128,272 used machines on RESALE, but how to find them? Machine Search
Used Used Kosme Complete PET Bottling Line: Year: 2018 Condition: Good Speed: 5.300 bph ? 500 ml PET Kosme Preform Hopper ? year 2018 Kosme Preform Elevator ? year 2018 Kosme Preform Disorderer ? year 2018 Kosme Blow Molding Machine ? year 2018 ATS Chiller Air Conveyor Mixer for Caramelizing Techniques ? year 2016 Kosme Filler ? year 2017 AVE Capper ? year 1999 Kosme Labeler ? year 2018 Mixed Conveyors Shrink Machine SMI ? year 2001 SMI Thermal Tunnel Suitable for packs 6 / 12 / 24 Videojet Date Coder Logopak Box Labeler 2012 Code: NP 668 More details: https://bottlingscout.com
Used Used PET Bottling Line Krones 30.000 bph: Year: 2006 Condition: Good COMPLETE BOTTLING LINE KRONES 30.000 bph Product: still water Speed: 30.000 bph ? 1.5 lt PET Preform tipper ? 2018 Model: m.tanner ag/prologic Caps elevator Gassner ? 2006 Manufacturer: gassner Preform aligner (part of the blow molding machine) ? 2006 Monobloc with blow moulder, filler and capping machine Blow molding machine ? 2006 Brand: Krones Model: krones contiform s20 Type: Rotating number of stamp: 20 Filler ? 2006 Model: krones volumetic Direction: Counterclockwise Number of filling valves: 84 Type of filling system: gravity flowmeter Capper: (it is part of the monoblock) ? 2006 Number of heads: 18 Type of cap: alaska 3 Principles Distribution system: pick & place Nitrogen dispenser ? 2006 Model: cryotech international Inspector for level control and cap ? 2006 Model: krones checkmat Bottle transport ? 2006 ...
Perkins Olympian GEH 200 kVA Supersilent generatorset, With:, - 400 Ampère breaker, - Supersilent canopy, - Internal fuel tank with a capicity off 500 liters, - Auto start and manual start, - Oil drain pump, - Intercooler, - Turbo, - Engine protection, - Battery charger, - Control panel, - Internal exhaust system, Motor Brand : Perkins, Type : 1300 Serie, Cooling : Watercooled, Cilinders : 6, Rpm : 1.500 rpm, Generator Brand : Olympian, Type : GEH200, Capicity : 200 kVA, Phase : 3, Cos phi : 0,8, Voltage : 230/ 400 Volt
Edge banding machine Sumbel Perkeo 90; cleaned and tested; Working width 90mm; 1 roller; suitable for cold glue. Edge gluing machine Sumbel Perkeo 90; cleaned and checked; working width 90mm; one roller; used for cold glue.
cutting width: 92 cm feeding depth: 92 cm feeding high max.: 12 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Complete PET Filling Line – Krones AG ERGOBLOC – 1.5 L – 32,000 BPH – Non-Carbonated Products – YOM 2006 For sale is a complete PET bottling and packaging line for still water and non-carbonated beverages, built around a Krones ERGOBLOC system. The line has a capacity of up to 32,000 bottles per hour (BPH) for 1.5 liter PET bottles with 28 mm or 32 mm caps. The equipment is suitable for still water and other non-carbonated beverages only. The line includes the full process from preform feeding, blowing, filling and capping to labeling, packing and palletizing, making it a complete turnkey solution for PET bottle production and packaging. General Information Manufacturer: Krones AG System: ERGOBLOC PET filling line Bottle Size: 1.5 L PET Capacity: approx. 32,000 bottles/hour Cap Size: 28 / 32 mm Products: Non-carbonated beverages (still water) Year of Manufactur ...
Complete CSD PET Bottling Line – 12,400 BPH Manufactured: 2008–2009 | Location: Germany | Available: October 2026 This complete CSD (Carbonated Soft Drink) PET bottling line is designed for efficient and reliable production of carbonated beverages. The line is composed of high-quality European equipment from leading manufacturers such as SIPA, GEA Procomac, Arol, SMI, PE Labellers, Ventilo, Robopac, and TwinPak. The system is currently still in production, ensuring excellent operational condition and immediate demonstration possibilities. General Line Data Nominal Capacity: 12,400 bottles/hour Effective Capacity: approx. 10,000 bottles/hour Bottle Sizes: 0.5 L 0.75 L 1.5 L Bottle Type: Round PET bottles Cap Types Flat Cap: PCO 1881 Sport Cap: Aptar PCO 1881 Main Equipment Blow Molding Section Blow Molding Machine: SIPA – 8 cavity system Bottle Hand ...
Laborconche, Year of manufacture and manufacturer unknown (Probably Petzholdt or Truisoma) Capacity approx. 10-15 l with vacuum connection inside stainless steel Lid can be lifted + lowered via counterweight with 2 sight glasses Stirring organ floor- + wall-stripping Motor 1.5/2.2 kW, 720/1450 rpm with temperature indicator for water, current meter Machine only ran for a little over 3200 hours Dimensions: 900 x 1300 x 1800 mm high We offer this machine for sale "in existing condition" under exclusion of any warranty/defect claims or representations. from the Hess warehouse. Lichtenau; unpackaged
Two CNC dual spindle PCB milling machines Wissner are available. Spindle power: 3.6kW, min. cutter diameter: 2mm, max. speed: 40000rpm, machining dimensions X/Y/Z: 3000mm/1250mm/100mm, max. feed rate X/Y: 20m/min, max. feed rate Z: 4m/min, clamping device: vacuum, vacuum capacity: -0.9bar, max. sheet thickness: 6mm, axes: 3, tool positions: 2x8, control: Heidenhain/CATIA V5/ASCO, years of manufacture: 2002/2003. Documentation available. An on site inspection is possible.
punching force max.: 50 t throat: 510 mm stroke: 32 mm stroke - stepless adjustable: 10 - 32 mm no. of strokes: 35 bei 10 mm Hub/min Working height: 1070 mm daylight: 350 mm table width: 255 mm dimensions: ca. 1080 x 650 x 1680 mm material layer: 630 X 535 weight: ca. 1400 kg Scraper, height-adjustable and removable, with interchangeable plate Hydraulic low-pressure finder for foot switch operation Two-stage foot switch and electrical controls Integrated hydraulic unit With punching saddle for dies no. 3 and 4, up to Ø 39.5 mm Quick-change device for punches 3 and 6 up to Ø 39.5 mm Peddinghaus blue series with material support table no. 513, dimensions 630 x 535 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
(1975) 100t IWK Eccentric Press Industrial Eccentric Press for High-Capacity Stamping This 100-ton eccentric press from 1975 features a robust electrical configuration designed for versatile industrial manufacturing. Technical Details Machine Type: Eccentric Press Manufacturer: IWK Model: PEDRS 100 Year of Manufacture: 1975 Machine Number: 22/20076/3 Circuit Diagram Number: 911 871 Nominal Force: 100t Mains Connection 1: 380 V, 3-Phase, 50 Hz, 36 A Mains Connection 2: 220 V Max. Back-up Fuse: 80 A Control Voltage: 220 V (AC) / 24 V (AC) / 24 V (DC) Lighting Voltage: 220 V
Stamford AC Generator PE734C2 Electricity generator unknown year of construction with approx. 63,000 operating hours, 415 volts V/50 Hz. Manufacturer: Stamford Model No.: PE734C2 Type: AC Synchronous Generator Serial Number: A12K489419 Power [KVA]: 1,445 Voltage [V]: 415 Frequency [Hz]: 50 Current [A]: 2.010 Speed [1/min]: 1,500 Year of manufacture: unknown Operating hours [h]: approx. 63,000 Weight [kg]: 3,000 Dimensions LxWxH [cm]: 190 x 95 x 135
BA150E D285, This 6-inch diesel-driven dirty water pump has been the best-selling model from the BA series for years., This pump set is compact and multifunctional due to its unique pump curves and large dirt passage., Common applications: sewage and waste water, surface water, ballast projects., , Capacity up to 470 m3/hour and pressure up to 38 mwk, 80 mm passage and wear plate with cutting grooves., , Discharge x suction (inch) 6 x 6, Max. capacity (m3/hour) 470, Max. head (mwc) 37, Dirt passage (mm) 80, Vacuum system (m3/hour) MP50 (50 m3/hour), Diesel engine Perkins, Max. speed (rpm) 1900, Fuel consumption at BEP (l/h) 9, Noise level (dB at 10 m) 64, Dimensions l x w x h (mm) 2270 x 1050 x 1595, Dry weight (kg) 1880, , Throughput capacity: 470 m3/h, Max. dirt passage: 80 mm, Engine brand: Perkins, Max. head: 37 MWK, Weight: 1600 kg, , Throughput capacity: 470 m3/h, Max dirt passage: ...
BA150E D285, This 6-inch diesel-driven dirty water pump has been the best-selling model from the BA series for years., This pump set is compact and multifunctional due to its unique pump curves and large dirt passage., Common applications: sewage and waste water, surface water, ballast projects., , Capacity up to 470 m3/hour and pressure up to 38 mwk, 80 mm passage and wear plate with cutting grooves., , Discharge x suction (inch) 6 x 6, Max. capacity (m3/hour) 470, Max. head (mwc) 37, Dirt passage (mm) 80, Vacuum system (m3/hour) MP50 (50 m3/hour), Diesel engine Perkins, Max. speed (rpm) 1900, Fuel consumption at BEP (l/h) 9, Noise level (dB at 10 m) 64, Dimensions l x w x h (mm) 2270 x 1050 x 1595, Dry weight (kg) 1880, , Throughput capacity: 470 m3/h, Max. dirt passage: 80 mm, Engine brand: Perkins, Max. head: 37 MWK, Weight: 1600 kg, , Throughput capacity: 470 m3/h, Max dirt passage: ...
BA150E D285, This 6-inch diesel-driven dirty water pump has been the best-selling model from the BA series for years., This pump set is compact and multifunctional due to its unique pump curves and large dirt passage., Common applications: sewage and waste water, surface water, ballast projects., , Capacity up to 470 m3/hour and pressure up to 38 mwk, 80 mm passage and wear plate with cutting grooves., , Discharge x suction (inch) 6 x 6, Max. capacity (m3/hour) 470, Max. head (mwc) 37, Dirt passage (mm) 80, Vacuum system (m3/hour) MP50 (50 m3/hour), Diesel engine Perkins, Max. speed (rpm) 1900, Fuel consumption at BEP (l/h) 9, Noise level (dB at 10 m) 64, Dimensions l x w x h (mm) 2270 x 1050 x 1595, Dry weight (kg) 1880, , Throughput capacity: 470 m3/h, Max. dirt passage: 80 mm, Engine brand: Perkins, Max. head: 37 MWK, Weight: 1600 kg, , Throughput capacity: 470 m3/h, Max dirt passage: ...
BA150E D285, This 6-inch diesel-driven dirty water pump has been the best-selling model from the BA series for years., This pump set is compact and multifunctional due to its unique pump curves and large dirt passage., Common applications: sewage and waste water, surface water, ballast projects., , Capacity up to 470 m3/hour and pressure up to 38 mwk, 80 mm passage and wear plate with cutting grooves., , Discharge x suction (inch) 6 x 6, Max. capacity (m3/hour) 470, Max. head (mwc) 37, Dirt passage (mm) 80, Vacuum system (m3/hour) MP50 (50 m3/hour), Diesel engine Perkins, Max. speed (rpm) 1900, Fuel consumption at BEP (l/h) 9, Noise level (dB at 10 m) 64, Dimensions l x w x h (mm) 2270 x 1050 x 1595, Dry weight (kg) 1880, , Throughput capacity: 470 m3/h, Max. dirt passage: 80 mm, Engine brand: Perkins, Max. head: 37 MWK, Weight: 1600 kg, , Throughput capacity: 470 m3/h, Max dirt passage: ...
pressure: 63 t stroke rate in continuous stroke: 90 min force: 2200 Nm Torque: 12500 Nm no. of strokes: 56 / 90 Hub/min Labour performance: 5,5 kW sheet thickness - max.: 6,3 / 3,2 mm cutting surface: 1600 mm² distance between columns: 320 mm throat: 315 mm min. ram stroke: 8 mm max. ram stroke: 120 mm ram adjustment: 70 mm ram surface: 400 x 500 mm tool hole in ram: 40 mm tool shank hole (depth x diameter): 92 mm T-slots: 2 Stk total power requirement: 6 kW weight of the machine ca.: 5,5 t Rated force: 630 kN (63 tons) Maximum sheet thickness: 3.2 mm Ram stroke: 8–120 mm Stroke rate: 56 / 90 strokes per minute Shut height (table to ram): 560 mm Ram adjustment: 70 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Year of manufacturing: 2009 19? Monitor and Programm Side-table left with Air Side-table right with Air Air Table Photocells
1 x Perforating tool 1 x Creasing tool width 80cm
1 x Perforating tool 1 x Creasing tool width 80cm
Item No.: PD-DEF4-SM - Filter area 4m² - With integrated residual filtration and tilting rail for opening the pressure vessel - With new safety valve - Dosing pump HB 43 with stainless steel pump head - Thread 38Pf - 1 year functional warranty
diameter range 8-16 mm shaft length under head 25-160 mm max. thread length 80 mm output pieces/min 100
diameter range 16 mm shaft length under head 25 -160 mm output pieces/min 110
tube feeder for studs and headless parts diameter range 6-12mm shaft length under head 95 mm max. thread length 90 mm output pieces/min 55
diameter range 6 mm shaft length under head 145 mm cutting length 165 mm output - pieces/min 100
diameter range 3-6,5mm shaft length under head 8-75 mm max. cut-off length 100 mm output pieces/min 150
diameter range 5,0-10 mm shaft length under head 120 mm max. cutting length 170 mm output- piece/min 130
diameter range 8-16 mm shaft length under head 25-180 mm max. cut-off length 220 mm output - pieces/min 70
diameter range 10- 18 mm number of dies 4 number of stations 5 cutting length 155 mm shaft length under head 125 mm output - pieces/min 90 press power 200 to max diameter of the head 35 mm
diameter range 12 mm number of dies 4 number of stations 5 cutting length 100 mm shaft length under head 80 mm output - pieces/min 125 press power 65 to
Frequency converter, frequency transformer, drive converter, controller, variable speed drive -Manufacturer: Perske, frequency converter from BRANDT KM 36 edgebanding machine -Type: 5 DW 58-6 / DA 58-2 -Input: 380 V 50 Hz -Output: 220 V 200 Hz -Power output: 5 kVA -Protection class: IP54 -Dimensions: 610/300/H235 mm -Weight: 83 kg
Modular aggregate unit, format processing unit, machining unit, milling unit, form milling unit, jointing milling unit, end-cutting unit, double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -Manufacturer: Homag, cutting units from edgebanding machine BRANDT KM 36 -Engines: Homag type LF-40-L / Perske KNS 22.08-2 -Power: 0.27 kW / 12000 rpm / 10800 rpm -Voltage: 220 V / 200 Hz -Pneumatic components: Bosch -Individual components: see photos -Price/Sale: complete -Overall dimensions: 500/560/H670 mm -Weight: 51 kg
Electric motor, three-phase motor -Manufacturer: Perske, electric motor type NS80.10/8/2 -Power: 0.37/1.5 kW -Speed: 700/2900 rpm -Shaft: Ø 19 mm -V-belt pulley: Berges, symmetrical Ø 160 mm adjustable pulley see photo -Protection class: IP 54 -Design: B3 -Dimensions: 400/250/H200 mm -Weight: 40 kg
Hand lever shears, long-blade sheet metal and round steel shears, sheet metal shears -Manufacturer: Peddinghaus sheet metal and round steel shear type 1 BR 5 -Steel sheet: up to 5 mm -Round steel: up to 11 mm -Blade length: 150 mm -Lever arm with: safety spring -Quantity: 1x lever scissors available -Price: per piece -Dimensions: 275/100/H1180 mm -Weight: 11 kg/pc.
Centrifugal pump, water pump, peripheral pump, domestic water pump, cooling water pump -Manufacturer: Pedrollo, Peripheral pump surface pump type PK60-1 -Connection: 220/380 volts -Power: 0.37 kW -Speed: 2900 rpm -Flow rate: max. 40 l/min -Suction height: max 8 m -Quantity: 1x Pumps Available -Price: per piece -Dimensions: 300/140/H153 mm -Weight: 5.9 kg/pc.
Modular aggregate unit, format processing unit, machining unit, milling unit, form milling unit, jointing milling unit, end-cutting unit, double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG milling unit for: joint milling -with: heavy dovetail guide -Milling unit: swiveling -3x: Perske Motors -Engine 1: Type KCS 70.12-2 D -Power: 3/4.4 kW -Voltage: 220/380/380 Volts -Frequency: 50/100 Hz -Speed: 2880/5880 rpm -Engine 2: Type KCS 70.12-2 D -Power: 3/4.4 kW -Voltage: 220/380/380 Volts -Frequency: 50/100 Hz -Speed: 2880/5880 rpm -Motor 3: Type KNS 51.14-2 D -Power: 1/2 kW -Voltage: 220/380/380 Volts -Frequency: 50/100 Hz -Speed: 2750/5700 rpm -Other engines with different performance levels are available from us for an additional charge. -Number: 1x joining milling unit available -Price: per piece -Dimensions: 1370/110 ...
Hand lever shears, long-blade sheet metal and round steel shears -Peddinghau:s 4R/7, long-blade sheet metal and round steel shears -Particularly stable scissor body made of: tempered steel -Lever arm with: safety spring -Infinitely adjustable: hold-down device -Steel sheet up to: 7 mm -Round steel up to: 20 mm -Square: 18 mm -Cutting length up to: 170 mm -Performance rating for: Material with a strength of 450 N/mm² -Dimensions: 770/650/H2250 mm -Weight: 91 kg
Modular aggregate unit, format processing unit, machining unit, milling unit, form milling unit, jointing milling unit, end-cutting unit, double-end tenoner, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -for sawing: edges on the front and back edges of the workpiece -1x: Motor Perske -Type: KN60.09/2 -Power: 1.5 kW -Voltage: 220/380 volts -Frequency: 50 Hz -Speed: 2810 rpm -Dimensions: 900/575/H450 mm -Weight: 112 kg
Rubber disc coupling, claw coupling, connecting coupling, torsionally flexible coupling -Manufacturer: Stromag-Periflex -Type: PS 34-2 -V.-No.: 467/1 -Ident No.: 699070500 -Outer diameter: 337 mm -Inside diameter: 103 mm -Pitch circle outside: 315 mm -Hole circle inside: 138 mm -Number: 6x clutch discs available -Price: per piece -Dimensions: 337/337/H41 mm -Weight: 2.5 kg
Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Voltage: 165 volts -Power: 0.22 kW 17250 rpm at 300 Hz -Collet holder: Ø 8 mm -Thread: right -Number: 3x engines available -Price: per piece -Dimensions: 200/80/H90 mm -Weight: 1.8 kg
Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Voltage: 165 volts -Power: Motor 0.22 kW 17250 rpm at 300 Hz -Socket: Ø 15 mm -Thread: right -Number: 5x motors available -Price: per piece -Dimensions: 200/70/H90 mm -Weight: 1.8 kg
Double end profiler, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Voltage: 133 volts -Power: 0.15 kW 11160 rpm at 200 Hz -Recording: Ø 15 mm -Thread on the left -Number: 6x motors available -Price: per piece -Dimensions: 200/70/H90 mm -Weight: 1.7 kg
Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor -Manufacturer: Perske, milling motor type VS 31.09/2 -Power: 0.4 kW 11300 rpm at 200 Hz -Voltage: 133 volts -Shaft mount: Ø 20 x 10 mm -Number: 3x engines available -Price: per piece -Dimensions: 250/60/H155 mm / 240/60/H140 mm -Weight: 3.4 kg/pc.
Profile steel knife, shearing tool, cutting tool, cutting tool, punching tool, punch, punching die, punching punch -Shearing tool for square steel: 25/40/50 mm -Shearing tool for round steel: 25/40/55 mm -Type: 4412151064 -Type: 4412151063 -1x dimensions: 220/206/H30 mm -1x dimensions: 215/205/H30 mm -Weight: 16 kg
Unit construction kit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG milling unit can be rebated, grooved and profiled -with keying of 2 sides each -Milling unit: swiveling -Number: 2 x motors Perske -Power: 0.15 kW -Voltage: 133 volts -Frequency: 200 Hz -Speed: 11,160 rpm -Other engines with other services in stock for an additional charge -Dimensions: 470/400/H620 mm -Weight: 55 kg
Tenoning machine, tenoning machine, tenon hammer, slot rotor, finger jointing system -Recovering rotor: 2.2 kW 5650 rpm -Socket: Ø 30 mm -Saw motor: 3.5 kW 2870 rpm -Bore heads: 0.8 kW 2820 rpm -Adjustable drilling distance: 230-560 mm -Frequency converter Perske type: 7.5DW10/2 100 Hz 7.5 kVA -Length stop -Workpiece clamping: pneumatic -pneumatic feed -Dimensions: 1520/1800/H1400 mm -Weight: 1600 kg
Modular unit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG milling unit can be rebated, grooved and profiled -with keying of 2 sides each -Milling unit: swiveling -2x engines Perske -Power: 0.6 kW -Voltage: 165 volts -Frequency: 300 Hz -Speed: 18,000 rpm -Other engines with other services in stock for an additional charge -Dimensions: 630/420/H700 mm -Weight: 56 kg
Modular unit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG milling unit for joint milling -with heavy dovetail guide -Milling unit: swiveling -2x engines Perske -Motor 1 type: KNS 71.16/201 -Power: 4.4/6.6 kW -Voltage: 220/380/380 volts -Frequency: 50/100 Hz -Speed: 2860/5870 rpm -Motor 2 type: MP-10-L -Power: 1.0/1.5 kW -Voltage: 220/380/380 volts -Frequency: 50/100 Hz -Speed: 3000/6000 rpm -Other engines with other services in stock for an additional charge -Number: 1x joint milling units available -Price: per piece -Dimensions: 900/1000/H1030 mm -Weight: 360 kg
Modular unit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG milling unit for joint milling -with heavy dovetail guide -Milling unit: swiveling -1x engines Perske -Motor type: KCS 70.12-2D -Power: 3.0/4.4 kW -Voltage: 220/380/380 volts -Frequency: 50/100 Hz -Speed: 2880/5880 rpm -Other engines with other services in stock for an additional charge -Dimensions: 1150/600/H1330 mm -Weight: 346 kg
Modular unit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine -HOMAG milling unit can be rebated, grooved and profiled -with keying of 2 sides each -Milling unit: swiveling -2x engines Perske -Power: 0.6 kW -Voltage: 165 volts -Frequency: 300 Hz -Speed: 18,000 rpm -Other engines with other services in stock for an additional charge -Dimensions: 500/500/H600 mm -Weight: 54 kg
maximum number of results exceeded
please refine your search
