We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,626 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
FOR SALE ... AURA MARINE BOOSTER UNIT HAVE A GDY SIR; WE VE COMPLETE AURA MARINE BOOSTER UNIT . IT IS IN GOOD CONDATION AND READY TO LOAD ON TRUCK. BOOSTER UNIT USED AT 10000kW ENGINE PLS FIND SPECT AT BELOW TYPE : AMB-M - 18 - SS NO : 6719 YOB : 2006 APROVED : BV MADE IN : FINLAND IF YOU HAVE ANY QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US . Capt. Ayhan Ugurluba BEST Regards ; Aliaga Marine Services E mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 90 Mobile: +905556084850 aliagamarine.com TURKEY
used
used
WSM Stationary screwdriving unit screwdriving station Assembly of parts for car radios and navigation systems and for testing them. The assembly station is surrounded by a protective enclosure. The service doors are equipped with interlocking monitoring switches. The doors are locked in automatic mode and can only be opened when the automazik stop or in manual mode after pressing the doors on the control panel. When the door is open, automatic operation cannot be started. Functional sequence The station is equipped with the pre-assembled assembly via the transfer belt. The work steps of the automatic station with a run of a WT are described below. In normal operation, all 3 stations work in parallel. - Positioning the WT with the pre-assembled assembly in St.2.1 - Lowering the wearer with the scanner and the vision sensor - Scanning of the 3 codes (front panel, fro ...
used
Meurer Machine type: CM/HBB40-T80 Built :2000 V:400/230 Kw:19
used
CNC Universal circular grinding machine SHU321C Brand new, never used. Control FANUC Series Oi-TC 2-axes machine. Diameter of grinding workpiece -external 8-320 mm -internal 30-250 mm Center height 165 mm Maximum grinding length -external grinding (center grinding) 710 mm -internal grinding (in chuck) 135 mm Maximum angle of table rotation -clockwise 3 degrees -counterclockwise 11 degrees Grinding wheel -dimensions for external grinding 450x50x203 mm -peripheral speed 35 m / sec Rotation angle of the grinding wheel ± 90 degrees Front saddle -30 degrees clockwise rotation angle -90 degrees rotation angle -speed range for external grinding 30-400 rpm Back saddle -size of the fixed center Morse N4 -Pinolite stroke 35 mm Cross feeding range 0.1- 4000 mm/min Range of longitudinal feeds 0.05-8 m / min Minimum cross feed 0.0005 mm Main motor power kW 5.5
used
We offer a generator set in a container with DEUTZ (MWM) engine - TBG 616 V12K. Engine is completely overhauled. Electrical power - 450 kW Built - 2001 Engine hours - approx. 63000 Bh Control - a new (approx. 2000 Bh) - Deif The complete CHP can be prepared and delivered at short notice. Without unit certificate!
new
Coolant storage device consisting of metal tank (tank size: 16 litres), coolant pump, hoses and fitting.
used
Hammer 16T-M2152-1pcs (136t) Hammer 10T-18KP-1pcs(104t) Hammer 5T-17KP- 1pcs (75ton) Hammer 3T-M213-1pcs(63T) Hammer 2T-M212-1pcs(40T)
used
The Comitrol® Model 1700 processor offers the highest level of versatility in the Comitrol range. It has reduction heads of 152.4 mm (6") in diameter and is available in the three configurations below. The input product depends on the reduction head style, turbine selection and spacing within the head. In general, the maximum size of the incoming product must not exceed: Cutting head: 63.5 mm (2-1/2") Microcut head and cutting head: 9.5 mm (3/8") The sealed enclosure prevents the dispersion of dust, vapours and liquids when the Comitrol processor is installed in combination with a collection system. The stainless steel design ensures maximum durability and hygiene. The machine is equipped with contact parts with the stainless steel product, and offers continuous operation for uninterrupted production and simplified design for easy cleaning and maintenance. A sealed enclosure pre ...
used
Articulated rod / upper handlebars NEW Twisted 290 mm MITTE - MITTE Twisted + 2 x 80 mm= 450 mm. Thread M 20 Articulated ball 16 mm . . . . . . . . . . . Pipe thickness 34 mm Galvanised R-L thread. Manufacturer: Kramp
used
Refrigeration unit Bitzer LH104 2CC-4.2Y-40S
used
Table clamping area: 310 x 1400 mm Table movement x: 950 mm Table movement y: approx. 325/345 mm Table movement z: approx. 500 mm Spindle speeds: 20 - 1500 rpm Feeds longitudinally and transversely: 18 - 620 mm/min Feeds vertical: 18 - 620 mm/min electr. Connection: 380 V kW Space requirement: 1900 x 1600 x 1750 mm Weight: approx. 1500 kg
used
Composite equipment Bitzer with original condenser Freezer / normal cooling -4x compressor Bitzer 6F-40.2Y -Cooling capacity: 330 kW at -10oC/40oC, 180 kW at -25oC/40oC, 100 kW at -35oC/40oC -Volume: 4 x 151.6 m3 -Number of pieces in stock: 2 pieces -Refrigerant: Freon -With original condenser -In very good condition Price on request, We have many other Kealte plants : Bitzer,Copeland,Frascold,Lunite,Kueba,Guentner,Eco,Alfa-Laval,Goedhart ,Helpman
used
Ultrasonic measuring and testing unit suitable for pipes up to 200 mm in diameter Manufacturer: ConPro Type: DMCON 200 Built: 2008
used
B & K probe 8553 3.5 to 5 MHz as new
used
Refurbished overpressure valves are offered. The blow-off pressure can be preset according to your specifications.
new
: 5000 kg height: 800 mm width: 1200 mm : nein : 1200 x 100 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
: 5000 kg height: 500 mm width: 1200 mm : nein : 1200 x 100 mm : 1,2 x 0,53 x 0,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
: 15000 kg height: 790 - 1350 mm width: 2000 mm : ja : 120 x 2000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Table clamping area: 560 x 240 mm x-way: 300 mm y-way: 275 mm z-way: 200 mm Spindle holder: ISO 40 Spindle speeds: 40 - 2000 rpm Operating voltage: 380 V Total power requirement: 1.5 kW Space requirement: 1200 x 1100 x 1700 mm Weight: approx. 750 kg
used
Emolsion vacuum cleaner Make: Ringler Type: RI 502-D 4 kW 2895 rpm 400V, 50 Hz with suction hose, and various inserts Condition: barved, but functional Only to traders is sold. All information without guarantee
used
1 x Universall tool-feeding machine Lid FP 4 Built: c.1970 Very robust and rare conventional machine in good condition. Technical data: Travel: X: 700 Y: 400 Z: 450 mm Spindle speeds: 31.5 - 1,600 rpm (18 levels) Tool holder: ISO 40 Pinole stroke: 115 mm Feed in X/Y/Z Feed range: X/Y/Z 5 - 500 mm/min (infinitely adjustable) Rapid response: X/Y: 10 - 500 mm/min Z: 5 -250 mm/min (18 levels) swivel handling table Clamping area: 860 x 500 mm Accessories: 1 x horizontal counter bearing 5 x horizontal frond spine Bftj7cazem 10 x vertical fraes aufnahme 36 x tension tension ingesheis from 0.5 - 18 mm 0.5 mm rising 5 x Direct clamping pliers D: 12/14/16/18/20 mm 1 x machine vice Manual various distance rings and accessories for milling machines complete documentation The machine can be inspected at our warehouse under electricity. A 3-axis digital ...
used
2 pieces available For more information, please refer to the enclosed photos.
used
No.: 95-1523 Y.O.M.: 1995 Power: 2.5 kW new tools Dimensions LWH: 1300 x 300 x 300 mm Weight: approx. 100 kg
used
Make: KHS Innopack Type: Guarantee A 1-3000 Built: 1995 Power: 4,200 containers/h at 3 x 4 and 5 x4 bottles/containers with 10 gripper heads (manufacturer specification) and 10 GDB boxes transverse Dimensions: (LxWxH) 4000x2350x2400 Max package dimensions: 3,000 X 440 X 380 mm (LxWxH) Control: S5 Format parts: for 0.25 / 0.5 / 0.7 ltr. GDB Bottles and Boxes Special feature: Format part change with electric pulley Condition: good
used
Key data: 95 , 9
ready to work, 9 kW, 95 C
used
Key data: 95 , 9
ready to work, 9 kW, 95 C 2 pcs. available momently
used
Version Type RKV 4.3 K DK Refrigerant R 407 c Refrigerant charge kg 3.2 Cooling capacity at tw +20°C kW 12,2 Operating pressure max. bar 28 Temperature range Water flow min. °C + 10 Water flow max. °C + 25 Ambient temperature min. °C + 10 Ambient temperature max. °C + 50 Compressor at tc/to=53/15°CZR 61 Number of pcs. 1 Fully hermetic design Nominal power kW 6 Rated current A 9 Rated current max. A 11 Evaporator Plate arm exchanger version Material copper Condenser Air-cooled, axial version Material Cu tube / aluminium fins Fan FB050-VDK.4I.V4S Number of pcs. 1 Axial fan version with blade Nominal power kW 0,8 Nominal current A 1.6 Air flow m³/h 5000 Rated speed n 1290 Electronic version Digital temperature display Switching capacity AC / A 2 Dimensions Width approx. mm 750 Depth approx. mm 1050 Height approx. mm 1100 Weigh ...
used
White SC/KWT 1000 - Test chamber volume 1000l - Test chamber dimensions height with hood: 1190mm - without hood: 740mm - Width: 1560mm - Depth: 570mm Outer dimensions: height: 1370mm, width: 920mm, depth: 800mm Brine tank: 180l Temperature range: - Salt spray test: 5K above ambient temperature up to +50°C - Condensation water test: 5K above ambient temperature up to +45°C Humidity range at SC/KWT : Room humidity/saturation Air flow rate with salt spray test 2m³/h Air flow rate for standard climates: 7m³/h Compressed air min.4bar/ max 10bar Connection 1/4 inch Connection 208-240V 2.6kV 220kg Standard Type series SC Options Type Series SC and SC/KWT Ventilation device for DIN 50 014, paragraph 5 Room tem pe - ratur (standard on SC/KWT) Desalination plant Compressed air unit Precipitation collectors Precipitation recording and display Measurin ...
used
Ger RHC1500 Universal Rectifier. Indoor head. Distance between points: 1500mm. Maximum part diameter: 355mm. Point height: 180mm. Tooth diameter: 400mm. Power: 7.5hp. Weight: 4500Kgs.
Qty. 1 Second-hand Refining system using Argon Mfc.: FOSECO GmbH Model: FDU Type: Roto-Stativ Built: 2005 Max. pressure: 5 bar Capacity: 28 000 T/annum Degassing and purifying of non-ferrous metals and alloys by argon or nitrogen. Max. revolution: 400 RPM Power: 2.2 kW, 440 V, 3 ph., 50 Hz Rotor shaft length: 2000 mm Rinsing time: controlled in the range of 1-20 min. Degassing head lift: Mfc.: W. Flender Lifting speed: 3 m/min. Motor power: 0.75 kW Total weight: 1050 kg
used
Suction slot duct system for passenger cars and trucks, exhaust extraction duct unit Npnfl Complete system with suction duct, trolley, suction hose, suction blower. Length approx. 20m, 3 suction hoses Aspirator
used
Tools of a groove drawing machine Stuhlmann With partial apparatus - residual stock tool Part apparatus of a groove drawing machine Stuhlmann, without tool cabinet! With residual stock of tools according to photos.
new
Angular swivel unit, Accuracy 0.01°, SW100D4-C, Zimmer, new Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in its original packaging. Swing angle 180 [°] Torque 15 [Nm] Repeatability +/- 0.01 [°] swivel time 0.5 [s] Through bore Ø 15 [mm] Bearing load axial 2500 [N] Bearing load radial 155 [Nm] Operating pressure min. 3 [bar] Operating pressure max. 8 [bar] Operating temperature 5 ... +80 [°C] Cylinder volume per cycle 108 [cm³] Weight 6.3 [kg] 10 million maintenance free cycles, Positioning 2 positions, e ...
new
Swivel unit, OSE-A45-8, Schunk, new Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in ist original packaging. Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return the goods and we will refund the purchase price.
new
Angular swivel unit, Accuracy 0.01°, SF100-90D4-C, Zimmer, new Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in its original packaging. Swivel angle 90 [°] Torque 15 [Nm] Energy transmission pneumatic 4 [number] Swivel angle adjustable +/- 3 [°] Through bore Ø 15 [mm] Bearing load axial 2500 [N] Bearing load radial 155 [Nm] Repeatability +/- 0.01 [°] Operating pressure min. 3 [bar] Operating pressure max. 8 [bar] Nominal operating pressure 6 [bar] Operating temperature min. 5 [°C] Operating temperature max. + ...
new
Short stroke unit, linear guide, 52.25.4.0150, travel 150mm, fibro, new Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. As good as new! The part was bought from a spare parts warehouse of a company, has never been in operation, is completely new, but not in the original packaging. The drive of the unit is a plunger cylinder system with adjustable end position damping. The linear movement is alternately generated by one of the two oil-loaded cylinders. Operating pressure 80 to 120bar, Assembly and operating instructions, spare parts list and drawings Functional guarantee! For second-hand parts, we cannot provide a conventional guarantee and warranty. However, we give you a functional guarantee. If the device does not work during commissioning, you can return the goods and we will refund the purchase price.
used
Grease separator sether boiler, Type: Easy Clean Standard NS 4B completely cleaned and rinsed, grease-free and odourless. leakage test. A spout pump is included in the scope of delivery. New price was 8000,00â?¬ net. Deutschaland-wide shipping in German-speaking countries possible at an additional cost. Delivery: - Boiler grease separator Easy Clean Standard NS 4B - Sampling device DN100/150 horizontal - Spühl pump for grease separators
used
Crossing pipes in different lengths and wall strands in stock Price depending on wall thickness and length
used
# 1265 SISE Hot Channel Control Device M-Series Cabinet Type: M4U-16.00 No.: 90106B Zones 16 A used
used
Gyson Shot Blast Unit Model; Super 6
used
used
For sale are 2 Asymtec Automation 402 for PCB assembly The price is per unit Travel range approx. 300mm in the cross movement
used
Sell an ET feed fully assembled for a Uhlmann packaging machine UPS 1-4 Replacement feed overhauled
used
1 banding machine with shrink tunnel Manufacturer: Urban Maschinenbau GmbH, Germany Type: SB 500 Fully automatic linear banding system to different types of products in groups and stacked high with shrink wrap to package. The banding system works with two film roles, cross sealed. Product feed with motorized infeed conveyor, linear Motorized film reel (top and bottom) Sealing and cutting through hot clamping with electronic temperature control Control Panel for easy control of all machine functions Direction of rotation of the machine: from left to right Ventilated electric cabinet Formats / products: Length: 200 mm Width: 180 mm Height: 210 mm Capacity: up to 2,400 products / h, depending on the product integrated heat shrink tunnel Tunnel width: 500 mm / tunnel height: 220 mm Electr. Supply: 380 V, 50 Hz Dimensions: approx. 2.5 x 2.0 x 1.8 m Weig ...
used
Type: MULTI DEPOSITOR Built: 2016 function-tested and cleaned Dosage by compressed air pump 4x Pcs. Available
used
Universal milling machine vertically / horizontally from a training workshop Manufacturer Hermle Type FW801 Tool holder SK40 automatic feed in three axes Digital display in three axes Machine technically in very good condition under electricity ready for demonstration Technical data: Travel: x=350mm y=150mm z=220mm Spindle speeds from 50 to 3,150 rpm can be infinitely variable Feed speed infinitely adjustable via rotary pot from 10 to 5,000 mm/min, aisle Special price Used milling machine Hermle FW 801
used
Herbort Cube Cutter 10/10
used
used
Ultrasonic welding system used as spare part carrier with at least 30 single-welded pneumatic feed cylinder solder cylinder sands and clamps