pe pipe die used for sale

Towing capacity: 2,800kg Load capacity: 700kg ! Crane up to 1750kg! Ford Transit Driving license B Light Cargo GASOLINE-CNG can also be converted to LPG (unique opportunity with these expensive diesel prices) 190,000 original kilometres, demonstrable with CAR-PASS 5-speed manual 3 Seats Crane + outriggers Double rear strap Towbar Radio/ CD player/AUX Multifunction steering wheel Power steering Electric windows Ex government 1st owner Non-smoking car Vehicle is in good condition! Auction-ID: A3-43369-5019

The Lora Pergola is ideal for luxury villas, hotel terraces and restaurants looking for a year-round outdoor solution, this model offers electric shades controlled by remote control. Key features and benefits Remote control: The slats are opened and closed by simply pressing a button via the remote control. Precise adjustment: You can precisely determine the angle of inclination of the slats to dose the amount of sun or completely close the roof in case of rain. Reinforced construction: Uses 150 x 150 mm square posts and wider double-layer slats that ensure exceptional strength. Wind: Certified resistance to winds of up to 35 m/s (approximately 120 km/h). Innovative drainage and electricity system: The posts are designed so that the water and electrical channels are separate. This allows cables to be hidden inside the post for a cleaner aesthetic and greater safety. Adjustable ventilat ...

The real estate compendium consists of two distinct cadastral units: Housing unit (cat. A/4), of about 100 m², located on the first floor, consisting of kitchen, bathroom and three bedrooms. Ancillary room/cellar (cat. C/2), located on the ground floor, of about 50 m², with an internal height of 4.00 m and direct access from Via Mazzini. The surfaces were taken from the cadastral plans. State of conservation: The warehouse is free, in its raw state, with a load-bearing masonry structure and without systems. The apartment is free and is in good general condition; It was renovated about 35 years ago and has no obvious deterioration of the structure. It is equipped with water, electricity and gas systems, as well as a recently installed natural gas boiler. Cadastral data: Land Registry of Buildings – Sheet 113, Particle 379: Sub. 1, cat. C/2, class 2, consistency 48 m²,  ...

already equipped with tachograph! - Working reversing camera! - automatic air conditioning - starts with booster (battery probably needs to be replaced, stood still for too long), drives and brakes properly - tow bar - 3 people - working d'Hollandia tailgate - engine light is on, probably due to bad battery Auction-ID: A3-43369-10869

Machine number: 01882 Cutting length: 300 mm incl. roller conveyor Roller conveyor width: 380 mm Roller conveyor length: 4000 mm Auction-ID: A7-46287-143

Maximum load: 130 kg Reach: 2194 mm Axis: 6 Teach Pendant included PLease also take a look at the attached PDF for more techical info. Contact: Email:gabor.racz@surplex.com Phone: +36304509673 Auction-ID: A7-46288-9

The Lora Pergola is ideal for luxury villas, hotel terraces and restaurants looking for a year-round outdoor solution. Key features and benefits Remote control: The slats are opened and closed by simply pressing a button via the remote control. Precise adjustment: You can precisely determine the angle of inclination of the slats to dose the amount of sun or completely close the roof in case of rain. Reinforced construction: Uses 150 x 150 mm square posts and wider double-layer slats that ensure exceptional strength. Wind: Certified resistance to winds of up to 35 m/s (approximately 120 km/h). Innovative drainage and electricity system: The posts are designed so that the water and electrical channels are separate. This allows cables to be hidden inside the post for a cleaner aesthetic and greater safety. Adjustable ventilation and light: The upper slats are adjustable, allowing precise  ...

high-quality MDF Italia mobile pedestal Desk 3.0 Colour: Lacquer: white Auction-ID: A7-46320-37

General data: VIN: VF3YD3MAU12D59459 Condition: used Mileage: 170,000 km Fuel: diesel Engine & performance: Power: 163 hp Capacity: 1997 cm³ Transmission: manual Auction-ID: A7-46317-2

Auction-ID: A7-46327-20

USM Haller 3-Drawer Mobile Container – Special Colour Boss Grey High-quality roll container from USM Haller with three drawers. Executed in the rare special colour \"Boss Grey\", produced as an exclusive special edition for Hugo Boss. Auction-ID: A7-46320-32

automatic transmission good driving car Auction-ID: A1-42015-195

Equipped with radio, electric windows, cruise control. Auction-ID: A1-42015-175

Equipped with: 35x industrial pendant lamps from Philips Auction-ID: A1-40106-90

high-quality MDF Italia mobile pedestal Desk 3.0 Colour: Lacquer: white Auction-ID: A7-46320-38

Unaudited Auction-ID: A7-46327-203

Power: 80 kW (~109 hp); 1.6 gasoline; 1,587 cm³ Operating parameters: Manual gearbox; mileage 146,000 km; VIN VF33BNFUC83742922 Workpiece capacity: 2 doors; cabriolet (CC, retractable hardtop); 4 seats Supported edges: N/A Edge types: N/A Included equipment: Standard road equipment (details N/C) Compliance: EU road approval Power supply: Gasoline Year/Manufacturer: 2004 / Peugeot – 307 CC Remarks: Used condition; petrol engine with manual transmission; convertible body version Compact 2-door convertible with 1.6 petrol engine and retractable hardtop. Auction-ID: A7-46319-22

Auction-ID: A1-46037-2901

Viewing angle: 140° Viewing direction: 0° (straight ahead) Depth of field: 5 to 100 mm Outer diameter (insertion shaft): 9.8 mm Working length: 1050 mm Overall length: 1373 mm Compatibility: The device is compatible with various PENTAX video processors, including EPK-700, EPK-100p, EPK-1000, EPK-i, EPK-i5000 and EPK-i7000. Unchecked from practice Closure Auction-ID: A7-46327-23

high-quality MDF Italia mobile pedestal Desk 3.0 Colour: Lacquer: white Auction-ID: A7-46320-39

high-quality MDF Italia mobile pedestal Desk 3.0 Colour: Lacquer: white Auction-ID: A7-46320-34

The Pentax EC-3840F is a device for healthcare professionals and has specific technical characteristics: Optical System: Field of view: 120 degrees Direction of view: Forward-facing Insertion tube: Outer diameter: 12.8 mm Working length: 150 cm Angulation (mobility of the tip): Up/down: 180 degrees Right/Left: 160 degrees Biopsy Channel: Channel diameter: 3.8 mm Unchecked from practice Closure Auction-ID: A7-46327-19

high-quality MDF Italia mobile pedestal Desk 3.0 Colour: Lacquer: white Auction-ID: A7-46320-35

high-quality MDF Italia mobile pedestal Desk 3.0 Colour: Lacquer: white Auction-ID: A7-46320-36

Schneider Electric - NU400218P - Unica cover frames 24 boxes (100 pieces per) Condition: unused Auction-ID: A1-46070-229

Lot of MIG welding wire steel G3Si1 rolls - Ø1.0 mm (D300 / 15 kg per roll) Weight: 725KG net Auction-ID: A1-46070-301

Schneider Electric - NU400218P - Unica cover frames 24 boxes (100 pieces per) Condition: unused Auction-ID: A1-46070-140

Peddinghaus Peddimaster 80/110 punching shearing machine; with PEHU X-Y coordination table and many accessories; powerful and easy-to-use machine for punching and shearing operations; Voltage: 380 volts ; Punching capacity: 80 TON; Shearing capacity: 110 TONS; With PEHU coordination table ; Weight approx. 2200 kg Auction-ID: A1-45170-5

Siemens / Sick / Pepperl+Fuchs - Batch Sinamics modules & safety sensors 6SL3130-6AE21-0AB1 & 6SL3100-1AE31-0AB1 Auction-ID: A1-46070-125

Length of mandrel: 4mtr ; With various sizes of molds Auction-ID: A1-45170-20

2.2kW; air volume 950m3/h; speed 82m/s; tank capacity 2000ml; manual; tools; 4892 Auction-ID: A1-45902-320

Unused; Hard top cover; protective cover cover ; stairs; Bluetooth speakers; LED lighting; Heater 3Kw; 2x2HP LX pump; 400W LX air pump; Balboa system; 62 hydraulic jets and 10 bubble jets; 50Hz; CE; 3 seats; 2 lounge; 6 waterfall fountains; 5955 Auction-ID: A1-45902-22

Permanent lifting magnet SAV PLN1000 – 1,000 kg • Manufacturer SAV Spann-Automations-Normteiletechnik GmbH, Nuremberg • Type / model SAV 531.01.PLN1000 Serial no.: 86937-04 Year of construction: 02/2015 Heavy permanent lifting magnet for lifting ferromagnetic workpieces such as steel plates, blocks or blanks. Mechanical on/off via hand lever. Condition: Used with clear paint chipping and signs of wear. Type: PLN1000 Max. load capacity: 1,000 kg Net weight: 40 kg Permanent magnet technology CE marking available Auction-ID: A7-46417-375

Unused; Hard top cover; protective cover cover ; stairs; Bluetooth speakers; LED lighting; Heater 3Kw; 2x2HP LX pump; 400W LX air pump; Balboa system; 62 hydraulic jets and 10 bubble jets; 50Hz; CE; 3 seats; 2 lounge; 6 waterfall fountains; 5955 Auction-ID: A1-45902-21

\" Tolerance test pin set Ø 5 mm Richard Knauthe KG No. 556 TGL 13619/1 Precision test pin set for checking dimensional deviations related to nominal dimension Ø 5 mm.Gradations from -100 μm to +100 μm.Complete in the original wooden box. Nominal dimension: 5 mm Deviation range: –100 μm to +100 μm Graduation: 1 μm / larger jumps according to the board Manufacturer: Richard Knauthe KG Standard: TGL 13619/1 Design: mechanical test pin set in a wooden box \" Auction-ID: A7-46417-285

V.v. Hard top cover; protective cover cover ; Bluetooth speakers; LED lighting; 5956 Unused; Hard top cover; protective cover cover ; stairs; Bluetooth speakers; LED lighting; Heater 3Kw; massage pump 2x2HP; 3 Fontains + Waterfall; Balboa system; 64 hydraulic jets; 50Hz; CE; 3 seats; 2 lounge; LED level light 22pcs; 5956 Auction-ID: A1-45902-24

V.v. Hard top cover; protective cover cover ; Bluetooth speakers; LED lighting; 5956 Unused; Hard top cover; protective cover cover ; stairs; Bluetooth speakers; LED lighting; Heater 3Kw; massage pump 2x2HP; 3 Fontains + Waterfall; Balboa system; 64 hydraulic jets; 50Hz; CE; 3 seats; 2 lounge; LED level light 22pcs; 5956 Auction-ID: A1-45902-23

2.2kW; air volume 950m3/h; speed 82m/s; tank capacity 2000ml; manual; tools; 4892 Auction-ID: A1-45902-318

Auction-ID: A7-45992-91

2.2kW; air volume 950m3/h; speed 82m/s; tank capacity 2000ml; manual; tools; 4892 Auction-ID: A1-45902-321

2.2kW; air volume 950m3/h; speed 82m/s; tank capacity 2000ml; manual; tools; 4892 Auction-ID: A1-45902-319

1 needle 3 threads; with superior transport; requires compressed air; servo motor ESDA 220 V; dimension: 1050 x 550 x 1050 mm; Auction-ID: A7-45992-150

\" Permanent magnetic clamping plate with longitudinal pole pitch. Designed for clamping ferromagnetic workpieces, e.g. for grinding or light milling work. Product: Permanent magnetic clamping plate Manufacturer: SAV Type: 243.01-300 × 150 FP1-100 Dimensions (approx.): • Clamping surface: 300 × 150 mm • Height: approx. 52 mm \" Auction-ID: A7-46417-167

With band attaching; Auction-ID: A7-45992-159

\" Test pin post 5–10 mm (5 individual sets) Richard Knauthe KG TGL 13620/I Cylindrical measuring pins stepped 0.05 mm Complete test pin lot consisting of five individual sets in the range of 5.00 mm to 10.00 mm.The sets cover the following ranges: • 5.00 – 6.00 mm • 6.00 – 7.00 mm • 7.00 – 8.00 mm • 8.00 – 9.00 mm • 9.00 – 10.00 mm Each set contains 21 measuring pins in 0.05 mm increments. Finish according to TGL 13620/I.Wooden boxes with signs of use. Measuring ranges: 5.00 – 10.00 mm Graduation: 0.05 mm Total number of pins: 105 pieces Standard: TGL 13620/I Manufacturer: Richard Knauthe KG, Limbach-Oberfrohna Design: cylindrical gauge pins \" Auction-ID: A7-46417-289

\" Wheeled tool trolley / work table HAHN+KOLB – with perforated wall – approx. 1150 x 720 x 900 mm Mobile tool trolley / work table from the manufacturer HAHN+KOLB. The trolley has a solid wooden worktop, a stable steel frame construction and a lower storage area made of sheet steel. A perforated wall (system perforation) is mounted on the back, including a small storage tray. Suitable as an assembly station, picking trolley or mobile workstation in workshop and production. Clear signs of wear on the worktop (wear, pressure points, paint abrasion). Technically stable, wheels functional. • Manufacturer: HAHN+KOLB • Type: mobile work table / workshop trolley • Dimensions (L x W x H): approx. 1150 x 720 x 900 mm • Worktop: wood • Underbody: sheet steel • Construction: perforated wall with storage tray • Chassis: 4 castors • Colour: blue / grey • Condition: used \"  ...

\" Permanent magnetic clamping plate Narex PERMAG 160/400. The magnetic clamping plate has a switch via lateral lever (on/off). The clamping surface is designed with a longitudinal pole pitch and is suitable for clamping ferromagnetic workpieces. Product: Permanent magnetic clamping plate Manufacturer: Narex Type / Designation: PERMAG 150/400 Origin: Made in Czechoslovakia • Clamping surface: 400 × 160 mm • Height: approx. 75 mm \" Auction-ID: A7-46417-166

Disposable PET filling line consisting of the following components: - Crate ejector (crate emptier, Gera GmbH, 20 ejectors in a 4x5 arrangement) for 0.5-litre bottles - Crate ejector for 1.0-litre bottles (Gera, 2003) - Case washer with cleaning nozzles - Stretch blow moulding machine (SIG, type Blomax 18, built in 2003, with 18 cavities) - Air conveyor for PET bottles (Convair, 2001) - Suction system (2003) - Air transport (KHS Innoline, 2003) - Premix system (Procomac Starmix CM, built in 2001, 250 hl/h) consisting of water degassing, mixer and carbonation with a total of 4 containers - Velcorindo dosing (dmt, Burdomat II G) - Cap feeding and cap conveyor system (Procomac, 2005) - PET bottle rinser, filler and capper (Procomac, 2001) - Labelling machine (P.E. Futura, 2001) for hot glue labelling of wrap-around labels, in block with laser dating (Videojet, 2017, with suction) and label  ...

for water, lemonades and fruit spritzers. : 0.5 L, 1.0 L, 1.5 L : 24,000 bottles/h (with 1.0 L) (currently only max. 18,000 bottles/h at the packer) The full bottles are packed in PETCYCLE crates. The used bottles that come back with the empties are removed from the crates at the ejector and sent for disposal. (Shredder is no longer available.) The new bottles are destacked pallet by pallet at the new bottle depalletiser and transported pneumatically to the rinser. The system consists of - - Manufacturer: Year of construction: 2001 - Manufacturer: Year of construction: 2001 - Manufacturer: & Year of construction: 1978 with downstream Velcorin dosing system - : - /, / Manufacturer: Year of construction: 2001 with chlorine dioxide and sterile water rinsing - -- Manufacturer: Year of manufacture: 2001 with Alcoa screw capper and liquid nitrogen dosing system -  ...

PET bottle air conveyor over 2 floors, used for 0.5 l, 1.0 l and 1.5 l bottles. Length approx. 50 m. Our team at VBW Asset Trade will be happy to answer your questions. Send us an inquiry or simply give us a call!, Additional title: PET bottle conveyor system, Capacity: 24000 b/h, Formats: 0,5, 1,0 l und 1,5 l PET-bottles, Material: mainly stainless steel, Position: free-standing on the floor / suspended from the ceiling, Features: Bottle transport channel with bottle guides, with 2 x 360° and additional curves, with a 15° incline and horizontal run, 5 frequency-controlled blower motors