paper guillotine used for sale

Key data: 3200 mm, 2 mm

Motorized guillotine shears, can be operated from the front with manual depth stop 750 mm, with digital display Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Working length: 3200 mm Sheet thickness steel: 2.0 mm Sheet thickness aluminium: 2.5 mm Sheet thickness front: 1.5 mm Farbe/Colour weiß/blau Total power requirement: 32 A Machine weight: 2220 kg Dimensions: 3700 x 2500 x 1600 mm without cutting gap adjustment Connected voltage: 3 x 400 V/50 hz Connected load :5.0 kVA Projection: 750 mm Min. back gauge: 750 mm Machine number: 2300840

LVD MVS 6200 x 6,35 mm Cutting length: 6200 mm Max sheet thickness st 45: 6,35 mm Passage between uprights: 6400 mm Depth of throat: 60 mm Strokes/min: 10 > 465 str/min Adjustable cutting device: 0,05 > 0,7 Adjustable cuttingedge: 0,5 > 2,0° Electric motor (power): 11 kW Weight: 17,5 ton

sheet width: 3000 mm plate thickness: 8,00 mm distance between columns: mm total power requirement: kW weight of the machine ca.: 6,80 t dimensions of the machine ca.: m Motorized backgauge with fine adjustment via handwheel up to 1000 mm Cutting length limiter Sharpened blades The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 1020 mm, 2 mm

with angle stop, manually adjustable, with scales Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Working length: 1020 mm Sheet thickness steel: 2.0 mm Colour: grey Machine weight: 350 kg Dimensions: 1900 x 1150 x 1300 mm Hold-down manual Back gauge max. 500 mm Machine number 020607/010

Key data: 2500 mm, 1 mm

Schechtl guillotine shears 2500mmx1.25mm in good condition with new knife and hand depth stop and foot switch. You will receive an invoice with VAT and net price. Shipping available worldwide. for questions Watsapp 0049(0)1607838365

Guillotine Shears WEIKA 3200x10mm -Exhibition Machine / Unused -Cutting length 3200mm -Max. cutting thickness - steel 10mm Hjbkn Auowatxgj S Tjl - Max. cutting thickness - stainless steel 6mm -Max. cutting thickness - aluminum 12mm -Electric digital backgauge -Footswitch -Light barrier / Right -Left -Front support with ball rollers -Drive power 11KW Dimensions: LxWxH 4x2x1.9 meters / Weight 8000Kg

Key data: 1020 mm

Hand-held guillotine shears with adjustable stop (70 - 500 mm), scissors stand on a steel frame, Machine is sold in existing condition, without functional control, i.e. the machine will not be overtaken by us Working length: 1020 mm Sheet thickness steel: 0.75 mm Sheet thickness aluminium: 1.50 mm Colour: grey Machine weight: 150 kg Dimensions: 1700 x 550 x 1400 mm Hold-down manual

Code: 0319 Brand: ITALPRESSE Model: IT/310 - CE Standard Automatic veneer guillotine - CE Standard Automatic working cycle Hydraulic presser movement Motorised blade movement Robust front and rear steel supports Cutting length mm 3100 Cutting height mm 45 Rear register with electric movement Cutting display light Motor power Hp 5,5 Safety photocells Overall dimensions of assembled machine: mm 4100 x 1600 x 1500 h Weight kg 2200

Veneer splicing machine manufactured in 2007. This KUPER FLI model is designed for precision veneer splicing. It operates at a voltage of 400 V and a rated current of 14.5 A. If you are looking to get high-quality veneer processing capabilities, consider the KUPER FLI Veneer splicing machine we have for sale. Contact us for further details.

plate thickness: 16 mm cutting length: 4075 mm weight: 23 t output: 45 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

met plaatsteunsysteem Cutting length: 4100 mm Max sheet thickness st 45: 6 mm Strokes/min: 11 > 24 str/min Backgauge: electric - 1000 mm Adjustable cuttingedge: 0,5 > 2,5° Electric motor (power): 20 HP Length: 4500 mm Depth: 1942 mm Height: 2050 mm Weight: 8,3 ton Number of sheet holders: 23x

cutting length: 2000 mm sheet thickness - max.: 6 mm operating pressure: 250 bar fabric-no.: S2669 weight of the machine ca.: 4,7 t working width: 2059 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Max. cutting length: 1040 mm Max. sheet thickness: 4 mm steel Manual backgauge up to 550 mm Side stop and table extensions Knife sharpened 1700 kg

Working width: 4040mm, max. sheet thickness steel/stainless steel: 5mm/3mm, back gauge: 1000mm, weight: approx. 7000kg, control system: Elgo, working hours: approx. 22051h. An on-site inspection is possible.

Size: 780 mm Equipments: Stacking lift L-600-W-3 seriel no. (6372235)

Key data: 2540 mm, 1 mm

Pull-out sheet metal support at the front, sheet metal slide placed at the front under the machine, hand back gauge, automatic hold-down device, dimensional grooves in the table Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Sheet width: 2540 mm Sheet thickness steel: 1.0 mm Sheet thickness aluminium: 1.5 mm Colour: blue Machine weight: 500 kg Dimensions: 2800 x 1500 x 1400 mm Cutting gap adjustment fixed Automatic hold-down Fixed cutting angle Back gauge: 650 mm Machine Number: 6.1-5005

Guillotine shears Manufacturer: BBM Type: TS-H25-16 Year of Make: 2001 Tool length: 2,550 mm Tool height: 80 mm Max. cutting thickness: 16 mm Max. cutting length: 2,530 mm Max. stroke rate: 15 1/min. Voltage: 400 V Frequency: 50 Hz Control circuit: 230 V Current consumption: 58 A Line fuse: 63 A Hydr. Connection data: 300 bar Pneum. Connection data: 6 bar Weight approx. : 11 to.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 59600 € : 1126.44 € : 3100 mm : 10 mm : 6 mm : 50 mm : 13 1/min : 1.5 ° : 16 : 22 to : 1000 mm : 200 mm/s : 22 kW : 200 l : 2 Stk. : 865 mm : 580 mm : 3515 mm : 4200 mm : 2250 mm : 3600 mm : 2100 mm : 9300 kg Swing cut construction NC-preselection system D-touch 7 with touch screen for back gauge, cutting length, quantity, USB port Motorized back gauge 1000 mm on ball screws, folding upwards Clear control panel mounted on moveablearm Hydraulic hold down pistons are arrangedclose to the cutting edge Foot switch Central, manual blade gap adjustment Cutting line illumination Broad table with balls Piece counter Single and continous stoke Fold up finger guard 1.000 mm 1 squaring arm 1. 500 mm with scale,T-slot and tilting cam 2 supporting arms 1.000 mm with T-slot Simple replacement and grinding of theblades Variable adjustable cuttinglength ...

Table shear cutting knife, replacement knife for table shear, replacement cutting, cutting knife, shear knife -Spare knife: for guillotine shears, from stock for guillotine shears Fischer DHS 12/3000 -Quantity: 4 pieces available -Lengths: 2x 2650/100/25 mm / 2x 450/100/25 mm -Hole spacing: 200/250 mm, see photos -Accessories: incl. Box with fastening screws -Price: complete -Weight: 126 kg

Hand guillotine shears, guillotine shears, sheet metal shears, sheet metal shears, folding machine, edging bench -Hand guillotine shears combined with: folding machine -Cutting width: 610 mm -Max. Section thickness: 1.0 mm -Swivel bending machine -Max. Working width: 610 mm -Max. Sheet thickness: 1.0 mm -Transport dimensions: 845/910/H1230 mm -Weight: 240 kg

guillotine shears, sheet metal shears, metal sheet shears, crank guillotine shears -mechanical guillotine shears -Cutting width: 2040 mm -max. cutting thickness: 2.0 mm -Equipment: back stop, side stop, 3 supports -Drive: 5.5 kW -Installation dimensions: 2650/1900/H1070 mm -Transport dimensions: 2650/730/H1070 mm -Weight: 1378 kg

Replacement knife for table shears, replacement blades, cutting knives, shear knives -Number: 2x knives available -Angle honed: 90° -Dimensions: 20 x 80 mm -Lengths: 2x 2397 mm -Hole spacing from: 73/125/200/200/200/200/200/200/200/200/200/200/200/125/73 mm -Threaded hole -Price: complete -Weight: 56 kg

Guillotine scissors, guillotine shears, tin snips, tin guillotine shears, crank guillotine shears, lever shears, lever guillotine shears, hand guillotine -guillotine scissors: hand guillotine cutting width: 1060 mm -Type: unfortunately without type designation/cutting data -Cutting width: 1070 mm -Max. Section thickness: mm -Stop depth: 435 mm -Total dimensions: 1760/890/H900 mm -Weight: approx. 161 kg

Guillotine scissors, guillotine shears, tin snips, tin guillotine shears, crank guillotine shears, lever shears, lever guillotine shears, hand guillotine shears -Guillotine scissors: hand guillotine scissors, solid design -Cutting width: 1030 mm -Max. Section thickness: approx. 2.0 mm -Fence depth: 550 mm, fence with removable rail -Dimension: 2250/870/H1295 mm -Transport dimension: 1670/870/H1110 mm -Weight: 414 kg

guillotine scissors cutting blades, replacement blades for guillotine scissors, replacement blades, cutting blades, scissor blades -Cutting knife. Replacement blades for table shears, 2 pieces -Cutting length: 2550 mm -Hole spacing: 125/200 mm / Ø10 mm see photos -Price/tax: complete -Total weight: 40 kg

Stop for press brake, bending machine, guillotine shears ..., clamping angle, clamping aid,.Support rail for press brake, bending machine, guillotine shears, stop rail, clamping rail -Manufacturer: RAS, support rails from guillotine shears type RAS 53.60 -Dimensions: 805/100/H80 mm / groove width 16 mm 3 pieces -Dimensions: 720/75/H85 mm with stop rail 1 piece -Delivery/Price: complete -Transport dimensions: 805/350/H80 mm -Weight 34.8 kg

Plate shears cutting blades, replacement blades for plate shears, replacement cutting edges, cutting blades, shear blades -Cutting blades. Replacement blades for Atlantic ATS 3006 guillotine shears, 2 pieces -Cutting length: 3120 mm -Hole spacing: 195 mm / M14 see photos -Dimensions: 49/19/3120 mm / 49/19.4/3120 mm -Price/Delivery: complete -Transport dimensions: 3200/120/H190 mm -Total weight: 57 kg

: neu : ca. 12 - 14 Wochen ab Auf : Türkei : 193000 € : 3647.7 € : 6080 mm : 13 mm : 10 mm : 350 mm : 10 1/min : 0.5 - 2.5 ° : 29 : 58 to : 1000 mm : 200 mm/s : 37 kW : 400 l : 6 Stk. : 950 mm : 650 mm : 6375 mm : 7400 mm : 2200 mm : 3700 mm : 2900 mm : 33820 kg linear guided CNC touch screen D-touch 7back gauge,cutting angle,cutting gap,cutting length, quantity USB port cutting line illumination foldable ball screws for back gauge balls in table foldable finger protection, 1.000 mm side lay with T-slot, tilting cam and scale 6 support arms wit T-slots oilfilling light barrier on the back of the machine user manual in GERMAN and ENGLISH PRICE FCA TURKEY (sample photo) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Max. cutting length: 2040 mm Max. sheet thickness: 2 mm steel Manual backgauge up to 500 mm Side stop and table extensions Knife sharpened 1900 kg

LAFFET 90L32 – Iron Cutting Guillotine General data: Manufacturer: Laffet Model: 90L32 Machine type: Iron cutting guillotine Power supply: 380 V / 50 Hz Motor power: 3 HP Weight: approx. 120 kg Dimensions (L x W x H): approx. 1000 x 400 x 600 mm Condition: Untested Description: Compact iron cutting guillotine designed for cutting metal sections and profiles. Suitable for workshop and light industrial applications, offering reliable cutting performance with simple operation. Auction-ID: A7-45351-44

: neu : ca. 12 Wochen ab Auftrags : 1030 mm : 8 mm : 5 mm : 14 1/min : 3 ° : 7 : 500 mm : 7.5 kW : 100 l : 900 mm : 1550 mm : 1150 mm : 1600 mm : 1800 kg hydr. drive unit, completely integrated in the machine body overload safety, hydraulic and electrical adjusting of the cutting angle adjusting of the cutting gap blank holder pressure, adjustable support arm with angle stop and scale up to 600 mm 4 rotating knives for VA steel movable pedal switch with solenoid valves Motorised backgauge Central lubrication exchangeable machine table support section area lighting The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Offer 26093 Technical data: - Max. cutting length 3050 mm - Max. material thickness at 40 kg/mm², strength 2.5 mm - Cutting gap adjustment - Cutting angle 1°35 - Strokes 50 1/min - Stand projection 100 mm - Table height approx. 750 mm - Front angle stop 850 mm - 2 pieces support arms 500 mm - man. Backgauge can be operated from the front 5 - 750 mm - Sheet metal holding pneum. Supports - E – Footswitch - Drive 400 V / 5.5 kW - Space requirement approx. W 3800 x H 1500 x D 1400 mm - Weight approx. 2900 kg

Size: 550 mm Equipments: Air Table program Photocells defect

Cutting clearance: manual Condition of knives: good Minimum cutting angle: 0.5° Maximum cutting angle: 3° Number of hold-downs: 13 Length and number of plate carriers: 8x 500 mm 1x1000mm left stop + ruler Equipped with high-holding device: No Strokes per minute at smallest angle: 10-15 Strokes per minute at widest angle: 6 Working height: 770mm Auction-ID: A1-41991-5

Backgauge length: 750 mm (motorized) Control: SP 8 Cutting clearance: manual Condition of knives: good Minimum cutting angle: 0.5° Maximum cutting angle: 3° Number of hold-downs: 13 Length and number of plate carriers: 8x 500 mm 1x1000mm left stop + ruler Equipped with high-holding device: No Strokes per minute at smallest angle: 10-15 Strokes per minute at widest angle: 6 Working height: 770mm Auction-ID: A1-41991-3

Size: 720 mm Equipments: POLAR 72CE automatic cutting machine, 72 cm cut Hydraulic periscope cutting sight Standard equipment Stack height: 8 cm, Table depth: 72 cm 48 cuts/min.

Table shear cutting blade, replacement blades for table shears, replacement cutting edges, cutting blades, shear blades -Cutting blade: Replacement blade for guillotine shears -Cutting length: 870 mm -Hole spacing: 250 mm / Ø23 mm see photos -Quantity: 12x replacement blades available -Price: per piece -Dimensions: 870/23/H90 mm -Weight: 13.5 kg/pc.

Table shear cutting blade, replacement blades for table shears, replacement cutting edges, cutting blades, shear blades -Cutting blade: Replacement blade for guillotine shears -Cutting length: 1290 mm -Hole spacing: 240 mm / Ø13 mm see photos -Quantity: 8x replacement blades available -Price: per piece -Dimensions: 1290/15/H70 mm -Weight: 10.3 kg/pc.

Please note! The available forklift cannot load this machine, please bring your own suitable resources Auction-ID: A1-45188-2

Large working width: 4000 mm for sheet metal with a strength of 40 kg up to: 3 mm Table width: 470 mm Back gauge adjustment: 1000 mm Fixed cutting angle: 1°30' Column projection: 200 mm Hydraulic drive: 380 V, 7.5 kW Space requirement: 4650 x 1830 x 1420 mm high Weight: 5.7 t

Maximum cutting capacity: 3100 mm length at 6.35 mm thickness. Auction-ID: A1-41992-103

Guillotine, S/No 405387041, with Omron light guarding Auction-ID: A1-45187-161

2.5 guillotine, 1500mm, S/No 46071, Year 1986, 2.5mm max thickness, ANR 188 Auction-ID: A1-45187-218

Size: 1680 mm Equipments: Type: Perfecta 168 HTVC Program with touch screen Monitor Screen Air table (stainless steel) Air table Side tables with air (stainless steel): Left & right Safety cells Stack Lift Type: Pallet feeder Jogger Type: BASA 7