129,000 used machines on RESALE, but how to find them? Machine Search
The cutting waste falls onto the infeed conveyor belt (GFR), which is installed below the guillotine cutter. From here, the waste is transported onto the adjacent upward-moving conveyor belt (WFL) and disposed off in a paper container. The belt can be positioned to the right, to the left or in line with the infeed conveyor.
Single head Floor model with foot pedal heavy design adjustable side stops Several paper drills Drill holder 380 volts / 0.55 kW / 1.7 A
checked & cleaned double head standing model - foot pedal operated heavy duty construction adjustable side rulers several paper drills drilling chuck drill diameter 3 - 20 mm hole distance min 55mm / max 430mm required tools 380 Volt / 0,55 kW / 1,7 A
Double head Standing model with hand lever adjustable side stops Several paper drills fixed hole spacing standard 80 mm
Housing/partition wall for Polar cutting machines or stackers; width 228cm; Height 180cm. Housing/dividing wall for cutting machines or lifters Polar; width 228cm; hight 180cm.
Paper drilling machine Hang 114-30-4; good condition; cleaned and tested; 4 drill heads; drill lubrication; drilling cooling; speed regulation; Table lifting speed adjustable; Drilling distance 36-260mm; Insertion depth 6-130mm; Insert height max.65mm; endless drilling tape; Table size 600x480mm; new table; new hood; new belts. Paper drilling machine 114-30-4; good condition; cleaned and checked; four heads; drill cooling; lubricating device; variable drill speed; table lift speed adjustable; adjustable drill offset 36-260mm; insertion depth 6-130mm; stack height 65mm; cardboard band under drill; table size 600x480mm; new table; new cover; new belts.
Qty. 1 Second-hand paper production plant Mfc.: Voith Built: 1982 Modernised: 2001, 2006, 2012 Stopped: 2019 Paper program: GW/Pulp/DIP Width: 5.88 m Weight: 26 – 70 gsm Coating program: Width: 5.78 m Weight: 26 – 70 gsm - 2 x 18 gsm Scope of supply: Fourdrinier paper machine Stock preparation system Vacuum system Heat recovery Bleaching line Coating machine Prewinders Winders Overhead cranes
Quick cutting machine with 76cm cutting width Insert height 11cm Inlay depth 76cm Hydraulic pressure infinitely adjustable, 150daN-2500daN Program control, direct dimension input Electrical connection 400V/50Hz
Pile cutter with automatic paper pressing, 48cm cutting width .1 spare knives and cutting bars
Ref. 440 Paper drilling machine "Foellmer" Model: IR 12/2 Ma. Nr.: 851 / Year of construction 1992 2 adjustable drill heads Accessories: Technical documentation, cutting strips, drills, Wax paper strips Very neat condition. Tested / Test possible
Board cutter - board shear Make Robust Model 1400 Year 1980's Cutting length 140 cm Details Iron cast table 100 cm, front lay+small cut device, back lay Available Direct
Four head paperdriller Make Hang Model 106DTK4 Year 1975 Details 4 head paper driller with adjustable drilling heads Operation Electric footswitch, 2 speed Available Direct
Includes stand with rolls of paper and plastic, chair.
Double head paperdriller Make Elcos Model Double head Year 1990´s Details 2 head paper driller with adjustable heads Drill distance 45 - 150 mm Space behind drill heads 100 mm Operation Lever operated, single phase 240 Volts Available Direct
we have two Polar loaders model TR150BL-3 1) Year 2001 with stand-alone gripper arm - BM5125 - comes from a P137X 2) Bj 2008 model - BM5126 - comes from a P155X cutting machine For the use of the devices, a rear table feeding of the high-speed cutter is a prerequisite
Board cutter - board shear Make Schimanek Model 10-110 Year 1980's Cutting length 110 cm Details Iron cast table 72 cm, front lay+small cut device, back lay
Jogger Make Bourg Model jogger Year 1995 Size 58 x 38 cm Height adjustable Angle adjustable Available direct
Jogger - criss-cross delivery Make Bourg Model TA 860 Year 1995 Height adjustable Angle adjustable Details criss-cross function Available direct
Cutting machine Paper cutting machine Polar 58EM Year of construction: 1991 Very good condition!
- Program - Chromed air table - Air side table left / right - KNORR RLE-3-K jogger - Spare knife
number of heads: 2 drilling capacity diameter min.: 3 mm drilling capacity diameter max.: 20 mm serial no.: 26332 voltage: 280/220 V Dimensions (L/W/H): 80x120x170 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
number of heads: 2 drilling capacity diameter min.: 4 mm drilling capacity diameter max.: 12 mm serial no.: 26214 dimensions of press (L x W x H): 64 x 102 x 105 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
number of heads: 2 drilling capacity diameter min.: 2 mm drilling capacity diameter max.: 15 mm serial no.: 230 spindle distance: 45 - 120 mm bore depth: 50 mm Hole distance: 3/380 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
number of heads: 1 drilling capacity diameter min.: 4 mm drilling capacity diameter max.: 12 mm serial no.: number of spindles: 1 max. speed: 2800 U / min voltage: 220/380 V power required: 0,56 KW frequency: 50 Hz Dimensions (L/W/H): 70x50x90 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
number of heads: 2 0 drilling capacity diameter min.: 2 mm drilling capacity diameter max.: 14 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
number of heads: 1 drilling capacity diameter min.: 3 mm drilling capacity diameter max.: 10 mm serial no.: 14494 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
number of heads: 2 drilling capacity diameter min.: 2 mm drilling capacity diameter max.: 20 mm serial no.: 526S130 number of spindles: 2 max. speed: 2800 U / min voltage: 220/380 V power required: 0,56 KW frequency: 50 Hz Dimensions (L/W/H): 70x50x120 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
number of heads: 2 drilling capacity diameter min.: 2 mm drilling capacity diameter max.: 14 mm serial no.: 70010 Dimensions (L/W/H): 60x105x85 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
number of heads: 2 serial no.: 2257013 voltage: 220/380 V frequency: 50 Hz current: 2,16 / 1,25 A Electric capacity: 0,55 kw speed: 2800 U/min spindle distance: 80 mm range L-W-H: 120 x 80 x 100 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
number of heads: 2 drilling capacity diameter min.: 2 mm drilling capacity diameter max.: 8 mm serial no.: 71479 dimensions of press (L x W x H): 185 x 110 x 80 cm bore depth: 70 mm Stack height: 50 mm voltage: 380 V frequency: 50 Hz weight: ca. 160 kg Electric capacity: 0,75 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
number of heads: 4 drilling capacity diameter min.: 2 mm drilling capacity diameter max.: 20 mm voltage: 220/380 V frequency: 50 Hz Dimensions (L/W/H): 100x70x150 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
number of heads: 2 0 drilling capacity diameter min.: 2 mm drilling capacity diameter max.: 14 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Paper Cutting Machine EBA 551-06 LT Year of manufacture 2009 Price 4800 Euro FCA Essen
Qty. 1 Second-hand paper coating machine Mfc.: SBL Model: HCUV-350 automatic coating machine Built: 2003 Max. sheet size: 1060 x 740 mm. Min sheet size: 450 x 360 mm. Max. coating area: 1050 x 730 mm Spot coating Speed: 7200 sh/h Automatic feeder with vacuum IR dryer for better varnish heating UV dryer with 3 lamps and cooling system delivery stacker
Universal cutter Make Konrad Ströbel Model 500 Year 1970 Knives included the machine comes with an index cutting tool made of high quality metal and hardened shafts, 90 degree shart corner. (Dovrie) Available direct
maximum number of results exceeded
please refine your search
10 € 
