paper dry used for sale

Painting drying plant Giardina Forno Statico MOS 3D Masch. No. 050354 Built in 2006 User manual available This plant is in good condition, ready for operation. Changes, mistakes, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Drying slats for bricks, 1340 mm

Fluid Bed Dryer Type: DCRVF1200x7 Rationale: The material to be dried is placed on the inflow floor and fed there from bottom to top with the Drying air flows through. As a result, the good is heated with constant vibration and the moisture driven out. The vibration prevents the formation of bubbles in the fluidized bed of fine-grained products as well as the Segregation for products with a broad grain spectrum. The vibration also loosens up coarse grains and an almost complete emptying of the entire body. The dwell time of the product can be reduced by adjustment of the vibration. Specifications: Dryer width: 1200 mm Overall length: 7.0 m Length of the dry zone: 4.25 m Length of the cooling zone 2.75 m Tilt: horizontal Execution: · Air flow trough in welded steel construction with the necessary inlet and outlet openings · Exhaust hood with expansion zone, the necessar ...

The new powerful dry-running pumps: The ADH series is specially designed for solar developed for the demanding processes of the semiconductor and LED markets, With a suction capacity of 600-4500 m3/h. Semiconductors: High H2 pumping rate The performance of the ADH series brings the following advantages to the process: -ADL process performance: high pumping efficiency of light gases enables faster chamber emptying between process steps - Epitaxy and EUV: high pumping speed and high flow rate Tolerance meets the most demanding process specifications Adixen AD30K dry pump, high vacuum, AD 30 KL Manufacturer: Alcatel Adixen Type: AD30K.H Year of manufacture: 2008 Adixen AD100K.H Manufacturer: Alcatel Adixen Type: AD100K.H Year of manufacture: 2008 Vacuum pump: Manufacturer: AERZEN Type: GM 2000 CM-C Speed: 6000 rpm Voltage: 200-460 V Frequency (mineral oil/PFPE ...

Vötsch VTU 100/150 Heating and drying oven Manufacturer: Vötsch Type: VTU 100/150 Nominal temperature 250 °C Usable volume: 1500 m³ Total load: 400 kg Nominal power: 27 kW Connected load: 29 kW Rated current: 42 A Mains connection: 400 V, 3 PH+N PE, 50 Hz Weights: 780 kg Microprocessor-controlled temperature and program controllers Jumo Two-Point Controller Digital display of setpoint/actual value of temperature, plain text display Easy loading of the equipment floor via foldable drive-on ramp Dimensions Inside: (W x H x D) 1000 x 1500 x 1000 mm Outside: (W x H x D) 1840 x 2389 x 1450 mm More items - new and used - can be found in our shop! International shipping costs on request!

The "floor" of the dryer cooler consists of a nationwide, often special ventilation hopper system with downstream forced discharge. Depending on the customer application and products, this hopper system is additionally created with anumable fixtures. The roof-shaped design prevents the products from flowing freely. The filling and emptying of the cooler can be carried out continuously, fully automatically or in set / circulation. The standard cooler dimensions are 3x3 m and up to 18 meters high, depending on the number of superstructures, depending on the customer's requirements. for maize, cereals, rice, granules and other free-flowing products

Continuous dryers, tunnel furnaces, tunnel dryers, drying ovens, belt dryers for example semi-automatic flocking system Manufacturer: The parts to be dried are transported in a railway integrated in the dryer. Dimensions outside Width: approx. 3,860 mm Length: approx. 9,260 mm Height: approx. 1465 mm + base 1250 mm Dimensions Inside: Height approx. 820 mm without suspension track Width: approx. 3,230 mm Length approx. 9,000 mm

Automatic pile feeder Heating cylinder with oil system Rotary knife for end sheet Table delivery Machine checked and cleaned, in good working conditions.

Manufacturer: ESC – Europa-Siebdruck-Centrum GmbH & Co. KG Model designation according to nameplates: PAJD 1100-2C/IR and Perfection 1100 2C/IR Year of manufacture according to nameplates: 2016 and 2017 Machine/Factory Numbers: 9960-14-1065 / 11661 Electrical connection: 400 V, 50 Hz Rated current: 120 A (nameplate PAJD) Nominal power: 76 kW (Perfection nameplate) Degree of protection: IP40 Belt type: IR temperature tunnel with conveyor belt (width according to series: 1100 mm) Assembly: IR drying system for screen printing or varnishing processes Design: Closed safety enclosure with access doors Application: Drying/shortening of printed or coated components Location: Schierling Viewing possible by appointment.

B 60 W BP CAN (ROLLER) walk-behind scrubber drier  The B 60 W Bp Can walk-behind scrubber dryer is equipped with a travel drive, a maintenance-free 120 Ah battery (2 pieces) and a user-friendly key system. This system enables simple and safe operation by regulating access and operating rights to protect against misuse. The machine is ideal for cleaning textured floors and can cover areas up to 2,500 square meters. The brushes are quick and easy to install and replace. Thanks to the eco!efficiency level, the battery life is significantly extended, and the integrated tank flushing system makes it easier to clean the dirty water tank after floor cleaning. Trailing scrubber drier (60 l) with travel drive.  Ideal for 1000 - 2500 m².  Energy-saving eco! - efficiency level Proven double disc technology ■ Brush heads are quickly mounted or replaced. Powerful drive ■ Comfortab ...

Used milk powder plant made by FAM with Niro atomizer spray dryer. The powder plant consists of: 2-stage falling film evaporator type M-1 /A/: Technical data: 1. Raw material – skimmed milk - Dry matter content 9% - Temperature 5 °C - Feed stream 1,250 kg/h - Water evaporation capacity 1,000 kg/h 2. Product – condensed milk - Dry matter content 45% - Feed stream 250 kg/h - Temperature 45°C Spray dryer type Niro Atomizer R1 /A/: Technical data: 1. Raw material – skimmed milk - Feed stream 250 kg/h - Dry matter content 45-48% - Temperature 45 °C 2. Product – milk powder - Feed stream 100 kg/h - Water content 4% 3. Heating medium – saturated steam - Steam pressure at the air heater 1 MPa - Consumption 450 kg/h 4. Installed power 31 kW.

Used lab lyophilizer LyoQuest -55 ECO. YOM 2016. Available 2 pcs.

Hotmelt lamination line BC 62 Nordson Porous coating 80cm-1675mm full line with inline printing unit 2 unwinders, 1 rewinder 1 inline printing unit Hot melt lamination Hotmelt Laminator Hot melt lamination line Hot melt lamination stand Hot melt coating stand Hot melt coating line Nordson BC 62 Porous Coating Coating weight : 0.85-60 g/m2 Web width : 2400mm bm 200 bulk melter tank , heated hoses, hot melt applicator, Metering gear pump station and coating head • Hot melt application gsm : minimum 0.87 gsm/m2 • Hot melt application gsm : maximum 60 gsm /m2 • hot melts: SIS/SBS, PSA,EVA,PUR based

Used freeze drying lyophiliser made by Edwards. Used freeze drying unit with 8,4/6,72/5,04 m2 total shelf-surface for drying product in flasks 55 mm diameter and 100 mm hight. Technic based on the plant 5,04m2. 10/8/9/6 shelves 800x1050mm and one radiation shelf, shelf interdistances 75/94/125 mm. Shelf temperature -50/-48 C /+70 C. Ice capacity 100 kg. Ice condenser temperature -75 C. Chamber and ice condenser in details made of stainless steel 1.4541 / AISI 321. Two refrigeration system with two stage compressors and watercolled freon condenser, compressors DWM-Copeland, freon R502.

The new cold-regenerating adsorption dryer from Parker Zander combines proven and reliable elements of adsorption technology and impresses with a clear concept. Distinctive features of the K-MT adsorption dryer series such as • Adsorber profiles made of one piece • Separately controlled main and blow-out valves in leak-free design • Compact check valve combination, guarantee continuous operational reliability with high availability at the same time All adsorption dryers of the K-MT series have • Self-cleaning sieve trays on the wet side • High-quality desiccants In adsorption, desiccant stores the moisture contained in the compressed air. Parker Zander uses only high-capacity, high-capacity high-capacity molecular sieve type desiccant. This desiccant guarantees a long service life at high inlet temperatures or low pressure dew points. Regeneration takes place  ...

furnace 1200 Temperature range 10 - 1200C inner chamber dimensions 1x1x2m (possible various size) Auro door PLC Termička obrada metala, cementacija, kaljenje, poboljšanje, žarenje, otpuštanje, normalizacija, ispravljanje ručnom i hidrauličnom presom, plameno kaljenje Jamske peći sa zaštitnom atmosferom Za jamske peći sa zaštitnom atmosferom se koriste elektrootporni grejači i gasni gorionici. Mogu obavljati sledeće termičke obrade: Žarenje kaljenje otpuštanje poboljšanje rekristalizacija normalizacija Upoznavanje sa klasičnim i novim postupcima termičke obrade metalnih materijala kao što su odgrevanje, difuziono žarenje, heterogenizacija, rekristalizaciono žarenje, potpuno žarenje, meko žarenje, izotermalno žarenje, normalizacija, kaljenje sa i bez polimorfnog preobražaja, starenje i otpuštanje, sa posebnim osvrtom na postupke termohemijske obra ...

Used dryer Glatt WST 100/150. New 1997. Dismantled. No documentation. 2 pieces available.

Various ovens 1.5x1.5x3m Temperature 100 - 500 Celsius Öfen für die Wärmebehandlung Metalle einfache Härtesysteme Härterei-Zubehör Glühöfen Umluftöfen zum Glühen, Anlassen Salzbadöfen Schutzgasöfen Nitrieröfen und Plasmanitrieröfen Mehrzweckkammer-ofenanlagen kontinuierliche Ofenanlagen Vakuumprozesse Vakuumhärten Vakuumglühen, -anlassen, Nitrieren Vakuumlöten Metal Injection Moulding Induktionserwärmung Öfen für die Kunststofftechnik zum Trocken, Tempern, Polymerisieren, Einbrennen usw.; Ausführung als Kammeröfen, Haubenöfen, Herdwagenöfen, Schachtöfen; Herdwagen-Schmiedeöfen Umluftöfen Kammerofenlinien Nitrieröfen Plasmanitrieröfen Vakuumprozesse Schmelzöfen Trocknen Tempern Laboröfen Ersatzteile Termička obrada Off-line oblast termička obrada uključuje sledeće: 1. Linija se sastoji od 3 komora peći za spheroidizing žare ...

capacity 250 kg

with content Auction-ID: A1-44905-86

Auction-ID: A1-44905-202

Compressed air dryer, refrigeration dryer, dryer, compressed air refrigeration dryer -Drying capacity 1200 L / min -Max. Pressure: 13 bar -Operating voltage: 240 V -Dimensions: 485/350 / H450 mm -Weight: 23.5 kg

USED STAINLESS STEEL SPROUT-WALDRON 10 DRYER REF.: C6846 General characteristics: Manufactured by SPROUT-WALDRON Model 10 Material Stainless steel Weight 510 kg Motor characteristics: Rotational speed 910 rpm

Pink VT 1650-850-1950-14 vacuum tray dryer for a total of 42 trays/inserts with the dimensions of 500 x 800 mm (3 per shelve), usable inner dimensions of the chamber 1710 x 985 x 1950 mm (WxDxH), outer dimensions of the chamber 1940 x 1200 x 2230 mm (WxDxH), 13 shelves with the usable dimensions of 1650 x 850 x 110 mm (WxDxH), total shelf area approx. 19,6 m2, total of 14 shelves including floor, heating medium hot water, heating of the trays/inserts, floor and ceiling, maximum temperature 95 °C, maximum operating pressure vacuum chamber -1/+0.1 bar, maximum operating pressure heating system 3 bar, unladen weight approx. 3700 kg, (2 units available)

Used batch fluid bed dryer made by GLATT, model: WSG-C 60 made of stainless steel with spray granulation. 1100 kg/day capacity 40 kW power installed Max. air capacity 6000 m3/h Max. Static pressure 12000 Pa New 1995. The device equipped with: - air filter - fan - control cabinet - piping - tun removable - full documentation - CE. EX.

scrubber-dryer, floor cleaning machine, mop -Scrubber-dryer with drive -Working width: 850 mm -Practical area coverage: 2860 m²/h -Charger -with drive -Special suction foot guarantees maximum suction power at low cost.

geared motor, electric motor -Power: 0.6 kW -Protection class: IP 22 -Price: per piece -Quantity: 1 available -Dimensions: 340/260/H240 mm -Weight: 7.6 kg

Stock # U2352-4 Used stainless steel lab size mobile fluid bed dryer by Glatt model GPCG-1. Working volume of drying chamber up to 4.5 l. Operating pressure 0.79 bar. Machine is equipped with two stainless steel cones - one for coating process, second for drying. Coating cone is also equipped with 4 stainless steel screens. Nozzle not included. Electric power supply for heating 4 kW. Working temperature range from 10 up to 140 C. Dryer is equipped with centrifugal fan driven by el. motor 2.2 kW, 2850 rpm, 220-230/380-400 V, 50 hz. Compressed air - pressure 6 bar.

scrubber dryer, floor cleaning machine, mop machine -Handover in the current condition as inspected -Device is without battery brush and suction bar -Working width: 500 mm -Charger -Quantity: 1 piece available -Dimensions: 1150/520/H950 mm -Weight without battery: 66 kg

Compressed air dryer, refrigeration dryer -Max. Pressure: 16 bar -Operating voltage: 380 V -Dimensions: 1050/950/H1770 mm -Weight: 556 kg

Refrigeration compressor, refrigeration unit, cooling compressor, refrigeration unit, cooling compressor, compressor, filter dryer housing, filter dryer -Manufacturer: Alco, filter dryer -Type: ADK-305 -Pressure: up to 31 bar -Contents: 0.73 liters -Dimensions: Ø 80 x 265 mm -Weight: 1.4 kg

UV dryer, UV lamp, UV high-performance lamp, infrared dryer, UV dryer system, UV surface heater -Manufacturer: Hönle, UV drying system for drying paints, varnishes and plastics -Type: Uvaprint 420 HPLK, incl. lamp -Number: 4x UV dryers available -Price: per piece -Dimensions: 600/355/H140 mm -Weight: 16 kg/piece

USED INGERSOLL RAND NON-CYCLING REFRIGERATED AIR DRYER

Ride-on scrubber dryer, scrubber dryer, floor cleaning machine, mop machine, floor cleaner -Manufacturer: Hako, scrubber dryer with traction drive -Type: Scrubmaster B30 -Voltage: 24 V / 1.1 kW -Battery: 2x Hoppecke 12 V 80 Ah, see photo -Dimensions: 1250/780/H1100 mm -Weight: 151 kg

Stock# UG6345 Unused atmospheric cabinet dryer by Airflow Premier Industrial Oven (UK). Chamber construction mild steel. Inside dimensions of drying chamber: W 3250 mm x D 1850 mm x H 2050 mm. Working temperature range up to 60C. Dryer is equipped with 2.2 kW centrifugal fan, whch can give air circullation up to 4.2 air change per minute. Heating - electric - 15 x el heaters each with power 3 kW. Outside dimensions: W 3500 mm x H 2900 mm x D 2200 mm. Machine has local control panel.

Granule dryer, granule drying plant, granule conveyor, vacuum conveyor, vacuum station -Manufacturer: Heliostat granule dryer without drying container -Type: Heliostat WFAT-8490 -Individual components: see photos -Dimensions: 1360/1340/H1910 mm -Weight: 757 kg/unit

Nautical vacuum dryer Nautical vacuum dryer Hosokawa Alpine