, pipe clamps, pipe clamping systems, mounting devices for pipes, quick-release pipe clamps, pipe quick-release clamps -Pipe clamping bracket: Pipe quick-release clamp -Clamping range: Ø 70 to 250 mm, see photos -Quantity: 1x tensioning bracket available -Dimensions: 400/200/125 mm -Weight: 6.8 kg

Punch, punching machine, punching device, hole punching machine, hole punch, copy punch, stop punch, hole punch, eccentric punch, serial hole punch, punching machine, punching press -Box tube punch: 50 x 30 mm -2x quick-change tool holders (for round tubes and rectangular tubes) -with tools round tube punch and rectangular tube punch -Coordinate stop -Protrusion: 155 mm -Quick-change system punching -Side and depth stops -Max. punching capacity: 36 t -Weight: approx. 2000 kg

UNUSED, Metal casing pipes for pile driving. Normally used in the construction of bridges, ports, decks, and piers. The driven pipes is filled with concrete, creating an extremely resistant structure. Total available weight is 750 tons. SALES VALUE PER TON $ .990,00 USD / KG

bending speed: 2.1 m/min Bending capacity - square: 30x30 mm bending capacity - flat iron: 80x15 mm Bending capacity - flat iron on edge: 50x10 mm tube diameter: 1 oder 60x2 mm Shaft diameter - upper: 35 mm Shaft diameter - lower: 30 mm total power requirement: 0,75 kw range L-W-H: 650 x 500 x 1300 mm weight: 170 kg Standard features: - hardened special steel shafts - a set of hardened rollers - Bottom rollers are driven - lateral straightening rollers - Foot pedal - horizontal and vertical working The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pipe belt conveyor in mint condition VECOPLAN type VRF 500 P. Never used before! Including drive station and deflection station, without belt! Drive station with 15 kW Flow rate approx. 200 m³/h Length approx. 65 running metres, diameter 500 mm

Waste stainless steel pipes ( 42CrNi18-10 ) Dimension 20 x 1 x3000 mm 39 pieces à'3 meters s

Offer 26161 Technical data: - Rated power at 50% ED 25 kVA - Max. welding power 107 kVA - Adjustable projection 140 - 500 mm - Welding values - sheet steel 6 + 6 mm - Brass sheet 3 + 3 mm - Aluminum sheet 1.2 + 1.2 mm - Electrode force adjustable 17 - 278 daN - Required air pressure 6 - 10 bar - Cooling water volume 8 l/min - Drive 400 V - Space requirement approx. W 670 x H 1250 x D 1600 mm - Weight approx. 240 kg - with : - DALEX MPS 200 welding control - E. Foot Switch

An automatic Weil tube welding system with rounder, tube transfer, end processing and Trumpf TruFlow laser unit is available. Tube diameter range: 80mm-250mm, material thickness range: 0.4mm-1mm, max. tube length: 1000mm. Documentation available. An on-site inspection is possible.

Kieserling WRUW1 bar straightener for 5 -30mm bar diameters. Speed 40m/min. New set of spare straightening rolls

This REIFENHÄUSER BI Trudes 115 was manufactured in 2013. Ideal for pipe extrusion, this machine represents a robust addition to any production line. Contact us for more information.

Tube & profiles bending machine ,Tauring Slalom 60-3A 8 rollers for left and right hand bending sense Operation in manual and automatic programmable axis with digital screen readout One-pass bending programmable in different planes manipulator programmable tube turner” 12 mtrs length tube feeder Complete with several set of rolls for tube from 14 to 60 mm - 8 pcs each set = total 140 rolls. Power rotation 3 kw voltage Vac 400/50 power hydraulic bending 2,2 Kw

Complete Reifenhäuser extrusion line for thin-walled PP pipes For sale is a complete extrusion line for the production of thin-walled pipes made of polypropylene (PP). The system covers the entire production process – from material supply and extrusion to vacuum calibration, cooling, hauffing and length measurement to automatic cutting and outfeeding. The line is currently under construction at the Alicante site in Spain and can be visited by appointment. The sale is preferably carried out as a complete system. TECHNICAL SPECIFICATIONS • Application: Production of thin-walled PP tubes• Documented tube diameters: 40, 50, 60, 80 and 90 mm• Adjustable cutting lengths: approx. 100 to 2,500 mm• Extruder: Reifenhäuser single-screw extruder• Drive power extruder: 4 kW• Electrical modernization: 2005• Drive control: frequency converter• Tube cutting: moving Batten ...

A TRUMPF CNC laser tube cutting system is offered. Max. tube length/outer circle diameter: 6500mm/150mm, Z-axis travel: 170mm, laser power: 2700W, max. material thickness steel/stainless steel/aluminum: 8mm/5mm/4mm, operating hours: 86567h, laser operating hours (laser on/beam on): 81557h/27316h. Including PRS 3001 part-removal station with brush table and LoadMaster Tube with bundle magazine LD 6000. Overall dimensions X/Y/Z: approx. 16000mm/8200mm/2800mm, weight: approx. 17.5t. An on-site inspection is possible.

Offer 22186 Technical data: - Bending performance - Tube at 45 kg / mm² Ø 6 - 48 mm - Solid material up to approx. 30 mm - Max. bending angle 180 ° - Bending radius 2 x D - Drive 400 V / 1.5 kW - Space requirement approx. W 4500 x H 1400 x D 1000 mm - Weight approx. 600 kg - with - Digital bending angle display + bending angle fine adjustment - Mandrel bending device 3.0 m. with hydr. Withdrawal - Bending tools 20 R 60 ; 22 R 66 ; 25 R 75 mm - 25 R 50 ; 38 R 114 mm - various bending mandrel e 3000 mm

tube diameter: 60 mm wall strength: 3 mm bending radius min.: 2 x Rohr-Ø ÷ R200 mm : 0 - 180 ° : 2 (60.,3mm) mm : stufenlos 0,5 - 2,0 : 1,5 kW : 700 kg - Powerful mandrel bending machine up to 2 gas pipe (60.3mm) in semi-automatic design (6000 mm pipe slide length) - Electromechanical drive of the bending axis - hydraulic clamping - mandrel feed / extract - 30 programs x 9 bending angle + correction angle The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

tube diameter: 60 mm wall strength: 6 mm bending radius min.: 180 mm total power requirement: 5,5 kW weight of the machine ca.: 1300 t dimensions of the machine ca.: 3500 x 1250 x 1300 m Description: Round tube steel (S235): 60.0 x 6.0 mm Round tube stainless steel (S 355): 60.0 x 4.0 mm Square tube steel: 50 x 50 x 4.0 mm Rectangular tube steel: 60 x 40 x 2.0 mm max. usable length: 3048 mm Bending speed: 10°/sec including tools (see photos) Mandrel is no longer available, can be retrofitted The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

used Picard pipe rod with pipe rod holder, self-made, 2700 mm, is sold in its existing condition Working width: h 50 mm Working length: 2700 mm Weight: 35 kg Colour: black

used Picard pipe rod with pipe rod holder, self-made, 2700 mm, is sold in its existing condition Working width: 50 mm Working length: 2000 mm Weight: 30 kg Colour: black

8-channel, Volume 30-300 uL, including epT.I.P.S. box with 96 pipette tips not used in carton box Auction-ID: A1-48959-463

8-channel, Volume 10-100 uL, including epT.I.P.S. box with 96 pipette tips not used in carton box Auction-ID: A1-48959-452

Volume 10-100 uL, including epT.I.P.S. box with 96 pipette tips not used in carton box Auction-ID: A1-48959-460

8-channel, Volume 0.5-10 uL, including epT.I.P.S. box with 96 pipette tips not used in carton box Auction-ID: A1-48959-450

8-channel, Volume 30-300 uL, including epT.I.P.S. box with 96 pipette tipsnot used in carton box Auction-ID: A1-48959-462

Volume 0.1-2.5 uL, including epT.I.P.S. box with 96 pipette tips not used in carton box Auction-ID: A1-48959-459

8-channel, Volume 120-1200 uL, not used in carton box Auction-ID: A1-48959-465

8-channel, Volume 10-100 uL, including epT.I.P.S. box with 96 pipette tips not used in carton box Auction-ID: A1-48959-451

Volume 20-200 uL, including epT.I.P.S. box with 96 pipette tips not used in carton box Auction-ID: A1-48959-461

8-channel, Volume 120-1200 uL, not used in carton box Auction-ID: A1-48959-464

Consisting of 2x INTEGRA” pipetboy and 7x rainin” pipettes with 1x carousel Auction-ID: A1-49790-1512

Consisting of 2x INTEGRA” pipetboy and 7x rainin” pipettes with 1x carousel Auction-ID: A1-49818-1512

: neu : ca. 12 - 14 Wochen ab Auf : Italien : 38900 € : 742.99 € : 64 mm : 4000 mm : 950 mm : 1250 mm : 850 kg : 10 cm³ : 64 x 3,3 mm : 2 mm : 60,3 x 2,2 mm : 60 x 60 x 2 mm : 40 x 60 x 4 mm : 60 x 40 x 3 mm : 76 mm : 200 mm : 20 mm : 210 ° : 4.2 kW : 15 l with mandrel 3 m length FST closure system (Patented) with auxiliary system for stabilizing the hydraulic pressure of the slide Programmable C-axis bending Positioning of the 2-axis manual spindle carriage (Y1=Feed and B=Rotation) with high resolution encoder and standard adjustable mechanical stops Multifunction control keyboard integrated in the machine body with microprocessor control with multifunctional menu 30 programs of 9 bends each can be memorized Screen for digital display for carriage feed (Y1 Axis) and rotation (B Axis) External pressure gauges for easy setting of the system and closing pressure Variable bending spee ...

Highly automated CNC tube bending cell Rosenberger RB20 Typical application The RB20 series is designed for cold bending of one or more bends on pipes It is used in industries such as the automotive industry, furniture manufacturing or plant engineering, where precise series bending is required. Technical features and function Type: ROSENBERGER RB20 (built in 2003) Performance & geometry: Servo-electric precision drive with a cold bending capacity of max. Ø 20 x 1.5 mm in steel. High flexibility due to freely selectable bending planes within the 78 mm tool height as well as generous 3-axis travel paths (X/Y/Z: 260 × 146 × 1,170 mm) Control technology: The logical processing is carried out via a robust Siemens Simatic S7-300 PLC, paired with an industrial control panel from B&R Robot automation: Fully automatic handling (loading/unloading) by means of an integrate ...

The ratchet thread set is suitable for threading galvanized iron pipes or gas pipelines. Auction-ID: A7-50066-82

The ratchet thread set is suitable for threading galvanized iron pipes or gas pipelines. Auction-ID: A7-50066-182

The ratchet thread set is suitable for threading galvanized iron pipes or gas pipelines. Auction-ID: A7-50066-282

In metal box.

tube diameter: 48 mm bending radius max.: 90 ° total power requirement: 1,5 kW weight of the machine ca.: 0,5 t dimensions of the machine ca.: 1,8 x 0,8 x 1,2 m Electro-hydraulic mandrel tube bending machine with - four-position bending angle pre-selection - bending tools: 48.3, 42.4, 33.7, 1/2 - mandrel length: 4500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Fire Kuag Type Kuag RA 250 6E Year 1999 Voltage 3x400 V Serial number 077099 Auction-ID: A1-50242-41

Brand SICA S.p.A Type TRS/SY 32-250 C 2000 Serial No. 0817501 Year of manufacturing 2008 Voltage 400 V Power 6 kW Pipe Diameter max. 32 – 250 Ø (mm) Dimensions (LxWxH) 4000 x 1080 x 2400 Mm Weight 2050 kG Extra info • Including clamps & Spare parts. • Machine is deployable for sawing and chamfering or only sawing. • Electronically driven sawing carriage for very high precision cutting. • Guiding distance of 2 meters allows for high line speeds Auction-ID: A1-50242-21

Quantity: 3 Features: 8 EDP3-Plus channel pipette from 20 to 300 μL, one from 10 to 100 μL and one from 2 to 20 μL Auction-ID: A1-50093-100

Quantity: 2 Auction-ID: A1-50093-192

Quantity: 5 Features: 12 channels 0.5-10 μL 12 channels 2-20 μL 08 channels 2-20 μL 12 channels 20-200 μl 12 channels 20-200 μL - Auction-ID: A1-50093-14

Characteristics : Max. volume: 100 ml - Min.: 1 ml Auction-ID: A1-50093-17

Quantity: 2 Auction-ID: A1-50093-191

Features: 1-30 μL 12 channels / 2-125 μL 12 channels / 10-300 μL 8 channels Auction-ID: A1-50093-340

Brand SICA S.p.A Type TRS/U 110 - 800 Serial No. 0229707 Year of manufacturing 2003 Voltage 380 V Power 5.5 kW Pipe Diameter max. 110 – 800 Ø (mm) Dimensions (LxWxH) 6000 x 2100 x 2460 Mm Weight 3750 kG Extra info • Machine is deployable for sawing and chamfering or only sawing. • Because of universal clamps, all diameters can be produced without changing clamps. Auction-ID: A1-50242-22

Brand IPM Type TV 63 Year of manufacturing 2008 Voltage 400 V Power 3 kW Pipe Diameter max. 63 ø Auction-ID: A1-50242-23

Characteristics : Max. volume: 100 ml - Min.: 1 ml Auction-ID: A1-50093-16

Brand: SICA Type of Machine: Planetary saw Model: TRS/S/SY/U 63-400 Year of manufacturing: 2000 Auction-ID: A1-50242-18

Including Extruder, die, haul-off, saw and cooling bath Auction-ID: A1-50242-3