pe pipe head used for sale

Pester Pewo-pack 450SN bundle packer for single and multiple cartons with infeed conveyor (1.5m long), turning wheel and PEWO-therm III 450 E shrink tunnel Infeed width from 82 - 205mm Infeed length from 84.5 - 245 mm Infeed height from 59 - 87 mm Maximum collation width 450 mm Suitable for film types PE, PP & PP stretched, film width from 50 mm up to 450 mm, film thickness from 0.025 to 0.100 mm, roll diameter max. 300 mm, roll core diameter 70/76 mm, connection voltage 3 x 400 V + N + PE / 50-60 Hz, Power consumption 9.0 kW / 14.5 A, operating pressure 5 bar, machine base area approx. 4930 x 1230 mm(LxW), infeed height 900 mm, outfeed height 900-950 mm, machine net weight approx. 1,350 kg, output up to 24 cycles per minute

Pester PEWO-Pack 450SN collator bundler for cartons, with right angle infeed stacking/collation unit (cartons are collated on their narrow side), max. collation size 270 x 400 x 150 mm (LxWxH), up to 35 bundles per minute. With PEWO-Therm shrink tunnel (tunnel entrance approx. 420 x 150mm) and packing table with cross-pusher.

Planetary mixer with infused tool, 2 mixing stars, 4 mixing buckets and scraper / emptying bucket. Maximum filling per batch: 2,250 l. / 3,600 kg, solid concrete output per batch: 1,500 l., workable grain size: 0 - 65 mm, with double-sided swivel valve outlet (hydraulicact). Incl. main drive motor 75 kW and many spare parts.

Planetary mixer with whirler tool, 2 mixing stars, 4 mixing shovels and scraper / discharging shovel. Maximum capacity per batch: 2.250 l. / 3.600 kg, hardened concrete output per batch: 1.500 l., processable grain sizes: 0 - 65 mm, with dual outlet (operated hydraulically). Incl. main drive 75 kW and many spare parts.

Complete range of well-preserved stamps and dies in the same number and diameter as in the brochure shown.

Mechanical punch with a punching force of 1000kN. tool holder for stamps up to 90 mm can be mounted on request. A wide range of stamps and dies is included in the scope of delivery.

The mubea and Peddinghaus tools pictured are not sold completely. You can tell us what stamps and dies you need, so that we put together an individual assortment for you.

Maximum punching force: 1100 kN Maximum shear force: 1700 kN punch ing: 510 mm support table hole 31 in 25 mm flat steel: 500 x 22 mm hydraulic holder for the flat steel knife kago n weight: approx. 5000 kg ; Very good

Pester PEWO-therm III 250 K PEWO-therm includes following modules (standard equipment): -Maintenance-free mesh conveyor belt -With frequency-controlled three-phase motor -Rotary switch for the band -Temperature controllers -Pre and post shrink zone -Geräuschoptimiererter fan and adjustable air ducts -Page radiators -Size range: 250 x 180/250 mm Technical data: -Machine execution of degree of protection IP54 -Voltage 3x400V + N + PE, 50 Hz / 60 Hz -Pluggable proximity switches IFM (standard) -Packaging material PE flat foil -Infeed height of pester machine 900-950 mm -Spout height of pester machine 900-950 mm

see data sheet available under electricity immediately

see data sheet immediately available under current

Many thanks for your interest on our second hand machines, please find follow our offer: manufacturer : Petzholdt Type : probably KC 1200 dry conche Contents : 1600 l Utilizable volume : 1200 – 1600kg electrical : 15 KW, 380 Volt different : double jacked : 3 gear shift : completion date january 2017 We offer this machine in „fully rebuilt condition EXW Hess. Lichtenau, unpacked The photos show the machine before, while and after the overhaul

Horizontal peeling centrifuge Peony PPCS-555 used for solid-liquid separation in chemical, pharmaceutical &food industry. Horizontal peeling joints are discontinuous filtration centrifuges that are characterized by absolute reliability, even with the highest requirements. They are used in the production of mass, raw material and fine chemicals as well as in the food industry. Manufacturer: Peony Type: PPCS-555 Year: 2013 Drum diameter: 1250 mm Volume: 370 liters Capacity: 555 kg Total 3 pieces available - Horizontal shaft trifuge with perforated filter drum. - Hydraulically actuated wide knife peeling device. - Solid discharge in one of the centrifuges with schurre, in the other two with discharge screw. - Drive via V-belt. - Application discontinuously in batch operation for mechanical solid-liquid separation. - High separation and washing effect, low residual moistu ...

; Mileage [km]: 4; Power [PS]: 75

; Mileage [km]: 4; Power [PS]: 50

; Mileage [km]: 8; Power [PS]: 180

; Mileage [km]: 8; Power [PS]: 220

Maximum punching force: 650 kN More performance data see nameplate or on request Inclusive range of punches and matrices

The Pester machine is a two-station palletizer fitted with KUKA (KR16) robot technology. The cartons are palletized by the Pewo PAL 6 form on pallets according to a product-specific palletizing scheme.

Cutting diameter: 340 x 200 mm Section 45° round: 230 mm Cutting speed: 20-120 m / min Stroke: 600 mm Blade dimensions: 4770-4870 x 32 x 1 mm Total power: 4 kW Machine weight: 1400 kg Dimensions (W x D x H): 2.6 x 1.4 x 1.6 m semi-automatic flow, heavy duty machine, good condition, ready for use

Pester PEWO-fold 1 overwrapping machine for single cartons and carton collations, in OPP-, PVC-, PE-materials, with foil width from 90 mm to 300 mm, film thickness from 0.02 mm to 0.05 mm, maximum roll diameter 350 mm. Size range min. 60 x 60 x 20 mm, max. 400 x 350 x 140 mm, Machine controlled using ELAU/Schneider PacDrive, Electrical connection 3x400V, V+N+PE/50-60 Hz, connected load 5.2 kW/12.5A, Operating pressure 4 bar, compressed air 4 to 10 bar. Infeed height approx. 900 mm, outfeed height approx. 900-950 mm. Output up to 60 cycles/collations per minute. Includes: Infeed conveyor, 1100 mm long x 260 mm belt width, outfeed conveyor, 2000 mm long x 260 mm belt width, Alpha Compact labeller, PEWO-collect collating table, miscellaneous sets of format parts

Manufacturer: Pepperl and Fuchs Type: F2D0-FB-EX4.CG For FOUNDATION Fieldbus H1 and PROFIBUS PA Attention! We have on the market the best prices, several quantities and many other parts of the company Pepperl and Fuchs. Buy more than 1 piece, there is still a great discount. New! The part was bought from a spare parts warehouse of a company and is completely new.We give you a functional guarantee for 6 months. If the device fails, we will replace it with a new one or refund the purchase price. We have more parts. Technical specifications: abcs://abc.pepperl-fuchs.com/germany/de/classid_454.htm?view=productde tails&prodid=52721#overview

We offer for Peri Maximo MX 15 270 x 240 frame formwork: Maximo MX 15 / 270 7 x Element MX 270 x 240, newly occupied, 40% discount a 1599,00€ 18 x Element MX 270 x 240, used, 50% discount a 1332,50€ 2 x Element X 270 x 120, newly occupied, 40% discount a 924,00€ 3 x Element MX 270 x 120, used, 50% discount a 770,00€ 9 x Element MX 30 x 240, newly occupied, 40% discount a 3901,30€ - Frame + formwork skin top condition - Newly occupied or good used formwork skin - Frame primed and varnished with zinc phosphate paint. - SB2/3 easily possible They offer on 1 element MX 270 x 240, newly occupied, 40% discount a 1599,00€ Subject to sale All prices excl. VAT + transport For questions 0049 176 70044689 Mr. Becker Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Compa ...

Used ribbon mixer, capacity approx. 300 liters. Manufacturer Baker Perkins Ltd.

Slotting machine Perini CMP 450 Stroke adjustable from 120 to 450mm Throuth 600mm Ramadjustment 500mm Tabledimensions 580x1000mm Tabledisplacements 400x400mm Brakemotor 4.5Kw Strokes 12-60/min Powerfeed Tilting of head Li-Ri 45° Automatic lubrication system Ram newly scraped Incl turntable chuck and some tools

Machine type: 5-fold combined Section Shear with Hole Punching, Manufacturer: PEDDINGHAUS,. Model: Peddy,. Built: 1970,. Condition: very good. Offer type: used machine,. ,. Technical data:,. Performance in mm:,. Sheet metal: 10 mm,. Round: 28 mm,. Hole: 15 in 10 mm,. Drive type: el./mech.,. Drive: 1.5 kW,. Comment:. Punching hole,. Notcher,. Material stop,. Bogie. Weight: 500 kg,. ,. The machine is in a very good shape and ready for operation. It can be visited and demonstrated at our location,. ,. We will be pleased if you take an interest in our offer.,.

PERTEN Inframatic Type Percon 8100 Checked by an PERTEN expert Sample measurements done. The device has been pre-adjusted. For final use, a recalibration with reference samples is required.

Technical details Cutting width= .40 - .000mm Machine weight approx.: 640 kg Room requirements LxWxH approx.: 1800 x 1350 x 1920mm The machine was little needed, very good condition Extract from the manufacturer Infosheet: Technical data > For single to medium series productionâ Maximum cutting depth: 40mm The machine is in a very well maintained and very good condition and can be visited at any time under electricity by appointment. Subject to changes and errors in the technical details and information provided. Round cuts from 40 to 1000mm - size II Round cuts from 40 to 1500mm - size III The machines P 2000 II and P 2000 III are stand machines in a stable steel construction. They cut cleanly, dimensionally, with a straight cutting edge all cutting-edgeable materials: such as rubber, felt, cardboard, plastics, fibres, graphite with and without inserts, et ...

Trieur cleaning Petkous K231A's are three pieces

Dairy Mschinery UK now offers new Glass Bottle Fillers for Milk and Juice. We offer machines for Hot fill and Cold Fill. Our bottle capacities are between 1000 - 7000 bottles per hour. Manufacture : Dairy Machinery UK Volume : 500ml - 1000ml Capacity : Option on order between 1000- 7000 bph Capping : 38mm magnetic capping chucks Filling Nozzles : Gravity Filling on Rubbers Lift and Fill or Gravity Filling Drop and Fill Cap : Aluminium Screw Cap CIP : Available Controls : Control panel Standards 2019 Certified : EC certificates Installation : We install all our machines at the clients facilities. Warranty : 12 months Spare Parts : spares@dairymachineryuk.co.uk

Belt coil batch mixer type PRB 300 in stainless steel 1.4306; Useful capacity 210 litres; Mixing tools welded to shaft as mixed paddle; Main drive with 4 kW at 66rpm; 1 inspection flaps on top of the mixer with safety lock; mixer suitable for food production; New storage machine

PETEWE optical tool and profile grinding machine PF 3S Projection area: 440320 mm max. grinding stroke: 15-105 mm Stroke number infinitely variable: 0 - 150 rpm. max. grinding wheels through: 175 mm Spindle speed infinitely variable: 5,000 rpm Swivel range grinding head in the horizontal X plane: x 15° side Y plane: . . . . . . . . . . . . . . vertical Z plane: -2° to +10° Grinding head slide movement in X direction: 120 mm in Y direction: 90 mm Adjustment of werkstuecktraeger in X direction: 160 mm in Y direction: 160 mm Sine-mounted clamping plate Clamping: 150 mm 230 mm Sine setting: 0-30°

Size: 0300, outlet opening (300x300) mm, Operating overpressure 0.8 bar, Operating temperature: 120°C

used wood carburetor Plant Bj 99 with control cabinets and Perkins gas engine, Generator Stamford 670 kVA Plant was only in operation for 6 months also associated wood chip drying plant available

250 Ton x 5100mm Over Bed CNC Press Brake. Admitting 4500mm Between Side Frames. 3000mm Long Heavy Duty Back Gauge. Including Cybelec DNC 800 8 axis control. (Y1, Y2, X1, X2, Z1, Z2, R1, R2) Auto Crowing. Infra-Red Operator Guards. Hydraulic Top Tool Clamping. Side & Rear Safety Fences. Tooling Carousel. S/No 97P288. New 1997

COMPLETE WAREHOUSE COLD INSTALLATION OTT & PEETZ BRAND TYPE: V18-4, serial no. 01922971, manufactured 1992 and REFRIGERATING CONDENSER GÜNTNER GVH 101A / 2E (S), manufactured 1999 The outdoor installation is complete besides the electric panel has 4 Bitzer compressors, Bitzer ES 900 liquid receiver + pressure switch + condenser GÜNTNER GVH 101A / 2E (S) The four compressors are: 2 Bitzer 4P-15.2 11 kW compressors, volume each 47.14 mc / h, 50 Hz, ND / HD max 19/25 bar, year 1992, 380-420V power supply, 3 ph 2 Bitzer 4N-12.2 Y compressors, volume each 56.10.14 mc / h, 50 Hz, ND / HD max 19/25 bar, year 1999, power supply 380-420V, 3 ph It covers an internal cooled area of 152.38 square meters. GÜNTNER GVH 101A / 2E (S) REMOTE CONDENSER, 2 volume fans in liters 563, minimum pressure at 21 bar / 60 ° C, maximum working pressure 28 bar, maximum temperature 100 °C. At th ...

PEWO-FOLD 2 in very good condition with lots of format parts. Ready for inspection and shipment. See photos for further information.

Packaging machine PEWO - pack 450 SN with shrink tunnel Plant for stripping and packing products in boxes. The boxes are then wrapped in foil in the shrink tunnel. Very good ready-to-use condition, directly from production!

Automatic case packaging machine (rebuilt in 2012) for american cases. Machine including feeding system, 2 formats (incl. Seidenader camera vision system), and other accessories. Furthermore including exit belt with PAGO labeling system.

Pester PEWO pack 250 compact HS and Therm 250 - Balcony construction with free access to the work area Film storage - Thorn bearing with pneumatically opening spring pressure brake Closing unit Closing unit -Closing beam driven by servo motor and crank drive Sealing unit - low-wear sealing system thanks to steel sealing beams with precise temperature monitoring Plant features: - Operating side on the right - Lauer PCS control panel (standard) - Standard cladding in acrylic glass - Machine design degree of protection IP54 - Control cabinet for pack Compact - Voltage 3x400V+N+PE, 50 Hz/60 Hz - Control Elau PacDrive MAX-4 - Traffic light display in three-colour standard version - Electric standard version - Pneumaticstandard version - Pluggable proximity switch IFM (standard) - Model PEWO-therm III 250 mounted in line - For thermal side shrinkage ...

Table diameter 2.000 mm Working diameter 2.000 mm Machine under retrofit/rebuilding to install CNC Mechanical ready, totally rebuilt.

We offer 18 x formwork Peri Trio 240 x 120 elements on ( Top-up element ) 10 x Peri Trio 240 x 120, 60 % discount a 739,20EUR - - good used frames - - good used formwork skin 8 x Peri Trio 240 x 120, 50 % discount a 924,00EUR - - good used frames - - new formwork skin Package price: 14.784,00EUR net Also available separately Subject to sale All prices without VAT + transport For questions 0049 176 70044689 Mr. Becker Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Office/ warehouse address: Birkenstrasse 15 D-89185 Humlangen-Hüttisheim Register court Ulm: HRA722943 VAT ID NO: DE279047055

Technical data: - Knife length 150 mm - Special knives for processing thin sheets - 2 pcs material tensioner - mounted on sliding table - Table height 1000 mm - Space requirement approx. W 800 x H 1300 x D 800 mm - Weight approx. 100 kg