parta u used for sale

Basic refurbished Parta U II Cladding sheets new made of stainless steel All wear parts are renewed, Machine is completely rebuilt, Chamber and rotary vane correspond to a new machine, incl. 2 Mehler/ Or Öler Conveyor belt right/left defined position stop stepless speed control Warranty 6 months Suitable for different doughs Weight ranges: 1 chamber 300-2800gr 2 Chamber 110-1250gr Optional: Drop wave Large funnel etc Machine can be tested with dough at any time Delivery and commissioning as well as training possible.

Vibronics Ultrasonic Bath Brand: Vibronics Power 1.8 kw; Serial number: 6092 Total dimensions L: 2800 mm; W: 1700 mm; H: 930 mm; Tank size: WxHxD= 1350x720x990 mm Frequency 25 kHz equipped with 4x generators

Cooling unit Water recooling unit DALEX type DRF 2 Masch. No. 38913719 Year of construction 1989 Volume flow 0.35 m3/h Cooling capacity 1950 Watt Operating pressure 2 to 3 bar refrigerant R 134a Device was converted from R12 to R134a Operating overpressure 18 bar Pipe connection thread 3/4? Tank volume 600 x 400 x 350 mm = approx. 80 litres Mains connection 380 volts , 50 Hz Space requirement L x W x H 900 x 800 x 1020 mm Weight 100 kg good condition; used

Reel on and off reel, reel GSW SCHWABE Type LHD 50/800 Probe Double unwinding reel, double uncoiler Fabr. No. 5775 Year of construction approx. 1995 Coil weight 50 kg per side Coil width max. 130 mm Coil inner diameter 155 - 445 mm Coil outer diameter 850 mm Plant discs 850 mm Start-up rings 850 Center reel shaft to reel foot 980 mm - Reel structure manually rotatable by 180 with latching steps - central spread via rotary lever adjustment - mechanical disc brake, adjustable brake shoes via knurled screw Space requirement L x W x H 1000 x 850 x 1500 mm Weight 190 kg good condition; used

Istz an air conditioning / heater, functional but unfortunately the electronics is defective! Either as a spare parts dispenser or repair electronics.

The Breaker device is used to form a foil on a roll, it enables the insertion of an opening-closing tape. The machine is powered by 380V.

Manufacturer : Confitrac sprl Model: CDS-161205 Year : 2017 Type: Deodoriser Condition: new, never used. Document : CDS-P&ID-Deo-500-Electrique.pdf Installation consisting of : - A horizontal cylindrical shallow bed deodoriser divided into two horizontal compartments, supported by two supports and offering the possibility to treat either 250 kg in one compartment or 500 kg in two compartments. - A horizontal buffer tank equipped with a product inlet/outlet, vacuum outlet and sight glass. Volume: +/- 460 litres. - 2 shell and tube heat exchangers - 1 electric heater - 2 electric heating resistances - Other equipment: control and dosing valves, flow meter, steam drying ramp, etc. - Electrical cabinet Materials: all parts in contact with the product are made of stainless steel 304L and 316L. Insulation: 100 mm rock wool. Documentation and drawings available.  ...

Documents installation-drawing.pdf Technical information Physico-chemical separation / distillation unit. Year: 2015 Installation ATEX 3G IIBT4, inside the installation: zone 1G Operating mode: continuous - batch - semi-batch. Pressure: Vacuum - 3 barg max Boiler size: 50 Litres (Possible 200 Litres) Flow rates: Approximately 180 Kg/hr feeding a water/ethanol mixture (90/10) at atmospheric pressure with a reflux rate of 5. Theoretical number of trays: 20 --> Possible feeding in 3 points: 4 structured packing beds, 4 liquid redistributors (3 with recenters) Dimensions: Unit made as a skid, in hot-dip galvanised steel frame with dimensions 2400 x2400 x 4000MM high. Utilities / sources : Steam: 3 bar eff 143?C 30 to 80kg/h Cold water 25-30?C : 2-5m3/h Chilled water 5-10?C : 0.5m3/h Compressed air : 6bar eff Nitrogen inerting : 4.5 bar eff Electri ...

Previous use: distilled water Capacity: 100 L/H Material: glass Year: 1993 The unit includes : Level regulator Electrical control box Frame Pump Coil heat exchanger (1.2 bar max) Electric tank heater 5000W 200 litre glass tank Tubular exchanger (1.2 bar max) Photoelectric level Boiling chamber Stainless steel coil boiler: stainless steel 316 (1.2/1.5 bar max)

Modular unit, format processing unit, cutting unit, milling unit, profile milling unit, jointing milling unit, trimming unit, double-end profiler, edge processing machine, scoring motor, chipper motor, milling motor for edge processing machine, finishing unit, buffing unit -Manufacturer: Homag, 3 milling units and 2 buffing units from the BRANDT KS 25 edge banding machine -Buffing units: Motor KMER 0.18 kW 1360 rpm -Polishing roller: Ø 145 mm, height and depth adjustable / swiveling -Milling units: Motor Perske / Homag, see photos on nameplates -Voltage: 220 V / 200 Hz -Price / fee: complete -Dimension total. 1200/800 / H590 mm -Total weight: 243 kg

Nummerier- Perforierwerk / Imprint unit Numbering- Perforation Unit Heidelberg GTO46 Nummerier- und Perforierwerk fuer Heidelberg GTO46 Imprint unit Numbering- and Perforation Unit for Heidelberg GTO46 -Online-Video-Inspection by Skype-Video- -We would be very pleased with your visit - more machines on Stock- -Available Immediately - Can be inspect- -On Stock Emskirchen / Nuernberg - Can be test-

Nummerier- Perforierwerk / Imprint unit Numbering- Perforation Unit Heidelberg MO Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test

The rewinder / perforator is used to rewind the foil from the thimble to the thimble with the control of the foil rewinding length. It also allows you to make perforation at a certain length. Thanks to this machine, it is possible to make very long pieces of foil, used in industry or agriculture. The machine is powered by 380V.

Used dosing unit CANOL, type: P10-E -in bakery condition- 2 pieces available - Built in 1998 and 2000 - Condition: Bakery condition, ready for immediate use - Number of nozzles: 1 piece -El. Connection: 400 V, 50 Hz, 037 kW Viewing and test run are possible by arrangement.

Pipe in pipe unit for pipes up to 60mm Manufacturer: UNICOR consisting of: 1 insert unit 1 un-winder 1 up-winder Year of built: unknown

• For blister packer Uhlmann UPS 4 • 1 slide-in modul with several cards • 2 cable harnesses • Will be sold only unchecked, as is

Item: Load Sharing Unit Make: Uzushio Electric Co Ltd Type: UGS-11 Model: ULS11 No. 01K936 Source DC24V

x-travel:1000 mm y-travel:480 mm z-travel:480 mm table width:315 mm table length:1250 mm table - longitudinal motion:1000 mm :1250 x 315 mm turning speed range:28 - 1400 U/min power capacity:3,7/4,4 kW total power requirement:6 kW weight of the machine ca.:2800 kg 100 % before loading warranty: none one used knee and column milling machine-universal, make UNION Bielefeld, type USF 4, Baujahr 1970, Maschinen-Nr. 55/214

Tip height 120 mm, grinding length 1000 mm, 8 spindle speeds 55 - 600 rpm, spindle head holder MK 3, table sash. infinitely adjustable, table swivel 7 each, delivery by hand or automatically, grinding wheel-dm. max 400 mm, Grinding wheel width approx. 60 mm, tailstock holder MK 2, connection value approx. 3.5 kW, automatic working cycle, express speed 30 mm, automatic. Piercing loops. The machine is functional and does not require a geometric revision. Accessories on request!

Deutsches Markenprodukt mit 3 Jahren GARANTIE Gemeinsame Merkmale Fahrbarer Kolbenkompressor mit liegendem Behälter Serienmäßig mit allen Sicherheitsarmaturen und elektrischem Anschlusskabel mit Stecker und Condor Druckschalter Druckluftbehälter ausgestattet mit Sicherheitsventil, Behälterdruckmanometer und Kondensatablassventil Der angeschweißte Heckgriff verbessert die Verlade- und Transportfähigkeit Vollautomatischer Betrieb durch Druckschalter mit Anlaufentlastung, Motorschutz und Ein-/Ausschalter Technische Daten: - Druck 10 bar - Ansaugleistung 510 l/min - Füllleistung 390 l/min - Antriebsleistung 3,0 kW - Spannung 400 V - Drehzahl 1240 min[-1] - Beh.-Vol. 90 l - Gewicht 80 kg - Geräusch 97 dB(A) - Abmessungen (BxTxH) 1070x495x895 mm - Gewicht(incl. Verpackung) 70.0 KGM - Artikel-Nr.: A714000

UniMaster STS, die Platz sparende Lösung mit stehendem Behälter! Serienmäßig mit allen Armaturen, wie Elektromagnetventil oder Druckschalter mit Entlastungsventil für vollautomatischen Betrieb, Motorschutz, Sicherheitsventil, Manometer, Rückschlagventil, Kondenswasser-Ablasshahn und Absperrhahn Keilriemengetriebenes 2-Zylinder-Aggregat mit zweistufiger Verdichtung für 10 bar Druck erhöht die Leistung und sichert einen hohen Wirkungsgrad. Zwischen- und Nachkühler sorgen für eine rasche Abkühlung der erzeugten Druckluft Großes Ventilatorschwungrad für optimale Kühlung Technische Daten: - Druck 10 bar - Ansaugleistung 660 l/min - eff. Liefermenge 520 l/min - Antriebsleistung 4,0 kW - Drehzahl 1025 Upm. - Behältervolumen 270 l - Geräusch 78 db(A) - Abmessungen L=750, B=705, H=1800 mm - Gewicht 170 kg

UniMaster STS, the space-saving solution with a standing container! Standard with all fittings, such as an electromagnetic valve or pressure switch with relief valve for fully automatic operation, motor protection, safety valve, pressure gauge, check valve, condensation tap and shut-off valve V-cylinder driven 2-cylinder unit with two-stage compression for 10 bar pressure increases performance and ensures a high efficiency. Intermediate and aftercoolers ensure a rapid cooling of the generated compressed air Large fan flywheel for optimal cooling With refrigeration dryer and bypass line With complete module Öwadry, consisting of: refrigeration dryer, pre-filter and oil-water separator (only for DKS version) Safety tub optionally available Technical data: - Pressure 10 bar - intake capacity 660 l/min - eff. Delivery quantity 520 l/min - drive power 4.0 kW - speed 1025 rpm. - Container vol ...

Schneider Kompressor mit 3 Jahren GARANTIE bei Registrierung über uns als Fachhändler Merkmale: Fahrbarer Kolbenkompressor mit liegendem Behälter Serienmäßig mit allen Sicherheitsarmaturen und elektrischem Anschlusskabel mit Stecker und Condor Druckschalter Druckluftbehälter ausgestattet mit Sicherheitsventil, Behälterdruckmanometer und Kondensatablassventil Der angeschweißte Heckgriff verbessert die Verlade- und Transportfähigkeit Vollautomatischer Betrieb durch Druckschalter mit Anlaufentlastung, Motorschutz und Ein-/Ausschalter Technische Daten: - Druck 10 bar - Ansaugleistung 410 l/min - Füllleistung 295 l/min - Antriebsleistung 2,2 kW - Spannung 230 V - Drehzahl 1210 min[-1] - Beh.-Vol. 50 l - Gewicht 64 kg - Geräusch 96 dB(A) - Abmessungen (BxTxH) 820x410x810 mm - Gewicht (incl. Verpackung) 85.5 KGM - Artikel-Nr.: A713000

Tank internal dimensions (lxwxh) 700x550x500mm Exterior dimensions (lxwxh) 880x730x750mm Basket dimensions (lxwxh) 640x490x80mm Ultrasound peak power 8000W 40 kHz operating frequency (others available) max. capacity 175Liter Heater 6KW 400V/50 Hz Clip on lid or hinged cover possible also available rinsing baths or dripping plates.

GE UroView 2800 (urological x ray and fluoroscopy) with the following device components: Generator Jedi 00-883988 -01 _ 65 kW Tube Varian A-286 0.3/1.2 Image amplifier _ 00-884063-01 32.5 cm OEC workstation ESP Cine (trolley with double monitor) Sony Video Graphic Printer UP-960 CE Review-/double monitor (flat screen) complete and in good technical and cosmetic condition • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do ...

Battenfeld UTR 300 heating controller for control of Unilog 4000 B

Battenfeld Unilog Control 9000 B

System: Used Westfalia Separator as semi-mobile dewatering unit Manufacturer: Westfalia Model: full coat screw centrifuge Design: as a semi-mobile dewatering unit Type: UCF 646-00-35 Power: 110 kW Screw drive: 30 kW, IP54, 50 Hz -Accessories: inlet pipe for the feeding of sludge -Decanter connectors: solids discharge chute 1.4301, Central chute, including sample tap 1.4301 -Sludge feeding: rotary piston pump Börger CL520 Flow rate: 50-120 m3/h Power: 11 kW -Mud meter: ABB, COPA XE, DN 100 -Solvents - and dosing station: fully automatically to the release of liquid products Designed for a dose of: 35 kg FHM/h Make: P + P -Eccentric screw pump: to promote the use solution over the subsequent dilution station to the decanter Make: Netzsch, 2-8 m3/h Power: 1.5 kW FU: included in the control -After dilution station: to the Hrabsetzung of the root solution to power consump ...

Factory-powered LuefterMotor Umwaelzmotor for Unitherm am Lager! Immediately available! with performance; Immediately available

- Einspannmaße H=1600 mm, B=2900 mm - Einspannmaße bei Rahmen H=1600 mm, B=2600 mm für Korpusse bis 600 mm Tiefe - Rahmenpresse mit Korpuseinrichtung und zentraler Handhydraulik - Druckkraft 2,5 to / Zylinder - 4 Presseinheiten mit zentraler Handhydraulik - 1 Seitendruckeinrichtung mit 2 Zahnstangengetrieben - 4 Exzenter-Oberspanner, 4 Korpusauflagen - Gewicht ca. 450 kg

Dimensions: L 620 mm x W 330 mm x H 1520 mm Drive: 2,2 KW Speed: 18000 RPM Grinding Chamber diameter: 130 mm Width: 40 mm medium air flow rate: about 2-4 m ³/min. Capacity: from 1 to 50 kg / h-> depending on the material and desired fineness.

Gubisch Umfaelzer with 3 spindles, including olive drill, ; ready for use

Built in: 2004 Rebuilt: 2017 Equipment: stitching unit for Ferag UniDrum; working condition

x/y/z = 500/360/400 mm, max. 4000 rpm, 4 clamping corner, 1 pushbutton, various shots, cabinet Lista

Te Koop: Ultra Filtratie in 40 foot container: Type: HWUF 10060 UF/MB/10 Cap. ongeveer 45 M3 / uur. Membranes 10 pieces (2 x 5). Type IMT 10060/UF / MB capillary seven bore.

RECON - with uncooled seat rings ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

Description Brand Caselli ID 7208 Status Active Price 3.700 € + VAT Year of manufacture 2014 Location Oradea (RO) Wood drill for chair assembly Caselli manufactured in 2014 with 4 drill heads and motors. ExWorks. Price is negotiable. Contact Tel.: +40-359/175.575 Fax: +40-259/426.248 Mobil: +40-743/177.040 ; +40-740/221.698 Technical inspection can be organized at least 24 hrs before the due date We speak English. Wir sprechen Deutsch. (+40-740/221.698 ) Hablamos Español. Beszélünk magyarul. (+40-743/177.040 ) Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervam dreptul la greseli, modificari si vanzare prealabila.

No. 4293: 1 gebr. Universal tool milling machine Fabr. EPPLE, type UFM 100 Digi,. Bu. 2004 with 3-axis digital display ARB.-ber.: 620 x 250 x 440 mm, Accessories: table 1120 x 260 mm Universal milling head Other: Spinedel SK 40 Spindle speed 40 - 1600 min-1 Weight 1600 kg

Manufacturer: ASEPTO GmbH Year of construction: Fully Refurbished2021/2022; overhauled with ne controls and PLC Capacity: up to 6000 l / h (for milk desserts) with APV Gaulin Homogenizer as a high-pressure pump, capacity: 7,000 l / h Complete documentation and controls available

Table surface: 300 x 1300 mm Table movement x: 950 mm Table movement y: 220 mm Table movement z: 400 mm Spindle intake: MK 5 Spindle speeds: 25-1200 rpm Prests lengthwise & across: 7.5-635 mm/min Presens vertical: 3-250 mm/min Electr. Connection: 380 V, 7.5 kW Space requirement: 1670 x 1500 x 1750 mm Weight: 2600 kg

Bearing number 1105-02690 Machine type Milling machine - Universal Make HERMLE Type UWF 1000 Built in 1988 Control type CNC Storage location FRANCE Country of origin Germany Delivery time SOFORT Freight base EXW Technical details x-way 700 mm y-way 630 mm z-way 500 mm Control heidenhain 355 Tool holder SK 40 (DIN 69871) Table clamping area: 1000 x 490 mm Spindle speed Gear stage 1 25 - 400 rpm. Spindle speed Gear stage 2 401 - 1260 rpm Spindle speed Gear stage 3 1261 - 4200 rpm Feed 5 m/min Rapid speed 10 m/min Swivel of the milling head + / - 90 ° Pinole diameter 110 mm Pinole stroke 95 mm Total power requirement 18 kW Machine weight approx. 5 t Information with full cabin coolant device Sale takes place without clamping equipment approx. 8500h switch-on hours

with vacuum pump speed-controlled FU with double coat Panel mobile cart Temperature gauge Manual Spare parts Dimensions LWH: 1000 x 700 x 1300 mm Weight: approx. 150 kg

No.: 01-3926 H Y.O.M.: 2001 speed-controlled via FU Power: 3 kW Tool shaft with bayonet clasp, removable, new spare shaft very good condition Dimensions LWH: 1400 x 400 x 450 mm Weight: approx. 100 kg

M 1105-02800 Machine type Cylindrical Grinding Machine - Universal Make ZIERSCH & BALTRUSCH Type URS 751 Built in 1982 Control type conventional Storage location HAGUENAU Country of origin Germany Delivery time immediately Freight base from stock Technical details Grinding diameter 270 mm Grinding length 1000 mm Tip height 135 mm Total power requirement 7.5 kW Machine weight approx. 2.8 t Room requirement approx. 3 X 2.7 X 2.5 m Information ZIERSCH & BALTRUSCH Hydraulic Universal ROUND SCHLEIFMASCHINR Type URS 751 1982 built _________________________________________________ Tip height 135 mm Tip width/grinding length 1000 mm Tip width approx. 1100 mm Grinding wheel size: Through. x Width 400 x 50 mm Grinding spindle speeds (belts) 1,800 2,200 rpm Delivery path/rapid path 0.001 / 30 mm Grinding wheels delivery 0.0 ...

Stephan UM25 Universal Machine three speeds 720/1430/2880 rpm Mixed insert blunt Stainless steel boiler with double jacket Machine tiltable for removing the processed medium Machine in very good condition Video about test run and other pictures available

- 800 mm working width - Re-fluted reels - 15 kW

year: 1992 capacity: approx 300 cycles / h - with 7 heads (crates short side leading) - single lane - with Siemens S5 PLC Presently equipped for 3 x 4 = 12 x 0,7l GdB glass bottles / crate. Including 1 additional set of handling parts consisting of 6 heads for 3 x 4 = 12 bottles.

• Height: 850 - 1000 mm • max length: 2400 mm (extendable) • max. static support load: 225 kg • Dimensions (LxWxH): 1600 x 600 x 850 mm • Weight: 30 kg • Electrical connection: 230 V / 50 Hz • for crosscut saws, belt grinders, cutting saws, etc. • Installation and adjustment without tools • foldable feet for space-saving storage or transport • Quick clamping ssystems enable quick conversion, e.g. for cutting down long workpieces The list price for this work table is € 139.00 (plus VAT). (Changes and errors to technical data and prices reserved!)