paper shredder used for sale

Overhauled machine, single-shaft shredder LINDNER JUPITER 2200 It is made for the single-stage processing of untreated municipal, industrial and commercial waste into medium-calorific substitute fuels (40 – 120 mm) – the ideal raw material for thermal utilisation in the cement plant's calciner. Lindner Jupiter 2200 Rotor equipped with flat blades. Year of construction 2015 Control cabinet with FU ABB Control panel Drive motors : ABB 2x132 kW Funnel Hydraulic Discharge belt Total weight approx. 32 t Shipping time: immediately

We offer for sale a complete set of Indutec industrial shredder model PM16/3, equipped with all its original components and accessories, ideal for intensive industrial use in the sectors of recycling, material shredding or industrial processing. ✅ General Features: Model: Indutec PM16/3 Type: Heavy Industrial Shredder, High Power Condition: Excellent condition, complete, with accessories and spare parts Total weight: Approximately 47,500 kg divided into two containers + base Composition of the set (ready to operate): First container – N° 128790 – 13,000 kg Engine: WEG 315 S/M – 150 kW – Gearbox: FLENDER B3 SV 11A – 118 kW – Pump: Neuman & Esser CCS 6-M – 0.25 kW – Neuman & Esser clocks: 1.1, 1.2, 1.3, 1.4 Separator Gasket Lubrication tank Mill flange Spare parts set: blade holder, bevel gear, pendulum shaft, body and heads, bolts Second containe ...

Specifications Cutting width: 3.8 x 40mm Productivity (80g/m²): 65-75 Power connection: 400 V / 2.2 kW Year of Make: 1993 the safety level DIN 66399: P-4 / O-3 / T-4 / F-1 / E-3

Manufacturer:Husmann Model: HL II 1622 Year of Manufacture: 2020 - Maximum RPM: 20 – 40 - Operating Voltage: 230V / 400V - Operating Pressure: 400 bar - Power: 330 kW - Permissible Total Weight: 22,000 kg - CE Certified Find more here - / Contact us at -

Qty. 1 Second-hand shredder Mfc.: METSO Denmark A/S Model: M&J Eta PreShred 4000S Built: 2013 Condition very good Working hours: 11,347 Power supply: Voltage 400 V AC, 50 Hz Main motor: 2 X 200 kW Rated current 760 A Main motor, full load current 2 x 341 Amp., PLC controller Drive principle, hydrostatic transmission with power consumption limiter. Working cutting cassette: 2 shafts Operating asynchronously Speed: 33 rpm Number of rotary knives: 2 x 12 pieces Number of lower, fixed knives 2 x 24 pieces Bearings 2 x 2 barrel

Rotor diameter: 260mm, rotor blades: 3, stator blades: 2, motor power: 7.5kW, throughput: approx. 250kg-400kg/h, machine dimensions X/Y/Z: approx. 1500mm/1000mm/1600mm, weight: approx. 1200kg. Documentation available. On-site inspection is possible.

A Gross Apparatebau GmbH shredder, which was used in the wood industry, is available. Feed opening X/Y: 600mm/800mm, hopper volume: 0.6m³, rotor diameter: 252mm, rotor length: 600mm, rotor speed: 90rpm, drive power: 18.5kW, number of knives: 14, screen perforation: 10mm-40mm, suction nozzle diameter: 160mm, machine dimensions X/Y/Z: approx. 1800mm/1200mm/1650mm, weight: approx. 1300kg, operating hours: 4578h. Documentation available. On-site inspection is possible.

Specifications Cutting width: 3.8 x 50 mm Year of Make: 1995 Power connection: 400 V/ 4 kW Price: on request Cutting speed: 354 mm/s Safety level: DIN 66399 O-2/P-3/T-3/E-2/ Cutting Type: Particle Cut Working width: 428 mm

- With hydraulic pusher - Year: 2004 - Engine: 75 hp (55 kW) - Hopper dimensions: 1118 x 1990 mm - Cutting chamber: 1200 x 370 mm -Rotor: Orbit diameter: 370 mm Cutting speed: 1500 rpm Num. blades: 26 -52 (variable depending on the material to be treated) - With 3 sets of grille: Ø20, Ø30,Ø35 mm - Spare gearbox - Extra hopper 3000 x 2200 x 1600 (height) mm

USED UNTHA SINGLE SHAFT SHREDDER, Type LR 1400, rotor width 1.400 mm., speed 30/44, 2 x 22 kw drives, constructed in 2006, connected and running, Feed opening 1.400 x 1.050 mm, Constructors description: The strong throughput capacity of the LR1400 shredder is a result of the strong drive motors and the performance-oriented machine configuration. The configuration comprising a long rotor, a large perforated screen surface and optimised cutter geometry provides the performance which you require in your plant. High performance requires reliable machine operation, which we ensure with a full range of high-quality technological components., Thanks to the rotors special mounting, dust-protected bearings, tried and trusted gear damping and special cutting tools, the wood shredder is also very low maintenance and has a long service life. The intelligent drive control shuts the shredder motor dow ...

Sturdy supporting structure in painted carbon steel, loading hopper, Shearing size 1.300x900 mm, 2 x 22 kw drives, constructed in 2024, Rotor Length 1.300mm, N.25 knives, knives thickness 50 mm, 2 hooks, Weight about 4.500kg, Shaft speed 15/17 rpm, electric cabinet, complete with CE, users manual, electric drawings, installed power - used power in work: about 60-65% : 44

SINGLE SHAFT SHREDDER, V Rotor width 1.500 mm. Rotor diameter 500 mm 16.69″ Motor power 90 kW n.82 knives 60 x 60, adjustable counter-knife, off-set rotor bearings (low maintenance), V-Rotor with knife pockets, Welded knife holders with screwed knives and covered bold heads, Offset rotor bearings ( low-maintenance / closed ), Fast hydraulic backwards incl. different settings by PLC control and anti shock valve, Shredding room unpainted, Movable screen basket (electro-hydraulically), Screen thickness 10mm, Hydrodynamic starting clutch (energy saving system for machine start), Electromechanical drive with heavy duty gearbox, Control cabinet incl. 5m cable, Electrical control system Siemens S7 PLC control, Reverse counter and transmission limit switch (safety package), Star delta starter, Universal joints for piston with ram impulse and load-related ram function, Machine frame on anti - v ...

TWIN-SHAFT HYDRAULIC SHREDDER, Customised hopper, construction in robust high thickness carbon steel, shredding surface 1.500 x 1.100 mm, 2 counter-rotating steel shafts with differentiated speed, Blades 50-75 mm, 4 teeth or bespoke, Very easy blade maintenance, welded profile connection frame, No. 2 gearboxes, Electric motors 2x37 kW (102Hp) - 400 V/50 Hz, bearings strategically positioned so as not to be affected by the processed material, the bearings are connected to a centralised lubrication point that can be connected (as an option) either to an automatic lubrication system or to a manual greasing point where the operator can intervene regularly., hydraulic control unit,, electrical control panel with PLC and machine wiring, automatic overload reversal with programmable number of reverse cycles, width: 1.500 mm. (59.06), Power: 100 Hp 75 kw

Fully functional single-shaft wood shredder - currently in operation in our factory. Including electric control system (PLC), control cabinet (Rittal/Sarell), anti-vibration foundation and enlarged hopper. Specifications Rotor working length: 1,500 mm Rotor diameter: 485 mm Engine: 55 KW Rotor speed: 100 RPM Rotor blades: 76 pieces concave / 35x35 mm 4-way rotatable cutting crowns Screen size: 60 mm (new) Weight: approx. 9,000 kg More details on request. Errors in the information excepted.

Production Year 2015, start use in end of 2015. Used for two Year. Was used with 75kW electric motor. Now it is without motor. Can be used with some diesel motor. Have spare knives. Can input up to 42cm diameter log

DUAL-SHAFT HYDRAULIC SHREDDER, Loading hopper, Sturdy supporting structure in carbon steel, shredding surface 1.300 x 960 mm ca, 2 counter-rotating steel shafts, 75 mm thick knives, 2 hooks, max speed 18 rpm, planetary gearbox, Hydraulic motor 90 kw (120Hp) 400 V/50 Hz (can be fitted with a 75 kw drive), hydraulic power unit,, 400 lt. oil tank, automatic overload reversal with programmable number of reverse cycles, control panel with electronic system to set maximum number of inversions, cooling fan, Complete with electrical drawings, user manual, CE compliance, Possible addition of loading and extraction belt with magnetic separator, width: 1.300mm, availability: 70 days ca, conditions: reconditioned, Power: 90 kw

DUAL-SHAFT HYDRAULIC SHREDDER, shredding surface 1.000 x 850 mm ca, including loading hopper, Sturdy supporting structure in carbon steel, 2 counter-rotating steel shafts, n.20 x 50mm.thick knives (or bespoke), Hydraulic motor 37 kw, 400 V/50 Hz, hydraulic power unit,, 200 lt. oil tank, control panel, automatic overload reversal with programmable number of reverse cycles, Complete with electrical drawings, user manual, CE compliance, Possible addition of loding and extraction belt with magnetic separator, width: 1.000 mm, availability: 150 days ca, conditions: reconditioned, Power: 37 kw

Manufacturer: Vecoplan Model: VAZ 1300 Year of Manufacture: 2011 Type of Machine : Shredder System Technical Details: - Year of Manufacture: 2011 - Operating Hours: 4,718 - Throughput (depending on material): - Shredding stage P-3: approx. 1,300 kg/h - Shredding stage P-4: approx. 1,000 kg/h Performance Data: - Permissible load lifting device: 600 kg - Max. lifting speed: approx. 6 m/min Shredding performance (depending on screen hole size): - With 15 mm screen: approx. 700–800 kg/h - With 20 mm screen: approx. 1,000 kg/h - With 30 mm screen: approx. 1,300 kg/h Conveyor capacity: - Scraper chain conveyor: approx. 25 m³/h - Scraper chain conveyor speed: approx. 18.8 m/min - Screw conveyor speed: approx. 4.5 m/min Condition: - Shredder is disassembled. - In photos, hopper is rotated 90° and placed loosely. - No discharge conveying system (scraper chain conveyor) included.  ...

Manufacturer: Lindner Model: Jupiter 3200 Year of Manufacture: 2008 Type of Machine : Pre Shredder Operating Hours : 54,000 h Throughput: ~60 t/h (domestic and commercial waste) Scope of Supply: - Shredder unit - Frequency converter - Control cabinet - Hydraulic unit - Recooler Find more here - / Contact us at -

Chip Receycling Plant System Arboga / Sweden

Specifications Shredder Cutting width: 6 x 40 - 53 mm Year of manufacture: 2018 Power connection: 400 V / 50 Hz the safety level P-4/O-3/T-4/E-3/F-1 wg DIN 66399 Baler Maximum pressure: 4.4 tons Year of manufacture: 2018 Channel cross-section: 500 x 500 mm Dimensions of the tailgate: 400 x 450 mm Power connection: 400 V/ 50 Hz If you have any questions, please call us: +48 696 072 985

ID3648 Willibald SR5000 year/Bauahr 2001 approx. 7150 hours/hours 18 t Shredder for wood/green waste, magnetic separator Shredder for wood/green waste, magnetic separator

SATRIND MULTIPURPOSE DUAL SHAFT SHREDDER, Including abt 1,5 Ton hopper, 1.000 x 600 mm crushing chamber, Shafts width 1.000 mt., n.30 knives, 3 hooks, 1 mt.height Supporting structure, 11,00 Kw power (15 Hp) 380 V, Possible addition of pressing unit for round or voluminous scraps., Including extraction belt, Good working conditions, installed power - used power in work: about 60-65% : 11 kW, working width: 1000, options available: pressing unit, conditions: good, type: dual shaft, multipurpose

Komptech Crambo 5200 Direct Category: Wood & Green Waste Shredder Specification: Category: Mobile Twin-Shaft Shredder Serial / reference number: 447184 Power: 328 kW/446 hp Weight: 26 000 kg Emission class: Tier 4 Final / Stage V Equipment and description: 3-axle chassis Trailer CAT® C13 Tier 4 final, Stage V Nominal speed 1,900 rpm 1 gear: max. 23 2 gear: max. 34 rpm Roller drive mechanical Roller length 2,820 mm Roller diameter 610 mm 134 Tools (sickle teeth or planer teeth) Overbelt magnet Biocutting unit possible Remote control Material: good for woody biomass green cuttings, rootstocks, bark, waste wood, etc. Central lubrication Screen baskets: 125 x 125 mm Square / possible: 80 round, square: 100 x 100, 120 x 120, 150 x 180, 250 x 250, etc... Quick-change system of screen basket Noise emission: 114 dB (A)

Holzzerkleinerer ( Holzhäckler ) maschine modell MION MOSOLE TR 2 gebrauchte maschine Maschinenbedienung im Automatik- und/oder Handbetrieb modus Arbeitsbedingungen: ausgezeichnet Im Automatikbetrieb startet der Motor in die entgegengesetzte Richtung, um den Stopfer von eventuellen Rückständen vorheriger Arbeiten zu befreien. Im Vollautomatikbetrieb stoppt der Motor nach ca. 5 Sekunden und startet erneut in die richtige Richtung für eine kontinuierliche Bearbeitung (siehe Video). Technische Daten : hydraulischer Schieber Breite Rotor mm.700 Durchmesser Rotor mm.300 Drehzahl Zerkleinerungseinheit 100 U/min Trichterinhalt 3.42 m³ Hauptmotor PS 25 Hydraulikaggregat Motorschieber PS 1 auswechselbare Messer Beschickung von oben

Komptech Crambo 5200 Direct (New) Category: Wood & Green Waste Shredder Specification: Category: Mobile Twin-Shaft Shredder Serial / reference number: 447242 Power: 328 kW/446 hp Weight: 27 300 kg Emission class: Tier 4 Final / Stage V Equipment and description: 4472423 Axle chassis Trailer CAT® C13 Tier 4 final, Stage V Nominal speed 1,900 rpm 1 gear: max. 23 2 gear: max. 34 rpm Roller drive mechanical Roller length 2,820 mm Roller diameter 610 mm 134 Tools (sickle teeth or planer teeth) Overbelt magnet Biocutting unit possible Remote control Material: good for woody biomass green cuttings, rootstocks, bark, waste wood, etc. Central lubrication Screen baskets: 125 x 125 mm Square / possible: 80 round, square: 100 x 100, 120 x 120, 150 x 180, 250 x 250, etc... Quick-change system of screen basket Noise emission: 114 dB (A)

Komptech Crambo 6200 E Direct Category: Wood & Green Waste Shredder Specification: Category: Stationary Twin-Shaft Shredder Serial/reference number: 495005 Power: 280 kW Weight: 17 200 kg Emission class: electric drive In need of repair Equipment and description: Nominal speed 1,900 rpm 1 gear: max. 23 2 gear: max. 34 rpm Roller drive mechanical Roller length 2,820 mm Roller diameter 610 mm 134 Tools (sickle teeth or planer teeth) Overbelt magnet Biocutting unit possible Remote control Material: good for woody biomass green cuttings, rootstocks, bark, waste wood, etc. Central lubrication Screen baskets: 125 x 125 mm Square / possible: 80 round, square: 100 x 100, 120 x 120, 150 x 180, 250 x 250, etc... Quick-change system of screen basket

Komptech Multistar L3 Category: Star Screen Specification: Serial / reference number: 75070 Designation: Multistar L3 Achievement: Weight: kg Emission class: Tier 4 Final / Stage V Equipment and description: Screen with 3 fractions – fine fraction (mm): 0/10... 25 Middle fraction (mm): 10... 25/60… 90; Coarse fraction (mm): > 90... 120 75 kW/A Diesel Generator Bunker volume: 7 m3 Feed height (mm): 3,450 / Feed length (mm): 3,750 Max. discharge height medium and fine fraction (mm): 3,500 / Max. discharge height coarse fraction (mm): 2,850 Weight approx. 21 tons / Transport length (mm): 11,500 / Transport width (mm): 2,250 / Transport height (mm): 4,000 Throughput depending on the type of material up to approx. 200 m3/h

Komptech Terminator 5000 SD Category: Garbage Shredders Specification: Category: Universal Waste Shredder Serial / reference number: 481148 Power: 446 hp / 328 kW Weight: 27 000 kg Emission class: Tier 4 Final / Stage V Equipment and description: Terminator 5000 S Diesel engine: CAT C13 Tier 4 Final/Stage V F-Crushing Unit Armoured rollers – new Sickle teeth Hydraulically adjustable cutting gap 0-45 mm Overbelt magnet Central lubrication Remote control

DUAL-SHAFT HYDRAULIC MULTI-PURPOSE PRIMARY SHREDDER, Loading hopper, bespoke to project and feeding system, Sturdy supporting structure in carbon steel height 2 mt from floor, with catwalk and rails, shredding surface 1.500 x 1.100 mm, 2 counter-rotating steel shafts with differentiated speed, Knives : 75 or 100 mm thick 4 hooks or bespoke, Hydraulic motor 75 kw, 400 V/50 Hz, hydraulic power unit,, electrical control panel with PLC and connection for remote assistance, automatic overload reversal with programmable number of reverse cycles, Delivery : about 4-5 months from confirmation (excluding Winter/Summer holidays), Complete with electrical drawings, User manual, CE compliance, Possible addition of loading and extraction belt with metal separator, width: 1.500 mm, Power: 75 kw

SATRIND DUAL-SHAFT HYDRAULIC SHREDDER K10/50, Loading hopper, Sturdy supporting structure in carbon steel, shredding surface 1.000 x 850 mm ca, 2 counter-rotating steel shafts, NEW Knives, Hydraulic motor 37 kw, 400 V/50 Hz, hydraulic power unit,, 200 lt. oil tank, NEW electrical control panel with PLC and connection for remote assistance, inverter, alarms,, automatic overload reversal with programmable number of reverse cycles, Complete with electrical drawings, user manual, CE compliance, Possible addition of loding and extraction belt with magnetic separator, width: 1.000 mm, availability: 70 days ca, conditions: reconditioned, type: K10/50, Power: 37 kw

VMC ECO S-1.800, Rotor length 1.800 mm, 132 kW Drive 380-400V 3Ph, 420 A 60Hz. IP55, complete with loading hopper, hydraulic ram 11 kW, hydraulic power station, control panel, good working conditions, Constructed in 11-2001, offered AS IS WHERE IS, installed power - used power in work: about 60-65% : 132 kW, availability: immediate, working width: 1.800 mm., options available: loading belt, extraction system, capacity: depending on materials and feeding rate, conditions: Very good, type: single shaft - electric

Output Capacity: 200 kg/h // Rotor Diameter: 252 mm

Manufacturer: EuRec Model: Z45E/60 Year of Manufacture: 1997 Power: 160 kW Operating Hours: 34,427 h Find more here - / Contact us at -

A single-shaft shredder Lindner is available. Power: 160kW, working width: 2525mm, rotor speed: 100rpm, knife system: Mono-Fix, hopper opening X/Y: 3200mm/2400mm, volume: 5.6m³, filling height: 2600mm. Machine dimensions X/Y/Z: approx. 4750mm/2500mm/3400mm, weight: approx. 15500kg. Documentation available. An on-site inspection is possible.

Doppstadt DW 3060 D Single-shaft pre-shredder Equipment: MTU R 1100 EUROMOT IV diesel engine, 320 KW Total weight: approx. 25,000 KG 18-channel radio remote control Rear hinge 5.5 m, hydraulically foldable Comb extension Humidification device 21 roll teeth Form C DoppLock quick-change system 20 comb teeth trapezoid Overbelt magnet Hopper Elevation Service Details The machine is in very good technical and visual condition The machine receives a brand-new planetary gearbox before delivery Warranty: The machine will be sold in the condition existing at the time of delivery. The seller assumes no liability for defects We reserve the right to sell in advance, make changes and repairs.

Manufacturer: JENZ Model: NZ 1600 Type of Machine : waste wood shredder Find more here - / Contact us at -

Mercodor shredder ZM 44 with a cutting space of 600x380 mm and 7.5 kw drive. Complete ready-to-use machine with large base.

used shredder Manufacturer: JENZ Type: AZ 660-168-EL-200kW Year of Make: 2009 Specifications: Insertion opening: approx. 4,500 (3,500 + 1,000) x 1,500 mm Drive power: 200 kW Capacity: approx. 200 m³/h Passage: approx. 660 mm Machine dimensions: approx. 11,250 x 8,000 length x width Machine weight: 18.2 t incl. frame, leak belt and overbelt magnet with bracket More information will follow. Machine will be available around February 2026.

Opening: 850 x 590mm. - Shaft distance: 215mm. - With 15KW E.motor.

Opening: 700 x 345mm. - Shaft distance: 132mm. - With 15KW E.Motor.

With overhauled rotors. Included hydraulic-unit and control panel build in container. With conveyor for outlet.

Included hydraulic-unit and control panel build in container. With conveyor for outlet.

System includes a Vecoplan shredder, a scraper chain conveyor, and a lifting-tilting device with safety guard, the system was used for recycling plastic, 1) Vecoplan shredder VIZ 1300 S, with hood-type feed hopper, base frame, discharge electrode, scraper chain conveyor, lifting-tilting device, feed length: 1250mm, feed width: 1300mm, type: electric motor with V-belt drive, rated motor power: 90kW, rated motor current: 169A, motor speed: 750/min, protection class: IP55, rotor diameter: 495mm, number of cutting crowns: 87 pcs., dimensions of cutting crowns: 40x40mm, rated rotor speed: 185/min, rotor speed range: 95-265/min, screen hole diameter: 40mm, drive side: right (standard), overall length: approx. 2850mm, overall width: 2515mm, overall height: approx. 1350mm, weight: approx. 7200kg, 2) Scraper chain conveyor, trough width: 500mm, section length: 2700mm, screw diameter: 315mm, screw ...

Manufacturer: ERDWICH Model: M600/1-400 Year of Manufacture: :2022 Condition: As new / barely used Operating Hours: 5 hours Complete machine as shown in the pictures and drawings (including control unit/switch cabinet, feed area, and access platform) Find more here - / Contact us at -

Lindner Jupiter 3200 low-speed single-shaft pre-shredder incl. hydraulic unit and control cabinet Mileage: 54,000 BH Year of Make: 2008 Machine was regularly serviced and repaired Application: Fragmentation of commercial and. industrial waste,

Manufacturer: KOMPTECH Model: Crambo 5200 Year of Manufacture: 2015 Type of Machine : slow-speed shredder Operating hours: Approx. 14,000 hours Condition: - Used, good condition consistent with operating hours - Commercially operated - Regularly serviced and maintained (checkbook service) Chassis: - Trailer / 3-axle chassis, transportable - Road approved - TÜV valid until 03/2026 Engine and drive: - 328 kW / 460 hp diesel engine - CAT engine with mechanical drive - Machine weight approx. 27 t Applications: Suitable for roots, green waste, waste wood, stem wood, organic waste Equipment and features: - Overbelt magnet - Remote control - Armored shredding rollers - Rollers in very good condition with low wear - Fixed tools - Roller speed: 22 rpm / 34 rpm - Screen baskets: 220 mm x 140 mm - Standard paint finish - Throughput up to approx. 80 t/h - 3-axle running gear - Mechani ...

Corrugated cardboard shredders (mats) Type: 55422118 Year of manufacture: 2018

A large-format single-shaft shredder Vecoplan is available. Rotor diameter: 370mm, effective rotor length: 1300mm, speed: 120rpm, knife rows: 37, knife dimensions X/Y: 40mm/40mm, feed opening X/Y: 1400mm/1300mm, hopper volume: approx. 3m³. Machine dimensions X/Y/Z: 3200mm/2400mm/1500mm, weight: approx. 5500kg. An on-site inspection is possible.

Manufacturer: Lindemann Model: Lubre 400t Year of Manufacture: 1990 Condition: good They have already done all service of the machine : - New hydraulic joystick controls for machine operation - New hydraulic oil - New hydraulic hoses and pipes - Hydraulic cylinders for rams - New cutting knives - Remote control for machine movements - New metal electrical enclosures - Find more here - / Contact us at -