pe extrusion used for sale

Max. punching and shearing capacity: 400 kN For example, punches 20 mm holes in 15 mm steel Shears on the flat steel shear on 120 mm to 12 mm steel Further technical data on request With an assortment of stamps and dies as desired

Size: 800 x 600 mm Equipments: Max. Load capacity: 1000 kg Max. Dimension: 800 x 600 mm

; Gross weight [kg]: 4550; Engine: Perkins 2206C-E13TAG2; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 580

; Power [PS]: 699; Gross weight [kg]: 8425; Engine: Perkins 2806D-E18TAG1A; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Coolant heater and Battery charger; Water Tank Volume [l]: 975

; Gross weight [kg]: 8950; Engine: Perkins 4006-23TAG3A; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 1360

; Gross weight [kg]: 9896; Registration Number: 1; Engine: Perkins 4008-30TAG3; Accessories: Tanker, Battery, Control Panel, Stahldach, Including ATS System for Automatic start/stop when the grid fails.; Water Tank Volume [l]: 2060

3 Pieces Container Units with Diesel Engine Engine Type: Perkins 4016-61 TRG2 Year: 2023 Hours: 2 Power: 2000 kVA Cooling: Water, Radiator Speed: 1500 1/min Tank: approx. 2000 litres Generator: Stamford HVSI804R Voltage: 10 kV, 50 Hz Excellent condition, like new! Was used as an emergency power system. Subject to prior sale - errors possible! Internal reference number: E-1004-97

; Gross weight [kg]: 16780; Engine: Perkins 4012-46TAG2A; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 2000

; Gross weight [kg]: 9780; Engine: Perkins 4012-46TAG2A; Accessories: Tanker, Control Panel; Water Tank Volume [l]: 2000

; Gross weight [kg]: 22100; Engine: Perkins 4016-TAG2A; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 2000

; Gross weight [kg]: 696; Engine: Perkins 403D-11G; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including: sockets 32A - 32A - 16A 5P - 16A 3P; Water Tank Volume [l]: 55

Size: 480 x 650 mm Equipments: 1 X Inking Unit 1 X Numbering Shaft 2 X Mounting Rings 2 X Linear Perforating Arms

; Gross weight [kg]: 746; Engine: Perkins 403D-15; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : sockets 63A - 32A - 16A 5P - 16A 3P; Water Tank Volume [l]: 55

We offer Peri Trio formwork accessories, used Balancing latch TAR 85, 65% discount on new price for 68,08EUR net 405 x Balancing Bolt TAR 85 a 68,08EUR You are bidding on 1 piece Prices are excl. VAT and transport Subject to sale If you have any questions, please contact Mr. Becker at 0176-700 44689 Purchase and sale of scaffolding, formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Office warehouse address: Birkenstraße 15 89185 Humlangen- Hüttisheim Ulm Registration Court: HRA722943 VAT ID NUMBER: DE279047055

Size: 520 x 740 mm Equipments: 1 cam left and right 2 X Mounting Rings 2 Perforating arm 1 X Inking Unit 1 X Numbering Shaft

Size: 520 x 740 mm Equipments: suitable for Heidelberg, Komori, KBA, Manroland, Ryobi, Sakurai as is Easy installation and removal

; Gross weight [kg]: 1430; Engine: Perkins 404J-22G; Accessories: Tanker, Battery, Control Panel, Stahldach, - Super silent enclosure, - Socket 32A, - Coolant heater and battery charger; Water Tank Volume [l]: 500

System designation D8-IPS700 Configuration in-line 6 Crankshaft power, kW (hp) 405 (550) 2900 rpm Propshaft power, kW (hp) 384 (523) 2900 rpm Aspiration Twin entry turbo and compressor

; Gross weight [kg]: 2580; Engine: Perkins 1206-E70TTAG3; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: coolant heater and battery charger, Including: sockets 63A - 32A - 16A 5P - 16A; Water Tank Volume [l]: 380

; Gross weight [kg]: 12270; Engine: Perkins 4008TAG3; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Coolant heater and battery charger; Water Tank Volume [l]: 1460

Inv. Num. : 8405 Type: Peddimax No 1 Producer: Peddinghaus Created: 2019 Parameters: Operating hours: 150 h Strength: 140 t Pressure: 300 bar Equipment: Flaps

System designation D8-IPS800 Configuration in-line 6 Crankshaft power, kW (hp) 441 (600) 3000 rpm Propshaft power, kW (hp) 419 (570) 3000 rpm

Keeldiepte: 405 mm slag: 21 mm 55 slagen per minuut Punching pressure: 45 ton Max punching dia: Ø 27 in 13 mm / Ø 39 in 9 mm Power needed: 2,2 kW Length: 1300 mm Depth: 800 mm Height: 2050 mm Weight: 1000 kg

The DYNAJET 500th HELI Blue Performance is designed for professional users who need a high-performance, trailer-based high-pressure waterjet system for demanding industrial applications. With hot and cold water operation up to 500 bar and a maximum flow rate of 30 l/min, it is ideal for tasks such as surface preparation, paint and rust removal, concrete renovation and maritime maintenance. Its robust trailer design is designed for demanding daily operations and transport between job sites. The single-axis design supports easy maneuverability, while the integrated single-point lifting eye allows for efficient lifting and positioning when crane handling is required. The Targa design separates the motor, pump and burner area from the operator area, which supports safe and ergonomic operation while reducing noise pollution at the operator station. The colour display provides a clear ov ...

Temperature sensor, duct temperature sensor, screw-in temperature sensor, temperature sensor -Manufacturer: Kieback & Peter, temperature sensor type DN454I, unused -Item No.: 181300 -Screw-in depth: 425 mm -Quantity: 1x temperature sensor present -Dimensions: Ø 140 x 510 mm -Weight: 1.5 kg

Product designation D6-IPS650 Crankshaft power Kw/Hp 353 /480 Propshaft power, kW /Hp 339 /461 Engine speed, rpm 3700

Measuring head (CMM) rigid probe RENISHAW type PH5 + TP20 + PEL1-50Probe for measuring machineSerial: 77501 - Push button holder probe body TP20 for interchangeable modules (probe modules)Extension - type PEL 1, length 50 mmProbe attachment M8 threadHead mounting with MV shank 9.5 mm- Status indicator with 2 LEDs- Cable connection via 5-pin DIN 180 socket- 5 threaded connections M8 for touch probes (4 pieces blind plug)Total weight 280gused in good condition; used

Single-column eccentric press AMBOLD type PEEV 25.2Masch. No. 11734 / 02 Year of construction 2002Compressive force 25 ton. Projection 200 mmTable area 520 x 400 mmPlunger area 155 x 155 mmHole in table 185 x 155 mmStroke adjustment 4-80 mmPlunger adjustment 40 mmInstallation height max. 270 (largest stroke in UT, table below)Clamping pin hole 32 mmTable height adjustment approx. 150 mmPlunger strokes 160 strokes/min. Motor power 2.2 kWNet connection 400 volts, 50 Hz pneumatic clutch-brake combination

Temperature sensor, duct temperature sensor, screw-in temperature sensor, temperature sensor -Manufacturer: Kieback & Peter, temperature sensor type DN444SI, unused -Item No.: 326737 -Screw-in depth: 425 mm -Quantity: 1x temperature sensor present -Dimensions: Ø 140 x 510 mm -Weight: 1.5 kg

; Gross weight [kg]: 803; Engine: Perkins 404D-22TG; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger, Including : 32A - 32A - 16A 5P - 16A 3P; Water Tank Volume [l]: 55

; Gross weight [kg]: 798; Engine: Perkins 404A-22G1; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: coolant heater and battery charger, Including: sockets 63A - 32A - 16A 5P - 16A 3P; Water Tank Volume [l]: 55

Vertical Grinding Machine, Surface Grinding Machine DORMAC / DORIA Type PerseoCup Grinding MachineFabr. No. 786 Year of construction 1987Grinding area 500 x 250 mmMagnet 400 x 150 mmGrinding height Grinding wheel - magnet approx. 190 mmGrinding height Grinding wheel - clamping surface Table approx. 235 mmGrinding wheel diameter 175 mmTable longitudinal movement approx. 600 mmGrinding wheel speed approx. 2800 rpm. Motor power approx. 2.2 kWNerg connection 380 volts, 50 Hz manual depth delivery via handwheel, travel per

Die holder, separating tool, punching tool, punch, punch die, punch stamp, gill forming tool, die holder -Stamping tool: die holder -Hole: Ø 45 mm -Bore: Ø 33 mm -Hole spacing: 180 x Ø20 mm -Dimensions: 240/85/H120 mm -Weight: 7.3 kg

x-travel: 600 mm : ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Suitable for automatically brushing (rounding edges or deburring) the teeth on HM circular saw blades., Accessories:, Sawblade holder,, Stepless variable speed control of the sawblade drive,, Pre-selectable timer., Circular saw blade diameter: 1600 mm, Power of geared motor: 0,1 kW, Brush motor performance: 0,75 kW, Connected load approx.: 400 V / 50 Hz, Weight approx: 310 kg, Dimensions W x D x H approx.: 2400 x 850 x 1550 mm, colour: blue/grey

Punch holder, die holder, notching tool, punching tool, punch, punch die, punching die, for eccentric press, hydraulic press, quick-change punch holder -Stamp holder: Stamp holder -Hole: Ø 30 mm -Hole spacing: 94x63 mm / Ø13 mm, see photos -Dimensions: 120/90/H135 mm -Weight: 4.2 kg

; Gross weight [kg]: 7970; Engine: Perkins 4008TAG3; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 1450

centrifuga, drum dia. 600 mm, drum height 400 mm, wall thickness 12 mm, throughput 3400L/h ST, drum material GS-42CrMo04V, speed 980 min-1, supply voltage 400V, rated ampere 20A

round bar steel: 28 mm square edge steel: 25 mm L-beam: 80 x 8 mm notching cap. mild steel max.: 7 mm cutting capacity of the vertical shear: 350 kN Punch power: 190 kN shear: flat material: 100 x 11 mm shear: length of knifes: ca. 175 mm total power requirement: 1,5 kW weight of the machine ca.: 0,5 t dimensions of machine L x W x H: 1,0 x 0,5 x 1,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

; Gross weight [kg]: 10500; Engine: 4012-46TAG3A; Accessories: Tanker, Control Panel; Water Tank Volume [l]: 2000

; Gross weight [kg]: 11430; Engine: Perkins 4008TAG2A; Accessories: Tanker, Battery, Control Panel, Stahldach, Including : coolant heater and battery charger; Water Tank Volume [l]: 1460

: 5 weight: 5 t : . The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

nominal power: 63 t stroke rate in continuous stroke: 90 min force: 2200 Nm Torque: 12500 Nm Labour performance: 5,5 kW sheet thickness - max.: 6,3 / 3,2 mm cutting surface: 1600 mm² distance between columns: 320 mm throat: 315 mm min. ram stroke: 8 mm max. ram stroke: 120 mm ram adjustment: 70 mm ram surface: 400 x 500 mm tool hole in ram: 40 mm tool shank hole (depth x diameter): 92 mm T-slots: 2 Stk total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Installation: Indoors, material: PE100, internal dimensions X/Y: 1900mm/2200mm, internal drip tray dimensions X/Y: 2100mm/2000mm, useful volume: 6000l, liquid: HCl/Fe3Cl/H2O, density: 1.15kg/dm³, pressure: unpressurized. On-site inspection is possible.

grinding length: 500 mm grinding width: 300 mm grinding height: 475 mm workpiece height: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m - control SPS NK - electro magnet - coolant device Technische Daten / technical details: Schleiflänge / grinding length 500 mm Schleifbreite / grinding width 300 mm Schleifhöhe / grinding height 475 mm Elektromagnetabmessungen / electro magnet dimensions 500x250 mm Längsachse X / table travel X 600 mm Querachse Z / cross travel Z 270 mm Vertikalachse Y / vertical travel Y 475 mm Drehzahl Schleifscheibe / speed of grinding wheel 1440/2900 UpM / rpm Schleifscheibe / grinding wheel 300x50x76,2 mm Antriebsleistung Schleifspindel / drive capacity grinding spindle 5,7 kW Gewicht der Maschine ca. / weight ca. 3700 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich ...

Over 80 years experience in maintenance., Expert that jointly reflects on the ideal solution for your situation., 1,000 hours or one-year guarantee: optimal reliability., Available 24/7., Quickservice., We can always supply a replacement generator., Wide range of stock that can be supplied immediately.; Engine: 4006-23TAG3A; Accessories: Product features:

max. wheel diameter: --- mm gear width: --- mm max. module: --- min. module: --- total power requirement: --- kW weight of the machine ca.: --- t dimensions of the machine ca.: --- m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

For the automatic powder plant, conveys powder coating up to 20m in an even and 8kg quantity PDF with all details available, see also powceq com

Over 80 years experience in maintenance., Expert that jointly reflects on the ideal solution for your situation., 1,000 hours or one-year guarantee: optimal reliability., Available 24/7., Quickservice., We can always supply a replacement generator., Wide range of stock that can be supplied immediately.; Engine: 4008TAG2A; Accessories: Product features:

STORK PEGASUS ROTARY SCREEN PRINTER STORK PEGASUS ROTARY SCREEN PRINTER. TYPE 3200/24/20 .Year 2001 20 colours installed on a 24 position print block. Max printing width 3200mm Repeat sizes 640/914mm . Magnet System print paste application. Comprising : High entry with fabric guide rollers E+L KF 2020 edge guiders ,dust extraction unit. Reconditioned and upgraded January, 2024 Fabric passage onto a Curved Plate with Thermoplast , Wet Gluing.Belt Washing. STORK APOLLO Dryer ,Type 3200. 2 compartments ,Gas heated with support conveyor. Ext with fabric take off rollers and plaiter. Complete Engraving machines included along with this machine. Find more here - .ucymachines/ Contact us at - sales@ucymachines