paper plant used for sale

Y.O.M.: 1991 No.: 4745 2 hoppers, 1x with double jacket Scraper agitator speed-controlled Homogenizer speed-controlled Double jacket pressure-resistant Temperature controller, vacuum Condition: very good Dimensions LWH: 1100 x 600 x 950 mm Weight: approx. 300 kg

Dairy Mschinery UK now offers new Glass Bottle Fillers for Milk and Juice. We offer machines for Hot fill and Cold Fill. Our bottle capacities are between 1000 - 7000 bottles per hour. Manufacture : Dairy Machinery UK Volume : 500ml - 1000ml Capacity : Option on order between 1000- 7000 bph Capping : 38mm magnetic capping chucks Filling Nozzles : Gravity Filling on Rubbers Lift and Fill or Gravity Filling Drop and Fill Cap : Aluminium Screw Cap CIP : Available Controls : Control panel Standards 2019 Certified : EC certificates Installation : We install all our machines at the clients facilities. Warranty : 12 months Spare Parts : spares@dairymachineryuk.co.uk

Y.O.M.: 1999 No.: 900/1 Scraper and Homo speed-controlled Vertical stroke, double jacket, swivel Temperature gauge, Vacuum, Ystral-Turrax Temperature control device GWK Type teco CS 90 Y.O.M.: 2002 Heating capacity: 9 kW Cooling capacity 23 kW, temperature maximum 95°C Dimensions LWH: 1200 x 800 x 1000 mm Weight: approx. 100 kg

Conveyor belt / climbing belt (inchGiraffeinch), built in 2013, in a very good used and functional condition. All metal parts made of stainless steel. Plastic conveyor belt, 45 cm wide, with takers. Rise height 210 cm. Machine is rollable. Speed infinitely adjustable. Connection values 400 volts, 0.55 kW. Workshop-tested, ready for immediate use. More on request.

Scraper and homogenizer (Ystral) speed-controlled Vertical stroke, double jacket swiveling with heating and vacuum pump on a mobile cart switchgear, timers, etc. Condition very good Dimensions LWH: 700 x 600 x 1900 mm Weight: approx. 150 kg

Fat baking device Berlinerbackstation Esback -Built in 2009

Reimelt fat baking plant 8 in rows with jam syringe, with exhaust air hood incl. extinguishing function. -Power consumption 80 kW -Nominal current approx. 116 A -Fuse 160 A -Protection class IP54 -Control voltage 230 VAC 24VDC -Three-phase current 400 V 3N 50Hz

Compounding system with underwater granulation. Material: PE, PP, PS, ABS (+ fillers) // Details: DC motor, DC rotor, segmented screws (2x x 70 mm / 40D) and cylinders, degassing, vacuum pump, stuffing unit, backwash screen changer GNEUSS RSF 150, underwater granulation GALA with cutting rotor, water circulation system, heat exchanger, centrifugal dryer. Controls: SIEMENS S7 with screen visualization. Available at an additional cost: Sidefeeder, 4-fold gravimetric dosing system. (Ref. No. G27615.2)

CoEx plate system net. 1350x1-10 mm Material: PE, PS, HIPS, ABS / Details: Main extruder RH EH2400-1-150-33V, co-extruder RH 121-1-50-30V, vacuum pump, CoEx-block, double hydr. Sieve changer with hydr. Station, wide-slit nozzle 1,450 mm, 3-roller smoothing unit RH GK-1600-60-G1 1,640 x 600 mm, Kelvi Plast temperature control unit, cooling section, side strip trim with knife beam, rubber roller extractor RH AT160-20, guillotine RAS 83.20, vacuum conveyor, CoEx dryer material, stacking device. (Ref-No. T27614)

Compounding plant Material: PE, PP, PS, WPC + fillers / Details: segmented screws and cylinders, three-phase motor 250 kW, dcrunner, screw speed: 300 rpm, degassing, 2x busch vacuum pump, side feeding Berstorff ZSFE 120 SO, metal separator, noise protection hood, ECON air granulating system ELG 3000, control: SIEMENS S7 with visualization. Up for a surcharge: extension to 40D possible

Compounding plant for fiberglass contaminant PE/PP Snail/LD 70/38 Material: PE, PP // Extruder with high-wear process unit (HIP), segmented screws and cylinders of 70 mm / 40D, AC-motor 260 kW,, degassing, continuous rotor, vacuum pump, pressure transducer, 4-fold dosing, 3+1-fold gravimetric dosing, side-dose PSF 46, strand head, water bath, strand granulator, temperature control unit, water cooler, material conveyer, Siemens S7 central control with visualization

WASHING INSTALLATION 90° One washer to washing system to clean the containers. The containers are tilted 90 degrees and transported through a washing device. The washing device consists of a housing that contains a spray device which is suitable for cold water with a pressure of 5bar. A conveyor belt to transport the containers. After washing, the containers are tilted back to horizontal position. No recycling water included. The concrete floor must be prepared to drain the water to a certain drain pit. The best option is lower the concrete floor in the area of the washer. OVERHEAD DE/STACKER For the PLC controlled movement, stacking and destacking of empty, containers with a maximum weight of 100 kg an overhead stacker/destacker is installed. The stacker/destacker can PLC controlled take up from:
-a-        The destacking position on the buffer (this is also the  ...

Film recycling and granulation plant Material: PE, PP, // Cascade extruder, snail/LD x 220+150/ x 26D, drives 232 & 99 kW, water separator, hot tee with underwater cooling, only 8,500 operating hours

A steam-powered freeze drying plant HOF with 1.8 m2 usable space. With stainless steel chamber door, ice capacitor, set of actuators (6 pcs.) sep. Panel.

Material: PE, PP, PS // DC motor: 132 kW, power: approx. 300 - 500 KG/hr, screw 90mm, L/D30, strand nozzle, water bath, strand granulator.

Laboratory pelletization plant PE, PP, PS, ABS, degassing, engine: 20 kW, concoder, screw diameter 35 mm, L/D, degassing, pressure transducer, vibrating dosing, strand nozzle, water bath, strand granulator. Power: approx. 60 - 80 KG/hr

Material: PS, PE, PP, PA, // Details: DC motor 145 kW, screw revolutions: up to 600rpm, screw diameter 70 mm, L/D 32, segmented screws and cylinders, degassing (optional vacuum pump), control: Siemens S7 with visualization. incl. strand nozzle with water bath and strand granulator, motor up to 265kW possible. For extra charge: underwater granulation, or water ring granulation

Material: PE, PP, PS, ABS, / Details: double screw, runner, segmented screws + cylinder, hydraulic. Cassette sieve changer, strand nozzle, 6m water bath, strand granulator, additive dosing. 3-fold degassing (vacuum pump vs. extra charge), For an additional price: dosing system, water ring or underwater granulation.

Material: PE, PP, PS, ABS // Details: Screw diameter 2x 50 mm, L/D 32, DC motor 52 kW, Runner, segmented screws and cylinders, degassing, vacuum pump, screw speed: 400 rpm, strand nozzle, water bath, strand granulator. Power: approx. 150 - 250 KG/hr.

Material: PE, PP, PS, ABS + talc, fibers / Details: twin-screw extruder PLAMA ZSP 70, segmented screws and cylinders, DC motor 260 kW, degassing, vacuum pump, side feed, low temperature control unit SINGLE, 4+1 gravimetric dosing BRABENDER incl. working platform, screen changer GNEUSS RSF 150, start-up crossover, underwater granulation GALA MAP6 with cutting rotor, water system, heat exchanger, centrifugal dryer. Controls: SIEMENS S7 with screen visualization SIEMENS Multi Panel 270B Touch. Power: approx. 600 - 800 KG/hr

Material: PE, PP, PS, ABS / Details: three-phase motor 215 kW, segmented screws and cylinders, continuous rotors, screw diameter 50 mm, L/D 40, power: approx. 400 - 800 KG/hr, degassing, SIHI vacuum pump, gravimetric belt scale K-Tron WF 300 with stubble, strand nozzle, continuous cooling belt, cooling tank, squid granulator Scheer SGS 100, moisture measuring unit, control unit Siemens S7 with visualization.

used wood carburetor Plant Bj 99 with control cabinets and Perkins gas engine, Generator Stamford 670 kVA Plant was only in operation for 6 months also associated wood chip drying plant available

Compounding system with GALA underwater granulation Material: PE, PP, PS, ABS // Details: segmented screws and cylinders, screw diameter 2x 40 mm, L/D 44, DC rotor, DC motor 104 kW with gearbox, worm speed: max. 1,200 rpm, 2-fold degassing, ground pressure transducer, start-up valve, water box, Gala A1PAC6 underwater granulation with water circulation system and centrifugal dryer, temperature control unit SINGLE STW 150/1-6-100-NS/E, 6-fachimetric dosing incl. control. Control: Macromatex. Power: approx. 200 - 400 KG/hr

Grease baking device Jufeba TK-2000 -Fat baking device Jufeba -Type: TK 2000 -20 kW -Outside mass: 198x91cm -Basin inside mass: 194x87cm

Grease baking device Roka plant Tippfix Model DA 900 -14.4 kW -Outside mass: 80x204cm -Basin indoor mass: 70x194cm

Residual item material from inventory sale for solar free-surface plant Screws, nuts, cable clips, washers, mid and end terminal profiles Package price

Complete Particleboard Plant Don't hesitate to keep in touch with us for further information.

Bread-long wrapper Sw&P BM 51-5 -Length 326cm -Bandwidth 60cm -400 volts -Roll width: 32cm

Ribbon swirlWerner & Pfleiderer -Band length 210cm -400 volts -with flour spreader

Bread-long wrapper S&P ELR -Bandwidth 88cm -400 volts -mobile on wheels -with 2 boards of act

Bread-long-wire Kemper IL Special / 620cm Long -Bread long-making machine from Kemper -Type IL- Special -Machine length approx. 620 cm -with 3 pieces flour spreader -400 volts

16 x 3.2MW 60Hz KAWASAKI Gas Turbine Power Plant Main specifications - Gas Turbine Model: M1T-23 x 16 sets - Maker: KAWASAKI - Power Output: 3,200kWe - Frequency & Voltage: 60Hz & 6600V - Year of Production: 2008 - Running Hours: about 60 hours - Fuel Oil: Natural Gas - Plant Auxiliary Equipment: 1 set This gas turbine plant has 16 x 3.3MW gas turbines with the optimal layout of 4 x 4 blocks and was initially installed as an emergency power supply in preparation for major disasters or large-scale power outages in the area. Fortunately, as there has been no serious emergency, this plant has had almost no operation, and the total running hours does not exceed 60 hours for each unit until today. However, as the plant has been regularly checked and well maintained, now the gas turbines units are in the best condition. This power plant is scheduled to be shut down in  ...

Packaging plant Technical data • Conveyor belts: 4 • Conveyor belts Length (mm): 2570 • Conveyor belts width (mm): 900 • Ewnopack WSU 2200 cutting machine: built in 1995 • Cutting machine cutting length (mm): 1400 • Strapping device Signode HB 4300: built in 2002 • Strap Signode HB 4300 for: 9 / 10.5 mm plastic tape • Pass-through size strapping device max. (mm): width = 800; Height = 780 • Components all: fully automatic chained

KHS Seitz Champagne Filler 18 000 b/h Natural cork, 63 fillers

5.5MW 60Hz KAWASAKI PUC60 ECOPLUS Gas Turbine Power Plant This is an eco-plus gas turbine power plant that has been being operated successfully for over 160,000 hours since it was manufactured in 2002 and installed. This plant has been regularly inspected and very well maintained according to the maintenance manual by the operating company. Now, the plant is scheduled to go for sale after stopping its commercial operation around June 2023. Main specification: - Gas Turbine Model: KAWASAKI PUC60 ECOPLUS - Maker: KAWASAKI - Power Output: 5,570kW - Frequency & Voltage: 60Hz & 3300V - Year of production: 2002 - Running Hours: 163,858 hours - Fuel Oil: Natural Gas - Plant Auxiliary Equipment: 1 set

3 x 2.5 MW complete HFO power plant , MAN ( SSANGYONG ) 12V8/32H coupled with AVK generator 3.3KV / 50 Hz , Year : 1997-2000 Running hours : 34,000~44,700 hrs

GAI vacuum filler + 1 screwdriver head Capacity: 18,000 b / h - 20 ml, 12 fillers

750 MW each, UNUSED Gas Based Complete Combined Cycle Power Plants 2 units available Technical Specifications: The Project Details: 1. EACH module has two Gas turbines GE 9FA.03 (DLN2+) and one Steam turbine GE D11. Each GT exhaust is directed to the triple pressure unfired, natural circulation horizontal, type CMI USA HRSG. This configuration helps turndown operation of station up to 45%. 2. The Station is based on robust design of GE Gas Turbine with high efficiency DLN2+ Dry low Nox system, each GT is site rated for an output of 235 MW and the triple pressure reheat GE D11 Steam Turbine with downstream Exhaust, is site rated at 266 MW. The HRSG is a Triple pressure, Natural circulation, Horizontal design type with Deaerator atop the LP drum. Thus Net Combined cycle efficiency at Site condition is approx 57% on LHV basis. The inherent design of the gas turbine reduced the N ...

Many thanks for your interest in our machinery, please find below our offer: Manufacturer : Barth Type : NR 3000 batch roaster Year of made : 2000 Output /h approx. : between 800-1250 kg Nuts Consisting off : Plant components: - Hopper for nut roasting machine NR 3000 (650kg whole nuts), with scale - Nut roasting machine NR 3000 batch size 400-620kg/batch, roasting time 20-40min) - Roasted air conditioning - HWP cooling system - Cooling air supply - increased stand frame - aspiration device stand frame - aspiration device cooling zone - thermal exhaust gas cleaning system TNV 8000 (8000m³/h, residual content in the clean gas 50mg/C/m³) - Exhaust pipe TNV - free-standing 2-way steel chimney system (height 21500mm, outside diameter 1450mm, 2 pcs. Stainless steel inner pipes 500mm) with thermal insulation - Fully automatic control unit As well as all pipes, p ...

Can sealer Manufacturer: Ferrum Type: F 160 Built: 1992 Refurbished: Capacity: 3900-9600 doses/h infinitely adjustable Lid: 73 diameter Canned height: 50 - 190 mm

The extrusion line was designed for cast film production. Processing of thermo plastics in a temperature range of 150-300°C. POSSIBLE LAYER STRUCTURES: - mono film
 - 3- layer (A-B+C-A) - 5- layer (A-B-C-B-A) DATA OF FACILITY Total output of extruders max. 2230 kg/h Extruder A: 90/33 L/D max. 330 kg/h Extruder B.: 135/33 L/D max. 950 kg/h Extruder C.: 135/33 L/D max. 950 kg/h Film width range (net): 1600 - 2110 mm Two rolls cutting possible (2x 800 – 2x 1055mm) Thickness range: 25-580μm Production speed: 10 - 150m/min Roll width: 2500 mm Max. roll weight: 2000kg ADDITIONAL COMPONENTS (QUALITY): Non-contact thickness equipment for automatic TD profile measurement with double side corona treatment (max. 12000W) Optical inspection system, including marker system if failures are detected, incident and transmitted light system  ...

7.2MW diesel power plant. This vintage power plant has been used as an emergency generating sets for a larger R&D center in Korea, a very short actual running hours (abt. 2000~3000hrs) and has been well maintained, so our company can confidently recommend this power plant to anyone who needs it. The plant was dismantled and has been now stored in our factory and will be delivered to the buyer after the performance verification test of the generating sets at our test shop. Main Specifications - Engine Model: SSANGYONG-MAN 18V28/32H x 2 Sets - Manufactured & Running Hours: in 1999 & abt. 2000~3000hrs - Continuous Output: 3600kW x 720 rpm - Frequency & Voltage: 60Hz & 6600V - Fuel Oil: Diesel Oil / Heavy Fuel Oil - Plant Auxiliary Equipment: 1 set

Designed for COEX- castfoil production with additional coating unit. The extrusion part of the line has 2 extruders; the coating unit has 1 extruder. Processing of thermo plastics in a temperature range of 90-300°C. Different combinations of production are possible: - main unit (CoEx) with coating 
 - main extruder (CoEx) without coating 
 - coating processing over winding unit on an existing base film 
 For production in the different described combinations you can lock the not necessary equipment parts. 
 POSSIBLE LAYER STRUCTURES: Main extruder: - Mono film if necessary with tensilized film 
 - 3- layer film (A-B-A) if necessary with tensilized film 
Coating unit: 
 - mono film on excisting base film if necessary with second tensilized film Unwind diameter: max. 1.000 mm Allowed roll/bobbin weight: max1.500kg MAIN EXTRUSION UNIT To ...

CAST FILM EXTRUSION LINE SML winding unit This production line was professionally dismantled in 2017 Designed for COEX- cast foil production. Processing of thermo plastics in a temperature range of 150-300°C. The system can be operated with the following combinations: - Main unit (CoEx system) from Kuhne POSSIBLE LAYER STRUCTURES: - monofilm - 3-layer film (A-B-A) MAIN EXTRUSION SYSTEM FROM KUHNE Total system output max. 900 kg / h Main extruder: 105/33 L / D max. 650kg / h Extruder CO .: 90/33 L / D max. 250kg / h Foil width NET: 800-1400 mm Thickness: 25-530 µm Production speed 8-150m/min Roller width: 1600 mm Max. Roll weight: 2000 kg Version with Airnife and vacuum box One gravimetric dosing device with 3 stations per extruder Each extruder is equipped with a melt pump and a 2-piston screen changer ADDITIONAL COMPONENTS (QUALITY): Non-cont ...

Pressure filler SEITZ TIRAX SF12 For normal and sterile filling of still and carbonated liquids at a filling pressure of up to 5 bar and for hot filling. Operating pressure: 5 bar 12 digits infinitely adjustable Capacity approx: 300 to max. 800 bottles/h Dimensions and weight: H x W x D: 2400 x 940 x 1120 mm Weight: 615 kg Operating instructions and spare parts list available!

Ceetec's new A250 paint machine is here! As an official and exclusive sales partner for the German-speaking region, I am pleased to present our latest model to you. After almost 50 years of construction of the previous model since the beginning of the 1970s (better known as the GORI brush machine), the new model is now an extensive update with extended applications. Who is this machine suitable for? - Carpentry /carpentry that manufactures carports, facades, terraces, garden houses, etc. - Wood industry companies that paint, read or impregnate industrial boards / beams / slabs etc. Technical data: max. workpiece height: 250mm max. workpiece width: 250mm (or 380mm = Ceetec A380) Speed: 16-42m/min Connection: 400V / 1.5kw Benefits ggü. simple spray painting: 1. The wood protection is massaged evenly into all pores, which ensures a high resistance. 2. Different su ...

As the exclusive sales partner of Ceetec A/S for the German-speaking region, I am pleased to introduce you to our P40 coating machines. The operating principle is very simple: In the front area, the workpiece is flooded all around with lacquer material (lacquer/glaze/impregnation/oil) and in the rear area 3 counter-running brushes pull off the excess material and massage it into the pores at the same time, so that the wood protection is optimally applied. A feed pulls the workpiece (length from 800mm) through the machine at 25m/min. For an extra charge, we offer you a suitable roller conveyor set. They can be firmly connected to the machine. In the outlet, disc rollers are used, which leave only barely visible traces on the back (the paint material used arrives). To make the purchase of your new brush machine a complete success for you, we offer the following services: � ...

Flocculate plant powder and liquid 2 m3 in very good condition.

Bread round and long-wred machine Kemper Superba used Kemper bread round-wire and bread-long-wifting machine for sale immediately in stock. -Band round wire 270cm long -with Kemper SUL

Bread Sheaping Line