parta s used for sale

Key data: 190 mm, 190 mm, 250 mm

Trotec SpeedMarker 300 – Laser Marking Machine | YOC. 2021 | Laser new 2025 For sale is a Trotec SpeedMarker 300 in very good condition. The laser source was completely renewed at the end of 2025 – the machine is technically as good as new and ready for immediate use. Technical data: - Manufacturer: Trotec Laser - Model: SpeedMarker 300 - Year of construction: 2021 - Laser source: new (renewed at the end of 2025) - Marking software: SpeedMark - Cooling: Air-cooled - Included: Extraction system Areas of application: - Marking and engraving of metals (stainless steel, aluminum, brass, etc.) - Marking of industrial parts - Serial numbers, barcodes, logos, data matrix codes

As good as new band saw stand EWD, 17° tiltable! Roller diameter 1800 mm. Absolutely as good as new, as it has only been in operation for a very short time. Year of manufacture 2010. 90 kW drive power, with adjustable belt guide. Includes hydraulic system.

used sheeter Seewer Rondo Kombi 614, overhauled, Masch.-Nr. 0617 01

Sinmag SM-200S stop machine, new, with boiler and 3 tools, 0.37 kW, 220 V, 50 Hz, year of construction 2021, weight 90 kg, serial no. VDB2102007

Includes the following tools: 9K / 10K / 11 / 12 (see photo), Format area: max. 420 mm, Bundled page: min. 100 mm, Unbound page: without limitation, Performance: 300 – 700 pieces / hour (depending on the product and the operator)

Crosscut saw for miter cuts Brand: SALVADOR Type: Superangle 600 New machine High performance crosscut saw with rotary table for miter cuts -70° / + 70°. Max. Saw blade diameter 600 mm Saw cross section at straight cut: 30 x 100 mm resp. 310 x 160 mm Saw cross section at 45°: 260 x 100 mm resp. 220 x 160 mm Saw cross section at 70°: 120 x 100 mm resp. 100 x 160 mm Rotary table guided on precision bearings Optical system with laser light barrier for detection of the wood length and Luminescence reader to detect the markings. No manual adjustments for wood thickness Powerful Windows software for easy and safe operation

CNC unit with oscillating cutter head Brand: Atemag Type: Function Line Soft Cutter Pro Max. drive speed 6.000 R.P.M Max. tool spindle speed 9.000 R.P.M. (Frequency 150Hz) Gear ratio i = 1:1,48 Torque max. 8Nm Amplitude: 4mm

PUR gluing Brand: GP Service Type: EASY PUR general description - PUR adhesive unit with integrated pre-melt container for a permanent zero joint - greatly reduced maintenance and cleaning costs due to PTFE coating of all assemblies (except glue roller) - suitable for flexible production capacities - order in synchronism adaptable to all common machine manufacturers: - Can be mounted directly on HOMAG machines - also in alternation with original glueing unit! - Stefani with adapter - Biesse with tag - others on request Application height 60 mm, higher on request Feed up to 30 m / min, higher on request low order quantities (

CONTROLS   electronic controls TECHNICAL SPECIFICATION   max. diameter of saw blade: 260 mm   cutting capacity round: 260 mm   cutting capacity square: 260 mm   mitre cutting: yes   cutting range     round: 260 mm   .. oblong: 400 mm TECHNICAL SPECIFICATION   max. cutting height: 260 mm   sawband length: 4310 mm   sawband width: 0.9 mm   cutting speed min.: 17 m/min   cutting speed max.: 90 m/min   power of band drive: 2.2 kW ELECTRICAL SPECIFICATIONS   total power consumption: 3.2 kW   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 2400 mm   space requirements -front/back-: 2100 mm   total height: 2000 mm   total weight approx.: 1220 kg Machine overhauled, cleaned, and all oils replaced! The machine is fully hydraulically equipped, with a cooling water tank and pump, and a chip container ...

Vertical panel-sizing saw Brand: Putsch Type: SVP 145 M New machine Description: The SVP 145 M is a vertical panel saw for cutting panels in vertical and horizontal direction. The frame of the saw is completely welded and has a support grid for the workpieces to be processed, consisting of aluminium strips and plastic inserts. The automatic grid displacement ensures that the saw blade does not hit the support bars during horizontal cuts. The lower workpiece supports consist of aluminium soles and plastic inserts. For the easy movement of the workpieces, the machine is equipped with retractable transport rollers. The saw beam and the saw carriage can be moved and adjusted by hand, the saw beam can be fixed in 5 vertical sawing positions for this purpose. The comfortable insertion and removal of the saw head is ensured by an ergonomically shaped handle. Standard equipment: - El ...

Panel sizing saw, vertical Brand: Putsch Type: SVP 420 M New machine Description: The SVP 420 M is a vertical panel saw practical for cutting panels vertically and horizontally. The saw frame is completely welded and has an attachment grate for the workpieces, consisting of aluminum strips and plastic inserts. The automatic grate movement ensures that the saw blade does not hit the contact strips in the case of horizontal cuts. The lower workpiece supports consist of aluminum soles and plastic supports. For simple movement of the workpieces, the machine is equipped with retractable transport rollers. The saw beam and saw carriage can be moved and adjusted by hand, the saw beam can be fixed at 5 vertical sawing positions. The comfortable entry and exit of the saw head is ensured by an ergonomically shaped handle. Standard features: - electrically driven, automatic shift gate ...

Vertical panel saw Brand: Putsch Type: SVP 950 M New machine Description: The SVP 950 M is a vertical saw for cutting panels in vertical and horizontal direction. The frame of the saw is completely welded and it has a working table for the workpieces which consists of aluminium fences with plastic inserts. To prevent a contact with the saw blade while doing horizontal cuts, the frame is equipped with an automatic moving support. The lower workpiece supports consist of aluminium and have lowerable transport rolls. The saw beam and the saw unit can be adjusted and moved manually. Therefore the saw beam can be fixed at 6 vertical sawing positions. The simple shift of the saw head is possible because of an ergocnomical formed handle. Standard equipment: - Electric driven, automatic moving support - Swivable central support for small workpieces (length approx. 4680 mm) - 4 gr ...

CONTROLS   electronic controls DIMENSIONS / WEIGHTS   space requirements -left/right-: 3600 mm   space requirements -front/back-: 1500 mm   total height: 2800 mm   total weight approx.: 2000 kg never used (NEW) ! - Perfect for high-precision cleaning of sensitive and complex components. - Ideal for optics, medical technology, precision mechanics, and micro-components. - Gentle ultrasonic fine cleaning for coated or delicate components. - Suitable for cleanrooms in applications with the highest purity standards. Manual loading of process tanks 1: Ultrasonic cleaning with heating to max. 60°C (68 l) 2: Fine rinsing process tank (68 l) with deionized water 3: Fine rinsing process tank (62 l) with deionized water Hot air dryer with heating to max. 110°C Manual emptying 5 transport baskets + 1 transport basket with rotation unit Dimensions: max. 300 mm x 250 mm x 210 mm Weight:  ...

few operating hours laboratory machine - Producer Büftering - Type SWT 325 QH - Year of construction 2015 - 1. Unit - Cross belt - Electronic sanding beam EPS - Fins belt - Sanding belt speed infinitely adjustable - 2. Unit - Length belt - Electronic sanding beam EPS - Sanding belt speed infinitely adjustable - 3. Unit - Brush sanding head Aderlohn 650mm / Messing 650mm - Operating side, left - Electric height adjustment - Feed speed infinitely adjustable - Vacuum transport belt - Air speed main collector 5500 m³/h, 20 m/s - Consumption of compressed air 80 - 108 m³/h - Weight 4.000 kg - Standort, nicht am Lager - Switch cabinet built into the machine - Total connection power 91A / 48 kW - Voltage / HZ 400/50

A surface grinding machine is offered. Horizontal grinding spindle, ball-bearing mounted, dual system, hydraulic: infinitely variable table speed, manual: handwheels for individual parts and fine adjustment, flat or V-guides. Inspection possible by appointment.

Pressure total: 250 ton Ram stroke: 70 / 250 mm Slide adjustment: 160 mm Ejector in ram: 20 ton Ejector stroke in ram: 10 mm Shut height (stroke down, adjustment up): 520 mm Free lateral opening F-B: 1.300 mm Table surface area : 1.600 x 1.600 mm Slide area: 1.600 x 1.600 mm Number of strokes: 0 - 50 s.p.m. Required power: 33 kW Height over floor approx.: 5.500 mm Weight of machine approx.: 58 ton Roll feeder Material width: 1250 mm Material thickness: 0,3 - 1,6 mm Control: Siemens S7

Turntable diameter: 1650mm, turntable height: 65mm, mast height: 2560mm, max. load capacity: 2000kg, max. pallet dimensions X/Y/Z: approx. 1200mm/1100mm/2400mm. Machine dimensions X/Y/Z: approx. 2600mm/1650mm/2600mm, weight: approx. 550kg. Documentation available. An on-site inspection is possible.

- Producer Venjakob / Superfici - Type TU166-30 + 2 UVM55 - Year of construction 1997 - Working width 1300 mm - Number of lamp from top 2 Stk. - Lamp bevel to conveyor - For mercury lamps - For gallium lamps - Electic capacity lamp 80 W/cm - Selective shiftable 80/40 W/cm - Feed speed infinitely adjustable by hand wheel ~ 2 - 7,5 m/min - Location - Voltage / HZ 400 / 50 - Commodity code 8419 3200

A mobile welding fume extraction unit Schmidt & Kranz is available. Air flow rate: approx. 1800m³/h, power: 1.5kW. An on-site inspection is possible.

- Producer Elmag Superfici - Working width 1300 mm - Number of lamp from top 2 Stk. - Lamp straight to conveyor 2 Stk. - For mercury lamps - For gallium lamps - Electic capacity lamp 80 W/cm - Selective shiftable 80 / 40 W/cm - Feed speed infinitely adjustable by hand wheel ~ 2 - 7,5 m/min - Location - Voltage / HZ 400 / 50 - Commodity code 8419 3200

- Producer Elmag Superfici - Type TU 166 - Year of construction 2001 - Working width 1300 mm - Number of lamp from top 2 Stk. - Lamp straight to conveyor 2 Stk. - For mercury lamps - For gallium lamps - Electic capacity lamp 80 W/cm - Selective shiftable - Length cross bar conveyor - Feed speed infinitely adjustable by hand wheel ~ 2 - 7,5 m/min - Voltage / HZ 400 / 50 - Commodity code 8419 3200

A glass processing plant with several production lines is available. 1) Cutting line with automatic breaking system 2) Cutting line with automatic breaking system 3) Glass scrap disposal line 4) Glass scrap disposal line 5) Double-sided glass grinding and washing machine Scheppach 2500 C4/0E with washing machine T 4516 133 6) Double-sided glass grinding and washing machine Scheppach 2500 C4/0E with washing machine T 4516 133 and portal drilling machine, max. glass dimensions: 2600x2200mm 7) Control system 8) Water supply system for washing machines with circulation water treatment, sludge dewatering, chemical supply, and additional components 9) Horizontal tempering furnace Tamglass ProE-2442-ABS-20 10) Domino D550+ 10 (55W and 10mm scanner). A large number of spare parts, complete spare robots, and numerous glass racks in various formats are also available for purchase. Complete documen ...

- Producer Elmag Superfici - Type TU 166 - Year of construction 1997 - Working width 1300 mm - Operationside right - Number of lamp from top 2 Stk. - Lamp straight to conveyor 2 Stk. - For mercury lamps - For gallium lamps - Selective shiftable - Feed speed infinitely adjustable by hand wheel ~ 2 - 7,5 m/min - Length 6.000 mm - Location - Voltage / HZ 400 / 50 - Commodity code 8419 3200

A compact Sirona laboratory scanner for the dental industry is available. Scanning method: 5-axis robotic arm, technology: digital stripe light projection with autofocus, accuracy: less than 12µm, machine dimensions X/Y/Z: approx. 480mm/740mm/460mm, weight: approx. 40kg. Accessories included. Documentation available. On-site inspection is possible.

Semi-Automatic Shrink Packer – Smipack BP600 (2020) This Smipack BP600 is in excellent condition. It is a semi-automatic shrink-wrapping system featuring a pneumatic infeed pusher, a horizontally operated pneumatic sealing bar, and a single-chamber shrink tunnel integrated into a compact monoblock design. The machine is designed for low- to medium-output consumer packaging applications using LDPE shrink film. It is suitable for a wide range of rigid and semi-rigid products, including bottles, cans, jars, carton trays, and various industrial items. The BP600 is intended for grouping and packaging products in LDPE shrink film, with optional use of pads or trays depending on specific operational requirements. Technical Characteristics Manufacturer SMI Italy Manufacturer’s model Smipack BP 600 Manufacturing year 2020 Total operating hours Approx 700 Capacity upto 600 p ...

Steam Boiler Plant 120 MW / 30 bar Saturated Steam This steam boiler plant is in good condition and designed to produce 54 kg/sec of saturated steam at 30 bar for industrial processes. The boiler features a membrane wall construction and is supported from the bottom. It is equipped with four burners located at the top of the boiler: two fired by natural gas and two by light fuel oil, each with a capacity of 30 MW. The firebox base and lower manifold are protected by refractory tiles. The flue gas side of the boiler operates under positive pressure. The plant includes two 100% capacity combustion air fans; there is no exhaust gas fan. The equipment has been meticulously maintained and upgraded throughout its operational life, meeting the most stringent modern quality standards. The steam boiler operates on natural water circulation, with heating surfaces arranged across two draughts ...

Steam Boiler CHP Power Plant with 240 MW Pyroflow CFB Boiler A combined heat and power (CHP) plant in very good condition, with an electrical capacity of 88 MVA and a thermal capacity of 240 MW. The plant is designed to operate primarily on wood-based biomass, with coal as a backup fuel. This is a complete power plant, still in full operation, and includes all technical systems from fuel feeding to the dispatch of electricity and live steam. The equipment has been exceptionally well maintained and extensively upgraded throughout its lifetime, meeting the most stringent modern quality standards. The steam boiler utilises Circulating Fluidised Bed (CFB) technology with the commercial-type PYROFLOW, manufactured in Finland by Ahlström in 1989. This CFB boiler delivers a steam flow of 100 kg/second at a pressure of 137 bar and a temperature of 535ºC. The primary fuel has been wood-ba ...

Board separator LINCK, type SEA/SE 1.

General SKU104U1454 LocationBarneveld MakeZiemann Ludwigsburg Type2500 l Pressure Working pressure5.4 Bar Vacuum possiblecheck Working pressure jacket10 Bar Main Features MaterialStainless steel Volume2500 Ltr. Motor0.75 KW Specified Features - Stainless Steel Reactor Reactorcheck Capacity2500 l Vessel sizesdia. 1400x1250 mm Dished bottomcheck Dished top sidecheck Top connections4x dia. 25 mm Outletdia. 35 mm Half coil jacketedcheck (26 l.) Max. temperature140°C. With propellor stirrermake Ekato Motor0,75 KW, 380 Volt (Ex) Stainless Steel Reactors MaterialStainless steel 1.4541 (321) Information Year of construction1986 Mounted on legscheck Floorspace1,6x1,5 m Total height3,3 m Weight800 kg ATEX compatiblecheckStainless Steel ReactorsZiemannReactors > Stainless Steel ReactorsBrand > Ziemann What you can expect from Foeth: -- Machine is in working condit ...

Key data: 2040 mm, 1 mm

used Schechtl hand-held guillotine shears, with hand back gauge, extendable from the front Sheet metal support, automatic. Hold-down Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Working length 2040 mm Blechstärke Stahl/Sheet thickness steel 1,25 mm Sheet thickness Alu 1.75 mm Blechdicke VA/Sheet thickness stainless 0.80 mm Farbe/Colour grün Machine Weight: 650 kg Dimensions/Space requirment 2442 x 756 x 1056 mm Cutting gap adjustment without Automatic hold-down Fixed cutting angle Backgauge min. 5 mm Back gauge max. 500 mm Maschinennummer/Machine number 8604

General SKU272W407 MakeTerlet Terletherm TypeT2-6M MS No.97.0908.4 Year of construction1998 LocationBarneveld Pressure Working pressure10 Bar Working pressure jacket4 Bar Main Features MaterialStainless steel Motor11 KW Surface4.4 m2 Specified Features - Scraped surface heat exchanger MaterialStainless steel 1.4401 (316) Scraped surface heat exchangercheck Heating surface4.4m² Capacity132 l. Cylinder sizesDia. 725x1350 mm Max. temperature150°C With jacketcheck Max. temperature150°C InletDN80 OutletDN80 Motor11 kW, 415 volt Speed66 rpm Information Floorspace1,3x0,9 m Total height2,5 m Weight1400 kg CEcheck Extra SpecificationsCool-/heatings medium: water, glycol or steam. Material scrapers type: PTFE Technical specs Extra informationVolume 14/18 l., allowable temperature 150°C, pressure -1/4 bar, cooling/heating medium inlet DN50, Scraped surface hea ...

Surface grinding machine manufactured in 2003. This DEGEN FS-S3060 features an X-axis travel of 600 mm and a Y-axis travel of 300 mm. It has a table size of 600 × 300 mm and a maximum load capacity of 300 kg. If you are looking to get high-quality grinding capabilities, consider the DEGEN FS-S3060 machine we have for sale. Contact us for further details.

Equipment Included - Wurster and Dietz OPTIMAT swing-stroke full gate saw, built circa 1970 - Splitting wedge - Cross conveyor - Roller conveyor - Sharpening machine - Setter - Wurster and Dietz Edge Saw FR 7, built circa 1965 Find more here - / Contact us at -

Manufacturer: Rump Model: Strahlanlagen Xedura 1500 Year of Manufacture: 2017 Type of Machine : Wire belt blasting machine Condition: good to very good Maintenance: regularly, once a year Beam hours: 1,849 Total operating hours: 2,146 (approximately 200 hours per year) Operating voltage: 400 V, 50 Hz Control voltage: 24 V DC Rated power: approximately 82 kW Find more here - / Contact us at -

A fully automatic high-speed tube circular saw Bewo is available. Round tube diameter range: 8mm-90mm, min. square profile dimensions X/Y: 10mm/10mm, max. square profile dimensions X/Y: 80mm/80mm, feed rate: 50m/min-300m/min, saw blade diameter: 350mm, max. throughput capacity: 8000pieces/h, max. simultaneous machining: 4 tubes. Documentation available. An on-site inspection is possible.

A programmable Schleuniger stripping machine for coaxial cables is available. Cable diameter step resolution: 0.01mm, max. stripping length: 30mm, max. cable diameter: 7mm, throughput: approx. 350-600/h, cable lists: 100, cable programs: 1000, machine dimensions X/Y/Z: approx. 500mm/150mm/250mm, weight: approx. 10kg. Documentation available. An on-site inspection is possible.

Used warming counter from Alto-Shaam, model HFT2-300, from 2013. This table model is the ideal solution for restaurants, snack bars, canteens and supermarkets. The Alto-Shaam HFT2-300 is completely water-free. The gentle radiant heat gently keeps the food warm. Technical data Manufacturer: Alto-Shaam Model: HFT2-300 (tabletop model) Year of construction 2013 Material: Stainless Steel Warming basin for 3x 1/1 GN containers (2 containers included) Dimensions: W 1220 mm | T 710 mm | H 860 mm Connection: 230 V Ready to plug in Easy to clean Optionally available: mirror, additional price 30,00 € plus VAT The device has been cleaned and tested. We would like to point out that with regard to the Product Safety Regulation, the product offered here is intended exclusively for commercial use. An assignment by consumers within the meaning of § 13 BGB is to be excluded. Go ...

Plasma cutting machine Microstep SPL-P 3001.15, built in 2011 Working area 1500x3000 mm, cuts steel, stainless steel and aluminum, incl. software, incl. plasma source Kjellberg HiFocus 161i with automatic gas console, pressure reducer and Extraction Donaldson Torit DCE for outdoor installation. Last major maintenance at the end of 2024 The plant has already been dismantled , loading is possible.

Year : 2001 Thermal stripping machine for cleaning parts covered with plastic, paint such as dies, nozzles, filters. The combustion chamber is heated to approximately 420 degrees. The metal parts to be cleaned are placed in a basket which is introduced into the preheated cleaning chamber. Perfect cleaning for a cycle time of 90 to 150 min. Dimensions of the cleaning chamber: diameter 220 mm and Length: 350 mm Dimensions of the basket : diameter 210 mm and length: 260 mm Dimensions (L x W x H) : 0,90m x 0,70m x 1,60m Weight : 120 kg

Excellent condition - Fully operational - Loading / Transport possible! supply: 400 Y/230 V, N, 3 phases, 50 Hz maximum operating full load current 44 A, fuse: 50 A control voltage: 24 V Dimensions: 6514 x 9963 x 4786 mm weigh:t 5500 kg

General SKU334U821 MakeKek Kemutec LocationBarneveld TypeCM 220 Main Features MaterialStainless steel Motor4 KW Width220 mm Specified Features - Sieve granulator Granulating sievecheck Conical granulating sievecheck Rotor sizesDia: 220x150mm Sieve sizesDia: 220x180 Sieve perforationDia:3mm (3x) InletDia:145mm Motor4kW, 400Volt, 1425rpm (ex) Speed1425 rpm With extra sievescheck MaterialStainless steel 1.4306 (304L) Information No.B 32844 Year of construction11-2006 Floor space1,1x0,53m Total height0,75m Weight200kg ATEX compatiblecheck Extra SpecificationsThe product bucket has a diameter of 300 mm and a height of 300 mm. Bucket volume: ±20 liters. Sieve granulatorsPowdered foodsKek KemutecSieves > Sieve granulatorsIndustries > Food & Feed > Powdered foodsBrand > Kek Kemutec What you can expect from Foeth: -- Machine is in working condition -- At a reduced pri ...

Manufacturer: Sidasa Type of Machine : ZT100+ Centrifuge System Year of Manufacture: 2017 Application: Zinc Flake Coating for Bulk Small Parts Includes: Associated Dryer CE Certified Technical Specifications - Maximum Coating Capacity: 7.5 tons per hour Find more here - / Contact us at -

Manufacturer: Fikara Type of Machine : Galvanizing Rack System Technical Specifications - Year of Manufacture: 2000 - Year of Overhaul: 2018 - System Type: CE-1 - Heating System - Heating Output: 28 kW - Heating Medium: 3 x 400V, 50 Hz - Nominal Temperature: 70 degrees C - Nominal Current: 40.5 A - Ventilation System - Air Flow Rate: 17,500 m3/h - Motor Output: 6 x 0.55 kW - Voltage: 230/400 V - Nominal Current: 5 x 1.55 A The steel structure is no longer there Find more here - / Contact us at -

Permanent magnet motor, permanent magnet motor, electric motor, Perm.Magn-Mot, Perm Magnet Motors, servo motor, permanent magnet main drive motor, direct current motor, asynchronous main drive motor, spindle motor, permanent magnet - three-phase servo motor -Manufacturer: Indramat, permanent magnet - three-phase servo motor with brake -Type: MAC 093B-O-GS-2-C/110-A-2/ -Speed speed: nmax: 4000 rpm -Shaft: Ø 24 x 50 mm -Brake: 14 Nm 24 V -Dimensions: 395/140/H200 mm -Weight: 20 kg

General SKU268N286 LocationBarneveld MakeUnimix Haagen & Rinau Mischtechnik No.300903 Pressure Working pressure2 Bar Vacuum possiblecheck Working pressure jacket4 Bar Main Features MaterialStainless steel Volume72 Ltr. Motor2.2 KW Specified Features - Stainless Steel Reactor Closed stirring vesselcheck Capacity72 l. Vessel sizesø 400 x 400 mm Dished top sidecheck With covercheck Top connectionsDN 50 OutletDN 20 With jacket7,5 l. Max. temperature151 °C With paddle stirrercheck Motor2,2 kW 400 V (Ex) Speed mixing shaft28,5 rpm Stainless Steel Reactors MaterialStainless steel 1.4552, Stainless steel 1.4301 (304) Information Year of construction1994 With switchgearcheck (as is) Floorspace1,3 x 1,2 M Total height2,2 M Weight800 KG ATEX compatiblecheck Extra SpecificationsMax fill volume 35 ltr (minimal 9 ltr)Stainless Steel ReactorsUnimix H&RReactors > St ...

Dimeco 1675/Dnbsp;straightener with CNC feed system (cybelec) - width: 500 mm - max thickness: 1,6 mm

Dimeco 1675/Dnbsp;straightener with CNC feed system (cybelec) - width: 500 mm - max thickness: 1,6 mm

Dimeco 1675/D richtmachine met CNC-aanvoersysteem (cybelec) - breedte: 500 mm - maximale dikte: 1,6 mm

Round arch moulding machine from Schlebach in very good condition with infinitely variable speed adjustment, as well as left/right rotation. you will receive a proper invoice with VAT. Net price.

Key data: 3000 mm, 1 mm

Schechtl guillotine shears 3mx1.5mm with hand depth stop in top condition, price net.