paper dry used for sale

14.5 bar, 22.80 m3/min, refrigerant R 404a.

14.5 bar, 43.50 m3/min, refrigerant R 404a.

max. 14,5 bar, 43,50 m3/min, Refrigerant R 404a.

max. 16.0 bar, 46.67 m3 rpm. Caeltemittel R 404a

max. 16.0 bar, 65.0 m3/min. caelte agent R 404a.

max. 16,0 bar, 65,0 m3/min. Refrigerant R 404a.

SOMOS plastic dry-air-dryer for D200 with voltage regulator 230V Dry air flow rate: 200 m3/h Heating capacity dry air: 8.1 kW Regeneration heating capacity: 8.1 kW Drive capacity: 0.9 kW Connected Waterberg days: 17.1 kW Completely overhauled with 1 year guarantee Drying hopper, vacuum conveying system and package spare parts can be offered on demand.

Stacking mass (LxWxH)- 16m x 1.4m x 1.6m fully automatic drying via computer Heating capacity - 90 kW Top Condition

Year of construction 1994 Stack mass: Depth - 2.40 meters High - 3.00 mtr Long - 11.50 meters Drying capacity - са.75 m3 gross Fans - 7 х 0.75 квт Chamber construction - container construction is not desmantlebel! Interior trim - Aluminium welded 2.0 mm Insulation - rock wool 80 mm Outdoor installation Electrical cabinet with computer control system MB-400 Very good condition

Used line for smoothing, separation and drying of small-sized objects made of zinc alloy, brass, aluminum, carbon steel, stainless steel and steel. The line consists of: Temper mill vibration made by Ebra, model EVP-RA 315, new 2006: - Tank capacity of 400 L, - Working capacity of 265 L, - Depth 530 mm working channel, - Weight (without charge and cover) 680 kg, - Dimensions: A x H, fi 1320 x 1060 mm Separator made by Ebra, model TM-350 K, new 2006: - Payload 1000 kg / h, - Engine power of 0.37 kW, - The speed of rotation of the drum 21 rpm - Engine speed 142 rpm, - Transmission chain 5/8 " - Dimensions: width 1000 mm, depth 1200 mm, height 1600 mm Vibration dryer made by Ebra, model EVK-350, new 2006: - Drying tank capacity 300 L. - The capacity of the drying agent 100 L. - Width 380 mm working channel, - Weight (without charge and cover) 610 kg - Documentation avail ...

Material: Stainless steel Built: 1993 Content: 1770 ltr Pressure inside: 0.5bar Pressure outside: 10bar Weight: 5000 kg L x W x H: 4700mm/900mm/1200mm An indirect heat exchanger with mechanical material transport. Very good condition. YOU ARE A NEW, OUTDATED AND USED

max. 10.50 bar, 99.80 m3/min, caelte agent R 404a, water-covered.

Make : Wolf Built: 1995 Dimensions: 4.0 m x 7.0 m x 2.9 m (approx. WxLxH) Supply ceiling : Filter blanket Lamps: 7 pcs recessed luminaires with 4 x 58 W each Entrance side: 2-leaf gate 2.4 m x 2.8 m (approx. WxH), glazed Escape door: 0.65 m x 2.8 m (approx. WxH), 2 pieces right and left Roller door: 6.0 x 2.5 m (approx. WxH), between painting cabin and dryer Rusting : Full-surface rusting 5x13 pcs. 790x495 mm Transverse travel unit: 8 pcs trolleys Heating unit: 267 kW Burner : Gas burner Dry temperature: 80 degrees C Supply air unit: 22,800 m3/h; 7.5 kW; 960 rpm, V-belt Exhaust unit: 22,500 m3/h; 7.5 kW; 960 rpm, V-belt Pipes : supply and exhaust air pipes, deflector hood, etc. Electrics : Control cabinet Drying cabin: Dimensions: 4.0 m x 7.0 m x 2.9 m (approx. WxLxH) Supply ceiling : Filter blanket Lamps: 1 pc. recessed lamp with 4 x 58 W each Entrance side: 2-le ...

max. 10,50 bar, 99,80 m3/min, Refrigerant R 404a, water cooled.

Material: stainless steel Engine: 57 / 40 kW Weight: 7500 kg Length x Width x Height: 2900 mm x 1650 mm x 2000 mm Nominal volume : 2500 ltr. Working pressure : 5 bar electric input power : 380 volt / 50 hertz. Machine with withdrawable mixing device. You can also get the entire system with all components you need. Write us below!

Very good condition, like new. We plan and build the whole plant exactly for your needs. Are you looking for something else? Write us below!

Material: stainless steel Engine: 37 kW Content: 600 ltr Pressure (inner): 6 bar Weight: 750 kg Length x Width x Height: 2500 mm x 950 mm x 1500 mm Very good conditon, ready to work. Do you look for whole plant or have a questions? We have more then 1000 used machines on stock.

Compressed air refrigeration dryer Kaeser TH 451 16.00 bar, 45.00 m3/min.

Holzhackschnitzeltrocknersilo with holding (Kette-Schnecke/chain sponsor, engine achievement 1.1 kw, diminished, verladebereit, on 1 truck possibly you deliver size for 60 srm, good state Bj.2006, an offer price is Net. VB

Compressed air refrigerant dryer Kaeser TH 451 16,00 bar, 45,00 m3/min.

Painting booth: Make : Wolf Taifuno Dimensions: 4.0 m x 8.0 m x 2.9 m (approx. WxLxH) Supply ceiling : Filter blanket Lamps: 2 x 4 pcs recessed luminaires with 4 x 58 W each Entrance side: 2-leaf gate 2.4 m x 2.8 m (approx. WxH), glazed Escape door: 0.65 m x 2.8 m (approx. WxH) Roller door: 6.0 x 2.2 m (approx. WxH), between painting cabin and dryer Rusting : Full-surface rusting 5x15 pcs. 790x495 mm, support rod 790x50x3 mm Heating unit: 209 kW, gas burner Dry temperature: 80 degrees C Supply air unit: 24,800 m3/h; 11 kW; 1000 rpm, V-belt Exhaust unit: 24,300 m3/h; 11 kW; 1000 rpm, V-belt Energy saving: speed control with frequency inverter and heat recovery Pipes : supply and exhaust air pipes, deflector hood, etc. Electrics : Control cabinet Drying cabin, double dryer: Dimensions: 5.1 m x 7.0 m x 3.0 m (approx. WxLxH) Supply ceiling : Filter blanket Lamps: 1 pc. r ...

Compressed air refrigeration dryer Atlas Copco FD 1000 VSD A 13 bar, 60 m3/min. Frequency controlled, volume flow 0-60 m3/min.

Compressed air refrigerant dryer Atlas Copco FD 1000 VSD A 13 bar, 60 m3/min. Variable speed drive. Volume flow 0-60 m3/min.

Compressed air refrigeration dryer Atlas Copco FD 1250 VSD A 13 bar, 75 m3/min. Frequency controlled, volume flow 0-75 m3/min.

Compressed air refrigerant dryer Atlas Copco FD 1250 VSD A 13 bar, 75 m3/min. Variable speed drive. Volume flow 0-75 m3/min.

; ready for operation

Compressed air refrigeration dryer Hiross PG 0900 12 bar, 90 m3/min.

Compressed air refrigerant dryer Hiross PG 0900 12 bar, 90 m3/min.

UniMaster STS, the space-saving solution with a standing container! Standard with all fittings, such as an electromagnetic valve or pressure switch with relief valve for fully automatic operation, motor protection, safety valve, pressure gauge, check valve, condensation tap and shut-off valve V-cylinder driven 2-cylinder unit with two-stage compression for 10 bar pressure increases performance and ensures a high efficiency. Intermediate and aftercoolers ensure a rapid cooling of the generated compressed air Large fan flywheel for optimal cooling With refrigeration dryer and bypass line With complete module Öwadry, consisting of: refrigeration dryer, pre-filter and oil-water separator (only for DKS version) Safety tub optionally available Technical data: - Pressure 10 bar - intake capacity 660 l/min - eff. Delivery quantity 520 l/min - drive power 4.0 kW - speed 1025 rpm. - Container vol ...

Engine type: dry air dryers for plastic Year of manufacture: Overhauled 2017 Color: Turquoise Dry air flow: 10 m ³/h Dry air heating power: 1.1 kW Drive capacity: 0.4 kW Total final value: 1.5 kW Width: 84cm depth: 49, 5cm height: 220cm weight: 80kg Additional information: drying hopper 25 l GRP Completely overhauled with guarantee (not on wearing parts) Storage location: Germany Machine type: Dry air dryer for plastics Year of manufacture: Overhauled 2017 Colour: Turquoise Dry air flow rate: 10 m³/h Heating capacity dry air: 1.1 kW Drive capacity: 0.4 kW Connected Waterberg days: 1.5 kW width: 84cm depth: 49.5cm height: 220cm weight: 80kg Additional information: dry air hopper 25l overhauled with guarantee (not for wearing parts) Location: Germany

According to the description below

Air dryer Mobile for 17-24 Nqm/h 219W.

Compressed air refrigerant dryer Atlas Copco FD 1600 FS 13.00 bar, 96.00 m3/min, Refrigerant R 404a

The plant is 6 months old and is being abandoned due to conversion of production. The plant is still in use today, so it can be visited in operation. The installation site was an all-round closed hall, so the system is as good as new and enables the economic use of heat energy. In addition, the electric feed-in tariff for the electricity generated in your CHP is improved. 3 cent CHP bonus according to EEG-2009 per kilowatt hour used. There are 2 containers of wood chips/firewood (35m3) to be connected. NOTE TO PICTURES: Plant can only dry 2 containers and is half as wide as shown on pictures. Construction analogous to drying system for 4 containers! Drying time wood chips: 4 days (fresh forest to 10% residual moisture) Drying time log wood (33cm): 5 days (fresh from the forest to 20% core moisture) System consists of: intake hopper for air incl. dust filter Blower unit ( ...

Vibration machine for drying and sieving of sand. The machine consists of a welded construction mounted on conveyor elements, with 2 Electric Vibrators as drive. An electric heater with built-in blower is located at the end of the conveyor belt. Below the conveyor trough a sieve box is mounted in the area of the sand outlet. The dynamic forces that are emitted from the machine to the ground only about 100 N amount due the shock mount on the spring elements. The amplitude and therefore the flow rate can be set by adjusting the unbalances on the motors. The machine is due to the simple design nearly stör - and maintenance-free. The static frequency converter has a range of 10 to 32 Hz Length: 3.5 m Width: 1.2 m Height: 1.4 m Weight: 220kg

Wood chip dryer, firewood dryer for 4 containers The plant is abandoned due to conversion of the production. The plant is still in use today, so it can be visited in operation. The installation site was an all-round closed hall, so the system is as good as new and enables the economic use of heat energy. In addition, the electric feed-in tariff for the electricity generated in your CHP is improved. 3 cent CHP bonus according to EEG-2009 per kilowatt hour used. 4 containers of wood chips/firewood can be connected ( 35m3). Drying time wood chips: 4 days (fresh forest to 10% residual moisture) Drying time log wood (33cm): 5 days (fresh from the forest to 20% core moisture) System consists of: intake hopper for air incl. dust filter Blower unit (radial fan with motor 11kW) Heater 480kW Funnel for air flow incl. 4 shut-off valves and & 4 pieces connections Power con ...

Drying Cabinet Manufacturer: Hüttlin Model: Hüttlintrockenschrank Serial No.: T 1141 Material: 1.4301 Dimensions outside: Depth: 1.200 mm Width: 2.100 mm Height: 2.200 mm Dimensions inside: Depth: 1.000 mm Width: 1.400 mm Height: 1.900 mm Housing, base frame and product area completely made of stainless steel!

Mobile double drum dryer with many setting possibilities. Can be used in a 20 ' container be fitted and used as mobile plant. Wolf heating unit WLE-S can be converted at any time also to gas operation 140KW, oil burner Elko Kloeckner, type EK 02. Fan unit with 12,000 m³/h, 5,5KW, 955 1/min drying temperature up to 220 ° C depending on the drying goods. With heavy dust separator and air filter. Air to air heat exchanger for indirect heating - no exhaust in the drying air!

Kaeser DC444E Dryer.

Used stainless steel fluid bed dryer made by Glatt model WST CD 30. New 1988. Pressure 2 bar. 15 KW ventilator, air heater and cyclones included. Unit still installed. Control Panel.

Technical data: Kreuzmayr Obsttrockenschrank OTS 22, 22 m² surface dry, electrically heated, with temperature and humidity control power 7.5 of kW, full stainless steel for drying fruits, vegetables, meat,... Condition: new (Errors and omissions in the technical data, information and prices and subject to prior sale.)

Used tray vacuum dryer 2 m3 Chemix

Make : Wolf Built: 1993 Dimensions: 1.3 m x 1.0 m x 2.6 m (approx. WxLxH) Heating unit: 140 kW Burner : Gas burner Dry temperature: max. 80 degrees C Circulating air unit: 12,000 m3/h; 5.5 kW; 1100 rpm Sales price: € 2,950,- net, from stock Herzogenaurach We have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please ask.

Make : Wolf Type: WLE-S-180 Built: 1993 Dimensions: 1.3 m x 2.2 m x 2.6 m (approx. WxLxH) Heating unit: 209 kW Burner : Gas burner Dry temperature: max. 80 degrees C Circulating air unit: 14,000 m3/h; 7.5 kW; 1435 rpm Location : Camp Herzogenaurach Sales price: € 2,990,- net, from location This plant is already on sale, similar we have in stock. We have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please contact us, tel. 0171-9508841.

Used vacuum tray dryer made by Chemix, capacity 1m3.

-for the cleaning of scrap electronics type 1 by means of compressed air -Health dust can be removed by the suction system -Volume flow at least 1000-15000 m3/h -can also be used for the venting of picture tubes -Weight 210 kg -Outer dimensions 950 x 1200 x 1900 mm -Retract height 850 mm -Ball roller 920 x 1050 mm -Ø fresh air/extraction each 125 mm -Ø ERGO-grip a 220 mm -Manual available

Labotek Dry-air-dryer type DCD1200 with microprocessed control, 7 hoppers each 200l and conveyor Labotek con-Evator Type PGT4 Dry air flow rate: 1200 m3/h Capacity: 28 kW, 50 A completely overhauled with 1 year guarantee

SOMOS Dry-air-dryer R70 with 3 x hopper 200l, GFK with front door with sight glass, 2 x heating, automatic air Regulation, return air cooler, mobile. microprocessor control Dry air flow rate: 70 m3/h Heating capacity dry air: 6 kW Heating capacity Regeneration: 6 kW Drive capacity: 0,6 kW Connected wattage: 6,6 kW Completely overhauled with 1 year guarantee Vacuum conveying System and spare parts package can be offered on demand.

Different model variants. Distinct areas of application. Please ask.

NEW TUEV acceptance behind them. Sell the machine because we don't need it at the time. If you have questions we are gladly available.