pe pipe die used for sale

Proximity switch, proximity sensor, position switch -Manufacturer: Pepperl Fuchs, inductive proximity switch -Type: Varikont NJ15 27819S -Voltage: U=10-60VDC -Number: 7x switches available -Price per piece -Dimensions: 140/40/H40 mm -Weight: 0.3 kg/pc.

Foot switch, safety foot switch, foot pedal, foot controller, foot remote control, pedal controller, pedal switch -Manufacturer: SSUPOU, Foot switch type F1-U1 UN -Connector: 3-pin -Dimensions: 220/177/H141.5 mm -Weight: 2.5 kg

Vise, bench vise, locksmith vise, parallel vise, heavy-duty vise -Parallel vise: jaw width 150 x 30 mm -Wingspan: 190 mm -Quantity: 1 available -Dimensions: 485/210/H190 mm -Weight: 26 kg

Punch holder, die holder, notching tool, punching tool, punch, punching die, punching stamp, for eccentric press, hydraulic press -Punching tool: slot 10 x 26 mm -Punching dimensions: see photo with dimensions -Hole: Ø 40 mm -Dimensions: 400/90/H205mm -Weight: 7.5kg

Engine Brand: VOLVO PENTA, Conditie: USED, Engine Cooling Type: External Exchanger (eg. Keel Cooled) , Engine Color: Green , Flywheel Housing SAE: SAE 2 , Working Hours: 11800 Hour(s), Engine Condition: Used , Turbo Type: Watercooled , Exhaust System: Watercooled , ECU Present?: Yes , Starter Voltage: 24 Volt , Rated Power: 375 Kw, Rated Speed: 2250 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/catalog/product/view/id/219436, , = More information =, , Type: Engine, Type of fuel: Diesel, Empty weight: 1.600 kg, Type number: D11-MP

Engine Brand: PERKINS, Condition: NEW, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Black , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Engine Condition: New , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 198 Kw, Rated Speed: 1500 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/perkins-1506a-e88tag1-new/ 290, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: 1506A-E88TAG1; Transport weight [kg]: 920

Punch holder, die holder, notching tool, punching tool, punch, punching die, punching stamp, for eccentric press, hydraulic press -Punching tool: Long hole type S27-40 -Hole: Ø 40 mm -Dimensions: 300/150/H250 mm -Weight: 12.4 kg

Punch, punching machine, hole punch, eccentric punch -Manufacturer: Peddinghaus, hole punch -Type: 225B/45 -Pressure force: 45 tons. -Punching capacity: see photo of nameplate -Projection: 360 mm Accessories: incl. punching tool and 2nd table (see photos) -Dimensions: 1540/700/H1510 mm -Weight: 1410 kg

Engine Brand: PERKINS, Conditie: CORE, Engine Cooling Type: External Exchanger (eg. Keel Cooled) , Engine Color: Blue , Flywheel Housing SAE: SAE 3 , Flywheel SAE: Unknown , Working Hours: 6600 Hour(s), Engine Condition: Core , Turbo Type: None Mounted , Exhaust System: Watercooled , ECU Present?: no , Starter Voltage: 12 Volt , Rated Power: 62 Kw, Rated Speed: 2800 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/catalog/product/view/id/6747, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: 4.236 LD 33600 Marine; Transport weight [kg]: 460

AS-Interface lower section -Lower part with addressing socket -for connection to flat cables -Quantity: 2 pieces available -Price: per piece

Punching tool, punch, scraper, hold-down device -Scraper: hold-down device for punching -Holder: Ø16 x 210 mm -Dimensions: 265/100/H95 mm -Weight: 3.1 kg

Punching tool, punch, scraper, hold-down device -Scraper: hold-down device for punching -Holder: Ø17 x 210 mm -Dimensions: 265/100/H90 mm -Weight: 2.9 kg

APV 16" Servo Driven Wire-Cut & Continuous Rope Extruder with Guillotine Cutter APV 16 Servo driven Wire cut and continuous rope extruder with guillotine cutter / Frozen Dough wire cutter originally designed to cut cookies onto waz papaer. - Built new in 2010 - Originally designed to cut pucks of cookies onto wax paper sheets - All servo driven - Allen Bradley controls w Touchscreen - 16" wide two roll extruder - Wire-cut with oscillating knife - Continuous extrusion capable for ropes - Paper feed roller for cutting products onto wax paper - Guillotine cutter for wax paper but can also be used to cut ropes of product to specific lengths - Raising and lowering bed - Die with (5) outlets measuring approximately 0.625" x 1.25" - 3/60/480v - Machine on casters - Footprint approximately 11´ long x 4´ wide Find more here - / Contact us at -

Punching tool, punch, scraper, hold-down device -Scraper: hold-down device for punching -Holder: Ø22/25 x 215 mm -Dimensions: 315/65/H85 mm -Weight: 1.9 kg

Punching tool, punch, scraper, hold-down device -Handover: in current condition as seen -Bracket: Damage see photos -Scraper: hold-down device for punching -Receptacle: Ø26/22 x 210 mm -Dimensions: 315/125/H95 mm -Weight: 4.2 kg

Separating tool, punching tool, punch, punching die, punching die, gill forming tool -Manufacturer: Peddinghaus, punching tool for: holding matrices -Bore diameter: 70 mm -Dimensions: 220/320/H115 mm -Weight: 32 kg

Twin screw extruder APV Baker, int. ref. APV 5 (Baker Perkins) Ø50/25D + additional liner 10D(for 35D), this was totally revamped in 2017, liners and screws are in quite good conditions, reduction gear was replaced in 2021. Operator panel with recipes and 14 heating zones, all in good conditions. Find more here - / Contact us at -

Manufacturer: Peddinghaus Model: FDB 600 Type of Machine: Flat steel drilling and burning machine Find more here - / Contact us at -

Separating tool, punching tool, punch, punching die, punching die, gill forming tool -Manufacturer: Peddinghaus, punching tool scraper -Holes: Ø 13 mm -Threaded hole: M15 -Dimensions: 150/100/55 mm -Weight: 1.8 kg

Peddinghaus 960 cold saw and Peddinghaus TDK 1000/3 spindle beam drilling line 18M infeed and outfeed, 5M drag system infeed and outfeed, Hard stamper system, Fagor software operator system 1 Saw and drill and measuring system, nobody would buy these unless sold as one unit 2 Feed and transfer system 3 Hard stamper Find more here - / Contact us at -

:::TECHNICAL SPECIFICATIONS::: CNC model: Fanuc - CNC version: 0i MC - Tool holder: BT 40 - Spindle speed: 10000 - Number of tools: 24 X-axis travel: 800mm - Y-axis travel: 500mm - Z-axis travel: 500mm - Table dimensions: 900 x 460mm - Table capacity: 500Kg :::D DIMENSIONS AND WEIGHT::: Length: 2400mm Width: 2300mm Height: 2850mm Weight: 4600Kg

spindle diameter: 130 mm x-travel: 6000 mm y-travel: 2100 mm z-travel: 900 mm w-axis: 900 mm Control: Siemens type: 840 D angular milling head: spindle support bearing: : turning speeds: 1800 U/min total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Good day We offer you a used OCC sorting system consisting of a paper spike, type 2000, from the manufacturer Grumbach und Petermann GmbH, with a paper take-off belt, Bollegraaf type HBGT 1200 x 4760 15° and a single-deck star screen, fine, manufacturer Lubo Screening & Recycling Systems B.V. The machines were dismantled down to the base frame, derusted, primed and finally painted. Defective shafts and rubber stars, the V-belts and spikes of the PaperSpike as well as pneumatic cylinders were replaced. All bearings and drive chains were replaced, and the engines and transmissions were checked. A viewing is possible by appointment. We assume no liability for the technical information or any errors. We would be happy if this machine is interesting for you. Your service team Mertens & Frowein GmbH

round bar steel: 28 mm square edge steel: 25 mm L-beam: 80 x 8 mm cutting capacity: 35 t shear : steel sheet: max. 10 mm shear: flat material: 100 x 11 mm blade length: 175 mm triangle notching device for sheet until: 8 mm no. of strokes: max. 35 Hub/min work stroke: ca. 35 mm total power requirement: 1,5 kW weight of the machine ca.: 535 kg dimensions of the machine ca.: 0,97 x 0,45 x 1,55 m Condition: ready for operation: Electric 380 Volt: Triangle notching device: Length stop electr.: Rotary base: Moveable: Foot switch: Motorized 4-way profile steel shear on a rotating base and mobile. The machine can also be used for hole punching by purchasing a hole punching device (instead of a notcher). Photo 5 shows which tools the punching device can optionally be equipped with. All performance specifications refer to a material strength of 450N/mm². Machine dealer with own stock of 16 ...

used fat baking appliance Treif Pegasus, overhauled, 50 Hz, 400 V, 0.9 kW, control system has been renewed, completely in stainless steel version, weight: 168 kg

Door closer, floor door closer, closing mechanism -Manufacturer: Geze, Pendulo C door closer, unused -Function: Swing door 90 DEGREE - only locks at 0 degrees - 90 DEGREE -Art.No.: 3000-002336 H06-14-00-00 -Number: 44 door closers available -Price: per piece -Dimensions: 315/45/H65 mm -Weight: 1.3 kg

Precision balance, spring balance, tension force gauge -Manufacturer: Pesola, precision spring balance type Macro-Line 80196 -Measuring range: 200 Newton -Division: 2 N -Dimensions: 400/40/H40 mm -Weight: 0.5 kg

Used Fette tablet press model Perfecta 3000. 45 station. Initial pressing force 230 Kn. Main pressing force 100 Kn. Max tablet diameter – 16 mm. Max tablet filling depth 18 mm. Capacity 486000 tablets/hour. EU-B 19 mm tooling with the machine. Machine manufactured in 1995, overhauled in 2004.

Diesel generator with Perkins engine Rolls,Royce in a quiet container. With control panel

PART NUMBER: 7531 Specifications: Equipment: -plate - Tape feeder -guillotine - glue tank (granules) - 3 pressure rollers - Ready-to-use saw-cutting unit - 2 trimming units for edge shaping (radial cutters) - 2 polishers - min workpiece length 140mm - min workpiece width 60mm - thickness of the veneered element 10-55mm - edge tape thickness 0.4-3mm - steady rest sliding out of the top - motor power 5.6kW - extraction spigot diameter 120mm - dimensions length/width/height 3480x1050x1020mm - weight about 900kg Advantages: – unpainted – made in Austria – very good condition – used edgebander Net price: 18900 PLN Net price: 4395 EUR depending on the price 4.30 EUR (Prices may change with higher fluctuations)

Used double spiral mixer VMI, type: Petrin Kneadster KN 250 -in bakery condition- - 2 kneading machines incl. 4 extendable tank wagons for 250 kg dough - Machine with double kneading arms - Fast and even dough preparation without heating - All in stainless steel - Incl. boiler lifter for tipping onto a work table -El. Connection: 400 V, 50 Hz, 80 A, 55.3 kW - Protection class: IP 54 The dough mixers are in good condition and ready for immediate use. More pictures on request. Viewing and test run are possible.

Manufacturer: Bell Maschinenfabrik Year of Manufacture: 1988/1989 Design: Horizontal Nozzles: 2 Flow Rate (Q): 2.1 m³/s Net Head (H Net): 209.5 m Power Output (P): 3750 kW Speed: 429 min⁻¹ Operating Hours: 285,000 by end of November 2024 Pelton Wheel: PN25 DN 700 The turbine is sold completely with bearing and control hydraulics, as well as turbine governor, controller, Pelton wheel, and housings, along with supply pipes. Spare runner (11,000 operating hours) is available. Optionally, the generator, including the turbine bearings from AvK, can also be taken over: 10.2 kV, air-cooled. Find more here - / Contact us at -

Bread slicer Treif Model: Pegasus Stainless steel version Manual operation Cutting width 4 - 14mm Cutting machine mobile Connection 400V, 16A-CEE plug Approx. dimensions: 1000 x 700 x 1200 mm, WxDxH Machine Visit our bakery machine park!

Still Water PET Bottling Line – 16,000 BPH (2018) Complete still water bottling line designed for high-efficiency production of small-format PET bottles with thermoseal lids. The line is suitable for filling 100 ml, 150 ml, and 200 ml PET bottles and includes blow molding, filling, sealing, labeling, packing, palletizing, and wrapping equipment. General Information - Application: Still / non-carbonated water - Bottle Material: PET bottles with thermoseal lid - Output Capacity: 16,000 bottles per hour - Bottle Sizes: 100 ml, 150 ml, 200 ml - Year of Manufacturing: 2018 Production Configuration - Combi Machines: 2 units (Blow Moulder + Filler + Sealer) - Machine Speed: 8,000 BPH each - Preform Type: Flat Neck – 6.39 g - Sealing System: Thermoseal neck Filling and Sealing Stations - Filling Station: Two-step system with two stations - Each station equipped with 8  ...

pressure: 400 t throat: 1140 mm stroke: 600 mm table surface area: 2000x1000 mm Plate: 4000x1000x300 mm ram head dimension: 2000x1040 mm Cylinder: 300 mm Daylight: 650 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: 3,9x4x4,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 t punching cross-cut in cmm: -- stroke: 100 mm throat: 510 mm work height max.: 1100 mm Twist power: 31 Durchm. in 25 mm channels - flange: 100-400 mm Number of ventilators: 80-400 mm : 100-400 mm : 100-550 mm punch stroke: bei 20 mm Hub: 60 p.Min sheet thickness max.: bei Luftbiegung: 10 mm total power requirement: 7,5 kW weight of the machine ca.: 2,4 t dimensions of the machine ca.: 1,7 x 0,9 x 2,3 m Video available on our website.: Condition: ready for operation: Electric 380 Volt: Diverse punches and dies: Foot pedal: Machinefeets: Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: 4JET Model: Pearl M Year of Manufacture: 2020 - Main Terminal: 400 VAC, 3P/N/PE, 50/60Hz, 63A Laser Specifications: - Laser Model: HyperRapid NX 50 - Wavelength: 1064 nm - Laser Output Max: 80 W - Pulse Energy Max: 1.5 mJ - Pulse Duration Min: 8 ps Application: - Pearl Cut Application: Laser Category 1 Find more here - / Contact us at -

We offer Peri Trio Elements 270 x 240 with 50% discount newly covered with original Peri Finply formlining 32 x Peri Trio Element TR 270 x 240 á 3409,00€ - 55% Discount = 1704,50€ / Piece Net price You bid on 1 element Peri Trio 270 x 240 sold separately. Subject to sale Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Office/ Storage Address: Birkenstraße 15 89185 Humlangen- Hüttisheim Ulm Registration Court: HRA722943 VAT ID NUMBER: DE279047055

bench vice, metalworker & vice, parallel vice -Jaw width: 135 mm -Wingspan: 215 mm -Number: 3x vices available -Price: per piece -Dimensions: 440/200/H490 mm -Weight: 26 kg

machining unit, drilling machine, drilling machine, pillar drilling machine, multi-spindle drilling machine, row drilling machine, dowel drilling machine -Manufacturer: Perske, Quill machining unit -Drive: 1.5 kW -Speed: 2800 rpm -Stroke: 55 mm -Dimensions: 720/200/H175 mm -Weight: 38 kg

hydraulic pump, oil pump, hydraulic unit, hydraulic pump, hydraulic pump, tandem pump -Manufacturer: Pedro Roquet, Double hydraulic pump -Type: 1LS9 3DJ23FR 1L03DB24R -Shaft: conical Ø 14-17 mm -Flange: Ø 80 mm -Quantity: 1x pump available -Dimensions: 210/155/H120 mm -Weight: 5.2 kg

ball valve, ball valve internal thread, metal ball valve -Manufacturer: Pekos, 2/2-way metal ball valve stainless steel unused -Type: K806 SGSGV -Size: 1 -Number: 4x ball valve available -Price: per piece -Dimensions: 235/80/H140 mm -Weight: 3.2 kg/piece

Venjakob Perfect paint shop: - Manufacturer: Venjakob - Year of construction: 2013 - Working width: 1,300mm - Max. part length 6,500mm - In U-shape with angle transfer Composed of: 1. Covering tape, length 3,050mm 2. Free space for a grinding machine (option) 3. Automatic sprayer VEN SPRAY PERFECT, length 5,510mm 4. Evaporation dryer OIR, length 6,000mm 5. VEN DRY AIR JET nozzle dryer, length 4,160mm 6. 180 degree angle transfer, with nozzle dryer 7. Supply air system for angle transfer, 25,000m³/h 8. VEN DRY AIR JET nozzle dryer, length 5,160mm 4 Pieces IR Illuminators 9. VEN DRY AIR JET nozzle dryer, length 5,160mm 4 Pieces IR Illuminators 10. VEN DRY AIR JET nozzle dryer, length 5,160mm 4 Pieces IR Illuminators 11. 3D-UV Dryer, VEN DRY UV, GA + HG 12. Removal area, tape of UV dryer 13. Supply air system hall, 30,000m³/h Further information: On  ...

Offer 25086 Specifications: - Flat steel shears - Flat steel - 400 x 120 mm - or: 300 x 22 mm - Profile steel shears - L- and T-irons at 90° 150 x 12 mm - Square steel / round steel 40 / 40 mm - Notches - With square clinker for sheet metal up to approx. 13 mm - Latch depth approx. 70 mm - Latch width approx. 52 mm - Hole punch - Punching force approx. 100 t - Projection 510 mm - Stroke approx. 10 to 50 mm - Perforates in steel up to Ø 31 in 25 mm - E. contact stop - div. 10 pcs. punches + dies - Drive 400 V / 5.5 kW - Space required: W 1100 x H 2000 x D 1700 mm - Weight approx. 2100 kg

New hot press, hydraulically Brand: ITALPRESSE Type XL/6 30-13 PEA Golden electric heating plate surface anodized to ensure high surface hardness and excellent corrision protection. - Electrical - heating plates: 3000 x 1300 mm - Total pressure: 120 to. - Number of hot plates: 2 pc. - Number of floors: 1 pc. - Stroke: 350 mm - Day light opening: 350 mm - All-round feeding - Number of cylinders: 6 pc. - Diameter of cylinder: 85 mm - Power consumption (hydraulic unit): 3 kW - Electric - combi - heating plates made out of two components: Aluminium - electric - heating plate Iso printing plate - Heating power 22 KW - High pressure isolation plates - Operating temperature: 70 - 90° C. - Max. Temperature: 120° C. - Supply: 400V/50 Hz - Safety accordance with CE standard Standard equipment: - Movement of the press table with rack and pinion parallel guidance at t ...

Several milling motors Make: Perske - in different versions available from stock (0,2 till 8 kW) Price on request (depending on version) Please let us know which specification you are looking for: - power - shaft-type - torque - type - voltage

Type 210 standard 13 Shear: 13 mm Flat steel: 150 x 16 mm Punching:nbsp; example: dia 25 in 16 mm Stroke: 27 mm 50 ton Notching: 12 mm L/T steel: 80 x 10 mm U steel: 140 mm I steel: 160 mm round bar steel: 42 mm square bar steel: 38 mm L-profile 90°: 110 x 10 mm L-profile 45°: 90 x 9 mm Punching pressure: 50 ton Power needed: 3 kW Length: 1270 mm Depth: 800 mm Height: 2180 mm Weight: 2 ton

Wood band saw, band saw machine, band saw, vertical band saw, metal band saw -Manufacturer: PEHAKA Petzing

Manufacturer: Perske Umformer, Type: 30 DW 14/2, Hz 1: 50, Hz 2: 100, KVA: 30,

Manufacturer: Perske Umformer, Type: DA 12-2, Amper 1: 43, Hz 1: 50, Hz 2: 100,